- 26 Oct, 2017 23 commits
-
-
Egil Hjelmeland authored
Make the LAN9303 work when lan9303_probe() is called twice. For some unknown reason the LAN9303 switch fail to forward data when switch fabric port 0 TX is disabled during probe. (Write of LAN9303_MAC_TX_CFG_0 in lan9303_disable_processing_port().) In that situation the switch fabric seem to receive frames, because the ALR is learning addresses. But no frames are transmitted on any of the ports. In our system lan9303_probe() is called twice, first time dsa_register_switch() return -EPROBE_DEFER. As an experiment, modified the code to skip writing LAN9303_MAC_TX_CFG_0, port 0 during the first probe. Then the switch works as expected. Resolve the problem by not calling lan9303_disable_processing_port() on port 0 during probe. Ports 1 and 2 are still disabled. Although unsatisfying that the exact failure mechanism is not known, the patch should not cause any harm. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
Destination buffer already has offset added. So, don't add offset again. Fetch actual size of configured OBQ from hardware, instead of using hardcoded value. Fixes: 7c075ce2 ("cxgb4: collect IBQ and OBQ dumps") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Lipeng says: ==================== net: hns3: fix some bugs for HNS3 driver This patchset fixes some bugs reported by Hisilicon test team. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lipeng authored
When reusing a command description read from HW, driver should set IN_VLD bit, WR bit and NO_INTR bit. If IN_VLD bit and NO_INTR bit are not set, the command fails and driver prints error message: [ 135.261284] hns3 0000:7d:00.0: cmdq execute failed for get_mac_vlan_cmd_status,status=2. [ 135.270983] hns3 0000:7d:00.0: add mac addr failed for cmd_send, ret =-5. This patch fixes the bug. Fixes: 46a3df9f (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lipeng authored
HNS3 driver initialize hdev->roce_client and vport->roce.client in hclge_init_client_instance, and need set hdev->roce_client and vport->roce.client NULL. If do not set them NULL when uninit, it will fail in the scene: insmod hns3.ko, hns-roce.ko, hns-roce-hw-v3.ko successfully, but rmmod hns3.ko after rmmod hns-roce-hw-v2.ko and hns-roce.ko. This patch fixes the issue. Fixes: 46a3df9f (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lipeng authored
Roce driver works base on HNS3 driver.If insmod Roce driver before NIC driver there is a error because do not check nic_client. This patch adds nic_client check when initialize roce base information. Fixes: 46a3df9f (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lipeng authored
The SC bits of TX BD mean switch control. For this area, value 0 indicates no switch control, the packet is routed according to the forwarding table. Value 1 indicates that the packet is transmitted to the network bypassing the forwarding table. As HNS3 driver need support VF later, VF conmunicate with its own PF need forwarding table. This patch sets SC bits of TX BD 0 and use forwarding table. Fixes: 76ad4f0e (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC) Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: don't unmask port bitmaps DSA has several bitmaps to store the type of ports: cpu_port_mask, dsa_port_mask and enabled_port_mask. But the code is inconsistently unmasking them. The legacy code tries to unmask cpu_port_mask and dsa_port_mask but skips enabled_port_mask. The new bindings unmasks cpu_port_mask and enabled_port_mask but skips dsa_port_mask. In fact there is no need to unmask them because we are in the error path, and they won't be used after. Instead of fixing the unmasking, simply remove them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The unapply functions are called on the error path. As for dsa_port_mask, enabled_port_mask and cpu_port_mask won't be used after so there's no need to unmask the corresponding port bit from them. This makes dsa_cpu_port_unapply() and dsa_dsa_port_unapply() identical, which can be factorized later. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The legacy code does not unmask the cpu_port_mask and dsa_port_mask as stated. But this is done on the error path and those masks won't be used after that. So instead of fixing the bit operation, simply remove it. Fixes: 83c0afae ("net: dsa: Add new binding implementation") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Doug Berger says: ==================== net: bcmgenet: start/stop sequence refinement This commit set is the result of an investigation into an issue that occurred when bringing the interface up and down repeatedly with an external 100BASE-T PHY. In some cases the MAC would experience mass receive packet duplication that could in rare cases lead to a stall from overflow. The fix for this is contained in the third commit. The first 3 commits represent bug fixes that should be applied to the net repository and are candidates for backporting to stable releases. The remaining commits are enhancements which is why the set is being submitted to net-next but they are implemented on top of the fixes. The first fix is provided as justification for why the set isn't split between a net submission and a net-next submission. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
