- 03 Jul, 2017 3 commits
-
-
Christophe Lombard authored
This patch exports a in-kernel 'library' API which can be called by other drivers to help interacting with an IBM XSL on a POWER9 system. The XSL (Translation Service Layer) is a stripped down version of the PSL (Power Service Layer) used in some cards such as the Mellanox CX5. Like the PSL, it implements the CAIA architecture, but has a number of differences, mostly in it's implementation dependent registers. The XSL also uses a special DMA cxl mode, which uses a slightly different init sequence for the CAPP and PHB. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Merge our fixes branch, a few of them are tripping people up while working on top of next, and we also have a dependency between the CXL fixes and new CXL code we want to merge into next.
-
Masahiro Yamada authored
Most of DT files in PowerPC use #include "..." to make pre-processor include DT in the same directory, but we have 3 exceptional files that use #include <...> for that. Fix them to remove -I$(srctree)/arch/$(SRCARCH)/boot/dts path from dtc_cpp_flags. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 02 Jul, 2017 19 commits
-
-
Thiago Jung Bauermann authored
On POWER9 SMT8 the 24x7 API returns two result elements for physical core and virtual CPU events and we need to add their counts to get the final result. Reviewed-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by:
-
Thiago Jung Bauermann authored
POWER9 introduces a new version of the hypervisor API to access the 24x7 perf counters. The new version changed some of the structures used for requests and results. Signed-off-by:
-
Thiago Jung Bauermann authored
There's an H24x7_DATA_BUFFER_SIZE constant, so use it in init_24x7_request. There's also an HV_PERF_DOMAIN_MAX constant, so use it in h_24x7_event_init. This makes the comment above the check redundant, so remove it. In add_event_to_24x7_request, a statement is terminated with a comma instead of a semicolon. Fix it. In hv-24x7.h, improve comments in struct hv_24x7_result. Signed-off-by:
-
Thiago Jung Bauermann authored
The H_GET_24X7_CATALOG_PAGE hcall can return a signed error code, so fix this in the code. The H_GET_24X7_DATA hcall can return a signed error code, so fix this in the code. Also, don't truncate it to 32 bit to use as return value for make_24x7_request. In case of error h_24x7_event_commit_txn passes that return value to generic code, so it should be a proper errno. The other caller of make_24x7_request is single_24x7_request, whose callers don't actually care which error code is returned so they are not affected by this change. Finally, h_24x7_get_value doesn't use the error code from single_24x7_request, so there's no need to store it. Reviewed-by:
-
Thiago Jung Bauermann authored
make_24x7_request already calls log_24x7_hcall if it fails, so callers don't have to do it again. In fact, since the latter is now only called from the former, there's no need for a separate log_24x7_hcall anymore so remove it. Reviewed-by:
-
Thiago Jung Bauermann authored
hv-24x7.h has a comment mentioning that result_buffer->results can't be indexed as a normal array because it may contain results of variable sizes, so fix the loop in h_24x7_event_commit_txn to take the variation into account when iterating through results. Another problem in that loop is that it sets h24x7hw->events[i] to NULL. This assumes that only the i'th result maps to the i'th request, but that is not guaranteed to be true. We need to leave the event in the array so that we don't dereference a NULL pointer in case more than one result maps to one request. We still assume that each result has only one result element, so warn if that assumption is violated. Reviewed-by:
-
Thiago Jung Bauermann authored
request_buffer can hold 254 requests, so if it already has that number of entries we can't add a new one. Also, define constant to show where the number comes from. Fixes: e3ee15dc ("powerpc/perf/hv-24x7: Define add_event_to_24x7_request()") Reviewed-by:
-
Thiago Jung Bauermann authored
H_GET_24X7_CATALOG_PAGE needs to be passed the version number obtained from the first catalog page obtained previously. This is a 64 bit number, but create_events_from_catalog truncates it to 32-bit. This worked on POWER8, but POWER9 actually uses the upper bits so the call fails with H_P3 because the hypervisor doesn't recognize the version. This patch also adds the hcall return code to the error message, which is helpful when debugging the problem. Fixes: 5c5cd7b5 ("powerpc/perf/hv-24x7: parse catalog and populate sysfs with events") Reviewed-by:
-
Oliver O'Halloran authored
Flip the switch. Running around and screaming "IT'S ALIVE" is optional, but recommended. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Anton Blanchard authored
Adds support for removing bolted (i.e kernel linear mapping) mappings on powernv. This is needed to support memory hot unplug operations which are required for the teardown of DAX/PMEM devices. Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Oliver O'Halloran authored
