This patch defines a library containing two initial template fields,
inode digest (d) and file name (n), the 'ima' template descriptor,
whose format is 'd|n', and two helper functions,
ima_write_template_field_data() and ima_show_template_field_data().

Changelog:
- replace ima_eventname_init() parameter NULL checking with BUG_ON.
  (suggested by Mimi)
- include "new template fields for inode digest (d) and file name (n)"
  definitions to fix a compiler warning.  - Mimi
- unnecessary to prefix static function names with 'ima_'. remove
  prefix to resolve Lindent formatting changes. - Mimi
- abbreviated/removed inline comments - Mimi
- always send the template field length - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

The original 'ima' template is fixed length, containing the filedata hash
and pathname.  The filedata hash is limited to 20 bytes (md5/sha1).  The
pathname is a null terminated string, limited to 255 characters.  To
overcome these limitations and to add additional file metadata, it is
necessary to extend the current version of IMA by defining additional
templates.

The main reason to introduce this feature is that, each time a new
template is defined, the functions that generate and display the
measurement list would include the code for handling a new format and,
thus, would significantly grow over time.

This patch set solves this problem by separating the template management
from the remaining IMA code. The core of this solution is the definition
of two new data structures: a template descriptor, to determine which
information should be included in the measurement list, and a template
field, to generate and display data of a given type.

To define a new template field, developers define the field identifier
and implement two functions, init() and show(), respectively to generate
and display measurement entries.  Initially, this patch set defines the
following template fields (support for additional data types will be
added later):
 - 'd': the digest of the event (i.e. the digest of a measured file),
        calculated with the SHA1 or MD5 hash algorithm;
 - 'n': the name of the event (i.e. the file name), with size up to
        255 bytes;
 - 'd-ng': the digest of the event, calculated with an arbitrary hash
           algorithm (field format: [<hash algo>:]digest, where the digest
           prefix is shown only if the hash algorithm is not SHA1 or MD5);
 - 'n-ng': the name of the event, without size limitations.

Defining a new template descriptor requires specifying the template format,
a string of field identifiers separated by the '|' character.  This patch
set defines the following template descriptors:
 - "ima": its format is 'd|n';
 - "ima-ng" (default): its format is 'd-ng|n-ng'

Further details about the new template architecture can be found in
Documentation/security/IMA-templates.txt.

Changelog:
- don't defer calling ima_init_template() - Mimi
- don't define ima_lookup_template_desc() until used - Mimi
- squashed with documentation patch - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Instead of allocating and initializing the template entry from multiple
places (eg. boot aggregate, violation, and regular measurements), this
patch defines a new function called ima_alloc_init_template().  The new
function allocates and initializes the measurement entry with the inode
digest and the filename.

In respect to the current behavior, it truncates the file name passed
in the 'filename' argument if the latter's size is greater than 255 bytes
and the passed file descriptor is NULL.

Changelog:
- initialize 'hash' variable for non TPM case - Mimi
- conform to expectation for 'iint' to be defined as a pointer. - Mimi
- add missing 'file' dependency for recalculating file hash. - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Pass the filename argument to ima_add_template_entry() in order to
eliminate a dependency on template specific data (third argument of
integrity_audit_msg).

This change is required because, with the new template management
mechanism, the generation of a new measurement entry will be performed
by new specific functions (introduced in next patches) and the current IMA
code will not be aware anymore of how data is stored in the entry payload.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Pass the file descriptor instead of the inode to ima_add_violation(),
to make the latter consistent with ima_store_measurement() in
preparation for the new template architecture.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

With multiple hash algorithms, ima_hash_tfm is no longer guaranteed to be sha1.
Need to force to use sha1.

