Add Wenjia as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 8fffa0e3 ("selftests/bpf: Normalize XDP section names in
selftests") the xdp_dummy.o's section name has changed to xdp. But some
tests are still using "section xdp_dummy", which make the tests failed.
Fix them by updating to the new section name.

Fixes: 8fffa0e3 ("selftests/bpf: Normalize XDP section names in selftests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2022-07-02

We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).

The main changes are:

1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.

2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.

3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.

4) General BPF maintainer entry revamp to better scale patch reviews.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, selftests: Add verifier test case for jmp32's jeq/jne
  bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
  bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
  bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
  xsk: Clear page contiguity bit when unmapping pool
  bpf, docs: Better scale maintenance of BPF subsystem
  fprobe, samples: Add module parameter descriptions
====================

Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a test case to trigger the verifier's incorrect conclusion in the
case of jmp32's jeq/jne. Also here, make use of dead code elimination,
so that we can see the verifier bailing out on unfixed kernels.

Before:

  # ./test_verifier 724
  #724/p jeq32/jne32: bounds checking FAIL
  Failed to load prog 'Permission denied'!
  R4 !read_ok
  verification time 8 usec
  stack depth 0
  processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
  Summary: 0 PASSED, 0 SKIPPED, 1 FAILED

After:

  # ./test_verifier 724
  #724/p jeq32/jne32: bounds checking OK
  Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net

Add a test case to trigger the constant scalar issue which leaves the
register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make
use of dead code elimination, so that we can see the verifier bailing
out on unfixed kernels. For the condition, we use jle given it checks
on umax bound.

Before:

  # ./test_verifier 743
  #743/p jump & dead code elimination FAIL
  Failed to load prog 'Permission denied'!
  R4 !read_ok
  verification time 11 usec
  stack depth 0
  processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
  Summary: 0 PASSED, 0 SKIPPED, 1 FAILED

After:

  # ./test_verifier 743
  #743/p jump & dead code elimination OK
  Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net

Kuee reported a corner case where the tnum becomes constant after the call
to __reg_bound_offset(), but the register's bounds are not, that is, its
min bounds are still not equal to the register's max bounds.

This in turn allows to leak pointers through turning a pointer register as
is into an unknown scalar via adjust_ptr_min_max_vals().

Before:

  func#0 @0
  0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
  0: (b7) r0 = 1                        ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
  1: (b7) r3 = 0                        ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
  2: (87) r3 = -r3                      ; R3_w=scalar()
  3: (87) r3 = -r3                      ; R3_w=scalar()
  4: (47) r3 |= 32767                   ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
  5: (75) if r3 s>= 0x0 goto pc+1       ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
  6: (95) exit

  from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
  7: (d5) if r3 s<= 0x8000 goto pc+1    ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
  8: (95) exit

  from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
  9: (07) r3 += -32767                  ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0))  <--- [*]
  10: (95) exit

What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff;
0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that
is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has
not been done at that point via __update_reg_bounds(), which would have improved
the umax to be equal to umin.

Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync()
helper and use it consistently everywhere. After the fix, bounds have been
corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register
is regarded as a 'proper' constant scalar of 0.

After:

  func#0 @0
  0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
  0: (b7) r0 = 1                        ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
  1: (b7) r3 = 0                        ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
  2: (87) r3 = -r3                      ; R3_w=scalar()
  3: (87) r3 = -r3                      ; R3_w=scalar()
  4: (47) r3 |= 32767                   ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
  5: (75) if r3 s>= 0x0 goto pc+1       ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
  6: (95) exit

  from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
  7: (d5) if r3 s<= 0x8000 goto pc+1    ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
  8: (95) exit

  from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
  9: (07) r3 += -32767                  ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))  <--- [*]
  10: (95) exit

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-2-daniel@iogearbox.net

Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the
register value does not match expectations for the fall-through path. For
example:

Before fix:

  0: R1=ctx(off=0,imm=0) R10=fp0
  0: (b7) r2 = 0                        ; R2_w=P0
  1: (b7) r6 = 563                      ; R6_w=P563
  2: (87) r2 = -r2                      ; R2_w=Pscalar()
  3: (87) r2 = -r2                      ; R2_w=Pscalar()
  4: (4c) w2 |= w6                      ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563
  5: (56) if w2 != 0x8 goto pc+1        ; R2_w=P571  <--- [*]
  6: (95) exit
  R0 !read_ok

