- 14 Oct, 2021 9 commits
-
-
Maciej Machnikowski authored
Implement ice_aq_get_gpio and ice_aq_set_gpio for reading and changing the state of GPIO pins described in the topology. Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Maciej Machnikowski authored
Separate link topo parameters in struct ice_aqc_link_topo_addr into new struct ice_aqc_link_topo_params. This keeps input parameters for the get_link_topo command in a separate structure and is required by future commands that operate only on link topo params without the node handle. Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Chen Wandun authored
The implement of function netdev_all_upper_get_next_dev_rcu has been removed in: commit f1170fd4 ("net: Remove all_adj_list and its references") so delete redundant declaration in header file. Fixes: f1170fd4 ("net: Remove all_adj_list and its references") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Link: https://lore.kernel.org/r/20211013094702.3931071-1-chenwandun@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Show per-band ECN-marked counter on qdisc The RED qdisc can expose number of packets that it has marked through the prob_marked counter (shown in iproute2 as "marked"). This counter currently just shows number of packets marked in the SW datapath, which in a switch deployment likely means zero. Spectrum-3 does support per-TC counters, and in this patchset, mlxsw supports this RED statistic properly. ==================== Link: https://lore.kernel.org/r/20211013103748.492531-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
Add a variant of ECN test that uses qdisc marked counter (supported on Spectrum-3 and above) instead of the aggregate ethtool ecn_marked counter. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
The Qdisc code in mlxsw used to report a number of packets ECN-marked on a port. Because reporting a per-port value as a per-TC value was misleading, this was removed in commit 8a29581e ("mlxsw: spectrum: Move the ECN-marked packet counter to ethtool"). On Spectrum-3, a per-TC number of ECN-marked packets is available in per-TC congestion counter group. Add a new array for the ECN counter, fetch the values from the per-TC congestion group, and pick the value indicated by tclass_num as appropriate. On Spectrum-1 and Spectrum-2, this per-TC value is not available, and zeroes will be reported, as they currently are. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
The PPCNT register retrieves per port performance counters. The ecn_marked_tc field in per-TC Congestion counter group contains a count of packets marked as ECN or potentially marked as ECN. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
The name does not make sense as it is. Clearly there is a typo and the suffix should have been _CNT, like the other enumerators. Fix accordingly. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
There is no such thing as "traffic group". The group that this is a heading of is "per traffic class counters". Fix the heading. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 13 Oct, 2021 31 commits
-
-
Dan Carpenter authored
This was supposed to be a check for if dma_alloc_coherent() failed but it has a copy and paste bug so it will not work. Fixes: fb8629e2 ("net: enetc: add support for software TSO") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20211013080456.GC6010@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
To be symmetric with the error unwind path of dsa_switch_setup(), call dsa_switch_unregister_notifier() after ds->ops->teardown. The implication is that ds->ops->teardown cannot emit cross-chip notifiers. For example, currently the dsa_tag_8021q_unregister() call from sja1105_teardown() does not propagate to the entire tree due to this reason. However I cannot find an actual issue caused by this, observed using code inspection. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20211012123735.2545742-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Anders Roxell authored
Building an allmodconfig kernel arm64 kernel, the following build error shows up: In file included from drivers/crypto/marvell/octeontx2/cn10k_cpt.c:4: include/linux/soc/marvell/octeontx2/asm.h:38:15: error: unknown type name 'u64' 38 | static inline u64 otx2_atomic64_fetch_add(u64 incr, u64 *ptr) | ^~~ Include linux/types.h in asm.h so the compiler knows what the type 'u64' are. Fixes: af3826db ("octeontx2-pf: Use hardware register for CQE count") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20211013135743.3826594-1-anders.roxell@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Make the drivers which use single-byte netdev addresses (netdev->addr_len == 1) use the appropriate address setting helpers. arcnet copies from int variables and io reads a lot, so add a helper for arcnet drivers to use. Similar helper could be reused for phonet and appletalk but there isn't any good central location where we could put it, and netdevice.h is already very crowded. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for HSI Link: https://lore.kernel.org/r/20211012142757.4124842-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== net: use dev_addr_set() in hamradio and ip tunnels Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. ==================== Link: https://lore.kernel.org/r/20211012160634.4152690-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Use dev_addr_set() instead of writing to netdev->dev_addr directly in ip tunnels drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Use dev_addr_set() instead of writing to netdev->dev_addr directly in hamradio drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