Add support for the devmap bit on PTEs and PMDs for PPC64 Book3S. This is used to differentiate device backed memory from transparent huge pages since they are handled in more or less the same manner by the core mm code. Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
Adds support to powerpc for the altmap feature of ZONE_DEVICE memory. An altmap is a driver provided region that is used to provide the backing storage for the struct pages of ZONE_DEVICE memory. In situations where large amount of ZONE_DEVICE memory is being added to the system the altmap reduces pressure on main system memory by allowing the mm/ metadata to be stored on the device itself rather in main memory. Reviewed-by:
-
Oliver O'Halloran authored
Removes an indentation level and shuffles some code around to make the following patch cleaner. No functional changes. Reviewed-by:
-
Oliver O'Halloran authored
Currently ZONE_DEVICE depends on X86_64 and this will get unwieldly as new architectures (and platforms) get ZONE_DEVICE support. Move to an arch selected Kconfig option to save us the trouble. Cc: linux-mm@kvack.org Acked-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
-
Oliver O'Halloran authored
Export it so it can be referenced inside a module. Signed-off-by:
-
Andrew Donnellan authored
As Ian's stepping down from his maintainer role now that he's leaving IBM, Frederic has asked me to add myself to the cxl maintainer list. Updating accordingly. Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Ian Munsie authored
I am no longer employed by IBM and will no longer have access to cxl hardware, so remove myself as a cxl maintainer. If anyone needs to contact me in the future, please use my personal email address darkstarsword@gmail.com Signed-off-by:
-
Nicholas Piggin authored
Use the different spin loop primitives in some simple powerpc spin loops, including those which will spin as a common case. This will help to test the spin loop primitives before more conversions are done. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Add some includes of <linux/processor.h>] Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
- 28 Jun, 2017 18 commits
-
-
Nicholas Piggin authored
Current busy-wait loops are implemented by repeatedly calling cpu_relax() to give an arch option for a low-latency option to improve power and/or SMT resource contention. This poses some difficulties for powerpc, which has SMT priority setting instructions (priorities determine how ifetch cycles are apportioned). powerpc's cpu_relax() is implemented by setting a low priority then setting normal priority. This has several problems: - Changing thread priority can have some execution cost and potential impact to other threads in the core. It's inefficient to execute them every time around a busy-wait loop. - Depending on implementation details, a `low ; medium` sequence may not have much if any affect. Some software with similar pattern actually inserts a lot of nops between, in order to cause a few fetch cycles with the low priority. - The busy-wait loop runs with regular priority. This might only be a few fetch cycles, but if there are several threads running such loops, they could cause a noticable impact on a non-idle thread. Implement spin_begin, spin_end primitives that can be used around busy wait loops, which default to no-ops. And spin_cpu_relax which defaults to cpu_relax. This will allow architectures to hook the entry and exit of busy-wait loops, and will allow powerpc to set low SMT priority at entry, and normal priority at exit. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Akshay Adiga authored
pnv_wakeup_noloss() expects r12 to contain SRR1 value to determine if the wakeup reason is an HMI in CHECK_HMI_INTERRUPT. When we wakeup with ESL=0, SRR1 will not contain the wakeup reason, so there is no point setting r12 to SRR1. However, we don't set r12 at all so r12 contains garbage (likely a kernel pointer), and is still used to check HMI assuming that it contained SRR1. This causes the OPAL msglog to be filled with the following print: HMI: Received HMI interrupt: HMER = 0x0040000000000000 This patch clears r12 after waking up from stop with ESL=EC=0, so that we don't accidentally enter the HMI handler in pnv_wakeup_noloss() if the value of r12[42:45] corresponds to HMI as wakeup reason. Prior to commit 9d292501 ("powerpc/64s/idle: Avoid SRR usage in idle sleep/wake paths") this bug existed, in that we would incorrectly look at SRR1 to check for a HMI when SRR1 didn't contain a wakeup reason. However the SRR1 value would just happen to never have bits 42:45 set. Fixes: 9d292501 ("powerpc/64s/idle: Avoid SRR usage in idle sleep/wake paths") Signed-off-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by:
-
Anshuman Khandual authored
Adds some explaination on how the vmemmap based struct page layout's physical mapping is allocated and tracked through linked list. It also keeps note of a possible race condition. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
