Pull thermal control fixes from Rafael Wysocki:
 "These take back recent chages that started to confuse users and fix up
  an attr.show callback prototype in a driver.

  Specifics:

   - Stop warning about deprecation of the userspace thermal governor
     and cooling device status interface, because there are cases in
     which user space has to drive thermal management with the help of
     them (Daniel Lezcano)

   - Fix attr.show callback prototype in the int340x thermal driver
     (Kees Cook)"

* tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/governor: Remove deprecated information
  Revert "thermal/core: Deprecate changing cooling device state from userspace"
  thermal: int340x: Fix attr.show callback prototype

Pull power management fixes from Rafael Wysocki:
 "These fix up recent intel_idle driver changes and fix some ARM cpufreq
  driver issues.

  Specifics:

   - Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov,
     Vladimir Zapolskiy).

   - Fix memory leak with the Sun501 driver (Xiaobing Luo).

   - Make intel_idle enable C1E promotion on all CPUs when C1E is
     preferred to C1 (Artem Bityutskiy).

   - Make C6 optimization on Sapphire Rapids added recently work as
     expected if both C1E and C1 are "preferred" (Artem Bityutskiy)"

* tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: Fix SPR C6 optimization
  intel_idle: Fix the 'preferred_cstates' module parameter
  cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
  cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
  cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
  cpufreq: qcom-hw: provide online/offline operations
  cpufreq: qcom-hw: fix the opp entries refcounting
  cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
  cpufreq: qcom-hw: drop affinity hint before freeing the IRQ

Pull ACPI fixes from Rafael WysockiL
 "These fix up the ACPI processor driver after a change made during the
  5.16 cycle that inadvertently broke falling back to shallower C-states
  when C3 cannot be used.

  Specifics:

   - Make the ACPI processor driver avoid falling back to C3 type of
     C-states when C3 cannot be requested (Ville Syrjälä)

   - Revert a quirk that is not necessary any more after fixing the
     underlying issue properly (Ville Syrjälä)"

* tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
  ACPI: processor: idle: Avoid falling back to C3 type C-states

Merge tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Highlights:

   - asus-wmi bug-fixes

   - intel-sdsu bug-fixes

   - build (warning) fixes

   - couple of hw-id additions"

* tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel: pmc/core: change pmc_lpm_modes to static
  platform/x86/intel/sdsi: Fix bug in multi packet reads
  platform/x86/intel/sdsi: Poll on ready bit for writes
  platform/x86/intel/sdsi: Handle leaky bucket
  platform/x86: intel-uncore-freq: Prevent driver loading in guests
  platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard
  platform/x86: dell-laptop: Add quirk entry for Latitude 7520
  platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails
  platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf()
  tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed

Merge tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A minor fix for the DT binding documentation of the rt5190a driver"

* tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: dt-bindings: Revise the rt5190a buck/ldo description

Pull gfs2 fix from Andreas Gruenbacher:

 - No short reads or writes upon glock contention

* tag 'gfs2-v5.18-rc4-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: No short reads or writes upon glock contention

Pull xfs fixes from Dave Chinner:

 - define buffer bit flags as unsigned to fix gcc-5 + c11 warnings

 - remove redundant XFS fields from MAINTAINERS

 - fix inode buffer locking order regression

* tag 'xfs-5.18-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: reorder iunlink remove operation in xfs_ifree
  MAINTAINERS: update IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEM
  xfs: convert buffer flags to unsigned.

Merge a fix for the attr.show callback prototype in the int340x thermal
driver (Kees Cook).

* thermal-int340x:
  thermal: int340x: Fix attr.show callback prototype

Merge cpuidle fixes for 5.18-rc5:

 - Make intel_idle enable C1E promotion on all CPUs when C1E is
   preferred to C1 (Artem Bityutskiy).

 - Make C6 optimization on Sapphire Rapids added recently work as
   expected if both C1E and C1 are "preferred" (Artem Bityutskiy).

* pm-cpuidle:
  intel_idle: Fix SPR C6 optimization
  intel_idle: Fix the 'preferred_cstates' module parameter

Commit 00bfe02f ("gfs2: Fix mmap + page fault deadlocks for buffered
I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
allow dropping the inode glock while faulting in user buffers.  When the
lock was dropped, a short result was returned to indicate that the
operation was interrupted.

