In this if statement:

        if (head + event->header.size >= mmap_size) {
                if (mmaps[map_idx]) {
                        munmap(mmaps[map_idx], mmap_size);
                        mmaps[map_idx] = NULL;
                }

                page_offset = page_size * (head / page_size);
                file_offset += page_offset;
                head -= page_offset;
                goto remap;
        }

With, for instance, these values:

head=2992
event->header.size=48
mmap_size=3040

We end up endlessly looping back to remap. Off by one.

Problem introduced in 55b4462.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: David Ahern <daahern@cisco.com>
Bisected-by: David Ahern <daahern@cisco.com>
Tested-by: David Ahern <daahern@cisco.com>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

And a test for it:

[acme@felicio linux]$ perf test
 1: vmlinux symtab matches kallsyms: Ok
 2: detect open syscall event: Ok
 3: detect open syscall event on all cpus: Ok
[acme@felicio linux]$

Translating C the test does:

1. generates different number of open syscalls on each CPU
   by using sched_setaffinity
2. Verifies that the expected number of events is generated
   on each CPU

It works as expected.

LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

on ppc64:
/usr/include/bits/local_lim.h:#define PTHREAD_STACK_MIN	131072

therefore following set of commands:

gives:
perf.2.6.37test: builtin-sched.c:493: create_tasks: Assertion `!(err)' failed.

So make sure we do not set stack size lower than PTHREAD_STACK_MIN.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110110160417.GB2685@psychotron.brq.redhat.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Improve sys_perf_event_open ENOENT return handling in top and record, just
like 5a3446bc does for stat.

Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

For unsupported events (e.g., H/W events when running in a VM)
perf stat currently fails with the error message:

      Error: open_counter returned with 2 (No such file or directory).
    /bin/dmesg may provide additional information.

      Fatal: Not all events could be opened.

dmesg is of no help and it is not clear as to why it fails to
open the counter. This patch changes the error message to

      Error: cache-misses event is not supported.
      Fatal: Not all events could be opened.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: a.p.zijlstra@chello.nl
LPU-Reference: <1294597272-17335-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Bug introduced in ce47dc56.
Reported-by: Mike Galbraith <efault@gmx.de>
Cc: Chris Samuel <chris@csamuel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

Don found that P4 PMU reads CCCR register instead of counter
itself (in attempt to catch unflagged event) this makes P4
NMI handler to consume all NMIs it observes. So the other
NMI users such as kgdb simply have no chance to get NMI
on their hands.

Side note: at moment there is no way to run nmi-watchdog
together with perf tool. This is because both 'perf top' and
nmi-watchdog use same event. So while nmi-watchdog reserves
one event/counter for own needs there is no room for perf tool
left (there is a way to disable nmi-watchdog on boot of course).

Ming has tested this patch with the following results

 | 1. watchdog disabled
 |
 | kgdb tests on boot OK
 | perf works OK
 |
 | 2. watchdog enabled, without patch perf-x86-p4-nmi-4
 |
 | kgdb tests on boot hang
 |
 | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb
 | tests on boot
 |
 | "perf top" partialy works
 |   cpu-cycles            no
 |   instructions          yes
 |   cache-references      no
 |   cache-misses          no
 |   branch-instructions   no
 |   branch-misses         yes
 |   bus-cycles            no
 |
 | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied
 |
 | kgdb tests on boot OK
 | perf does not work, NMI "Dazed and confused" messages show up
 |

Which means we still have problems with p4 box due to 'unknown'
nmi happens but at least it should fix kgdb test cases.
Reported-by: Jason Wessel <jason.wessel@windriver.com>
Reported-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Lin Ming <ming.m.lin@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4D275E7E.3040903@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

On older gcc (3.3) dynamic debug fails to compile:

include/net/inet_connection_sock.h: In function `inet_csk_reset_xmit_timer':
include/net/inet_connection_sock.h:236: error: duplicate label declaration `do_printk'
include/net/inet_connection_sock.h:219: error: this is a previous declaration
include/net/inet_connection_sock.h:236: error: duplicate label declaration `out'
include/net/inet_connection_sock.h:219: error: this is a previous declaration
include/net/inet_connection_sock.h:236: error: duplicate label `do_printk'
include/net/inet_connection_sock.h:236: error: duplicate label `out'

Fix, by reverting the usage of JUMP_LABEL() in dynamic debug for now.