Now that the software reset of the PHY has been removed it is no longer necessary to retain a private pointer to the phydev for use when the PHY is detached (which isn't generally safe anyway). The driver now uses the phydev member attached to the net_device. For ethtool commands that have a PHY component, an explicit check is made to prevent accessing an invalid phydev pointer when one is not attached (e.g. interface is down). Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
With commit f7d72996e222 ("net: bcmgenet: enable loopback during UniMAC sw_reset") it is no longer necessary to force the software reset of the internal EPHY before resetting the UniMAC to ensure a clean reset. Therefore this commit reverts commit 5dbebbb4 ("net: bcmgenet: Software reset EPHY after power on"). Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
Since the ring locks are not used in a hard IRQ context it is often not necessary to disable global IRQs while waiting on a lock. Using less restrictive lock and unlock calls improves the real-time responsiveness of the system. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
This commit consolidates more common functionality from bcmgenet_close and bcmgenet_suspend into bcmgenet_netif_stop and modifies the start and stop sequences to better suit the design of the GENET hardware. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
Since the NAPI interrupts are basically ignored when NAPI is disabled we don't need to mask them within the functions bcmgenet_disable_tx_napi() and bcmgenet_disable_rx_napi(). So wait until all NAPI instances are disabled and mask all of the bcmgenet driver interrupts together in bcmgenet_netif_stop(). The interrupts can still be enabled in the functions bcmgenet_enable_tx_napi() and bcmgenet_enable_rx_napi(), but use the ring context int_enable() method to keep the functionality consistent and the code cleaner. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
Since each ring has its own NAPI instance it might as well be initialized along with the other ring context. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
It is necessary for the UniMAC to be clocked at least 5 cycles while the sw_reset is asserted to ensure a clean reset. It was discovered that this condition was not being met when connected to an external RGMII PHY that disabled the Rx clock in the Power Save state. This commit modifies the reset_umac function to place the (RG)MII interface into a local loopback mode where the Rx clock comes from the GENET sourced Tx clk during the sw_reset to ensure the presence and stability of the clock. In addition, it turns out that the sw_reset of the UniMAC is not self clearing, but this was masked by a bug in the timeout code. The sw_reset is now explicitly cleared by zeroing the UMAC_CMD register before returning from reset_umac which makes it no longer necessary to do so in init_umac and makes the clearing of CMD_TX_EN and CMD_RX_EN by umac_enable_set redundant. The timeout code (and its associated bug) are removed so reset_umac no longer needs to return a result, and that means init_umac that calls reset_umac does not need to as well. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
When bcmgenet_dma_teardown is called from bcmgenet_fini_dma it ends up getting called twice from the bcmgenet_close and bcmgenet_suspend functions (once directly and once inside the bcmgenet_fini_dma call). This commit removes the call from bcmgenet_fini_dma and ensures that bcmgenet_dma_teardown is called before bcmgenet_fini_dma in all paths of execution. Fixes: 4a0c081e ("net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Berger authored
As noted in the net-next submission for GENETv5 support [1], there were merge conflicts with an earlier net submission [2] that had not yet found its way to the net-next repository. Unfortunately, when the branches were merged the conflicts were not correctly resolved. This commit attempts to correct that. [1] https://lkml.org/lkml/2017/3/13/1145 [2] https://lkml.org/lkml/2017/3/9/890 Fixes: 101c4314 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Girish Moodalbail authored
