- 24 Apr, 2008 40 commits
-
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Matthias Schwarzott authored
Add support for composite and s-video inputs on Avermedia DVB-S Pro and DVB-S Hybrid+FM cards (both labled A700) to the saa7134 driver. XC2028 support for Hybrid+FM is still missing. Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Reviewed-by:
Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by:
-
Dâniel Fraga authored
The attached patch adds complete remote control support for Powercolor Real Angel 330. Signed-off-by:
Daniel Fraga <fragabr@gmail.com> Signed-off-by:
-
Dâniel Fraga authored
The attached patch fixes gpio references for Powercolor Real Angel 330. Signed-off-by:
-
Thierry MERLE authored
__PRETTY_FUNCTION__ has no sense in C lang context. Rename it as __func__ Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Guennadi Liakhovetski authored
All drivers should provide a spinlock to be used in videobuf operations. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Reviewed-by:
Brandon Philips <bphilips@suse.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Function pointers and the driver owner are not expected to change throughout soc-camera host's life. Extract them into an operations struct. Signed-off-by:
-
Brandon Philips authored
V4L/DVB (7494): videobuf-dma-sg.c: Avoid NULL dereference and add comment about backwards compatibility Signed-off-by:
-
Brandon Philips authored
Add a waitqueue to wait on when there are no buffers in the buffer queue. DQBUF waits on this queue without holding vb_lock to allow a QBUF to happen. Once a buffer has been queued we recheck that the queue is still streaming and wait on the new buffer's waitqueue while holding the vb_lock. The driver should come along in a timely manner and put the buffer into its next state finishing the DQBUF. By implementing this waitqueue it also brings the videobuf DQBUF up to spec and it now blocks on O_NONBLOCK even when no buffers have been queued via QBUF: "By default VIDIOC_DQBUF blocks when no buffer is in the outgoing queue." - V4L2 spec Signed-off-by:
-
Brandon Philips authored
vivi previously had a very complex queuing system and held spinlocks while doing copy_to_user, kmalloc, etc. This caused the driver to easily deadlock when a multi-threaded application used it and revealed bugs in videobuf too. This replaces the copy_to_user with memcpy since we were never copying to user space addresses. And makes the kmalloc atomic. Signed-off-by:
-
Brandon Philips authored
vivi currently doesn't have the infrastructure to handle being opened more than one time and will crash if it is. So, make it openable only once. Signed-off-by:
-
Brandon Philips authored
Remove the buf_release on vm_close because it will lead to a buffer being released multiple times since all buffers are already freed under the two possible cases: device close or STREAMOFF. Signed-off-by:
-
Brandon Philips authored
Possible missed wakeup- use kernel helpers for wait queues http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg27983.htmlSigned-off-by:
-
Brandon Philips authored
The waitqueues must be woken up every time state changes. Signed-off-by:
-
Michael Krufky authored
tuner-simple is the only module that uses tuner-types - these will be merged to a single module in the future. For now, build both of them if TUNER_SIMPLE is selected. This fixes the following build warning, if tuner-simple is selected without tuner-types: WARNING: "tuner_count" [tuner-simple.ko] undefined! WARNING: "tuners" [tuner-simple.ko] undefined! Signed-off-by:
-
Michael Krufky authored
Show IF level and rf agc top settings in standard map dumps. Dump standard map during attach if DBG_MAP or DBG_ADV is set. Signed-off-by:
-
Adrian Bunk authored
This patch makes the needlessly global sn9c102_i2c_try_write() static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> CC: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by:
-
Adrian Bunk authored
This patch adds a proper prototype for zr36016_write() in drivers/media/video/zoran_card.h Signed-off-by:
-
Darryl Green authored
Detect Leadtek Winfast USB DTV Dongle with ID of 0x6f01 Signed-off-by:
Darryl Green <darryl.green@aanet.com.au> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Alexander Simon authored
Alexander Simon found out that the Terratec Cinergy T USB XXS is just a clone of another DiB7070P-based device. Signed-off-by:
-
Patrick Boettcher authored
This patch enables support for repeating last event when a key is holded down with dib0700 devices. It works with rc5 and nec remotes. It also fixes an annoying bug that floods kernel log with "Unknown key" messages after each keypress. This happened because the driver was not resetting infrared register after each poll so it kept polling last key even if nothing was being pressed. Fixing this, (calling rc_setup after each poll), permits to implement key repeat. Signed-off-by: Filippo Argiolas <filippo.argiolas at gmail.com> Signed-off-by:
-
Albert Comerma authored
This patch introduces support for dvb-t for the following DiBcom based cards: - Terratec Cinergy HT USB XE (USB-ID: 0ccd:0058) - Terratec Cinergy HT Express (USB-ID: 0ccd:0060) - Pinnacle 320CX (USB-ID: 2304:022e) - Pinnacle PCTV72e (USB-ID: 2304:0236) - Pinnacle PCTV73e (USB-ID: 2304:0237) - Yuan EC372S (USB-ID: 1164:1edc) Signed-off-by:
Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by:
Felix Apitzsch <F.Apitzsch@soz.uni-frankfurt.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Albert Comerma <albert.comerma@gmail.com> Signed-off-by:
-
Andre Weidemann authored
Added support for Technotrend connect S-2400. Signed-off-by:
Andre Weidemann <Andre.Weidemann@web.de> Signed-off-by:
-
Patrick Boettcher authored
To support a new device based on CX24123 (using the CX24113-tuner) the following was done: - added two parameters to de-select the internal PLL-driver (for CX24108) and a AGC-function callback. - added a virtual i2c-adapter which allow simple access behind the i2c-gate - cleanup up some code Signed-off-by:
-
Patrick Boettcher authored
To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by:
-
Frej Drejhammar authored
An enabled color killer will not degrade picture quality for color input signals, only suppress bogus color information on black-and-white input. Therefore enable it by default. Signed-off-by:
Frej Drejhammar <frej.drejhammar@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Cyrill Gorcunov <gorcunov@gmail.com> for pointing this Signed-off-by: -
Roel Kluin authored
include/linux/video_decoder.h: 34:#define DECODER_SET_NORM _IOW('d', 3, int) 35:#define DECODER_SET_INPUT _IOW('d', 4, int) untested, please confirm it's right. Test cmd value, not definition of DECODER_SET_INPUT Signed-off-by:Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to timf <timf@iinet.net.au>, "Richard (MQ)" <osl2008@googlemail.com> and gian luca rasponi <lucarasp@inwind.it> for their tests. Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Jiri Slaby <jirislaby@gmail.com> for pointing this issue. Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Michael Krufky for pointing this. Signed-off-by: -
Frej Drejhammar authored
The cx2388x family has a color killer. This patch implements the V4L2_CID_COLOR_KILLER control for the cx2388x family. By default the color killer is disabled, as in previous versions of the driver. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by:
-