__dev_addr_set() and dev_addr_mod() and pretty low level, let the arguments be void, there's no chance for confusion in callers converted to use them. Keep u8 in dev_addr_set() because some of the callers are converted from a loop and we want to make sure assignments are not from an array of a different type. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== net: constify dev_addr passing for protocols Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. netdev->dev_addr will be made const to prevent direct writes. This set sprinkles const across variables and arguments in protocol code which are used to hold references to netdev->dev_addr. ==================== Link: https://lore.kernel.org/r/20211012155840.4151590-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
In preparation for netdev->dev_addr being constant make all relevant arguments in decnet constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
In preparation for netdev->dev_addr being constant make all relevant arguments in tipc constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
In preparation for netdev->dev_addr being constant make all relevant arguments in ndisc constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
In preparation for netdev->dev_addr being constant make all relevant arguments in LLC and SNAP constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
In preparation for netdev->dev_addr being constant make all relevant arguments in rose constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
In preparation for netdev->dev_addr being constant make all relevant arguments in AX25 constant. Modify callers as well (netrom, rose). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Biju Das says: ==================== Add functional support for Gigabit Ethernet driver The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are similar to the R-Car Ethernet AVB IP. The Gigabit Ethernet IP consists of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). With a few changes in the driver we can support both IPs. This patch series is aims to add functional support for Gigabit Ethernet driver by filling all the stubs except set_features. set_feature patch will send as separate RFC patch along with rx_checksum patch, as it needs further discussion related to HW checksum. With this series, we can do boot kernel with rootFS mounted on NFS on RZ/G2L platforms. ==================== Link: https://lore.kernel.org/r/20211012163613.30030-1-biju.das.jz@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Fix the typo AVB->DMAC in comment, as the code following the comment is for DMAC on Gigabit Ethernet IP. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
This patch enables Receive/Transmit port of TOE and removes the setting of promiscuous bit from EMAC configuration mode register. This patch also update EMAC configuration mode comment from "PAUSE prohibition" to "EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC Pass Through". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Document PFRI register bit, as it is documented on R-Car Gen3 and RZ/G2L hardware manuals. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Rename the feature bit "nc_queue" with "nc_queues" as AVB DMAC has RX and TX NC queues. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Optimize CXR31 register initialization on ravb_emac_init_gbeth function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Rename the variable "tsrq" with "tccr_mask" as we are passing TCCR mask to the ravb_wait() function. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Add support for retrieving stats information for GbEthernet. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
RZ/G2L E-MAC supports carrier counters. Add a carrier_counter hw feature bit to struct ravb_hw_info to add this feature only for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Fillup ravb_rx_gbeth() function to support RZ/G2L. This patch also renames ravb_rcar_rx to ravb_rx_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Fillup ravb_rx_ring_format_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_format to ravb_rx_ring_format_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Fillup ravb_rx_ring_free_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_free to ravb_rx_ring_free_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Fillup ravb_alloc_rx_desc_gbeth() function to support RZ/G2L. This patch also renames ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
R-Car AVB-DMAC has maximum 2K size on RX buffer, whereas on RZ/G2L it is 8K. We need to allow for changing the MTU within the limit of the maximum size of a descriptor. Add a rx_max_buf_size variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Biju Das authored
Use ALIGN macro for calculating the value for max_rx_len. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jean Sacren authored
The type of enum dbg_grc_params has the enumerator list starting from 0. When grc_param is declared by enum dbg_grc_params, (grc_param < 0) is always false. We should remove the check of this expression. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Acked-by: Shai Malin <smalin@marvell.com> Link: https://lore.kernel.org/r/20211012074645.12864-1-sakiwit@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-