From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remaining board files are only kept because nobody has stepped up to
remove them.

Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the
plan to remove them in early 2023 after the next longterm supported
kernel is out.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Most of the remaining arm board files in the kernel are unused and will be
removed in early 2023 if no users step up.  So far I got no user replies
about the orion5x and mv78xx0 machines, but these are still supported
in the default kernel of the Debian 'armel' (armv5 softfloat) distro,
and there is an active project on github that tries to keep some of
these machines working, and Mauri Sandberg is working on a DT conversion
for the D-Link DNS-323.

It appears the Debian-on-Buffalo project has not got the Terastation WXL
working in a few years, and the other mv78xx0 machines are just the
reference designs, so I assume none of these have remaining users.

For the Orion5x family, the same is probably true for its reference
implementations (RD88Fxxxxx, DB88F281) and the machines with less than
64MB of memory (WNR854T, WRT350N v2).

The remaining nine machines are now scheduled to be kept for at least
2023, hopefully to be replaced with DT based versions.

The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES
to still build, while the other affected defconfig files lose the
specific boards.

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/1000001101000/Debian_on_BuffaloSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Most of the traditional board files are no longer used by anyone and
will be removed next year, while the DT based machine support remains.

Adding a CONFIG_ATAGS dependency around all the board files means
that they now actaully get disabled when ATAGS support is left out,
and the individual boards that have no known users are marked
as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove
them in early 2023 unless someone else shows interest.

Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi
family of Sharp Zaurus SL machines to DT, to make that easier those
remain for the moment.

In addition, the "Gumstix" machine is the one that is supported in
qemu with 256MB of RAM, which makes it particularly nice for testing,
I'm leaving it in hoping that someone can take care of converting it to
DT as well.

Finally, Marc Zyngier is still able to test the Zeus and Viper machines,
so these could be saved as well if anyone wants to conver them to DT.
This seems less likely, so I'm marking them as unused for the time being.

For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig
now only enable the boards that are not marked as unused, while all the
other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow
building the kernels.

Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Laurence de Bruxelles <lfdebrux@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Based on the recent mailing list discussion, most board file support
has no remaining users and can be scheduled for removal early next
year.

If a board is still found to have users, it will remain for this round
but users are encouraged to migrate to devicetree based booting where
possible.

The timing is meant to ensure the next longterm supported kernel
still contains all the board files, giving another year of support
for potential users that did not speak up and would otherwise be
stuck on the v5.15.y longterm kernel from 2021.

Link: https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
Link: https://docs.google.com/spreadsheets/d/1PL4dUUSieeXHzZhAn_Rnix32OTiCfN33sCQejpvI6ng/edit#gid=0Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are a total of eight platforms that only suppor ATAGS based boot
with board files but no devicetree booting.

For dove, the DT support is part of the mvebu platform, which shares
driver but no code in arch/arm.

Most of these will never get converted to DT, and the majority of the
board files appear to be entirely unused already. There are still known
users on a few machines, and there may be interest in converting some
omap1, ep93xx or footbridge machines over in the future.

For the moment, just add a Kconfig dependency to hide these platforms
completely when CONFIG_ATAGS is disabled, and reorder the priority
of the options: Rather than offering to turn ATAGS off for platforms
that have DT support, make it a top-level setting that determines
which platforms are visible.

The s3c24xx platform supports one machine with DT support, but it
cannot be built without also including ATAGS support, and the
entire platform is scheduled for removal, so leaving the entire
platform behind a dependency seems good enough.

All defconfig files should keep working, as the option remains default
enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

CONFIG_LEDS was replaced by CONFIG_NEW_LEDS over ten years ago with commit
fa8bbb13 ("ARM: use new LEDS CPU trigger stub to replace old one"),
but some defconfig files still reference it.

Replace it and its sub-options with the corresponding new versions.

Some of these machines may not actually have a new-style LED driver,
and I did not check them individually as most of the machines are
going away soon anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Since commit 1515b186 ("ARM: make configuration of userspace
Thumb support an expert option"), CONFIG_THUMB cannot be disabled
unless one turns on CONFIG_EXPERT first.

This is probably for the better, so remove the statements that
turn it off.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.

This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.

Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.

Fixes: f9b3cd24 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The default is always 0x0 after commit 39c3e304 ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.

I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM64 defconfig more updates for v5.20

This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.

* tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Demote Qualcomm USB PHYs to modules
  arm64: defconfig: Enable Qualcomm SC8280XP providers

Link: https://lore.kernel.org/r/20220720230140.2113129-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The Qualcomm USB PHYs are not critical for reaching the ramdisk to load
modules, so they can be demoted to be built as such instead of builtin.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220712031821.4134712-1-bjorn.andersson@linaro.org

The Qualcomm SC8280XP need the global clock controller, interconnect
provider and TLMM pinctrl in order to boot. Enable these as builtin, as
they are needed in order to provide e.g. UART.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707161014.3178798-1-bjorn.andersson@linaro.org

Merge tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM64 defconfig updates for v5.20

This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.