Cc: <stable@kernel.org>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

While running my ftrace stress test, this showed up:

BUG: sleeping function called from invalid context at mm/mmap.c:233
...
note: cat[3293] exited with preempt_count 1

The bug was introduced by commit 91e86e56
("tracing: Fix recursive user stack trace")

Cc: <stable@kernel.org>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4D0089AC.1020802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add __rcu annotation to :
	(struct tracepoint)->funcs
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D22D4F1.50505@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The check for NULL skb in the kfree_skb trace event is a duplicate from the
check already done in its only caller, kfree_skb(). Remove this duplicate check.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20110106175319.GA30610@Krystal>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Zhaolei <zhaolei@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add missing comma within the TRACE_EVENT() example in tracepoint.h.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20110106184532.GA2526@Krystal>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

While doing some developing, Peter Zijlstra and I have found
that if a CREATE_TRACE_POINTS include is done before module.h
is included, it can break the build.

We have been lucky so far that this has not broke the build
since module.h is included in almost everything.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

From the x86_64 low level interrupt handlers, the frame pointer is
saved right after the partial pt_regs frame.

rbp is not supposed to be part of the irq partial saved registers,
but it only requires to extend the pt_regs frame by 8 bytes to
do so, plus a tiny stack offset fixup on irq exit.

This changes a bit the semantics or get_irq_entry() that is supposed
to provide only the value of caller saved registers and the cpu
saved frame. However it's a win for unwinders that can walk through
stack frames on top of get_irq_regs() snapshots.

A noticeable impact is that it makes perf events cpu-clock and
task-clock events based callchains working on x86_64.

Let's then save rbp into the irq pt_regs.

As a result with:

	perf record -e cpu-clock perf bench sched messaging
	perf report --stdio

Before:
    20.94%             perf  [kernel.kallsyms]        [k] lock_acquire
                       |
                       --- lock_acquire
                          |
                          |--44.01%-- __write_nocancel
                          |
                          |--43.18%-- __read
                          |
                          |--6.08%-- fork
                          |          create_worker
                          |
                          |--0.88%-- _dl_fixup
                          |
                          |--0.65%-- do_lookup_x
                          |
                          |--0.53%-- __GI___libc_read
                           --4.67%-- [...]

After:
    19.23%         perf  [kernel.kallsyms]    [k] __lock_acquire
                   |
                   --- __lock_acquire
                      |
                      |--97.74%-- lock_acquire
                      |          |
                      |          |--21.82%-- _raw_spin_lock
                      |          |          |
                      |          |          |--37.26%-- unix_stream_recvmsg
                      |          |          |          sock_aio_read
                      |          |          |          do_sync_read
                      |          |          |          vfs_read
                      |          |          |          sys_read
                      |          |          |          system_call
                      |          |          |          __read
                      |          |          |
                      |          |          |--24.09%-- unix_stream_sendmsg
                      |          |          |          sock_aio_write
                      |          |          |          do_sync_write
                      |          |          |          vfs_write
                      |          |          |          sys_write
                      |          |          |          system_call
                      |          |          |          __write_nocancel

v2: Fix cfi annotations.
Reported-by: Soeren Sandmann Pedersen <sandmann@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jan Beulich <JBeulich@novell.com>

In dump_stack function, bp isn't used anymore, which is introduced by
commit 9c0729dc. This patch removes bp
completely.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Soeren Sandmann <sandmann@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Just re-arrange the code a bit to make it easier to follow what is
going on.  Basically un-negating the if-statement and swapping the code
inside the if-statement with code outside.

No functional changes.
Originally-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In original NMI handler, NMI reason io port (0x61) is only processed
on BSP.  This makes it impossible to hot-remove BSP.  To solve the
issue, a raw spinlock is used to allow the port to be processed on any
CPU.
Originally-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

With priorities in place and no one really understanding the difference between
DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI.

This also simplifies default_do_nmi() a little bit.  Instead of calling the
die_notifier in both the if and else part, just pull it out and call it before
the if-statement.  This has the side benefit of avoiding a call to the ioport
to see if there is an external NMI sitting around until after the (more frequent)
internal NMIs are dealt with.
Patch-Inspired-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In order to consolidate the NMI die_chain events, we need to setup the priorities
for the die notifiers.