As pointed out by Linus (see the link below), this behavior is broken
and the operations should always re-acquire the inode glock and resume
the operation instead.

Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/
Fixes: 00bfe02f ("gfs2: Fix mmap + page fault deadlocks for buffered I/O")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Merge fixes from Andrew Morton:
 "Two patches.

  Subsystems affected by this patch series: mm/kasan and mm/debug"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  docs: vm/page_owner: use literal blocks for param description
  kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time

Sphinx generates hard-to-read lists of parameters at the bottom of the
page.  Fix them by putting literal-block markers of "::" in front of
them.

Link: https://lkml.kernel.org/r/cfd3bcc0-b51d-0c68-c065-ca1c4c202447@gmail.comSigned-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: 57f2b54a ("Documentation/vm/page_owner.rst: update the documentation")
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alex Shi <seakeel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/
destroy().  The kasan_quarantine_remove_cache() call is protected by
cpuslock in kmem_cache_destroy() to ensure serialization with
kasan_cpu_offline().

However the kasan_quarantine_remove_cache() call is not protected by
cpuslock in kmem_cache_shrink().  When a CPU is going offline and cache
shrink occurs at same time, the cpu_quarantine may be corrupted by
interrupt (per_cpu_remove_cache operation).

So add a cpu_quarantine offline flags check in per_cpu_remove_cache().

[akpm@linux-foundation.org: add comment, per Zqiang]

Link: https://lkml.kernel.org/r/20220414025925.2423818-1-qiang1.zhang@intel.comSigned-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Sapphire Rapids (SPR) C6 optimization was added to the end of the
'spr_idle_state_table_update()' function. However, the function has a
'return' which may happen before the optimization has a chance to run.
And this may prevent the optimization from happening.

This is an unlikely scenario, but possible if user boots with, say,
the 'intel_idle.preferred_cstates=6' kernel boot option.

This patch fixes the issue by eliminating the problematic 'return'
statement.

Fixes: 3a9cf77b ("intel_idle: add core C6 optimization for SPR")
Suggested-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Problem description.

When user boots kernel up with the 'intel_idle.preferred_cstates=4' option,
we enable C1E and disable C1 states on Sapphire Rapids Xeon (SPR). In order
for C1E to work on SPR, we have to enable the C1E promotion bit on all
CPUs.  However, we enable it only on one CPU.

Fix description.

The 'intel_idle' driver already has the infrastructure for disabling C1E
promotion on every CPU. This patch uses the same infrastructure for
enabling C1E promotion on every CPU. It changes the boolean
'disable_promotion_to_c1e' variable to a tri-state 'c1e_promotion'
variable.

Tested on a 2-socket SPR system. I verified the following combinations:

 * C1E promotion enabled and disabled in BIOS.
 * Booted with and without the 'intel_idle.preferred_cstates=4' kernel
   argument.

In all 4 cases C1E promotion was correctly set on all CPUs.

Also tested on an old Broadwell system, just to make sure it does not cause
a regression. C1E promotion was correctly disabled on that system, both C1
and C1E were exposed (as expected).

Fixes: da0e58c0 ("intel_idle: add 'preferred_cstates' module argument")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ARM cpufreq fixes for 5.18-rc5 from Viresh Kumar:

"- Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov and
   Vladimir Zapolskiy).
 - Fix memory leak with the Sun501 driver (Xiaobing Luo)."

* tag 'cpufreq-arm-fixes-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
  cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
  cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
  cpufreq: qcom-hw: provide online/offline operations
  cpufreq: qcom-hw: fix the opp entries refcounting
  cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
  cpufreq: qcom-hw: drop affinity hint before freeing the IRQ

If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character.  This patch fixes it.

Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: b7804983 ("lib: add error checking to hex2bin")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity.  It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.

This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.

Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.

I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull zonefs fixes from Damien Le Moal:
 "Two fixes for rc5:

   - Fix inode initialization to make sure that the inode flags are all
     cleared.