It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.

* tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: enable Qualcomm Bandwidth Monitor
  arm64: defconfig: Enable qcom interconnect drivers
  arm64: defconfig: Enable qcom ss & hs usb phy
  arm64: defconfig: enable Qualcomm LPG leds driver

Link: https://lore.kernel.org/r/20220712031812.1275182-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig

This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.10, please pull the following:

- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
  to load the proper GPU module driver

- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
  counterpart to support the newly added BCA SocS

* tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux:
  arm64: defconfig: Enable DRM_V3D
  arm64: defconfig: enable bcmbca soc support

Link: https://lore.kernel.org/r/20220711164451.3542127-3-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains ARM SoCs defconfig changes for 5.20, please
pull the following:

- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
  to load the proper GPU module driver

- William updates the multi_v7_defconfig to replace the enabling of
  CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
  is now supported

* tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: Update configs for BCM63138
  ARM: configs: Enable DRM_V3D

Link: https://lore.kernel.org/r/20220711164451.3542127-2-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-defconfig-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

i.MX defconfig update for 5.20:

- Enable i.MX93 clock and pinctrl driver in arm64 defconfig.
- Enable gpio-fan driver in arm64 defconfig, as it's needed by
  phyBOARD-Polis-i.MX8M Mini board.

* tag 'imx-defconfig-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: Enable gpio-fan support
  arm64: defconfig: enable i.MX93 clk & pinctrl

Link: https://lore.kernel.org/r/20220709082951.15123-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.20-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

arm64: tegra: Default configuration updates for v5.20-rc1

Updates the arm64 default configuration to enable the OPE driver as a
module.

* tag 'tegra-for-5.20-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Build Tegra OPE module

Link: https://lore.kernel.org/r/20220708185608.676474-8-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-config64-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig

- enable Allwinner analogue audio codecs

* tag 'sunxi-config64-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: defconfig: Enable Allwinner built in CODECs

Link: https://lore.kernel.org/r/YsheC0hgyJB9kPsS@kista.localdomainSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Remove CONFIG_ARCH_BCM_63XX and add BCMBCA sub platform configs.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Enable the Qualcomm Bandwidth Monitor to allow scaling interconnects
depending on bandwidth usage between CPU and memory.  This is used
already on Qualcomm SDM845 SoC.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-4-krzysztof.kozlowski@linaro.org

Allwinner provide an audio CODEC as part of their SoCs which is used on a
number of designs, enable the driver as part of defconfig in order to
improve coverage of this in the various automated testing systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org

Merge tag 'renesas-arm-defconfig-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.20

  - Enable support for the Renesas R-Car V4H SoC,
  - Refresh shmobile_defconfig for v5.19-rc1.

* tag 'renesas-arm-defconfig-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable R8A779G0 SoC
  ARM: shmobile: defconfig: Refresh for v5.19-rc1

Link: https://lore.kernel.org/r/cover.1656069632.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

While enabling QCS404 interconnect driver, I found that other drivers
are missing too, so add all the interconnect driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-2-vkoul@kernel.org

These phys are used for USB controller found in QCS404 board, so enable
them in the defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-1-vkoul@kernel.org

Enable the driver for Qualcomm Light Pulse Generator block, it is used
on many Qualcomm platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505144913.1432346-1-dmitry.baryshkov@linaro.org

Enable gpio-fan support as this is needed by phyBOARD-Polis-i.MX8M Mini.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

Pull hotfixes from Andrew Morton:
 "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.

  Fixes for this merge window:

   - fix for a damon boot hang, from SeongJae

   - fix for a kfence warning splat, from Jason Donenfeld

   - fix for zero-pfn pinning, from Alex Williamson

   - fix for fallocate hole punch clearing, from Mike Kravetz

  Fixes for previous releases:

   - fix for a performance regression, from Marcelo

   - fix for a hwpoisining BUG from zhenwei pi"

* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add entry for Christian Marangi
  mm/memory-failure: disable unpoison once hw error happens
  hugetlbfs: zero partial pages during fallocate hole punch
  mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
  mm: re-allow pinning of zero pfns
  mm/kfence: select random number before taking raw lock
  MAINTAINERS: add maillist information for LoongArch
  MAINTAINERS: update MM tree references
  MAINTAINERS: update Abel Vesa's email
  MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
  MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
  mailmap: add alias for jarkko@profian.com
  mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
  kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
  mm: lru_cache_disable: use synchronize_rcu_expedited
  mm/page_isolation.c: fix one kernel-doc comment

Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Enable ignore_missing_thread in 'perf stat', enabling counting with
   '--pid' when threads disappear during counting session setup

