- 20 Mar, 2023 2 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230307211426.2331483-3-u.kleine-koenig@pengutronix.deSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Uwe Kleine-König authored
If pm_runtime_resume_and_get() failed before this change, two error messages were printed. One directly in sprd_spi_remove() and another by the device core as the return value is non-zero. The better handling of a failure to resume the device is to do the software related cleanup anyhow and only skip hardware accesses. This leaves the device in an unknown state, but there is nothing that can be done about that. Even in the error case, return zero to suppress the device core's error message. Signed-off-by:
-
- 17 Mar, 2023 4 commits
-
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: This series converts the atmel-quadspi driver to use the .remove_new() callback that doesn't return an int but void. The motivation is to not give driver authors a reason to (wrongly) believe that returning an error code was sensible error handling. In fact the spi core only emits a warning message in this case and otherwise continues as if the return value was zero. This usually yields resource leaks that sometimes can lead to exceptions later on. The atmel-quadspi driver is one of these drivers that got error handling wrong, this is fixed here and in the last patch the driver is converted to .remove_new() with the eventual goal to change .remove() to return void once all drivers are converted this way.
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20230317084232.142257-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
An early error exit in atmel_qspi_remove() doesn't prevent the device unbind. So this results in an spi controller with an unbound parent and unmapped register space (because devm_ioremap_resource() is undone). So using the remaining spi controller probably results in an oops. Instead unregister the controller unconditionally and only skip hardware access and clk disable. Also add a warning about resume failing and return zero unconditionally. The latter has the only effect to suppress a less helpful error message by the spi core. Fixes: 4a2f83b7 ("spi: atmel-quadspi: add runtime pm support") Signed-off-by:
-
Uwe Kleine-König authored
The pm resume call is supposed to enable two clocks. If the second enable fails the callback reports failure but doesn't undo the first enable. So call clk_disable() for the first clock when clk_enable() for the second one fails. Fixes: 4a2f83b7 ("spi: atmel-quadspi: add runtime pm support") Signed-off-by:
-
- 16 Mar, 2023 2 commits
-
-
Leonard Göhrs authored
The TSIZE register in CR2, to which the number of words to transfer is written, is only 16 Bit. This limits transfers to 65535 SPI _words_ at a time. The existing code uses spi_split_transfers_maxsize to limit transfers to 65535 _bytes_ at a time. This breaks large transfers with bits_per_word > 8, as they are split inside of a word boundary by the odd size limit. Split transfers based on the number of words instead. This has the added benefit of not artificially limiting the maximum length of bpw > 8 transfers to half or a quarter of the actual limit. The combination of very large transfers and bits_per_word = 16 is triggered e.g. by MIPI DBI displays when updating large parts of the screen. Signed-off-by:
Leonard Göhrs <l.goehrs@pengutronix.de> Acked-by:
Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20230310092053.1006459-2-l.goehrs@pengutronix.deSigned-off-by:
-
Leonard Göhrs authored
Add spi_split_transfers_maxwords() function that splits spi_transfers transparently into multiple transfers that are below a given number of SPI words. This function reuses most of its code from spi_split_transfers_maxsize() and for transfers with eight or less bits per word actually behaves the same. Signed-off-by:
-
- 14 Mar, 2023 1 commit
-
-
Lukas Bulwahn authored
With commit 721da5ce ("driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2"), ./scripts/checkkconfigsymbols.py indicated an unresolved reference to the config SYSFS_DEPRECATED in the SPI summary documentation. Simply, delete the sentence referring to the removed config there. Also update the documentation, as these sys/class entries should always be symlinks, as the commit message of the commit above suggests. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230314075609.5232-1-lukas.bulwahn@gmail.comSigned-off-by:
-
- 13 Mar, 2023 13 commits
-
-
Mark Brown authored
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>: After noticing new cases of casting away constness, I went over all spi_get_*() functions and their callers, and made the following changes: 1. Make all pointer parameters const where possible, 2. Remove unneeded casts, some not even related to constness.