Changelog:
- pass ima_digest_data to ima_calc_boot_aggregate() instead of char *
  (Roberto Sassu);
- create an ima_digest_data structure in ima_add_boot_aggregate()
  (Roberto Sassu);
- pass hash->algo to ima_alloc_tfm() (Roberto Sassu, reported by Dmitry).
- "move hash definition in ima_add_boot_aggregate()" commit hunk to here.
- sparse warning fix - Fengguang Wu
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

ima_calc_buffer_hash will be used with different hash algorithms.
This patch provides support for arbitrary hash algorithms in
ima_calc_buffer_hash.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

This patch provides dedicated hash algo allocation and
deallocation function which can be used by different clients.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

The TPM v1.2 limits the template hash size to 20 bytes.  This
patch differentiates between the template hash size, as defined
in the ima_template_entry, and the file data hash size, as
defined in the ima_template_data.  Subsequent patches add support
for different file data hash algorithms.

Change log:
- hash digest definition in ima_store_template() should be TPM_DIGEST_SIZE
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>

For each inode in the IMA policy, an iint is allocated.  To support
larger hash digests, the iint digest size changed from 20 bytes to
the maximum supported hash digest size.  Instead of allocating the
maximum size, which most likely is not needed, this patch dynamically
allocates the needed hash storage.

Changelog:
- fix krealloc bug
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

For possibility to use xattr type for new signature formats,
pass full xattr to the signature verification function.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

All files on the filesystem, currently, are hashed using the same hash
algorithm.  In preparation for files from different packages being
signed using different hash algorithms, this patch adds support for
reading the signature hash algorithm from the 'security.ima' extended
attribute and calculates the appropriate file data hash based on it.

Changelog:
- fix scripts Lindent and checkpatch msgs - Mimi
- fix md5 support for older version, which occupied 20 bytes in the
  xattr, not the expected 16 bytes.  Fix the comparison to compare
  only the first 16 bytes.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

In preparation of supporting more hash algorithms with larger hash sizes
needed for signature verification, this patch replaces the 20 byte sized
digest, with a more flexible structure.  The new structure includes the
hash algorithm, digest size, and digest.

Changelog:
- recalculate filedata hash for the measurement list, if the signature
  hash digest size is greater than 20 bytes.
- use generic HASH_ALGO_
- make ima_calc_file_hash static
- scripts lindent and checkpatch fixes
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

This patch makes use of the newly defined common hash algorithm info,
replacing, for example, PKEY_HASH with HASH_ALGO.

Changelog:
- Lindent fixes - Mimi

CC: David Howells <dhowells@redhat.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

This patch provides a single place for information about hash algorithms,
such as hash sizes and kernel driver names, which will be used by IMA
and the public key code.

Changelog:
- Fix sparse and checkpatch warnings
- Move hash algo enums to uapi for userspace signing functions.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit 4c2c3927.

Everything in the initramfs should be measured and appraised,
but until the initramfs has extended attribute support, at
least measured.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: Stable Kernel <stable@kernel.org>

Fix checkpatch, lindent, etc, warnings/errors
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

just like the other entries
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

This patch changes the displayed module name from
tpm_tis_i2c_infineon to its actual name tpm_i2c_infineon.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

This is based on the work of Teddy Reed <teddy@prosauce.org> published
on GitHub:
 https://github.com/theopolis/tpm-i2c-atmel.git
 34894b988b67e0ae55088d6388e77b0dbf10c07d

That driver was never merged, I have taken it as a starting port,
forward ported, tested and revised the driver:
 - Make it broadly textually similar to the Infineon and Nuvoton I2C
   driver
 - Place everything in a format suitable for mainline inclusion
 - Use high level I2C functions i2c_master_send and
   i2c_master_recv for data xfer
 - Use the timeout system from the core code, by faking out a status
   register
 - Only I2C transfer the number of bytes in the reply, not a fixed
   message size.
 - checkpatch cleanups
 - Testing on ARM Kirkwood, with this device tree, using a
   AT97SC3204T-X1A180
        tpm@29 {
                compatible = "atmel,at97sc3204t";
                reg = <0x29>;
        };
Signed-off-by: Teddy Reed <teddy@prosauce.org>
[jgg: revised and tested]
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[phuewe: minor whitespace changes]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

This chip is/was also branded as a Winbond WPCT301.

