Replace with struct vnt_cmd_card_init init_cmd in
device_init_registers.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since typedef enum __device_init_type is only ever called
in one state.

Remove the typedef from main_usb.c:device_init_registers and
replace with macro values. The other values may be needed later.

Apply cold value to sInitCmd.byInitClass.

Remove if braces and correct formatting within.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Again no apparent user of the driver data field.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The lock sequence of dcon_blank_fb(fb_info->lock ---> console_lock) is against
with the one of console_callback(console_lock ---> fb_info->lock), it'll
lead to a potential dead lock, so reorder the lock sequence of dcon_blank_fb
to avoid the potential dead lock.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of the needless __GFP_ZERO flag for kzalloc() at oz_elt_stream_create().
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the following coding style issues:

Lines 84-91,99-106,275,514: Replaced spaces at the start of the lines
with tabs.

Lines 205,271: Inserted spaces after the commas.
Lines 275,1060,1065: Indented the code with tabs instead of spaces.

Line 275: Inserted spaces around '=' and '<', also moved the trailing
statement on the next line.

Line 512: Removed space between function name and open parenthesis.
Line 839: Removed space after '&'.
Line 853: Removed space after '&'.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the following styling issues:

Line 30:
Removed space before open square bracket '['

Lines 31 to 155:
Moved the commas that were in the start of the lines, to the end of the lines.
Inserted spaces after the commas.
Inserted a one tab indentation to each line.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in android/sync.h
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If SERIAL_PORT_DFNS isn't present by platform, it need be defined to
"nothing", like the 8250 serial driver does it.

All related macros also need be removed: IRQF_SHARED is defined in
"linux/interrupt.h", others will be defined when related architecture
has SERIAL_PORT_DFNS.

Or it will cause issue (for arc, with allmodconfig):

    CC [M]  drivers/staging/speakup/serialio.o
  drivers/staging/speakup/serialio.c:12:2: error: initializer element is not constant
    SERIAL_PORT_DFNS
    ^
  drivers/staging/speakup/serialio.c:12:2: error: (near initialization for 'rs_table[0].baud_base')
  drivers/staging/speakup/serialio.c:12:2: error: initializer element is not constant
  drivers/staging/speakup/serialio.c:12:2: error: (near initialization for 'rs_table[1].baud_base')
  drivers/staging/speakup/serialio.c:12:2: error: initializer element is not constant
  drivers/staging/speakup/serialio.c:12:2: error: (near initialization for 'rs_table[2].baud_base')
  drivers/staging/speakup/serialio.c:12:2: error: initializer element is not constant
  drivers/staging/speakup/serialio.c:12:2: error: (near initialization for 'rs_table[3].baud_base')
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes coccinelle error regarding usage of IS_ERR and
PTR_ERR instead of PTR_ERR_OR_ZERO.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If a comedi device is automatically detached by `comedi_auto_unconfig()`
any data buffers associated with subdevices that support asynchronous
commands will be freed.  If the buffer is mmapped at the time, bad
things are likely to happen!  Prevent this by moving some of the buffer
details from `struct comedi_async` into a new, dynamically allocated,
and kref-counted `struct comedi_buf_map`.  This holds a list of pages, a
reference count, and enough information to free the pages.  The new
member `buf_map` of `struct comedi_async` points to a `struct
comedi_buf_map` when the buffer size is non-zero.

Provide a new helper function `comedi_buf_is_mapped()` to check whether
an a buffer is mmapped.  If it is mmapped, the buffer is not allowed to
be resized and the device is not allowed to be manually detached by the
`COMEDI_DEVCONFIG` ioctl.  Provide helper functions
`comedi_buf_map_get()` and `comedi_buf_map_put()` to manipulate the
reference count of the `struct comedi_buf_map`, which will be freed
along with its contents via the 'release' callback of the `kref_put()`
call.  The reference count is manipulated by the vma operations and the
mmap file operation.

