According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.

Fixes: b4fec647 ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 6.1

 - New machines

  * AMD's DaytonaX AST2600 BMC, for the amd64 server
  * Ampre's Mt. Mitchell AST2600 BMC, for the AmpereOne arm64 server

 - Fixes and updates for bletchley, mtjade, yosemitev2 and the ast2600-evb

* tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: ast2600-evb-a1: Add compatible
  ARM: dts: aspeed: ast2600evb: Fix compatible string
  ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers
  ARM: dts: aspeed-g6: Enable more UART controllers
  ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver
  ARM: dts: aspeed: Add AMD DaytonaX BMC
  dt-bindings: arm: aspeed: document AMD DaytonaX
  ARM: dts: aspeed: Yosemite V2: Enable OCP debug card
  ARM: dts: aspeed: mtjade: Remove gpio-keys entries
  ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC
  dt-bindings: arm: aspeed: document Ampere Mt.Mitchell BMC compatibles
  ARM: dts: aspeed: bletchley: Remove hdc1080 node
  ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
  ARM: dts: aspeed: ast2600-evb: Update I2C devices

Link: https://lore.kernel.org/r/CACPK8Xepnci+f+7Pi1jtXod8Jmt+OnJYfDRENjiP-xDBQwFCVg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

RK3399-Nanopi-R4S-enterprise as variant board, Gru-Scarlet SKU variants,
DSI support for rk356x, display-gamma-control for rk3399, display
output for quartz64-b and rk3566-roc-pc, hdmi supplies for rk3399-roc-pc,
some pinctrl improvements for the px30-evb and a number of changes to
bring rk3399 rock4 and rock-pi4 structure closer to names used in schematics.

* tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: use pin constant for reset-gpios on px30-evb
  arm64: dts: rockchip: add pinctrl for mipi-pdn pin on px30-evb
  arm64: dts: rockchip: set max drive-strength for cif_clkout_m0 on px30-evb
  arm64: dts: rockchip: add avdd-0v9-supply and avdd-1v8-supply on rk3399 rock 4c and pi4
  arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4
  arm64: dts: rockchip: fix regulator name on rk3399-rock-4
  arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4c-plus
  arm64: dts: rockchip: fix regulator structure on rk3399-rock-4c-plus
  arm64: dts: rockchip: connect vcca_1v8 to APIO5_VDD on rk3399-rock-4c-plus
  arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x
  arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
  arm64: dts: rockchip: Add RK3399 NanoPi R4S Enterprise Edition
  dt-bindings: Add doc for FriendlyARM NanoPi R4S Enterprise Edition
  arm64: dts: rockchip: add i2s0 I2S/PDM/TDM 8ch controller to px30
  arm64: dts: rockchip: Add HDMI supplies on rk3399-roc-pc
  arm64: dts: rockchip: Support gru-scarlet sku{2,4} variants
  dt-bindings: arm: rockchip: Add gru-scarlet sku{2,4} variants
  arm64: dts: rockchip: enable gamma control on RK3399
  arm64: dts: rockchip: Enable video output on rk3566-roc-pc

Link: https://lore.kernel.org/r/38114097.10thIPus4b@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The AST2600 EVB A1 is an AST2600 EVB.
Signed-off-by: Joel Stanley <joel@jms.id.au>

The AST2600 EVB is not an A1.
Signed-off-by: Joel Stanley <joel@jms.id.au>

Now that the pinctrl definitions of the ast2600 SoC have been fixed,
see commit 925fbe1f ("dt-bindings: pinctrl: aspeed-g6: add FWQSPI
function/group"), it is safe to activate QSPI on the ast2600 evb.

Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220603073705.1624351-1-clg@kaod.orgSigned-off-by: Joel Stanley <joel@jms.id.au>

Setup the configuration of UART6, UART7, UART8, and UART9 in
aspeed-g6.dtsi.
Signed-off-by: Ken Chen <j220584470k@gmail.com>
Link: https://lore.kernel.org/r/20220805090957.470434-1-j220584470k@gmail.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Removed NIC EEPROM driver IPMB-12 channel and enabled it as
generic i2c EEPROM.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Link: https://lore.kernel.org/r/20220914115307.GA339@hcl-ThinkPad-T495Signed-off-by: Joel Stanley <joel@jms.id.au>

Add initial version of device tree for the BMC in the AMD DaytonaX
platform.

AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Document AMD DaytonaX board compatible.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-2-aladyshev22@gmail.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Added IPMB-13 channel for Debug Card communication which improves the
readability of the machine and makes it easier to debug the server and
it will display some pieces of information about the server like "system
info", "Critical sensors" and "critical sel".
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495Signed-off-by: Joel Stanley <joel@jms.id.au>

Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Document Ampere Mt.Mitchell BMC board compatible.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817071539.176110-2-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Merge tag 'mvebu-dt-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt for 6.1 (part 1)

Add definitions for PCIe legacy INTx interrupts for dts using
pci-mvebu.c controller driver.

Add gpio-ranges for pin muxing for Armada 38x

Add audio support for Armada 38x

Turris-omnia (Armada 385 based) fix a pin name

lsxl (kirkwood based)
 - Fix fix serial line
 - Remove first ethernet port

* tag 'mvebu-dt-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: (22 commits)
  ARM: dts: turris-omnia: Add label for wan port
  ARM: dts: turris-omnia: Define S/PDIF audio card
  ARM: mvebu: Add spdif-pins mpp pins for Armada 38x
  ARM: mvebu: add audio support to Armada 385 DB
  ARM: mvebu: add audio I2S controller to Armada 38x Device Tree
  ARM: dts: armada-38x: Add gpio-ranges for pin muxing
  ARM: dts: dove: Add definitions for PCIe error interrupts
  ARM: dts: kirkwood: Add definitions for PCIe error interrupts
  ARM: dts: armada-39x.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-380.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-375.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-xp-mv78460.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-xp-mv78260.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-xp-mv78230.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-xp-98dx3236.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: armada-370.dtsi: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: dove: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: kirkwood: Add definitions for PCIe legacy INTx interrupts
  ARM: dts: kirkwood: lsxl: remove first ethernet port
  ARM: dts: kirkwood: lsxl: fix serial line
  ...

Link: https://lore.kernel.org/r/87edw2xfle.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps

A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.

* tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices
  ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices
  ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device
  ARM: dts: am335x-baltos: add GPIO names for ir2110 device
  ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
  ARM: dts: am335x-baltos: change nand-xfer-type

Link: https://lore.kernel.org/r/pull-1663587735-853102@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt64-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt64 for 6.1 (part 1)

 - Add UART1-3 for AC5/AC5X SoC
 - Improve uDPU support (Aramda 3720 based board)
 - Add new eDPU based on uDPU

* tag 'mvebu-dt64-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios
  arm64: dts: marvell: add support for Methode eDPU
  dt-bindings: marvell: armada-37xx: add Methode eDPU compatible
  arm64: dts: marvell: split Methode uDPU DTS
  arm64: dts: marvell: rename temp sensor nodes
  arm64: dts: marvell: uDPU: remove LED node pinctrl-names
  arm64: dts: marvell: uDPU: align LED-s with bindings
  arm64: dts: marvell: uDPU: add missing SoC compatible
  arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatible
  dt-bindings: marvell: convert Armada 37xx compatibles to YAML
  dt-bindings: vendor-prefixes: add Methode Electronics
  arm64: dts: marvell: Add UART1-3 for AC5/AC5X

Link: https://lore.kernel.org/r/87h70yxfmy.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Device tree label property should contain label from the box/stick.
Labels for other ports are already specified in DT but wan is missing.
So add missing label for wan port.

Fixes: 26ca8b52 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Turris Omnia has GPIO51 exported on pin header U16, which works in S/PDIF
output mode. So define S/PDIF audio output card for this pin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

S/PDIF function on Armada 38x uses only mpp51 pin. So add spdif-pins mpp
pins section for it. It is needed for boards without i2s.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

This commit adds the necessary Device Tree information to enable
audio support on the Armada 385 DB platform. In details it:

 * Instantiates the CS42L51 audio codec on the I2C0 bus

 * Adds simple-card DT binding for audio on Armada 385 DB

 * Adds description for both analog I2S and S/PDIF I/O

 * Disabled by default
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Star_Automation <star@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

This commit adds the description of the I2S controller to the Marvell
Armada 38x SoC's Device Tree, as well as its pin configuration.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
[pali: Fix i2s-pins name]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DTS updates for 6.1

Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.

MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.

On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.

The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.

On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.

On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.

SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.