-
Alexander Stein authored
This driver also supports various i.MX8 platforms. Add ARCH_MXC for selecting this driver without Layerscape support. Fixes: c6b15b24 ("spi: nxp-flexspi: Fix ARCH_LAYERSCAPE dependency") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230313083621.154729-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Krzysztof Kozlowski authored
Driver can match via ID or OF ID table, thus several OF-related methods will be unused. Mark the OF structures as __maybe_unused so compiler can drop them: drivers/spi/spi-rspi.c:1203:29: error: ‘qspi_ops’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230310222857.315629-16-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-sc18is602.c:318:34: error: ‘sc18is602_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-sh-msiof.c:1076:34: error: ‘sh_msiof_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-bcm-qspi.c:1460:34: error: ‘bcm_qspi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230310222857.315629-13-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-pxa2xx.c:1757:34: error: ‘pxa2xx_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Geert Uytterhoeven authored
Now the chip select APIs take const pointers, there is no longer a need to cast away constness. Fixes: 9e264f3f ("spi: Replace all spi->chip_select and spi->cs_gpiod references with function call") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/bc14c7c75f8d63c5c11f61f80daaa53b12bb15fb.1678704562.git.geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
The "spi" parameters of spi_get_chipselect() and spi_get_csgpiod() can be const. Fixes: 303feb3c ("spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod") Signed-off-by:
-
Geert Uytterhoeven authored
The "spi" parameter of spi_get_drvdata() can be const. dev_get_drvdata() has been taking a const pointer since commit 7d1d8999 ("i2c: Constify i2c_get_clientdata's parameter"). Signed-off-by:
-
Geert Uytterhoeven authored
The "spi" parameter of spi_get_ctldata() can be const. Signed-off-by:
-
Geert Uytterhoeven authored
There is never a need to cast a pointer to the same pointer type. Signed-off-by:
-
Mark Brown authored
Linux 6.3-rc2
-
- 12 Mar, 2023 12 commits
-
-
Linus Torvalds authored
-
Hector Martin authored
This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by:
Hector Martin <marcan@marcan.st> Reported-by:
Ilya <me@0upti.me> Reported-and-tested-by:
Janne Grunau <j@jannau.net> Reviewed-by:
Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
-
Mario Limonciello authored
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by:
Bell <1138267643@qq.com> Co-developed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Morten Linderud authored
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a0 ("tpm: Fix handling of missing event log") Tested-by:Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by:
Morten Linderud <morten@linderud.pw> Reviewed-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix a crash if mount time quotacheck fails when there are inodes queued for garbage collection. - Fix an off by one error when discarding folios after writeback failure. * tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix off-by-one-block in xfs_discard_folio() xfs: quotacheck failure can race with background inode inactivation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes and removal from Greg KH: "Here are four small staging driver fixes, and one big staging driver deletion for 6.3-rc2. The fixes are: - rtl8192e driver fixes for where the driver was attempting to execute various programs directly from the disk for unknown reasons - rtl8723bs driver fixes for issues found by Hans in testing The deleted driver is the removal of the r8188eu wireless driver as now in 6.3-rc1 we have a "real" wifi driver for one that includes support for many many more devices than this old driver did. So it's time to remove it as it is no longer needed. The maintainers of this driver all have acked its removal. Many thanks to them over the years for working to clean it up and keep it working while the real driver was being developed. All of these have been in linux-next this week with no reported problems" * tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: delete driver staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss() staging: rtl8723bs: Fix key-store index handling staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: "A single erratum fix for AMD machines: - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No impact to anything as those machines will fallback to XSAVEC which is equivalent there" * tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Disable XSAVES on AMD family 0x17 -