I started by defining a bunch of common priorities that can be used by the
notifier blocks.  Then I modified the notifier blocks to use the newly created
priorities.

Now that the priorities are straightened out, it should be easier to remove the
event DIE_NMI_IPI.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

They are a handful of places in the code that register a die_notifier
as a catch all in case no claims the NMI.  Unfortunately, they trigger
on events like DIE_NMI and DIE_NMI_IPI, which depending on when they
registered may collide with other handlers that have the ability to
determine if the NMI is theirs or not.

The function unknown_nmi_error() makes one last effort to walk the
die_chain when no one else has claimed the NMI before spitting out
messages that the NMI is unknown.

This is a better spot for these devices to execute any code without
colliding with the other handlers.

The two drivers modified are only compiled on x86 arches I believe, so
they shouldn't be affected by other arches that may not have
DIE_NMIUNKNOWN defined.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: dann frazier <dannf@hp.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Replace the NMI related magic numbers with symbol constants.

Memory parity error is only valid for IBM PC-AT, newer machine use
bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually
reported via MCE. So corresponding function name and kernel log string
is changed.

But on some machines, PCI SERR line is still used to report memory
errors. This is used by EDAC, so corresponding EDAC call is reserved.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Adds perf_event_time() to try and centralize access to event
timing and in particular ctx->time. Prepares for cgroup support.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Replace all occurrences of:
	event->cpu != -1 && event->cpu == smp_processor_id()
by a call to:
	event_filter_match(event)

This makes the code more consistent and will make the cgroup
patch smaller.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.

Other movements include hoisting some definitions and inlines
at the top of perf_event.c
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It seems that some gcc versions build by default with frame pointers
and some others omit them.

Just build the tools with frame pointers as the callchains can be an
important part of the perf workflow.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1294325513-14276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:

*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....

The tracepoints are separated by comma, something like this:

$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:

    strncat(filename, orgname, strlen(orgname));

This patch fixes it by calling store_event_type() only when the event name has
been found.

LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mm: Initialize initial_page_table before paravirt jumps

Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, asm: Use fxsaveq/fxrestorq in more places

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Add core threshold notification to therm_throt.c

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Use native_halt on a halt, not native_safe_halt

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking, lockdep: Convert sprintf_symbol to %pS

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Better struct irqaction layout

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV, BAU: Extend for more than 16 cpus per socket
  x86, UV: Fix the effect of extra bits in the hub nodeid register
  x86, UV: Add common uv_early_read_mmr() function for reading MMRs

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Check tsc available/disabled in the delayed init function
  x86: Improve TSC calibration using a delayed workqueue
  x86: Make tsc=reliable override boot time stability checks

Merge branch 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  module: Move RO/NX module protection to after ftrace module update
  x86: Resume trampoline must be executable
  x86: Add RO/NX protection for loadable kernel modules
  x86: Add NX protection for kernel data
  x86: Fix improper large page preservation

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, microcode, AMD: Cleanup code a bit
  x86, microcode, AMD: Replace vmalloc+memset with vzalloc

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  apic, amd: Make firmware bug messages more meaningful
  mce, amd: Remove goto in threshold_create_device()
  mce, amd: Add helper functions to setup APIC
  mce, amd: Shorten local variables mci_misc_{hi,lo}
  mce, amd: Implement mce_threshold_block_init() helper function

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix included-by file reference comments
  x86, cpu: Only CPU features determine NX capabilities
  x86, cpu: Call verify_cpu during 32bit CPU startup
  x86, cpu: Clear XD_DISABLED flag on Intel to regain NX
  x86, cpu: Rename verify_cpu_64.S to verify_cpu.S

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
  x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
  x86, acpi: Add MAX_LOCAL_APIC for 32bit
  x86: io_apic: Split setup_ioapic_ids_from_mpc()
  x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage
  x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
  x86: Allow platforms to force enable apic

Merge branch 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cacheinfo: Cleanup L3 cache index disable support
  x86, amd-nb: Cleanup AMD northbridge caching code
  x86, amd-nb: Complete the rename of AMD NB and related code