Now, when the comedi device is automatically detached, the buffer will
be effectively freed by calling `comedi_buf_alloc()` with a new buffer
size of 0.  That calls local function `__comedi_buf_free()` which calls
`comedi_buf_map_put()` on the `buf_map` member to free it.  It won't
actually be freed until the final 'put'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_read_subdevice()` and `comedi_write_subdevice()` respectively
determine the read and write subdevice to use for a comedi device,
depending on a minor device number passed in.  The comedi device has a
main "board" minor device number and may also have dynamically assigned,
subdevice-specific minor device numbers, in a range of numbers shared by
all comedi devices.  If the minor device number is within the range of
subdevice-specific minor device numbers, both functions call
`comedi_subdevice_from_minor()` to determine what subdevice is
associated with the minor device number (if any) and then check the
subdevice belongs to the comedi device.  Since the subdevice might
belong to a different comedi device, the check is not protected against
the subdevice being freed.  Perform the check in
`comedi_subdevice_from_minor()` instead, where it is protected against
the subdevice being freed.  Make it return `NULL` if the subdevice does
not belong to the device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `comedi_dev_from_minor()` function is no longer used, so remove it.
Calls to it have either been replaced by calls to
`comedi_dev_get_from_minor()` or by using the `private_data` member of
the open file object.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the `struct comedi_device` should now be protected from being
freed while an open file object is using it, use the `private_data`
member of the `struct file` to point to it.  Set it in `comedi_open()`
and use it in the other file operation handlers instead of calling
`comedi_dev_from_minor()` and checking the result.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions in "kcomedilib" need to prevent the comedi device being
detached during their operation.  This can be done by acquiring either
the main mutex or the "attach lock" semaphore in the `struct
comedi_device`.  Use the attach lock when merely checking whether the
device is attached.  Use the mutex when processing a comedi instruction.

Also, don't bother trying to manipulate the module use count of
low-level comedi driver in `comedi_open()` and `comedi_close()`.  If the
device gets detached while it is "open", we wouldn't be able to
decrement the module use count anyway.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Low-level comedi drivers that use the "kcomedilib" module (currently only
the "comedi_bond" driver) call `comedi_open()` to "open" another comedi
device (not as a file) and `comedi_close()` to "close" it.  (Note: these
are the functions exported by the "kcomedilib" module, not the
identically named, statically linked functions in the core "comedi"
module.)

In `comedi_open()`, call `comedi_dev_get_from_minor()` instead of
`comedi_dev_from_minor()` to get the pointer to the `struct
comedi_device` being "opened".  This increments its reference count to
prevent it being freed.  Call `comedi_dev_put()` if `comedi_open()`
returns `NULL`, and also call it from `comedi_close()`.  This decrements
the reference count.

Note that although we now protect against the `struct comedi_device`
being freed, we do not yet protect against it being "detached" while it
is being used.  This will be addressed by a later patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call `comedi_dev_get_from_minor()` instead of `comedi_dev_from_minor()`
in the sysfs attribute handler functions to increment the reference of
the `struct comedi_device` during the operation.  Call
`comedi_dev_put()` to decrement the reference afterwards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the seq_file 'show' handler for "/proc/comedi" - `comedi_read()` in
"comedi/proc.c",  call `comedi_dev_get_from_minor()` instead of
`comedi_dev_from_minor()` to increment the reference counter for the
`struct comedi_device` while it is being examined.  Call
`comedi_dev_put()` to decrement the reference afterwards.  Also acquire
the `attach_lock` rwsem while checking whether the device is attached.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change `comedi_driver_unregister()` to call
`comedi_dev_get_from_minor()` instead of `comedi_dev_from_minor()` when
finding devices using the driver.  This increments the reference count
to prevent the device being removed while it is being checked to see if
it is attached to the driver.  Call `comedi_dev_put()` to decrement the
reference afterwards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the 'open' file operation handler `comedi_open()` in "comedi_fops.c",
call `comedi_dev_get_from_minor()` instead of `comedi_dev_from_minor()`
to get the pointer to the `struct comedi_device`.  This increments the
reference to prevent it being freed.  Call `comedi_dev_put()` to
decrement the reference  on failure, and also call it from the 'release'
file operation handler `comedi_close()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add function `struct comedi_device *comedi_dev_get_from_minor(unsigned
minor)`.  This behaves like the existing `comedi_dev_from_minor()`
except that it also increments the `struct kref refcount` member (via
new helper function `comedi_dev_get()`) to prevent it being freed.  If
it returns a valid pointer, the caller is responsible for calling
`comedi_dev_put()` to decrement the reference count.