   - Use zone reset operation instead of close to make sure that the
     zone of an empty sequential file in never in an active state after
     closing the file"

* tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix management of open zones
  zonefs: Clear inode information flags on inode creation

Pull MTD fixes from Miquel Raynal:
 "Core fix:

   - Fix a possible data corruption of the 'part' field in mtd_info

  Rawnand fixes:

   - Fix the check on the return value of wait_for_completion_timeout

   - Fix wrong ECC parameters for mt7622

   - Fix a possible memory corruption that might panic in the Qcom
     driver"

* tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: qcom: fix memory corruption that causes panic
  mtd: fix 'part' field data corruption in mtd_info
  mtd: rawnand: Fix return value check of wait_for_completion_timeout
  mtd: rawnand: fix ecc parameters for mt7622

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.comReported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sparse reports this issue
core.c: note: in included file:
core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static?

Global variables should not be defined in headers.  This only works
because core.h is only included by core.c. Single file use
variables should be static, so change its storage-class specifier
to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix bug that added an offset to the mailbox addr during multi-packet
reads. Did not affect current ABI since it doesn't support multi-packet
transactions.

Fixes: 2546c600 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Due to change in firmware flow, update mailbox writes to poll on ready bit
instead of run_busy bit. This change makes the polling method consistent
for both writes and reads, which also uses the ready bit.

Fixes: 2546c600 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

To prevent an agent from indefinitely holding the mailbox firmware has
implemented a leaky bucket algorithm. Repeated access to the mailbox may
now incur a delay of up to 2.1 seconds. Add a retry loop that tries for
up to 2.5 seconds to acquire the mailbox.

Fixes: 2546c600 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.

There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.

Fixes: dbce412a ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

This works on my system.
Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@harkSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Before this commit fan_curve_check_present() was trying to not cause
the probe to fail on devices without fan curve control by testing for
known error codes returned by asus_wmi_evaluate_method_buf().

Checking for ENODATA or ENODEV, with the latter being returned by this
function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
is returned. But for other ACPI integer returns this function just returns
them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.

On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:

  asus-nb-wmi: probe of asus-nb-wmi failed with error 2

Instead of playing whack a mole with error codes here, simply treat all
errors as there not being any fan curves, fixing the driver no longer
loading on the Asus U36SD laptop.

Fixes: e3d13da7 ("platform/x86: asus-wmi: Fix regression when probing for fan curve control")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com

This code tests for if the obj->buffer.length is larger than the buffer
but then it just does the memcpy() anyway.

Fixes: 0f0ac158 ("platform/x86: asus-wmi: Add support for custom fan curves")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220413073744.GB8812@kiliReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Pull pin control fixes from Linus Walleij:

 - Fix some register offsets on Intel Alderlake

 - Fix the order the UFS and SDC pins on Qualcomm SM6350

 - Fix a build error in Mediatek Moore.

 - Fix a pin function table in the Sunplus SP7021.

 - Fix some Kconfig and static keywords on the Samsung Tesla FSD SoC.

 - Fix up the EOI function for edge triggered IRQs and keep the block
   clock enabled for level IRQs in the STM32 driver.

 - Fix some bits and order in the Rockchip RK3308 driver.

 - Handle the errorpath in the Pistachio driver probe() properly.

* tag 'pinctrl-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: pistachio: fix use of irq_of_parse_and_map()
  pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested
  pinctrl: rockchip: sort the rk3308_mux_recalced_data entries
  pinctrl: rockchip: fix RK3308 pinmux bits
  pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI
  pinctrl: Fix an error in pin-function table of SP7021
  pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config
  pinctrl: mediatek: moore: Fix build error
  pinctrl: qcom: sm6350: fix order of UFS & SDC pins
  pinctrl: alderlake: Fix register offsets for ADL-N variant
  pinctrl: samsung: staticize fsd_pin_ctrl

Pull fbdev fixes and updates from Helge Deller:
 "A bunch of outstanding fbdev patches - all trivial and small"

* tag 'for-5.18/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: clps711x-fb: Use syscon_regmap_lookup_by_phandle
  video: fbdev: mmp: replace usage of found with dedicated list iterator variable
  video: fbdev: sh_mobile_lcdcfb: Remove sh_mobile_lcdc_check_var() declaration
  video: fbdev: i740fb: Error out if 'pixclock' equals zero
  video: fbdev: i740fb: use memset_io() to clear screen
  video: fbdev: s3fb: Error out if 'pixclock' equals zero
  video: fbdev: arkfb: Error out if 'pixclock' equals zero
  video: fbdev: tridentfb: Error out if 'pixclock' equals zero
  video: fbdev: vt8623fb: Error out if 'pixclock' equals zero
  video: fbdev: kyro: Error out if 'lineclock' equals zero
  video: fbdev: neofb: Fix the check of 'var->pixclock'
  video: fbdev: imxfb: Fix missing of_node_put in imxfb_probe
  video: fbdev: omap: Make it CCF clk API compatible
  video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.h
  video: fbdev: pm2fb: Fix a kernel-doc formatting issue
  linux/fb.h: Spelling s/palette/palette/
  video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300()
  video: fbdev: pxafb: use if else instead
  video: fbdev: udlfb: properly check endpoint type
  video: fbdev: of: display_timing: Remove a redundant zeroing of memory