Originally written by Dan Morav <dmorav@nuvoton.com> and posted to LKML:
https://lkml.org/lkml/2011/9/7/206

The original posting was not merged, I have taken it as a
starting point, forward ported, tested and revised the driver:
 - Rework interrupt handling to work properly with level triggered
   interrupts. The old version just locked up.
 - Synchronize various items with Peter Huewe's Infineon driver:
    * Add durations/timeouts sysfs calls
    * Remove I2C device auto-detection
    * Don't fiddle with chip->release
    * Call tpm_dev_vendor_release in the probe error path
    * Use MODULE_DEVICE_TABLE for the I2C ids
    * Provide OF compatible strings for DT support
    * Use SIMPLE_DEV_PM_OPS
    * Use module_i2c_driver
 - checkpatch cleanups
 - Testing on ARM Kirkwood with GPIO interrupts, with this device tree:
	tpm@57 {
                compatible = "nuvoton,npct501";
                reg = <0x57>;
                interrupt-parent = <&gpio1>;
                interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
        };
Signed-off-by: Dan Morav <dmorav@nuvoton.com>
[jgg: revised and tested]
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[phuewe: minor whitespace changes, fixed module name in kconfig]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Now that we can have multiple .c files in the tpm module there is
no reason for tpm-bios.

tpm-bios exported several functions: tpm_bios_log_setup,
tpm_bios_log_teardown, tpm_add_ppi, and tpm_remove_ppi.

They are only used by tpm, and if tpm-bios is built then
tpm will unconditionally require them. Further, tpm-bios does
nothing on its own, it has no module_init function.

Thus we remove the exports and merge the modules to simplify things.

The Makefile conditions are changed slightly to match the code,
tpm_ppi is always required if CONFIG_ACPI is set.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>

This is preparation for making the tpm module multi-file. kbuild does
not like having a .c file with the same name as a module. We wish to
keep the tpm module name so that userspace doesn't see this change.

tpm-interface.c is chosen because the next several commits in the series
migrate items into tpm-sysfs.c, tpm-dev.c and tpm-class.c. All that will
be left is tpm command processing and interfacing code.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>

before we rename the file it might be a good idea to cleanup the long
persisting checkpatch warnings.
Since everything is really trivial, splitting the patch up would only
result in noise.

For the interested reader - here the checkpatch warnings:
(regrouped for easer readability)

ERROR: trailing whitespace
+ * Specifications at www.trustedcomputinggroup.org^I $
+ * $
+^I/* $
+^I   parameters (RSA 12->bytes: keybit, #primes, expbit)  $

WARNING: unnecessary whitespace before a quoted newline
+			"invalid count value %x %zx \n", count, bufsiz);

ERROR: do not use assignment in if condition
+	if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) {

ERROR: space required after that ',' (ctx:VxV)
+	len = tpm_transmit(chip,(u8 *) cmd, len);
 	                       ^

ERROR: "foo * bar" should be "foo *bar"
+ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr,
+ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr,
+ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr,
+ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr,
+ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr,
+ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr,
+ssize_t tpm_show_temp_deactivated(struct device * dev,
+				struct device_attribute * attr, char *buf)

WARNING: please, no space before tabs
+ * @chip_num: ^Itpm idx # or ANY$
+ * @res_buf: ^ITPM_PCR value$
+ * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$
+ * @chip_num: ^Itpm idx # or AN&$
+ * @hash: ^Ihash value used to extend pcr value$

ERROR: code indent should use tabs where possible
+^I                                     TPM_ORD_CONTINUE_SELFTEST);$

WARNING: line over 80 characters
+static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel,

ERROR: trailing whitespace
+ * Called from tpm_<specific>.c probe function only for devices $

total: 16 errors, 7 warnings, 1554 lines checked
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

The version of the TPM should not depend on the bus it is connected
through. 1.1, 1.2 and soon 2.0 TPMS will be all be able to use the
same bus interfaces.

