- 30 Oct, 2017 38 commits
-
-
Kai-Heng Feng authored
Like other Plantronics devices, C310 and C520-M do not support sample rate reading. Add them to the sample rate quirk accordingly. BugLink: https://bugs.launchpad.net/bugs/1708499 BugLink: https://bugs.launchpad.net/bugs/1709282Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> (cherry picked from commit 0dcd020b) Signed-off-by:
Marcelo Cerri <marcelo.cerri@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
Markus Pargmann authored
BugLink: http://bugs.launchpad.net/bugs/696435 The userspace needs to know when nbd devices are ready for use. Currently no events are created for the userspace which doesn't work for systemd. See the discussion here: https://github.com/systemd/systemd/pull/358 This patch uses a central point to setup the nbd-internal sizes. A ioctl to set a size does not lead to a visible size change. The size of the block device will be kept at 0 until nbd is connected. As soon as it connects, the size will be changed to the real value and a uevent is created. When disconnecting, the blockdevice is set to 0 size and another uevent is generated. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> (cherry picked from commit 37091fdd) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Commit "UBUNTU: d/s/m/insert-ubuntu-changes: use full version numbers" wrongly change the behaviour of the "<stop at>" parameter. Change the script to not include the <stop at> version into the target changelog. Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1718388 io.dev is used as an index into the _devices array and currently the user may pass any unsigned int value into io.dev which can create an out-of-bounds error. Fix this by sanity checking io.dev and returning -EINVAL for out-of-bounds values of io.dev Detected by CoverityScan CID#1456895 ("Untrusted array index read") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1718388 dev->name is a char array and hence can never be null and so the null checks on dev->name are redundant. Remove them. Detected by CoverityScan CID#1456897, CID#145690 ("Array compared against 0") Signed-off-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1718388 sinfo can potentially be null, so add a null check to avoid a null pointer deference on sinfo->info_id. Detected by CoverityScan CID#1456902 ("Dereference before null check") Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1722719 This reverts commit fcaa4a07. As noted by Masaki [1], 0x120A + trackpoint will not be used in mass production machines, so remove the ID accordingly. [1] http://www.spinics.net/lists/linux-input/msg53222.htmlSigned-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> (cherry picked from commit 66dcdafe) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-By:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1724836Signed-off-by:
-
Mathias Krause authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 6b32c126 upstream. The alt_max_short() macro in asm/alternative.h does not work as intended, leading to nasty bugs. E.g. alt_max_short("1", "3") evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not exactly the maximum of 1 and 3. In fact, I had to learn it the hard way by crashing my kernel in not so funny ways by attempting to make use of the ALTENATIVE_2 macro with alternatives where the first one was larger than the second one. According to [1] and commit dbe4058a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") the right handed side should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the macro work as intended. While at it, fix up the comments regarding the additional "-", too. It's not about gas' usage of s32 but brain dead logic of having a "true" value of -1 for the < operator ... *sigh* Btw., the one in asm/alternative-asm.h is correct. And, apparently, all current users of ALTERNATIVE_2() pass same sized alternatives, avoiding to hit the bug. [1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMaxReviewed-and-tested-by:
Borislav Petkov <bp@suse.de> Fixes: dbe4058a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/1507228213-13095-1-git-send-email-minipli@googlemail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 299d7572 upstream. Make sure to reset the USB-console port pointer when console setup fails in order to avoid having the struct usb_serial be prematurely freed by the console code when the device is later disconnected. Fixes: 73e487fd ("[PATCH] USB console: fix disconnection issues") Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Shrirang Bagul authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit f5d9644c upstream. Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74 series which will by default boot with vid 0x413c and pid's 0x81cf, 0x81d0, 0x81d1, 0x81d2. Signed-off-by:
-
Stefan Bader authored
This reverts commit 66a7f616 in favour of the upstream stable commit. BugLink: https://bugs.launchpad.net/bugs/1724836Signed-off-by:
-