After fix:

  0: R1=ctx(off=0,imm=0) R10=fp0
  0: (b7) r2 = 0                        ; R2_w=P0
  1: (b7) r6 = 563                      ; R6_w=P563
  2: (87) r2 = -r2                      ; R2_w=Pscalar()
  3: (87) r2 = -r2                      ; R2_w=Pscalar()
  4: (4c) w2 |= w6                      ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563
  5: (56) if w2 != 0x8 goto pc+1        ; R2_w=P8  <--- [*]
  6: (95) exit
  R0 !read_ok

As can be seen on line 5 for the branch fall-through path in R2 [*] is that
given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as
upper 32 bit are known to be zero. However, verifier incorrectly concludes
that r2 = 571 which is far off.

The problem is it only marks false{true}_reg as known in the switch for JE/NE
case, but at the end of the function, it uses {false,true}_{64,32}off to
update {false,true}_reg->var_off and they still hold the prior value of
{false,true}_reg->var_off before it got marked as known. The subsequent
__reg_combine_32_into_64() then propagates this old var_off and derives new
bounds. The information between min/max bounds on {false,true}_reg from
setting the register to known const combined with the {false,true}_reg->var_off
based on the old information then derives wrong register data.

Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant
{false,true}_{64,32}off tnums along with the register marking to known
constant.

Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-1-daniel@iogearbox.net

Remove the repeated ';' from code.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-30

This series contains updates to i40e driver only.

Lukasz adds reporting of packets dropped for being too large into the Rx
dropped statistics.

Norbert clears VF filter and MAC address to resolve issue with older VFs
being unable to change their MAC address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - new code bugs:

   - clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()

   - mptcp:
      - invoke MP_FAIL response only when needed
      - fix shutdown vs fallback race
      - consistent map handling on failure

   - octeon_ep: use bitwise AND

  Previous releases - regressions:

   - tipc: move bc link creation back to tipc_node_create, fix NPD

  Previous releases - always broken:

   - tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
     buffered skbs from keeping refcount on the conntrack module

   - ipv6: take care of disable_policy when restoring routes

   - tun: make sure to always disable and unlink NAPI instances

   - phy: don't trigger state machine while in suspend

   - netfilter: nf_tables: avoid skb access on nf_stolen

   - asix: fix "can't send until first packet is send" issue

   - usb: asix: do not force pause frames support

   - nxp-nci: don't issue a zero length i2c_master_read()

  Misc:

   - ncsi: allow use of proper "mellanox" DT vendor prefix

   - act_api: add a message for user space if any actions were already
     flushed before the error was hit"

* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
  net: dsa: felix: fix race between reading PSFP stats and port stats
  selftest: tun: add test for NAPI dismantle
  net: tun: avoid disabling NAPI twice
  net: sparx5: mdb add/del handle non-sparx5 devices
  net: sfp: fix memory leak in sfp_probe()
  mlxsw: spectrum_router: Fix rollback in tunnel next hop init
  net: rose: fix UAF bugs caused by timer handler
  net: usb: ax88179_178a: Fix packet receiving
  net: bonding: fix use-after-free after 802.3ad slave unbind
  ipv6: fix lockdep splat in in6_dump_addrs()
  net: phy: ax88772a: fix lost pause advertisement configuration
  net: phy: Don't trigger state machine while in suspend
  usbnet: fix memory allocation in helpers
  selftests net: fix kselftest net fatal error
  NFC: nxp-nci: don't print header length mismatch on i2c error
  NFC: nxp-nci: Don't issue a zero length i2c_master_read()
  net: tipc: fix possible refcount leak in tipc_sk_create()
  nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
  net: ipv6: unexport __init-annotated seg6_hmac_net_init()
  ipv6/sit: fix ipip6_tunnel_get_prl return value
  ...

A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.

Before commit 5dae222a ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems.  After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.

Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.

Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().

This patch restores some cross-filesystem copy restrictions that existed
prior to commit 5dae222a ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().

Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user.  Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e.  nfsv3).

Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb.  This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().

nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.

fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.

Fixes: 5dae222a ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: 64bf5ff5 ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clear VF MAC from parent PF and remove VF filter from VSI when both
conditions are true:
-VIRTCHNL_VF_OFFLOAD_USO is not used
-VM MAC was not set from PF level

It affects older version of IAVF and it allow them to change MAC
Address on VM, newer IAVF won't change their behaviour.