Pull gfs2 fix from Andreas Gruenbacher:

 - Only re-check for direct I/O writes past the end of the file after
   re-acquiring the inode glock.

* tag 'gfs2-v5.18-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Don't re-check for write past EOF unnecessarily

Pull btrfs fixes from David Sterba:

 - direct IO fixes:

      - restore passing file offset to correctly calculate checksums
        when repairing on read and bio split happens

      - use correct bio when sumitting IO on zoned filesystem

 - zoned mode fixes:

      - fix selection of device to correctly calculate device
        capabilities when allocating a new bio

      - use a dedicated lock for exclusion during relocation

      - fix leaked plug after failure syncing log

 - fix assertion during scrub and relocation

* tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: use dedicated lock for data relocation
  btrfs: fix assertion failure during scrub due to block group reallocation
  btrfs: fix direct I/O writes for split bios on zoned devices
  btrfs: fix direct I/O read repair for split bios
  btrfs: fix and document the zoned device choice in alloc_new_bio
  btrfs: fix leaked plug after failure syncing log on zoned filesystems

Only re-check for direct I/O writes past the end of the file after
re-acquiring the inode glock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.

Fixes: 275157b3 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull f2fs fixes from Jaegeuk Kim:
 "This includes major bug fixes introduced in 5.18-rc1 and 5.17+:

   - Remove obsolete whint_mode (5.18-rc1)

   - Fix IO split issue caused by op_flags change in f2fs (5.18-rc1)

   - Fix a wrong condition check to detect IO failure loop (5.18-rc1)

   - Fix wrong data truncation during roll-forward (5.17+)"

* tag 'f2fs-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: should not truncate blocks during roll-forward recovery
  f2fs: fix wrong condition check when failing metapage read
  f2fs: keep io_flags to avoid IO split due to different op_flags in two fio holders
  f2fs: remove obsolete whint_mode

It turns out that for the CONFIG_MMU=n builds, vmalloc_huge() was never
defined, since it's defined in mm/vmalloc.c, which doesn't get built for
the no-MMU configurations.

Just implement the trivial wrapper for the no-MMU case too.  In fact,
just make it an alias to the existing __vmalloc() function that has the
same signature.

Link: https://lore.kernel.org/all/CAMuHMdVdx2V1uhv_152Sw3_z2xE0spiaWp1d6Ko8-rYmAxUBAg@mail.gmail.com/
Link: https://lore.kernel.org/all/CA+G9fYscb1y4a17Sf5G_Aibt+WuSf-ks_Qjw9tYFy=A4sjCEug@mail.gmail.com/
Link: https://lore.kernel.org/all/20220425150356.GA4138752@roeck-us.net/Reported-and-tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

```-----------------------------------------
unreferenced object 0xffff000010742a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000b4dfebaa>] __kmalloc+0x338/0x474
    [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
    [<000000007d6082a0>] platform_probe+0x98/0x11c
    [<00000000c990f549>] really_probe+0x234/0x5a0
    [<000000002d9fecc6>] __driver_probe_device+0x194/0x224
    [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c
    [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180
    [<000000006720e418>] bus_for_each_drv+0xf8/0x160
    [<00000000df4f14f6>] __device_attach+0x174/0x29c
    [<00000000782002fb>] device_initial_probe+0x20/0x30
    [<00000000c2681b06>] bus_probe_device+0xfc/0x110
    [<00000000964cf3bd>] device_add+0x5f0/0xcd0
    [<000000004b9264e3>] platform_device_add+0x198/0x390
    [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210
    [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
    [<000000000377cc7c>] do_one_initcall+0xe4/0x570
```

-----------------------------------------

if sun50i_cpufreq_get_efuse failed, then opp_tables leak.

Fixes: f328584f ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>