Make tpm_show_caps try the 1.2 capability first. If that fails then
fall back to the 1.1 capability. This effectively auto-detects what
interface the TPM supports at run-time.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

For some reason this driver thinks that chip->data_buffer needs
to be set before it can call tpm_pm_*. This is not true. data_buffer
is used only by /dev/tpmX, which is why it is managed exclusively
by the fops functions.

Cc: Mathias Leblanc <mathias.leblanc@st.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>

TPM drivers should not call dev_set_drvdata (or aliases), only the core
code is allowed to call dev_set_drvdata, and it does it during
tpm_register_hardware.

These extra sets are harmless, but are an anti-pattern that many drivers
have copied.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ashley Lai <adlai@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

misc_open sets the file->private_date to the misc_dev when calling
open. We can use container_of to go from the misc_dev back to the
tpm_chip.

Future clean ups will move tpm_open into a new file and this change
means we do not have to export the tpm_chip list.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ashley Lai <adlai@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Just put the memory directly in the chip structure, rather than
in a 2nd dedicated kmalloc.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ashley Lai <adlai@linux.vnet.ibm.com>

Commit e0dd03ca ("tpm: return chip from
tpm_register_hardware") changed the code path here so that
ateml_get_base_addr no longer directly altered the tpm_vendor_specific
structure, and instead placed the base address on the stack.

The commit missed updating the request_region call, which would have
resulted in request_region being called with 0 as the base address.

I don't know if request_region(0, ..) will fail, if so the
driver has been broken since 2006 and we should remove it
from the tree as it has no users.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

This suppresses compile warnings on 32 bit builds.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ashley Lai <adlai@linux.vnet.ibm.com>

Since I'm actively maintaining the tpm subsystem for a few months now,
it's time to step up and be an official maintainer for the tpm subsystem,
atleast until I hear something different from my company.

The maintaining is done solely in my private time, out of private interest.
Speaking only on behalf of myself, trying to be as vendor neutral as possible.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

The SELinux/NetLabel glue code has a locking bug that affects systems
with NetLabel enabled, see the kernel error message below.  This patch
corrects this problem by converting the bottom half socket lock to a
more conventional, and correct for this call-path, lock_sock() call.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.11.0-rc3+ #19 Not tainted
 -------------------------------
 net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 2 locks held by ping/731:
  #0:  (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect
  #1:  (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr

 stack backtrace:
 CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500
  ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000
  000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7
 Call Trace:
  [<ffffffff81726b6a>] dump_stack+0x54/0x74
  [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120
  [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0
  [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190
  [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190
  [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0
  [<ffffffff81303025>] selinux_socket_connect+0x135/0x170
  [<ffffffff8119d127>] ? might_fault+0x57/0xb0
  [<ffffffff812fb146>] security_socket_connect+0x16/0x20
  [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130
  [<ffffffff81739a85>] ? sysret_check+0x22/0x5d
  [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff815d52be>] SyS_connect+0xe/0x10
  [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b

Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Signed-off-by: Antonio Alecrim Jr <antonio.alecrim@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>

This patch fixes lack of license, otherwise x509_key_parser.ko taints kernel.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: David Howells <dhowells@redhat.com>

This patch fixes lack of license, otherwise mpi.ko taints kernel.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: David Howells <dhowells@redhat.com>

In order to create the integrity keyrings (eg. _evm, _ima), root's
uid and session keyrings need to be initialized early.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Only public keys, with certificates signed by an existing
'trusted' key on the system trusted keyring, should be added
to a trusted keyring.  This patch adds support for verifying
a certificate's signature.

This is derived from David Howells pkcs7_request_asymmetric_key() patch.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>