Anshuman Khandual authored
Add some explaination to the layout of vmemmap virtual address space and how physical page mapping is only used for valid PFNs present at any point on the system. Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Santosh Sivaraj authored
nr_cpu_ids can be limited by nr_cpus boot parameter, whereas NR_CPUS is a compile time constant, which shouldn't be compared against during cpu kick. Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Santosh Sivaraj authored
During secondary start, we do not need to BUG_ON if an invalid CPU number is passed. We already print an error if secondary cannot be started, so just return an error instead. Signed-off-by:
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by:
Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by:
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by:
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by:
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by:
-
Nicholas Piggin authored
A memory barrier is not required after the task wakes up, only if we clear the polling flag before waking. The case where we have work to do is the important one, so optimise for it. Reviewed-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Ensure these don't get put into bouncing cachelines. Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
local_irq_enable can cause interrupts to be taken which could take significant amount of processing time. The idle process should set its polling flag before this, so another process that wakes it during this time will not have to send an IPI. Expand the TIF_POLLING_NRFLAG coverage to as large as possible. Reviewed-by:
-
Hari Bathini authored
Around 95% of memory is reserved by fadump/capture kernel. All this memory is freed, one page at a time, on writing '1' to the node /sys/kernel/fadump_release_mem. On systems with large memory, this can take a long time to complete, leading to soft lockup warning messages. To avoid this, add reschedule points at regular intervals. Also, while memblock_reserve() implicitly takes care of holes in the given memory range while reserving memory, those holes need to be taken care of while releasing memory as memory is freed one page at a time. Add support to skip holes while releasing memory. Suggested-by:
Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by:
-
Hari Bathini authored
fadump fails to register when there are holes in boot memory area. Provide a helpful error message to the user in such case. Signed-off-by:
-
Hari Bathini authored
To register fadump, boot memory area - the size of low memory chunk that is required for a kernel to boot successfully when booted with restricted memory, is assumed to have no holes. But this memory area is currently not protected from hot-remove operations. So, fadump could fail to re-register after a memory hot-remove operation, if memory is removed from boot memory area. To avoid this, ensure that memory from boot memory area is not hot-removed when fadump is registered. Signed-off-by:
Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Hari Bathini authored
fadump sets up crash memory ranges to be used for creating PT_LOAD program headers in elfcore header. Memory chunk RMA_START through boot memory area size is added as the first memory range because firmware, at the time of crash, moves this memory chunk to different location specified during fadump registration making it necessary to create a separate program header for it with the correct offset. This memory chunk is skipped while setting up the remaining memory ranges. But currently, there is possibility that some of this memory may have duplicate entries like when it is hot-removed and added again. Ensure that no two memory ranges represent the same memory. When 5 lmbs are hot-removed and then hot-plugged before registering fadump, here is how the program headers in /proc/vmcore exported by fadump look like without this change: Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align NOTE 0x0000000000010000 0x0000000000000000 0x0000000000000000 0x0000000000001894 0x0000000000001894 0 LOAD 0x0000000000021020 0xc000000000000000 0x0000000000000000 0x0000000040000000 0x0000000040000000 RWE 0 LOAD 0x0000000040031020 0xc000000000000000 0x0000000000000000 0x0000000010000000 0x0000000010000000 RWE 0 LOAD 0x0000000050040000 0xc000000010000000 0x0000000010000000 0x0000000050000000 0x0000000050000000 RWE 0 LOAD 0x00000000a0040000 0xc000000060000000 0x0000000060000000 0x000000019ffe0000 0x000000019ffe0000 RWE 0 and with this change: Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align NOTE 0x0000000000010000 0x0000000000000000 0x0000000000000000 0x0000000000001894 0x0000000000001894 0 LOAD 0x0000000000021020 0xc000000000000000 0x0000000000000000 0x0000000040000000 0x0000000040000000 RWE 0 LOAD 0x0000000040030000 0xc000000040000000 0x0000000040000000 0x0000000020000000 0x0000000020000000 RWE 0 LOAD 0x0000000060030000 0xc000000060000000 0x0000000060000000 0x000000019ffe0000 0x000000019ffe0000 RWE 0 Signed-off-by:
-