Henryk Heisig authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 837ddc47 upstream. This commit adds support for TP-Link LTE mPCIe module is used in in TP-Link MR200v1, MR6400v1 and v2 routers. Signed-off-by:
Henryk Heisig <hyniu@o2.pl> Signed-off-by:
-
Andreas Engel authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit c496ad83 upstream. Add the USB device id for the ELV TFD500 data logger. Signed-off-by:
Andreas Engel <anen-nospam@gmx.net> Signed-off-by:
-
Jeffrey Chu authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit a6c215e2 upstream. Add CYPRESS_VID vid and CYPRESS_WICED_BT_USB and CYPRESS_WICED_WL_USB device IDs to ftdi_sio driver. Signed-off-by:
Jeffrey Chu <jeffrey.chu@cypress.com> Signed-off-by:
-
Vitaly Mayatskikh authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 95d78c28 upstream. bio_map_user_iov and bio_unmap_user do unbalanced pages refcounting if IO vector has small consecutive buffers belonging to the same page. bio_add_pc_page merges them into one, but the page reference is never dropped. Signed-off-by:
Vitaly Mayatskikh <v.mayatskih@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andreas Gruenbacher authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 899f0429 upstream. In the code added to function submit_page_section by commit b1058b98, sdio->bio can currently be NULL when calling dio_bio_submit. This then leads to a NULL pointer access in dio_bio_submit, so check for a NULL bio in submit_page_section before trying to submit it instead. Fixes xfstest generic/250 on gfs2. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Andrew Gabbasov authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit aec17e1e upstream. KASAN enabled configuration reports an error BUG: KASAN: use-after-free in usb_composite_overwrite_options+... [libcomposite] at addr ... Read of size 1 by task ... when some driver is un-bound and then bound again. For example, this happens with FunctionFS driver when "ffs-test" test application is run several times in a row. If the driver has empty manufacturer ID string in initial static data, it is then replaced with generated string. After driver unbinding the generated string is freed, but the driver data still keep that pointer. And if the driver is then bound again, that pointer is re-used for string emptiness check. The fix is to clean up the driver string data upon its unbinding to drop the pointer to freed memory. Fixes: cc2683c3 ("usb: gadget: Provide a default implementation of default manufacturer string") Signed-off-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit c95072b3 upstream. While line6_probe() may kick off URB for a control MIDI endpoint, the function doesn't clean up it properly at its error path. This results in a leftover URB action that is eventually triggered later and causes an Oops like: general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 0 Comm: swapper/1 Not tainted RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619 RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76 Call Trace: <IRQ> line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845 dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281 .... Since the whole clean-up procedure is done in line6_disconnect() callback, we can simply call it in the error path instead of open-coding the whole again. It'll fix such an issue automagically. The bug was spotted by syzkaller. Fixes: eedd0e95 ("ALSA: line6: Don't forget to call driver's destructor at error path") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 99fee508 upstream. caiaq driver doesn't kill the URB properly at its error path during the probe, which may lead to a use-after-free error later. This patch addresses it. Reported-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 5803b023 upstream. The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock. The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case. Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open(). Reported-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 71105998 upstream. There is a potential race window opened at creating and deleting a port via ioctl, as spotted by fuzzing. snd_seq_create_port() creates a port object and returns its pointer, but it doesn't take the refcount, thus it can be deleted immediately by another thread. Meanwhile, snd_seq_ioctl_create_port() still calls the function snd_seq_system_client_ev_port_start() with the created port object that is being deleted, and this triggers use-after-free like: BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511 ___slab_alloc+0x425/0x460 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x150/0x190 snd_seq_create_port+0x94/0x9b0 [snd_seq] snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] snd_seq_ioctl+0x40/0x80 [snd_seq] do_vfs_ioctl+0x54b/0xda0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x16/0x75 INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717 __slab_free+0x204/0x310 kfree+0x15f/0x180 port_delete+0x136/0x1a0 [snd_seq] snd_seq_delete_port+0x235/0x350 [snd_seq] snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] snd_seq_ioctl+0x40/0x80 [snd_seq] do_vfs_ioctl+0x54b/0xda0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x16/0x75 Call Trace: [<ffffffff81b03781>] dump_stack+0x63/0x82 [<ffffffff81531b3b>] print_trailer+0xfb/0x160 [<ffffffff81536db4>] object_err+0x34/0x40 [<ffffffff815392d3>] kasan_report.part.2+0x223/0x520 [<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] [<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30 [<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] [<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq] [<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0 [<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] [<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq] [<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80 [<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0 ..... We may fix this in a few different ways, and in this patch, it's fixed simply by taking the refcount properly at snd_seq_create_port() and letting the caller unref the object after use. Also, there is another potential use-after-free by sprintf() call in snd_seq_create_port(), and this is moved inside the lock. This fix covers CVE-2017-15265. Reported-and-tested-by:
Michael23 Yu <ycqzsy@gmail.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 124751d5 upstream. USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like: ================================================================== BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430 snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 .... Allocated by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540 create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618 .... Freed by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244 snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250 __snd_device_free+0x1ff/0x380 sound/core/device.c:91 snd_device_free_all+0x8f/0xe0 sound/core/device.c:244 snd_card_do_free sound/core/init.c:461 release_card_device+0x47/0x170 sound/core/init.c:181 device_release+0x13f/0x210 drivers/base/core.c:814 .... Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too. In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice. Reported-by:
-
Joerg Roedel authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit ce76353f upstream. The function only sends the flush command to the IOMMU(s), but does not wait for its completion when it returns. Fix that. Fixes: 601367d7 ('x86/amd-iommu: Remove iommu_flush_domain function') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Kazuya Mizuguchi authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 29c7f3e6 upstream. The DREQE bit of the DnFIFOSEL should be set to 1 after the DE bit of USB-DMAC on R-Car SoCs is set to 1 after the USB-DMAC received a zero-length packet. Otherwise, a transfer completion interruption of USB-DMAC doesn't happen. Even if the driver changes the sequence, normal operations (transmit/receive without zero-length packet) will not cause any side-effects. So, this patch fixes the sequence anyway. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [shimoda: revise the commit log] Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Haozhong Zhang authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 8eb3f87d upstream. When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the guest CR4. Before this CR4 loading, the guest CR4 refers to L2 CR4. Because these two CR4's are in different levels of guest, we should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which is used to handle guest writes to its CR4, checks the guest change to CR4 and may fail if the change is invalid. The failure may cause trouble. Consider we start a L1 guest with non-zero L1 PCID in use, (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0) and a L2 guest with L2 PCID disabled, (i.e. L2 CR4.PCIDE == 0) and following events may happen: 1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4 into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e. vcpu->arch.cr4) is left to the value of L2 CR4. 2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit, kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID, because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1 CR3.PCID != 0, L0 KVM will inject GP to L1 guest. Fixes: 4704d0be ("KVM: nVMX: Exiting from L2 to L1") Cc: qemu-stable@nongnu.org Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Herbert Xu authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit b61907bb upstream. The shash ahash digest adaptor function may crash if given a zero-length input together with a null SG list. This is because it tries to read the SG list before looking at the length. This patch fixes it by checking the length first. Reported-by: Stephan Müller<smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Stephan Müller <smueller@chronox.de> Signed-off-by:
-
Jaejoong Kim authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit f043bfc9 upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c243 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by:
Jaejoong Kim <climbbb.kim@gmail.com> Tested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Peter Ujfalusi authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 87a2f622 upstream. Memory to Memory transfers does not have any special alignment needs regarding to acnt array size, but if one of the areas are in memory mapped regions (like PCIe memory), we need to make sure that the acnt array size is aligned with the mem copy parameters. Before "dmaengine: edma: Optimize memcpy operation" change the memcpy was set up in a different way: acnt == number of bytes in a word based on __ffs((src | dest | len), bcnt and ccnt for looping the necessary number of words to comlete the trasnfer. Instead of reverting the commit we can fix it to make sure that the ACNT size is aligned to the traswnfer. Fixes: df6694f8 (dmaengine: edma: Optimize memcpy operation) Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Paul Burton authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit ca8eb05b upstream. The FPU emulator includes 2 calls to pr_err() which are triggered by invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions. These cases are not kernel errors, merely invalid instructions which are already handled by delivering a SIGILL which will provide notification that something failed in cases where that makes sense. In cases where that SIGILL is somewhat expected & being handled, for example when crashme happens to generate one of the affected bad encodings, the message is printed with no useful context about what triggered it & spams the kernel log for no good reason. Remove the pr_err() calls to make crashme run silently & treat the bad encodings the same way we do others, with a SIGILL & no further kernel log output. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: f8c3c671 ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17253/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Alan Stern authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit ab219221 upstream. The dummy-hcd driver calls the gadget driver's disconnect callback under the wrong conditions. It should invoke the callback when Vbus power is turned off, but instead it does so when the D+ pullup is turned off. This can cause a deadlock in the composite core when a gadget driver is unregistered: [ 88.361471] ============================================ [ 88.362014] WARNING: possible recursive locking detected [ 88.362580] 4.14.0-rc2+ #9 Not tainted [ 88.363010] -------------------------------------------- [ 88.363561] v4l_id/526 is trying to acquire lock: [ 88.364062] (&(&cdev->lock)->rlock){....}, at: [<ffffffffa0547e03>] composite_disconnect+0x43/0x100 [libcomposite] [ 88.365051] [ 88.365051] but task is already holding lock: [ 88.365826] (&(&cdev->lock)->rlock){....}, at: [<ffffffffa0547b09>] usb_function_deactivate+0x29/0x80 [libcomposite] [ 88.366858] [ 88.366858] other info that might help us debug this: [ 88.368301] Possible unsafe locking scenario: [ 88.368301] [ 88.369304] CPU0 [ 88.369701] ---- [ 88.370101] lock(&(&cdev->lock)->rlock); [ 88.370623] lock(&(&cdev->lock)->rlock); [ 88.371145] [ 88.371145] *** DEADLOCK *** [ 88.371145] [ 88.372211] May be due to missing lock nesting notation [ 88.372211] [ 88.373191] 2 locks held by v4l_id/526: [ 88.373715] #0: (&(&cdev->lock)->rlock){....}, at: [<ffffffffa0547b09>] usb_function_deactivate+0x29/0x80 [libcomposite] [ 88.374814] #1: (&(&dum_hcd->dum->lock)->rlock){....}, at: [<ffffffffa05bd48d>] dummy_pullup+0x7d/0xf0 [dummy_hcd] [ 88.376289] [ 88.376289] stack backtrace: [ 88.377726] CPU: 0 PID: 526 Comm: v4l_id Not tainted 4.14.0-rc2+ #9 [ 88.378557] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 88.379504] Call Trace: [ 88.380019] dump_stack+0x86/0xc7 [ 88.380605] __lock_acquire+0x841/0x1120 [ 88.381252] lock_acquire+0xd5/0x1c0 [ 88.381865] ? composite_disconnect+0x43/0x100 [libcomposite] [ 88.382668] _raw_spin_lock_irqsave+0x40/0x54 [ 88.383357] ? composite_disconnect+0x43/0x100 [libcomposite] [ 88.384290] composite_disconnect+0x43/0x100 [libcomposite] [ 88.385490] set_link_state+0x2d4/0x3c0 [dummy_hcd] [ 88.386436] dummy_pullup+0xa7/0xf0 [dummy_hcd] [ 88.387195] usb_gadget_disconnect+0xd8/0x160 [udc_core] [ 88.387990] usb_gadget_deactivate+0xd3/0x160 [udc_core] [ 88.388793] usb_function_deactivate+0x64/0x80 [libcomposite] [ 88.389628] uvc_function_disconnect+0x1e/0x40 [usb_f_uvc] This patch changes the code to test the port-power status bit rather than the port-connect status bit when deciding whether to isue the callback. Signed-off-by:
David Tulloh <david@tulloh.id.au> Signed-off-by:
-