Export `comedi_dev_get_from_minor()` and `comedi_dev_put()` as they will
be used by the "kcomedilib" module in addition to the "comedi" module
itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a `struct kref refcount` member to `struct comedi_device` to allow
safe destruction of the comedi device.  Only free the comedi device via
the 'release' callback `kref_put()`.  Currently, nothing calls
`kref_put()`, so the safe destruction is ineffective, but this will be
addressed by later patches.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'read' file operation for comedi devices does not use the main mutex
in the `struct comedi_device` to avoid contention with some ioctls that
may take a while to complete.  Use the `attach_lock` semaphore to
protect against detachment while the 'read' operation is in progress.
This is a `struct rw_semaphore` and we read-lock it to protect against
device detachment.

Note that `comedi_device_cancel_all()` is called during device
detachment, which cancels any ongoing asynchronous commands.  This will
wake up any blocked readers which will then release the `attach_lock`
semaphore and complete the 'read' operation early.

The only time the 'read' file operation does use the main mutex is at
the end of the command when it has to call `do_become_nonbusy()` to mark
the subdevice as no longer busy handling an asynchronous command.  To
avoid deadlock, it has to remove the task from the wait queue and
release the `attach_lock` semaphore before acquiring the main mutex.  It
then needs to confirm the device is still attached.  Unfortunately, we
do not yet protect against a dynamically allocated `struct
comedi_device` being deleted during the operation.  This will be
addressed by a later patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'write' file operation for comedi devices does not use the main
mutex in the `struct comedi_device` to avoid contention with some ioctls
that may take a while to complete.  Use the `attach_lock` semaphore to
protect against detachment while the 'write' operation is in progress.
This is a `struct rw_semaphore` and we read-lock it to protect against
device detachment.

Note that `comedi_device_cancel_all()` is called during device
detachment, which cancels any ongoing asynchronous commands.  This will
wake up any blocked writers which will then release the `attach_lock`
semaphore and complete the 'write' operation early.

The only time the 'write' file operation does use the main mutex is at
the end of the command when it has to call `do_become_nonbusy()` to mark
the subdevice as no longer busy handling an asynchronous command.  To
avoid deadlock, it has to remove the task from the wait queue and
release the `attach_lock` semaphore before acquiring the main mutex.  It
then needs to confirm that the device is still attached.  Unfortunately,
we do not yet protect against a dynamically allocated `struct
comedi_device` being deleted during the operation.  This will be
addressed by a later patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a member `detach_count` to `struct comedi_device` that is
incremented every time the device gets detached.  This will be used in
some validity checks in the 'read' and 'write' file operations to make
sure the attachment remains valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core module's handling of the `COMEDI_DEVCONFIG` ioctl will
not allow a device to be detached if it is busy.  However, comedi
devices can also be auto-detached due to a removal of a hardware device.
One of the things we should do in that case is cancel any asynchronous
commands that are running.  Add a new function
`comedi_device_cancel_all()` to do that and call it from
`comedi_device_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Wake up all waiters on the comedi subdevice's async wait queue whenever
the subdevice is marked "non-busy".  This happens when an asynchronous
command is cancelled or when a command is terminated and all data has
been read or written.  Note: use `wake_up_interruptible_all()` as we
only use interruptible waits.

