- 23 Sep, 2020 30 commits
-
-
Filipe Manana authored
commit 1c78544e upstream. When faulting in the pages for the user supplied buffer for the search ioctl, we are passing only the base address of the buffer to the function fault_in_pages_writeable(). This means that after the first iteration of the while loop that searches for leaves, when we have a non-zero offset, stored in 'sk_offset', we try to fault in a wrong page range. So fix this by adding the offset in 'sk_offset' to the base address of the user supplied buffer when calling fault_in_pages_writeable(). Several users have reported that the applications compsize and bees have started to operate incorrectly since commit a48b73ec ("btrfs: fix potential deadlock in the search ioctl") was added to stable trees, and these applications make heavy use of the search ioctls. This fixes their issues. Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/ Link: https://github.com/kilobyte/compsize/issues/34 Fixes: a48b73ec ("btrfs: fix potential deadlock in the search ioctl") CC: stable@vger.kernel.org # 4.4+ Tested-by:
A L <mail@lechevalier.se> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rustam Kovhaev authored
commit fea22e15 upstream. let's use usb_find_common_endpoints() to discover endpoints, it does all necessary checks for type and xfer direction remove memset() in hfa384x_create(), because we now assign endpoints in prism2sta_probe_usb() and because create_wlan() uses kzalloc() to allocate hfa384x struct before calling hfa384x_create() Fixes: faaff976 ("staging: wlan-ng: properly check endpoint types") Reported-and-tested-by: syzbot+22794221ab96b0bab53a@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=22794221ab96b0bab53aSigned-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200804145614.104320-1-rkovhaev@gmail.comSigned-off-by:
-
Johan Hovold authored
commit 66a35939 upstream. Many USB drivers iterate over the available endpoints to find required endpoints of a specific type and direction. Typically the endpoints are required for proper function and a missing endpoint should abort probe. To facilitate code reuse, add a helper to retrieve common endpoints (bulk or interrupt, in or out) and four wrappers to find a single endpoint. Note that the helpers are marked as __must_check to serve as a reminder to always verify that all expected endpoints are indeed present. This also means that any optional endpoints, typically need to be looked up through separate calls. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit 89226a29 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The additional forcing of the 8 byte alignment of the timestamp is not strictly necessary but makes the code less fragile by making this explicit. Fixes: c7eeea93 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver") Reported-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit 7e5ac1f2 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The force alignment of ts is not strictly necessary in this particularly case but does make the code less fragile. Fixes: a84ef0d1 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver") Reported-by:
-
Jonathan Cameron authored
commit 95ad6757 upstream. iio_push_to_buffers_with_timestamp assumes 8 byte alignment which is not guaranteed by an array of smaller elements. Note that whilst in this particular case the alignment forcing of the ts element is not strictly necessary it acts as good documentation. Doing this where not necessary should cut down on the number of cut and paste introduced errors elsewhere. Fixes: 0427a106 ("iio: accel: kxsd9: Add triggered buffer handling") Reported-by:
-
Jonathan Cameron authored
commit 52362885 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak appart from previous readings. It is necessary to force the alignment of ts to avoid the padding on x86_32 being different from 64 bit platorms (it alows for 4 bytes aligned 8 byte types. Fixes: 06ad7ea1 ("max44000: Initial triggered buffer support") Reported-by:
-
Jonathan Cameron authored
commit 02ad21ce upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment of ts is not necessary in this case as by coincidence the padding will end up the same, however I consider it to make the code less fragile and have included it. Fixes: bc11ca4a ("iio:magnetometer:ak8975: triggered buffer support") Reported-by:
-
Sandhya Bankar authored
commit 69c72ec9 upstream. Fix the following sparse endianness warnings: drivers/iio/magnetometer/ak8975.c:716:16: warning: cast to restricted __le16 drivers/iio/magnetometer/ak8975.c:837:19: warning: cast to restricted __le16 drivers/iio/magnetometer/ak8975.c:838:19: warning: cast to restricted __le16 drivers/iio/magnetometer/ak8975.c:839:19: warning: cast to restricted __le16 Signed-off-by:
Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit 54f82df2 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak apart from previous readings. The eplicit alignment of ts is necessary to ensure correct padding on x86_32 where s64 is only aligned to 4 bytes. Fixes: 08e05d1f ("ti-adc081c: Initial triggered buffer support") Reported-by:
-
Jonathan Cameron authored
commit f8cd222f upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 32 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment isn't technically needed here, but it reduced fragility and avoids cut and paste into drivers where it will be needed. If we want this in older stables will need manual backport due to driver reworks. Fixes: c43a102e ("iio: ina2xx: add support for TI INA2xx Power Monitors") Reported-by:
-
Jonathan Cameron authored
commit a6f86f72 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes tag is beyond some major refactoring so likely manual backporting would be needed to get that far back. Whilst the force alignment of the ts is not strictly necessary, it does make the code less fragile. Fixes: 3bbec977 ("iio: bmc150_accel: add support for hardware fifo") Reported-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:
-
Jonathan Cameron authored
commit 2684d500 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here we use a structure on the stack. The driver already did an explicit memset so no data leak was possible. Forced alignment of ts is not strictly necessary but probably makes the code slightly less fragile. Note there has been some rework in this driver of the years, so no way this will apply cleanly all the way back. Fixes: 2690be90 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver") Reported-by:
-
Maxim Kochetkov authored
commit e71e6dbe upstream. To stop conversion ads1015_set_power_state() function call unimplemented function __pm_runtime_suspend() from pm_runtime_put_autosuspend() if CONFIG_PM is not set. In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS, so ads1015_read_raw() failed because ads1015_set_power_state() returns an error. If CONFIG_PM is disabled, there is no need to start/stop conversion. Fix it by adding return 0 function variant if CONFIG_PM is not set. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Fixes: ecc24e72 ("iio: adc: Add TI ADS1015 ADC driver support") Tested-by:
Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Angelo Compagnucci authored
[ Upstream commit a139ffa4 ] Reading from the chip should be unlocked on error path else the lock could never being released. Fixes: 07914c84 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Fixes: 3f1093d8 ("iio: adc: mcp3422: fix locking scope") Acked-by:
Angelo Compagnucci <angelo.compagnucci@gmail.com> Link: https://lore.kernel.org/r/20200901093218.1500845-1-angelo.compagnucci@gmail.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Angelo Compagnucci authored
commit 3f1093d8 upstream. Locking should be held for the entire reading sequence involving setting the channel, waiting for the channel switch and reading from the channel. If not, reading from a channel can result mixing with the reading from another channel. Fixes: 07914c84 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit cfc905f1 ] GCOV built with GCC 10 doesn't initialize n_function variable. This produces different kernel panics as was seen by Colin in Ubuntu and me in FC 32. As a workaround, let's disable GCOV build for broken GCC 10 version. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288 Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/ Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rander Wang authored
[ Upstream commit 13774d81 ] In snd_hdac_device_init pm_runtime_set_active is called to increase child_count in parent device. But when it is failed to build connection with GPU for one case that integrated graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be invoked to clean up a HD-audio extended codec base device. At this time the child_count of parent is not decreased, which makes parent device can't get suspended. This patch calls pm_runtime_set_suspended to decrease child_count in parent device in snd_hdac_device_exit to match with snd_hdac_device_init. pm_runtime_set_suspended can make sure that it will not decrease child_count if the device is already suspended. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Xie He authored
[ Upstream commit 1a545ebe ] This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function. This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header). Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 89d29997 ] eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors. The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header. - copy AUX_IENABLE from arch/arc header - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/** Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.deSigned-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 125eac24 ] Don't leak kernel memory contents into the shortform attr fork. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Xie He authored
[ Upstream commit 91244d10 ] Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
-
Mohan Kumar authored
[ Upstream commit 216116ea ] The Tegra HDA codec HW implementation has an issue related to not swapping the 2 channel Audio Sample Packet(ASP) channel mapping. Whatever the FL and FR mapping specified the left channel always comes out of left speaker and right channel on right speaker. So add condition to disallow the swapping of FL,FR during the playback. Signed-off-by:
Mohan Kumar <mkumard@nvidia.com> Acked-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.comSigned-off-by:
-
Dinghao Liu authored
[ Upstream commit 15ac5cda ] When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit f97c04c3 ] When down_killable() fails, skb_resp should be freed just like when st95hf_spi_send() fails. Signed-off-by:
-
Xie He authored
[ Upstream commit 1ee39c14 ] The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
-
Luo Jiaxing authored
[ Upstream commit 53de092f ] It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.comReviewed-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Kamal Heib authored
[ Upstream commit 6112ef62 ] Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no need to check if they aren't set. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit e3ddd606 ] When page_address() fails, umem should be freed just like when rxe_mem_alloc() fails. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200819075632.22285-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Dinh Nguyen authored
[ Upstream commit 0ff5a481 ] Fixes the register address for the timer3 entry on Arria10. Fixes: 475dc86d ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
- 12 Sep, 2020 10 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 96e97bc0 ] napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by:
Rob Sherwood <rsher@fb.com> Fixes: 2d8bff12 ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Xin Long authored
[ Upstream commit 3106ecb4 ] With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Kamil Lorenc authored
[ Upstream commit a609d025 ] Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface. Signed-off-by:
Kamil Lorenc <kamil@re-ws.pl> Signed-off-by:
-
Paul Moore authored
[ Upstream commit d3b990b7 ] This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise. The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite. The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat). Fixes: 63c41688 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by:
Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Jakub Kicinski authored
commit 96ecdcc9 upstream. Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Shung-Hsi Yu authored
commit cbedcb04 upstream. On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a max_order of 31 will be passed to mlx_buddy_init(), which results in s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to kvmalloc_array() failure when it is converted to size_t. mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting mlx4_core: probe of 0000:b1:00.0 failed with error -12 Fix this issue by changing the left shifting operand from a signed literal to an unsigned one. Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by:
-
Max Staudt authored
[ Upstream commit d3a84a8d ] The basic permission bits (protection bits in AmigaOS) have been broken in Linux' AFFS - it would only set bits, but never delete them. Also, contrary to the documentation, the Archived bit was not handled. Let's fix this for good, and set the bits such that Linux and classic AmigaOS can coexist in the most peaceful manner. Also, update the documentation to represent the current state of things. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Max Staudt <max@enpas.org> Signed-off-by:
-
Fabian Frederick authored
[ Upstream commit 1bafd6f1 ] According to commit f90774e1 ("checkpatch: look for symbolic permissions and suggest octal instead") Link: http://lkml.kernel.org/r/20170109191208.6085-5-fabf@skynet.beSigned-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Sakamoto authored
Tascam FE-8 is known to support communication by asynchronous transaction only. The support can be implemented in userspace application and snd-firewire-ctl-services project has the support. However, ALSA firewire-tascam driver is bound to the model. This commit changes device entries so that the model is excluded. In a commit 53b3ffee ("ALSA: firewire-tascam: change device probing processing"), I addressed to the concern that version field in configuration differs depending on installed firmware. However, as long as I checked, the version number is fixed. It's safe to return version number back to modalias. Fixes: 53b3ffee ("ALSA: firewire-tascam: change device probing processing") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jpSigned-off-by:
-