Paul E. McKenney authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 28585a83 upstream. A number of architecture invoke rcu_irq_enter() on exception entry in order to allow RCU read-side critical sections in the exception handler when the exception is from an idle or nohz_full CPU. This works, at least unless the exception happens in an NMI handler. In that case, rcu_nmi_enter() would already have exited the extended quiescent state, which would mean that rcu_irq_enter() would (incorrectly) cause RCU to think that it is again in an extended quiescent state. This will in turn result in lockdep splats in response to later RCU read-side critical sections. This commit therefore causes rcu_irq_enter() and rcu_irq_exit() to take no action if there is an rcu_nmi_enter() in effect, thus avoiding the unscheduled return to RCU quiescent state. This in turn should make the kernel safe for on-demand RCU voyeurism. Link: http://lkml.kernel.org/r/20170922211022.GA18084@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 0be964be ("module: Sanitize RCU usage and locking") Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Luca Coelho authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 97bce57b upstream. The MCAST_FILTER_CMD can get quite large when we have many mcast addresses to set (we support up to 255). So the command should be send as NOCOPY to prevent a warning caused by too-long commands: WARNING: CPU: 0 PID: 9700 at /root/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/pcie/tx.c:1550 iwl_pcie_enqueue_hcmd+0x8c7/0xb40 [iwlwifi] Command MCAST_FILTER_CMD (0x1d0) is too large (328 bytes) This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196743Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Peng Xu authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit ad670233 upstream. Define a policy for packet pattern attributes in order to fix a potential read over the end of the buffer during nla_get_u32() of the NL80211_PKTPAT_OFFSET attribute. Note that the data there can always be read due to SKB allocation (with alignment and struct skb_shared_info at the end), but the data might be uninitialized. This could be used to leak some data from uninitialized vmalloc() memory, but most drivers don't allow an offset (so you'd just get -EINVAL if the data is non-zero) or just allow it with a fixed value - 100 or 128 bytes, so anything above that would get -EINVAL. With brcmfmac the limit is 1500 so (at least) one byte could be obtained. Cc: stable@kernel.org Signed-off-by:
Peng Xu <pxu@qti.qualcomm.com> Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> [rewrite description based on SKB allocation knowledge] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Pavel Shilovsky authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 511c54a2 upstream. According to the MS-SMB2 spec (3.2.5.1.6) once the client receives STATUS_NETWORK_SESSION_EXPIRED error code from a server it should reconnect the current SMB session. Currently the client doesn't do that. This can result in subsequent client requests failing by the server. The patch adds an additional logic to the demultiplex thread to identify expired sessions and reconnect them. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Darrick J. Wong authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 1bd8d6cd upstream. In the ext4 implementations of SEEK_HOLE and SEEK_DATA, make sure we return -ENXIO for negative offsets instead of banging around inside the extent code and returning -EFSCORRUPTED. Reported-by:
Mateusz S <muttdini@gmail.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Arend Van Spriel authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 17df6453 upstream. Upon handling the firmware notification for scans the length was checked properly and may result in corrupting kernel heap memory due to buffer overruns. This fix addresses CVE-2017-0786. Cc: Kevin Cernekee <cernekee@chromium.org> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Peter Hurley authored
BugLink: http://bugs.launchpad.net/bugs/1721065 tty file_operations (read/write/ioctl) wait for the ldisc reference indefinitely (until ldisc lifetime events, such as hangup or TIOCSETD, finish). Since hangup now destroys the ldisc and does not instance another copy, file_operations must now be prepared to receive a NULL ldisc reference from tty_ldisc_ref_wait(): CPU 0 CPU 1 ----- ----- (*f_op->read)() => tty_read() __tty_hangup() ... f_op = &hung_up_tty_fops; ... tty_ldisc_hangup() tty_ldisc_lock() tty_ldisc_kill() tty->ldisc = NULL tty_ldisc_unlock() ld = tty_ldisc_ref_wait() /* ld == NULL */ Instead, the action taken now is to return the same value as if the tty had been hungup a moment earlier: CPU 0 CPU 1 ----- ----- __tty_hangup() ... f_op = &hung_up_tty_fops; (*f_op->read)() => hung_up_tty_read() return 0; ... tty_ldisc_hangup() tty_ldisc_lock() tty_ldisc_kill() tty->ldisc = NULL tty_ldisc_unlock() Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
- 19 Oct, 2017 2 commits
-
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1724783Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1724783 commit 173b8439 upstream. While we allow deletes without the key, the following should not be permitted: # cd /vdc/encrypted-dir-without-key # ls -l total 4 -rw-r--r-- 1 root root 0 Dec 27 22:35 6,LKNRJsp209FbXoSvJWzB -rw-r--r-- 1 root root 286 Dec 27 22:35 uRJ5vJh9gE7vcomYMqTAyD # mv uRJ5vJh9gE7vcomYMqTAyD 6,LKNRJsp209FbXoSvJWzB Signed-off-by:
-
