- 07 Apr, 2011 37 commits
-
-
Johannes Berg authored
My previous patch left a message talking about bootstrap, but that's clearly bogus. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Some new devices and microcode files will a greater variety of features, so the TLV-per-feature approach we took before will quickly make things harder to manage and increase the file size. Add a new TLV that has feature flags. Currently, it will contain: 1) a PAN feature flag, which moves from a separate TLV 2) a new BT stats bit that indicates whether the microcode image uses bluetooth statistics 3) a new MFP flag for management frame protection which can be enabled once the device/microcode supports it Signed-off-by: -
Wey-Yi Guy authored
In alive notify, we should check return code instead of assume everything ok Signed-off-by:
-
Wey-Yi Guy authored
Signed-off-by:
-
Johannes Berg authored
This was used only on 4965 in conjunction with the bootstrap ucode. Signed-off-by:
-
Johannes Berg authored
The ucode restart has to take into account a number of things, like clearing the HCMD_ACTIVE and other status bits, and waking up the wait_command_queue. Currently, however, there are a number of places that neither do that, nor actually set the FW error bit that leads to proper restart handling, which means that in those cases things will probably just hang completely. To clean this up, make all ucode restart go through a single function, except for the cases where it's called during firmware loading. Also fix a bug in wimax coexist restart avoidance, it needs to first clear the status bits (and it has to clear the HCMD_ACTIVE one as well) and then wake up anything waiting on wait_command_queue. Signed-off-by:
-
Johannes Berg authored
Only 4965 had a bootstrap microcode image, so the agn driver can completely ignore that and we can remove some code from it. Signed-off-by:
-
Johannes Berg authored
When we loaded a ucode, there's no point in checking any one that is present, we know which one is supposed to be present so also verify that it is exactly the right one. That also simplifies the code and makes it faster since it doesn't have to check all. Signed-off-by:
-
Johannes Berg authored
The code in iwlcore_verify_inst_sparse really doesn't need to keep track of the number of errors it encountered since a single one is fatal. Also, the code in iwl_verify_inst_full is just used to print out some things, so rename it to iwl_print_inst and don't give it a return code and just make it print out the values. Signed-off-by:
-
Wey-Yi Guy authored
In alive notification call, return the status from iwl_send_calib_results() Signed-off-by:
-
Johannes Berg authored
A number of places just use a variable to return it right away, which is useless, so let's remove the variables there. Signed-off-by:
-
Wey-Yi Guy authored
After driver split, remove unused #defines Signed-off-by:
-
Johannes Berg authored
All agn devices behave the same, so there's no need to go through function pointers for any of the ucode loading functionality. Signed-off-by:
-
Johannes Berg authored
Now that these handlers are no longer shared between 4965 and agn, they can be static. Signed-off-by:
-
Johannes Berg authored
When the driver was split, a bunch of definitions for the 3945 and 4965 devices stayed around, but they're now useless so remove (some of) them. Signed-off-by:
-
Johannes Berg authored
Some code was removed, but a variable it used and that is now unused stayed around, kill it. Signed-off-by:
-
Michal Marek authored
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by:
Michal Marek <mmarek@suse.cz> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Nishant Sarmukadam authored
Instead of configuring tx power unconditionally, check for IEEE80211_CONF_CHANGE_POWER and configure it only when stack sets this flag Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
-
Rajkumar Manoharan authored
Current ath9k code does not handle beacon timers on opmode specific. One such example is that a STA beacon config overwrites already configured AP vif's beacon timers during scan. On multi station vif case, configure beacon timers beased on primary vif selected. This also helps while moving back to single STA vif from multi STA vifs, where the power save is enabled and hw has to be reconfigured with proper beacon and bssid/aid. Otherwise connection poll will be triggered so frequently due to beacon loss. Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
-
Rajkumar Manoharan authored
As of now bssid/aid is overridden with recently changed vif's bss config. This may cause improper beacon updation due to bssid/aid mismatch. On station mode, select an associated sta vif as primary vif and configure that vif's bss into hw. Update the primary vif on interface change and bss info change. Signed-off-by:
-
Rajkumar Manoharan authored
Remove unused bssid from ath_vif and set av_bslot on beacon alloc/return. Signed-off-by:
-
Rajkumar Manoharan authored
The present check denies the IBSS interface addtion if we already have any other vifs. But it fails to deny interface addition if IBSS was already present. Signed-off-by:
-
Jarkko Nikula authored
On Nokia N900 the wl1251 consumes the most power when the interface is up but not associated to access point (that supports PSM). In terms of battery current consumption, the consumption is ~180 mA higher when the interface is up but not associated and only ~5 mA higher when associated compared to interface down and driver not loaded cases. This patch adds support for the mac80211 idle notifications. Chip is put into idle very much the same way when entering into PSM by utilizing the Extreme Low Power (ELP) mode. I.e. idle is entered by setting necessary conditions in wl1251_ps_set_mode followed by a call to wl1251_ps_elp_sleep. It seems it is just enough the authorize ELP mode followed by CMD_DISCONNECT (thanks to Kalle Valo about the idea to use it). Without disconnect command the chip remains somewhat active and stays consuming ~20 mA. Idle mode is left by same way than PSM. The wl1251_join call is used to revert the CMD_DISCONNECT. Without it association to AP doesn't work when trying second time. With this patch the interface up but not associated case the battery current consumption is less than 1 mA higher compared to interface down case. Signed-off-by:
Jarkko Nikula <jhnikula@gmail.com> Acked-by:
Kalle Valo <kvalo@adurom.com> Signed-off-by:
-
Jarkko Nikula authored
RFC for WL1251 idle mode support brought a few issues that are worth to update before adding the idle mode support. Since the idle mode can reuse the code that is now used in Power Save Mode (PSM), the flag psm in struct wl1251 is changed to variable station_mode to be able to distinguish between PSM and idle modes. As the station mode is different than the power power save mode command that is sent to chip, the enum wl1251_cmd_ps_mod values are used only when communicating with the chip and new enum wl1251_station_mode values are used inside the driver. Confusing comment about psm and elp relation is removed since the PSM is actually activated by putting the chip into Entreme Low Power (ELP) mode. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Signed-off-by:
Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by:
-
Jussi Kivilinna authored
With compat-wireless CR* macros in zd_usb.h conflict with CR macros in include/asm-generic/termbits.h. So rename CR* macros to ZD_CR*. Conversion was done with using sed and then 'over 80 character line' checkpatch.pl warnings and comment indents were fixed. Reported-by:
Walter Goldens <goldenstranger@yahoo.com> Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Felix Fietkau authored
Since the beacon timers are global, the individual vif type should not be used to determine the beacon timer configuration mode, use the global opmode instead. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
The recent cleanups in the beacon code fixed SWBA backoff calculation, however it did not remove a line of code that worked around the issues from the earlier version of the code. After the cleanup, the initial TSF based slot calculation now always returns 0 instead of ATH_BCBUF-1, so the previous hack that reversed the slot order needs to be removed, as ad-hoc mode does not use staggered beacons. Signed-off-by:
-
Yogesh Ashok Powar authored
remove MWIFIEX_ENCRYPTION_MODE_ and use WLAN_CIPHER_SUITE_ macros directly Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
When testing wpa_supplicant with 'nl80211' driver to connect to an AP with WPA/WPA2 security, we notice the followings: 1) add_key is called firstly with the key from cfg80211 2) set_defaut_key is called next set_default_key() is specific to WEP keys and should not be called in case of WPA/WPA2 security. The set_default_key() won't be called if wpa_supplicant uses "-Dwext" option, but it's been called if "-Dnl80211" option is specified. We can fix this issue by adding a check to return from set_default_key() if WEP key is not configured. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Marc Yang <yangyang@marvell.com> Signed-off-by:
-
Paul Stewart authored
This allows user-space monitoring of BSS parameters for the associated station. This is useful for debugging and verifying that the paramaters are as expected. [Exactly the same as before but bundled into a single message] Signed-off-by:
Paul Stewart <pstew@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Stanislaw Gruszka authored
We now use priv->mutex to serialize sync command, remove old priv->sync_cmd_mutex and add assertion that priv->mutex must be locked. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
-
Stanislaw Gruszka authored
Check status bits with mutex taken, because when we wait for mutex unlock, status can change. Patch should also make remaining sync commands be send with priv->mutex taken. That will prevent execute these commands when we are currently reset firmware, what could possibly cause troubles. Signed-off-by:
-
Stanislaw Gruszka authored
We mark command as huge by using meta->flags from other (non huge) command, but flags can be possibly overridden, when non huge command is enqueued, what can lead to: WARNING: at lib/dma-debug.c:696 dma_debug_device_change+0x1a3/0x1f0() DMA-API: device driver has pending DMA allocations while released from device [count=1] To fix introduce additional CMD_MAPPED to mark command as mapped and serialize iwl_enqueue_hcmd() with iwl_tx_cmd_complete() using hcmd_lock. Serialization will also fix possible race conditions, because q->read_ptr, q->write_ptr are modified/used in parallel. On the way fix whitespace. Signed-off-by:
-
Xose Vazquez Perez authored
based on the Ralink drivers: W = Windows_ralink_driver L = Linux_ralink_driver USB_IDs W_73 W_2500 L_73 L_2500 ============= ==== ====== ==== ====== 0x050d,0x7050 - - - YES 0x050d,0x705a - - YES - 0x1371,0x9022 - YES YES - 0x148f,0x2573 YES - YES - Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by:
-
-
Christian Lamparter authored
Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
- 05 Apr, 2011 3 commits
-
-
Alexey Dobriyan authored
Convert from strict_strto*() interfaces to kstrto*() interfaces. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
The allocation in mgmt_control() code are in user context and not locked by any spinlock, so it's not recommended the use of GFP_ATOMIC there. Signed-off-by: -
Gustavo F. Padovan authored
spin_lock() and spin_unlock() are more apropiated for user context. Signed-off-by:
-