 - Adjust output data offset for backward compatibility in 'perf inject'

 - Fix missing free in copy_kcore_dir() in 'perf inject'

 - Fix caching files with a wrong build ID

 - Sync drm, cpufeatures, vhost and svn headers with the kernel

* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  perf stat: Enable ignore_missing_thread
  perf inject: Adjust output data offset for backward compatibility
  perf trace beauty: Fix generation of errno id->str table on ALT Linux
  perf build-id: Fix caching files with a wrong build ID
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf inject: Fix missing free in copy_kcore_dir()

Pull btrfs fixes from David Sterba:

 - zoned relocation fixes:
      - fix critical section end for extent writeback, this could lead
        to out of order write
      - prevent writing to previous data relocation block group if space
        gets low

 - reflink fixes:
      - fix race between reflinking and ordered extent completion
      - proper error handling when block reserve migration fails
      - add missing inode iversion/mtime/ctime updates on each iteration
        when replacing extents

 - fix deadlock when running fsync/fiemap/commit at the same time

 - fix false-positive KCSAN report regarding pid tracking for read locks
   and data race

 - minor documentation update and link to new site

* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Documentation: update btrfs list of features and link to readthedocs.io
  btrfs: fix deadlock with fsync+fiemap+transaction commit
  btrfs: don't set lock_owner when locking extent buffer for reading
  btrfs: zoned: fix critical section of relocation inode writeback
  btrfs: zoned: prevent allocation from previous data relocation BG
  btrfs: do not BUG_ON() on failure to migrate space when replacing extents
  btrfs: add missing inode updates on each iteration when replacing extents
  btrfs: fix race between reflinking and ordered extent completion

Pull dma-mapping fix from Christoph Hellwig:

 - pass the correct size to dma_set_encrypted() when freeing memory
   (Dexuan Cui)

* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: use the correct size for dma_set_encrypted()

Pull fbdev fixes from Helge Deller:
 "Two bug fixes for the pxa3xx and intelfb drivers:

   - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

   - intelfb: Initialize value of stolen size

  The other changes are small cleanups, simplifications and
  documentation updates to the cirrusfb, skeletonfb, omapfb,
  intelfb, au1100fb and simplefb drivers"

* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Remove duplicate 'the' in comment
  video: fbdev: omapfb: Align '*' in comment
  video: fbdev: simplefb: Check before clk_put() not needed
  video: fbdev: au1100fb: Drop unnecessary NULL ptr check
  video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
  video: fbdev: skeletonfb: Convert to generic power management
  video: fbdev: cirrusfb: Remove useless reference to PCI power management
  video: fbdev: intelfb: Initialize value of stolen size
  video: fbdev: intelfb: Use aperture size from pci_resource_len
  video: fbdev: skeletonfb: Fix syntax errors in comments

Pull parisc architecture fixes from Helge Deller:

 - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
   machines

 - flush all mappings of a shared anonymous page on PA8800/8900 machines
   via flushing the whole data cache. This may slow down such machines
   but makes sure that the cache is consistent

 - Fix duplicate definition build error regarding fb_is_primary_device()

* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
  parisc: Fix flush_anon_page on PA8800/PA8900
  parisc: align '*' in comment in math-emu code
  parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI

Pull xtensa fixes from Max Filippov:

 - fix OF reference leaks in xtensa arch code

 - replace '.bss' with '.section .bss' to fix entry.S build with old
   assembler

* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: change '.bss' to '.section .bss'
  xtensa: xtfpga: Fix refcount leak bug in setup
  xtensa: Fix refcount leak bug in time.c

Pull powerpc fixes from Michael Ellerman:

 - A fix for a CMA change that broke booting guests with > 2G RAM on
   Power8 hosts.

 - Fix the RTAS call filter to allow a special case that applications
   rely on.

 - A change to our execve path, to make the execve syscall exit
   tracepoint work.

 - Three fixes to wire up our various RNGs earlier in boot so they're
   available for use in the initial seeding in random_init().

 - A build fix for when KASAN is enabled along with
   STRUCTLEAK_BYREF_ALL.

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.

* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: wire up rng during setup_arch
  powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
  powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
  powerpc: Enable execve syscall exit tracepoint
  powerpc/pseries: wire up rng during setup_arch()
  powerpc/microwatt: wire up rng during setup_arch()
  powerpc/mm: Move CMA reservations after initmem_init()

Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit

 - Update the supported arch list in the LLVM document

 - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS

 - Avoid false __KSYM___this_module define in include/generated/autoksyms.h

* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Ignore __this_module in gen_autoksyms.sh
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
  Documentation/llvm: Update Supported Arch table
  modpost: fix section mismatch check for exported init/exit sections

Pull exfat fix from Namjae Jeon:

 - Use updated exfat_chain directly instead of snapshot values in
   rename.

* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: use updated exfat_chain directly during renaming