Remove the call to `wake_up_interruptible()` from `do_cancel_ioctl()` as
it will call `wake_up_interruptible_all()` indirectly via `do_cancel()`
and `do_become_nonbusy()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local function `cleanup_device()` to
`comedi_device_detach_cleanup()`.  It is only called from the
`comedi_device_detach()` function and that is called from
`comedi_device_cleanup()` and other places.  The more specific function
name seems less confusing.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Acquire the `attach_lock` semaphore in the `struct comedi_device` while
modifying the `attached` flag.  This is a "write" acquire.  Note that
the main mutex in the `struct comedi_device` is also held at this time.
Tasks wishing to check the device is attached will need to either
acquire the main mutex, or "read" acquire the `attach_lock` semaphore,
or both in that order.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'read' and 'write' file operations on comedi devices do not use the
main mutex in the `struct comedi_device` to avoid contention with ioctls
that may take a while to complete.  However, it is necessary to protect
against the device being detached while the operation is in progress.
Add member `struct rw_semaphore attach_lock` to `struct comedi_device`
for this purpose and initialize it on creation.

The actual locking and unlocking will be implemented by subsequent
patches.  Tasks that are attaching or detaching comedi devices will
write-acquire the new semaphore whilst also holding the main mutex in
the `struct comedi_device`.  Tasks that wish to protect against the
comedi device being detached need to acquire either the main mutex, or
read-acquire the new semaphore, or both in that order.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Two structures defined in "comedidev.h" have an element of type
`spinlock_t`, so add `#include <linux/spinlock_types.h>` to declare it.
One structure has an element of type `struct mutex` so add `#include
<linux/mutex.h>` to declare it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'kcomedilib' module used to provide functions to allow asynchronous
comedi commands to be set up from another kernel module, but now
commands can only be set up by ioctls from user space via the core
comedi module.  Since support for commands initiated from kernel space
has been dropped, the `cb_func` and `cb_arg` members of `struct
comedi_async` are never set (although the `cb_mask` member is still used
to mask comedi events).  The `SRF_USER` bit of the comedi subdevice
runflags is no longer needed to distinguish commands from user and
kernel space since they only come from user space.

Don't bother setting or testing the `SRF_USER` flag, and get rid of it,
along with the `cb_func` and `cb_arg` members.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following sparse warning:
drivers/staging/lustre/lustre/llite/llite_internal.h:461:49: error:dubious one-bit signed bitfield
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following sparse warnings generated by AND-ing FMODE_* constant
with a normal integer.

drivers/staging/lustre/lustre/llite/file.c:102:32: warning: restricted
fmode_t degrades to integer
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following sparse warings in local_storage.c.
drivers/staging/lustre/lustre/obdclass/local_storage.c:269:16:warning:incorrect type in assignment (different base types)
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes an extra newline character in pmgr/dmm.c.
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes confusing macro gdm_lte_sdu_send as stated in TODO list
in file gdm_lte.c. It then fixes the place where the macro is used.
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function dgrp_receive() in dgrp_net_ops.c is too long and can be
refactored. It uses various switch statements and goto labels. I have
removed a label called data and tried to extract a new function out of
it called as handle_data_in_packet().

This helps to make the code more modularize and simple to read and
understand.
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the following warning reported by checkpatch.pl

WARNING: line over 80 characters
drivers/staging/media/lirc/lirc_imon.c
Signed-off-by: Matina Maria Trompouki <mtrompou@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the following warning reported by checkpatch.pl

WARNING: quoted string split across lines

drivers/staging/media/lirc/lirc_igorplugusb.c
drivers/staging/media/lirc/lirc_imon.c
drivers/staging/media/lirc/lirc_serial.c
drivers/staging/media/lirc/lirc_zilog.c
Signed-off-by: Matina Maria Trompouki <mtrompou@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>