Linus Torvalds authored
Pull clone3 fix from Christian Brauner: "A simple fix for the clone3() system call. The CLONE_NEWTIME allows the creation of time namespaces. The flag reuses a bit from the CSIGNAL bits that are used in the legacy clone() system call to set the signal that gets sent to the parent after the child exits. The clone3() system call doesn't rely on CSIGNAL anymore as it uses a dedicated .exit_signal field in struct clone_args. So we blocked all CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced and reused a CSIGNAL bit we forgot to adapt clone3_args_valid() causing CLONE_NEWTIME with clone3() to be rejected. Fix this" * tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: test clone3 with CLONE_NEWTIME fork: allow CLONE_NEWTIME in clone3 flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmappingLinus Torvalds authored
Pull vfs fixes from Christian Brauner: - When allocating pages for a watch queue failed, we didn't return an error causing userspace to proceed even though all subsequent notifcations would be lost. Make sure to return an error. - Fix a misformed tree entry for the idmapping maintainers entry. - When setting file leases from an idmapped mount via generic_setlease() we need to take the idmapping into account otherwise taking a lease would fail from an idmapped mount. - Remove two redundant assignments, one in splice code and the other in locks code, that static checkers complained about. * tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: filelocks: use mount idmapping for setlease permission check fs/locks: Remove redundant assignment to cmd splice: Remove redundant assignment to ret MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug fixes and regressions for ext4, the most serious of which is a potential deadlock during directory renames that was introduced during the merge window discovered by a combination of syzbot and lockdep" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: zero i_disksize when initializing the bootloader inode ext4: make sure fs error flag setted before clear journal error ext4: commit super block if fs record error when journal record without error ext4, jbd2: add an optimized bmap for the journal inode ext4: fix WARNING in ext4_update_inline_data ext4: move where set the MAY_INLINE_DATA flag is set ext4: Fix deadlock during directory rename ext4: Fix comment about the 64BIT feature docs: ext4: modify the group desc size to 64 ext4: fix another off-by-one fsmap error on 1k block filesystems ext4: fix RENAME_WHITEOUT handling for inline directories ext4: make kobj_type structures constant ext4: fix cgroup writeback accounting with fs-layer encryption
-
Linus Torvalds authored
The cpumask_check() was unnecessarily tight, and causes problems for the users of cpumask_next(). We have a number of users that take the previous return value of one of the bit scanning functions and subtract one to keep it in "range". But since the scanning functions end up returning up to 'small_cpumask_bits' instead of the tighter 'nr_cpumask_bits', the range really needs to be using that widened form. [ This "previous-1" behavior is also the reason we have all those comments about /* -1 is a legal arg here. */ and separate checks for that being ok. So we could have just made "small_cpumask_bits-1" be a similar special "don't check this" value. Tetsuo Handa even suggested a patch that only does that for cpumask_next(), since that seems to be the only actual case that triggers, but that all makes it even _more_ magical and special. So just relax the check ] One example of this kind of pattern being the 'c_start()' function in arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on other architectures. Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/ Fixes: 596ff4a0 ("cpumask: re-introduce constant-sized cpumask optimizations") Signed-off-by:
-
- 11 Mar, 2023 6 commits
-
-
Mark Brown authored
Merge series from Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>: This patch is in the continuation to the discussions which happened on 'commit f8950430 ("spi: Stacked/parallel memories bindings")' for adding dt-binding support for stacked/parallel memories. This patch series updated the spi-nor, spi core and the spi drivers to add stacked and parallel memories support. The first patch https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@amd.com/ of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied due to merge conflict, so send the remaining patches in the series after rebasing it on top of for-next branch. --- BRANCH: for-next Changes in v6: - Rebased on top of latest v6.3-rc1 and fixed merge conflicts in spi-mpc512x-psc.c, sfdp.c, spansion.c files and removed spi-omap-100k.c. - Updated spi_dev_check( ) to reject new devices if any one of the chipselect is used by another device. Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer@gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (15): spi: Replace all spi->chip_select and spi->cs_gpiod references with function call net: Replace all spi->chip_select and spi->cs_gpiod references with function call iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call staging: Replace all spi->chip_select and spi->cs_gpiod references with function call platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call ALSA: hda: cs35l41: Replace all spi->chip_select references with function call spi: Add stacked and parallel memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +- drivers/iio/imu/adis16400.c | 2 +- drivers/mtd/devices/mtd_dataflash.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 665 +++++++++++++++--- drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 6 +- drivers/mtd/spi-nor/micron-st.c | 39 +- drivers/mtd/spi-nor/otp.c | 48 +- drivers/mtd/spi-nor/sfdp.c | 29 +- drivers/mtd/spi-nor/spansion.c | 50 +- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 22 +- drivers/mtd/spi-nor/winbond.c | 10 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/net/ethernet/adi/adin1110.c | 2 +- drivers/net/ethernet/asix/ax88796c_main.c | 2 +- drivers/net/ethernet/davicom/dm9051.c | 2 +- drivers/net/ethernet/qualcomm/qca_debug.c | 2 +- drivers/net/ieee802154/ca8210.c | 2 +- drivers/net/wan/slic_ds26522.c | 2 +- .../net/wireless/marvell/libertas/if_spi.c | 2 +- drivers/net/wireless/silabs/wfx/bus_spi.c | 2 +- drivers/net/wireless/st/cw1200/cw1200_spi.c | 2 +- .../platform/x86/serial-multi-instantiate.c | 3 +- drivers/spi/spi-altera-core.c | 2 +- drivers/spi/spi-amd.c | 4 +- drivers/spi/spi-ar934x.c | 2 +- drivers/spi/spi-armada-3700.c | 4 +- drivers/spi/spi-aspeed-smc.c | 13 +- drivers/spi/spi-at91-usart.c | 2 +- drivers/spi/spi-ath79.c | 4 +- drivers/spi/spi-atmel.c | 26 +- drivers/spi/spi-au1550.c | 4 +- drivers/spi/spi-axi-spi-engine.c | 2 +- drivers/spi/spi-bcm-qspi.c | 10 +- drivers/spi/spi-bcm2835.c | 19 +- drivers/spi/spi-bcm2835aux.c | 4 +- drivers/spi/spi-bcm63xx-hsspi.c | 30 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-bcmbca-hsspi.c | 30 +- drivers/spi/spi-cadence-quadspi.c | 5 +- drivers/spi/spi-cadence-xspi.c | 4 +- drivers/spi/spi-cadence.c | 4 +- drivers/spi/spi-cavium.c | 8 +- drivers/spi/spi-coldfire-qspi.c | 8 +- drivers/spi/spi-davinci.c | 18 +- drivers/spi/spi-dln2.c | 6 +- drivers/spi/spi-dw-core.c | 2 +- drivers/spi/spi-dw-mmio.c | 4 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsi.c | 2 +- drivers/spi/spi-fsl-dspi.c | 16 +- drivers/spi/spi-fsl-espi.c | 6 +- drivers/spi/spi-fsl-lpspi.c | 2 +- drivers/spi/spi-fsl-qspi.c | 6 +- drivers/spi/spi-fsl-spi.c | 2 +- drivers/spi/spi-geni-qcom.c | 6 +- drivers/spi/spi-gpio.c | 4 +- drivers/spi/spi-gxp.c | 4 +- drivers/spi/spi-hisi-sfc-v3xx.c | 2 +- drivers/spi/spi-img-spfi.c | 14 +- drivers/spi/spi-imx.c | 30 +- drivers/spi/spi-ingenic.c | 4 +- drivers/spi/spi-intel.c | 2 +- drivers/spi/spi-jcore.c | 4 +- drivers/spi/spi-lantiq-ssc.c | 6 +- drivers/spi/spi-mem.c | 4 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-microchip-core.c | 6 +- drivers/spi/spi-mpc512x-psc.c | 8 +- drivers/spi/spi-mpc52xx.c | 2 +- drivers/spi/spi-mt65xx.c | 6 +- drivers/spi/spi-mt7621.c | 2 +- drivers/spi/spi-mux.c | 8 +- drivers/spi/spi-mxic.c | 10 +- drivers/spi/spi-mxs.c | 2 +- drivers/spi/spi-npcm-fiu.c | 20 +- drivers/spi/spi-nxp-fspi.c | 10 +- drivers/spi/spi-omap-uwire.c | 8 +- drivers/spi/spi-omap2-mcspi.c | 24 +- drivers/spi/spi-orion.c | 4 +- drivers/spi/spi-pci1xxxx.c | 4 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 4 +- drivers/spi/spi-pl022.c | 4 +- drivers/spi/spi-pxa2xx.c | 6 +- drivers/spi/spi-qcom-qspi.c | 2 +- drivers/spi/spi-rb4xx.c | 2 +- drivers/spi/spi-rockchip-sfc.c | 2 +- drivers/spi/spi-rockchip.c | 26 +- drivers/spi/spi-rspi.c | 10 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-sc18is602.c | 4 +- drivers/spi/spi-sh-msiof.c | 6 +- drivers/spi/spi-sh-sci.c | 2 +- drivers/spi/spi-sifive.c | 6 +- drivers/spi/spi-sn-f-ospi.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/spi/spi-stm32-qspi.c | 12 +- drivers/spi/spi-sun4i.c | 2 +- drivers/spi/spi-sun6i.c | 2 +- drivers/spi/spi-synquacer.c | 6 +- drivers/spi/spi-tegra114.c | 28 +- drivers/spi/spi-tegra20-sflash.c | 2 +- drivers/spi/spi-tegra20-slink.c | 6 +- drivers/spi/spi-tegra210-quad.c | 8 +- drivers/spi/spi-ti-qspi.c | 16 +- drivers/spi/spi-topcliff-pch.c | 4 +- drivers/spi/spi-wpcm-fiu.c | 12 +- drivers/spi/spi-xcomm.c | 2 +- drivers/spi/spi-xilinx.c | 6 +- drivers/spi/spi-xlp.c | 4 +- drivers/spi/spi-zynq-qspi.c | 2 +- drivers/spi/spi-zynqmp-gqspi.c | 58 +- drivers/spi/spi.c | 225 ++++-- drivers/spi/spidev.c | 6 +- drivers/staging/fbtft/fbtft-core.c | 2 +- drivers/staging/greybus/spilib.c | 2 +- include/linux/mtd/spi-nor.h | 18 +- include/linux/spi/spi.h | 34 +- include/trace/events/spi.h | 10 +- sound/pci/hda/cs35l41_hda_spi.c | 2 +- 126 files changed, 1350 insertions(+), 615 deletions(-) -- 2.25.1
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "This marks the end of a transition to let I2C have the same probe semantics as other subsystems. Uwe took care that no drivers in the current tree nor in -next use the deprecated .probe call. So, it is a good time to switch to the new, standard semantics now. There is also a regression fix: - regression fix for the notifier handling of the I2C core - final coversions of drivers away from deprecated .probe - make .probe_new the standard probe and convert I2C core to use it * tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: Fix bus callback return values i2c: Convert drivers to new .probe() callback i2c: mux: Convert all drivers to new .probe() callback i2c: Switch .probe() to not take an id parameter media: i2c: ov2685: convert to i2c's .probe_new() media: i2c: ov5695: convert to i2c's .probe_new() w1: ds2482: Convert to i2c's .probe_new() serial: sc16is7xx: Convert to i2c's .probe_new() mtd: maps: pismo: Convert to i2c's .probe_new() misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
-
Andi Shyti authored
Use the kernel.org e-mail for the maintainer entry Signed-off-by:
Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20230311170516.178913-1-andi.shyti@kernel.orgSigned-off-by:
-
Richard Weinberger authored
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to blk_mq_end_request(). Add it back to have our IOs finished Fixes: 91cc8fbc ("ubi: block: set BLK_MQ_F_BLOCKING") Analyzed-by:
Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
Amit Kumar Mahapatra authored
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by:
Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Link: https://lore.kernel.org/r/20230310173217.3429788-9-amit.kumar-mahapatra@amd.comSigned-off-by:
-
Amit Kumar Mahapatra authored
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by:
-