commit 635b8c8e ("tap: Renaming tap related APIs, data structures, macros") captured all the tap related fields into a new struct tap_dev. However, it failed to remove those fields from struct macvlan_dev. Those fields are currently unused and must be removed. While there I moved the comment for MAX_TAP_QUEUES to the right place. Fixes: 635b8c8e (tap: Renaming tap related APIs, data structures, macros) Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steven J. Hill authored
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The following warning was reported by syzbot on Oct 24. 2017: KASAN: slab-out-of-bounds Read in tipc_nametbl_lookup_dst_nodes This is a harmless bug, but we still want to get rid of the warning, so we swap the two conditions in question. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Oct, 2017 17 commits
-
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: David Howells <dhowells@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Daniele Venzano <venza@brownhat.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using an explicit static variable to hold additional expiration details. Cc: "David S. Miller" <davem@davemloft.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Reshetova, Elena" <elena.reshetova@intel.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Mike Maloney <maloney@google.com> Cc: Jarno Rajahalme <jarno@ovn.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Adds a pointer back to the sock. Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <edumazet@google.com> Cc: dccp@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "Reshetova, Elena" <elena.reshetova@intel.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Joerg Reuter <jreuter@yaina.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== net: remove rtmsg_ifinfo used in bridge and bonding It's better to send notifications to userspace by the events in rtnetlink_event, instead of calling rtmsg_ifinfo directly. This patcheset is to remove rtmsg_ifinfo called in bonding and bridge, the notifications can be handled by NETDEV_CHANGEUPPER and NETDEV_CHANGELOWERSTATE events in rtnetlink_event. It could also fix some redundant notifications from bonding and bridge. v1->v2: - post to net-next.git instead of net.git, for it's more like an improvement for bonding v2->v3: - add patch 1/4 to remove rtmsg_ifinfo called in add_del_if ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
After the patch 'rtnetlink: bring NETDEV_CHANGELOWERSTATE event process back to rtnetlink_event', bond_lower_state_changed would generate NETDEV_CHANGEUPPER event which would send a notification to userspace in rtnetlink_event. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from these places after bond_lower_state_changed. Besides, after this, rtmsg_ifinfo is not needed to be exported. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to bring NETDEV_CHANGELOWERSTATE event process back to rtnetlink_event so that bonding could use it instead of calling rtmsg_ifinfo to send a notification to userspace after netdev lower state is changed in the later patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Since commit 42e52bf9 ("net: add netnotifier event for upper device change"), netdev_master_upper_dev_link has generated NETDEV_CHANGEUPPER event which would send a notification to userspace in rtnetlink_event. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from bond_master_upper_dev_link as well as bond_upper_dev_unlink to avoid the redundant notifications. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Since commit dc709f37 ("rtnetlink: bring NETDEV_CHANGEUPPER event process back in rtnetlink_event"), rtnetlink_event would process the NETDEV_CHANGEUPPER event and send a notification to userspace. In add_del_if, it would generate NETDEV_CHANGEUPPER event by whether netdev_master_upper_dev_link or netdev_upper_dev_unlink. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from add_del_if also to avoid redundant notifications. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yonghong Song says: ==================== bpf: permit multiple bpf attachments for a single perf tracepoint event This patch set adds support to permit multiple bpf prog attachments for a single perf tracepoint event. Patch 1 does some cleanup such that perf_event_{set|free}_bpf_handler is called under the same condition. Patch 2 has the core implementation, and Patch 3 adds a test case. Changelogs: v2 -> v3: . fix compilation error. v1 -> v2: . fix a potential deadlock issue discovered by Daniel. . fix some coding style issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yonghong Song authored
The bpf sample program syscall_tp is modified to show attachment of more than bpf programs for a particular kernel tracepoint. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-