With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.

UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.

Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.

A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.

* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
  arm64: dts: qcom: sc7280: Add required-opps for USB
  arm64: dts: qcom: sm8450: fix UFS PHY serdes size
  arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
  arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
  arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
  arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
  arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
  arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
  dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
  arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
  arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
  dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
  arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
  arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  arm64: dts: qcom: align SDHCI reg-names with DT schema
  arm64: dts: qcom: sm8250: provide additional MSI interrupts
  arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
  arm64: dts: qcom: Use WCD9335 DT bindings
  arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
  arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
  ...

Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM DTS updates for 6.1

This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.

The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.

MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.

A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.

* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
  ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
  ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
  ARM: dts: qcom: msm8226: Add ADSP node
  ARM: dts: qcom: ipq8064: pad addresses to 8 digit
  ARM: dts: qcom: ipq8064: reorganize node order and sort them
  ARM: dts: qcom: align SDHCI clocks with DT schema
  ARM: dts: qcom: align SDHCI reg-names with DT schema
  ARM: dts: qcom: msm8960: add clocks to the MMCC device node
  ARM: dts: qcom: apq8064: add clocks to the MMCC device node
  ARM: dts: qcom: msm8960: add clocks to the GCC device node
  ARM: dts: qcom: apq8064: add clocks to the GCC device node
  ARM: dts: qcom: msm8960: add clocks to the LCC device node
  ARM: dts: qcom: apq8064: add clocks to the LCC device node
  ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
  ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
  ARM: dts: qcom: msm8660: fix node names for fixed clocks
  ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
  ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
  ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
  ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
  ...

Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt

TI K3 device tree updates for v6.1

New Features:
AM62A:
* Basic support for AM62A SoC and SK Board
AM62:
* EPWM support
AM64:
* GPMC, LED, Crypto accelerator support

Fixes:
J7200 pinmux node update
Fixes for Crypto and RNG accelerators on AM65, J721e, J7200

Cleanups:
Reorder SoC compatible and pinmux macros alphabetically

* tag 'ti-k3-dt-for-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (22 commits)
  arm64: dts: ti: k3-j7200: fix main pinmux range
  arm64: dts: ti: Add support for AM62A7-SK
  arm64: dts: ti: Introduce AM62A7 family of SoCs
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62A
  dt-bindings: arm: ti: Add bindings for AM62A7 SoC
  dt-bindings: arm: ti: Rearrange IOPAD macros alphabetically
  arm64: dts: ti: k3-am625-sk: Add epwm nodes
  arm64: dts: ti: k3-am62-main: Add epwm nodes
  arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
  arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node
  arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL
  arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID
  arm64: dts: ti: k3-am65-main: Disable RNG node
  arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries
  arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node
  arm64: dts: ti: k3-am64-main: Add GPMC memory controller node
  arm64: dts: ti: k3-j721e-main: fix RNG node clock id
  arm64: dts: ti: k3-am64-main: Enable crypto accelerator
  arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges
  arm64: dts: ti: k3-am64-main: Add main_cpts label
  ...

Link: https://lore.kernel.org/r/44729b46-27f9-94a0-17ed-8868649a4a0a@ti.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v6.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v6.1 (take two)

  - Merge Renesas ARM/ARM64 maintainers entries,
  - CAN support for the RZ/N1 SoC and the RZN1D-DB development board,
  - Watchdog, pin control, I2C (EEPROM), GPIO (LEDS/switches), and
    Ethernet support for the R-Car V4H SoC and the White Hawk
    development board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v6.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (26 commits)
  arm64: dts: renesas: Adjust whitespace around '{'
  arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS
  arm64: dts: renesas: rzg2ul-smarc-som: Drop enabling wdt2
  ARM: dts: renesas: Fix USB PHY device and child node names
  arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
  arm64: dts: renesas: white-hawk-cpu: Add missing bootargs
  arm64: dts: renesas: spider-cpu: Add missing bootargs
  arm64: dts: renesas: spider: Move aliases and chosen
  arm64: dts: renesas: white-hawk-cpu: Add Ethernet support
  arm64: dts: renesas: white-hawk: Move aliases and chosen
  arm64: dts: renesas: r8a779g0: Add RAVB nodes
  arm64: dts: renesas: white-hawk-cpu: Add push switches
  arm64: dts: renesas: white-hawk-cpu: Add GP LEDs
  arm64: dts: renesas: r8a779g0: Add GPIO nodes
  arm64: dts: renesas: white-hawk: Add Ethernet sub-board
  arm64: dts: renesas: white-hawk: Add CSI/DSI sub-board
  arm64: dts: renesas: white-hawk: Add I2C0 and EEPROMs
  arm64: dts: renesas: r8a779g0: Add I2C nodes
  arm64: dts: renesas: white-hawk-cpu: Add serial port pin control
  arm64: dts: renesas: r8a779g0: Add pinctrl device node
  ...

Link: https://lore.kernel.org/r/cover.1663588776.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.0-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt6795:
- add add system timer node

mt7986a:
- add wifi support

mt8183:
- add MDP3 and keypad

mt8186:
- basic support for the Evaluation Board including, i2c, usb and uart.

mt8192:
- add nodes to support PWM, MIPI transciever, display with GCE and DSI.

mt8195:
- disable nodes not used on all boards
- Add support for CPU freq, clocks, power domain controller, spmi, scp.
- Enable audio decoder, DSP, IOMMU, mailbox.
- Add display nodes for vdosys0.
- On Cherry based chromebooks, enable the system companion processor,
  Cross EC, Google Security Chip, secondary MMC controller, trackpad and
  a few regulators.

* tag 'v6.0-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (34 commits)
  arm64: dts: mediatek: mt6795: Add CPUX system timer node
  arm64: dts: mt7986: add built-in Wi-Fi device nodes
  arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus
  arm64: dts: mediatek: cherry: Enable Elantech eKTH3000 i2c trackpad
  arm64: dts: mediatek: cherry: Enable secondary SD/MMC controller
  arm64: dts: mediatek: cherry: Add keyboard mapping for the top row
  arm64: dts: mediatek: cherry: Add Google Security Chip (GSC) TPM
  arm64: dts: mediatek: cherry: Wire up the ChromeOS Embedded Controller
  arm64: dts: mediatek: cherry: Enable the System Companion Processor
  arm64: dts: mediatek: Fix build warnings of mt8173 vcodec nodes
  arm64: dts: mediatek: Add missing xHCI clocks for mt8192 and mt8195
  arm64: dts: mt8192: Add dsi node
  arm64: dts: mt8192: Add display nodes
  arm64: dts: mediatek: Add mmsys #reset-cells property for mt8192
  arm64: dts: mt8192: Add mipi_tx node
  arm64: dts: mt8192: Add pwm node
  arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile
  arm64: dts: mt8195: Add display node for vdosys0
  arm64: dts: mt8195: Add gce node
  arm64: dts: mt8195: Add iommu and smi nodes
  ...

Link: https://lore.kernel.org/r/3b915692-c8a9-c508-5a4a-0fdb49355e99@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The DT parser is dependent on the PCI device being tagged as
device_type = "pci" in order to parse memory ranges properly.
Fix this up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

- Allwinner A100 DMA node
- Allwinner H6 GPU devfreq scaling
- sunxi sram bindings cleanup and D1 addition

* tag 'sunxi-dt-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  dt-bindings: sram: sunxi-sram: Add D1 compatible string
  dt-bindings: sram: sunxi-sram: Clean up the compatible lists
  arm64: dts: allwinner: beelink-gs1: Enable GPU OPP
  arm64: dts: allwinner: h6: Add GPU OPP table
  arm64: dts: allwinner: h6: Add cooling map for GPU
  arm64: dts: allwinner: a100: Add I2C DMA requests
  arm64: dts: allwinner: a100: Add device node for DMA controller

Link: https://lore.kernel.org/r/YyePKDnOeP8Tdt5n@kista.localdomainSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree change for 6.1:

- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
  Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
  LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
  SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
  parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
  PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
  including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
  various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
  notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
  description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
  for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
  imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
  Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
  support.
- Other small and random board specific updates.

* tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (90 commits)
  arm64: dts: ls1046a-qds: Modify the qspi flash frequency
  arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
  arm64: dts: ls1046a: add gpios based i2c recovery information
  arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size
  arm64: dts: ls1046a: make dma-coherent global to the SoC
  arm64: dts: ls1046a: add missing dma ranges property
  arm64: dts: ls1046a: Add big-endian property for PCIe nodes
  arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes
  arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
  arm64: dts: ls1043a-rdb: add pcf85263 rtc node
  arm64: dts: ls1043a-qds: add mmio based mdio-mux support
  arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
  arm64: dts: ls1043a: add gpio based i2c recovery information
  arm64: dts: ls1043a: make dma-coherent global to the SoC
  arm64: dts: ls1043a: add missing dma ranges property
  arm64: dts: ls1043a: Add big-endian property for PCIe nodes
  arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
  arm64: dts: ls1043a: use pcie aer/pme interrupts
  arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
  arm64: dts: ls1043a: fix the wrong size of dcfg space
  ...

Link: https://lore.kernel.org/r/20220918092806.2152700-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX device tree change for 6.1

- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
  fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
  gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
  to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
  clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
  i.MX6QDL boards.
- Various small and random board specific updates.

* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
  ARM: dts: imx6qdl-gw54xx: add CAN regulator
  ARM: dts: imx6qdl-gw53xx: add CAN regulator
  ARM: dts: imx6qdl-gw52xx: add CAN regulator
  ARM: dts: imx: update sdma node name format
  ARM: dts: imx6: skov: migrate to resistive-adc-touch
  ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
  ARM: dts: imx6sl: use tabs for code indent
  ARM: dts: imx6sx: add missing properties for sram
  ARM: dts: imx6sll: add missing properties for sram
  ARM: dts: imx6sl: add missing properties for sram
  ARM: dts: imx6qp: add missing properties for sram
  ARM: dts: imx6dl: add missing properties for sram
  ARM: dts: imx6q: add missing properties for sram
  ARM: dts: imx7ulp: Add IPG clock for lpi2c
  ARM: dts: imx7ulp: update the LPI2C clock-names
  ARM: dts: vf610: ddr pinmux
  ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
  ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
  ARM: dts: imx6ul-kontron: Simplify devicetree structure
  ARM: dts: vf610: align SPI node name with dtschema
  ...

Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Use rk gpio naming convention into reset-gpios of ov5695 camera
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220620161321.1898840-4-tommaso.merciai@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add right mux for mipi-pdn. Mux this pad as gpio2 14
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220620161321.1898840-3-tommaso.merciai@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add max drive-strength for cif_clkout_m0. This fix the issue that
sometimes camera ov5695 is not probed correctly.
Tested on PX30_Mini_EVB_V11_20190507
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220620161321.1898840-2-tommaso.merciai@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'imx-bindings-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings for 6.1:

- Add compatible for new boards: Kontron BL i.MX8MM OSM-S, MSC
  SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier, i.MX8M Mini Gateworks
  GW7904 board, i.MX8DXL EVK Board.
- Add add interconnect property for i.MX8MP various blk-ctrl devices.
- Add i.MX8MP HDMI HDCP and HRV power domain DT IDs.
- Add bindings for i.MX93 SRC and MEDIAMIX blk-ctrl.
- A minor style fix on i.MX8MM clock binding header.

* tag 'imx-bindings-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: imx: update fsl.yaml for imx8dxl
  dt-bindings: firmware: add missing resource IDs for imx8dxl
  dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board
  dt-bindings: soc: add i.MX93 mediamix blk ctrl
  dt-bindings: soc: add i.MX93 SRC
  dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
  dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
  dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
  dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board
  dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
  dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl
  dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
  dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV
  dt-bindings: arm: fsl: imx6ul-kontron: Update bindings
  dt-bindings: clk: imx8mm: don't use multiple blank lines
  dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk ctrl
  dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk ctrl
  dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk ctrl

Link: https://lore.kernel.org/r/20220918092806.2152700-1-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

this patch adds avdd-0v9-supply and avdd-1v8-supply to hdmi node for
Radxa ROCK 4 series.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220909195006.127957-6-naoki@radxa.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

sort nodes/properties alphabetically
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220909195006.127957-5-naoki@radxa.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

fix regulator name

ref:
 https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4_v13_sch_20181112.pdfSigned-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220909195006.127957-4-naoki@radxa.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

sort nodes/properties alphabetically
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220909195006.127957-3-naoki@radxa.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

fix regulator name.
also, add vcc_3v3 and vdd_log.

ref:
 https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4c_plus_v12_sch_220304.pdfSigned-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220909195006.127957-2-naoki@radxa.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>