Previously it wasn't possible to change VF's MAC Address on VM
because there is flag on IAVF driver that won't allow to
change MAC Address if this address is given from PF driver.

Fixes: 155f0ac2 ("iavf: allow permanent MAC address to change")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.

Fix it by reading GL_RXERR1 register for each interface.

Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"

Fixes: 41a9e55c ("i40e: add missing VSI statistics")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].

It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.

So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.

Fixes: 7d4b564d ("net: dsa: felix: support psfp filter on vsc9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Being lazy does not pay, add the test for various
ordering of tun queue close / detach / destroy.

Link: https://lore.kernel.org/r/20220629181911.372047-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.

Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.

Fixes: a8fc8cb5 ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When adding/deleting mdb entries on other net_devices, eg., tap
interfaces, it should not crash.

Fixes: 3bacfccd ("net: sparx5: Add mdb handlers")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull rdma fixes from Jason Gunthorpe:
 "Three minor bug fixes:

   - qedr not setting the QP timeout properly toward userspace

   - Memory leak on error path in ib_cm

   - Divide by 0 in RDMA interrupt moderation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  linux/dim: Fix divide by 0 in RDMA DIM
  RDMA/cm: Fix memory leak in ib_cm_insert_listen
  RDMA/qedr: Fix reporting QP timeout attribute

Pull fanotify fix from Jan Kara:
 "A fix for recently added fanotify API to have stricter checks and
  refuse some invalid flag combinations to make our life easier in the
  future"

* tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: refine the validation checks on non-dir inode mask

Pull crypto fix from Herbert Xu:
 "Fix a regression that breaks the ccp driver"

* tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ccp - Fix device IRQ counting by using platform_irq_count()

sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.

We should use devm_add_action_or_reset() instead of devm_add_action().
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.

A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.

Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.

Fixes: dbe4598c ("mlxsw: spectrum_router: Keep nexthops in a linked list")
Fixes: a5390278 ("mlxsw: spectrum: Add support for setting counters on nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry()
and rose_idletimer_expiry(). The root cause is that del_timer()
could not stop the timer handler that is running and the refcount
of sock is not managed properly.

One of the UAF bugs is shown below:

    (thread 1)          |        (thread 2)
                        |  rose_bind
                        |  rose_connect
                        |    rose_start_heartbeat
rose_release            |    (wait a time)
  case ROSE_STATE_0     |
  rose_destroy_socket   |  rose_heartbeat_expiry
    rose_stop_heartbeat |
    sock_put(sk)        |    ...
  sock_put(sk) // FREE  |
                        |    bh_lock_sock(sk) // USE

The sock is deallocated by sock_put() in rose_release() and
then used by bh_lock_sock() in rose_heartbeat_expiry().

Although rose_destroy_socket() calls rose_stop_heartbeat(),
it could not stop the timer that is running.

The KASAN report triggered by POC is shown below:

BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110
Write of size 4 at addr ffff88800ae59098 by task swapper/3/0
...
Call Trace:
 <IRQ>
 dump_stack_lvl+0xbf/0xee
 print_address_description+0x7b/0x440
 print_report+0x101/0x230
 ? irq_work_single+0xbb/0x140
 ? _raw_spin_lock+0x5a/0x110
 kasan_report+0xed/0x120
 ? _raw_spin_lock+0x5a/0x110
 kasan_check_range+0x2bd/0x2e0
 _raw_spin_lock+0x5a/0x110
 rose_heartbeat_expiry+0x39/0x370
 ? rose_start_heartbeat+0xb0/0xb0
 call_timer_fn+0x2d/0x1c0
 ? rose_start_heartbeat+0xb0/0xb0
 expire_timers+0x1f3/0x320
 __run_timers+0x3ff/0x4d0
 run_timer_softirq+0x41/0x80
 __do_softirq+0x233/0x544
 irq_exit_rcu+0x41/0xa0
 sysvec_apic_timer_interrupt+0x8c/0xb0
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x1b/0x20
RIP: 0010:default_idle+0xb/0x10
RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202
RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae
RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180
RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46
R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000
R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000
...
Allocated by task 146:
 __kasan_kmalloc+0xc4/0xf0
 sk_prot_alloc+0xdd/0x1a0
 sk_alloc+0x2d/0x4e0
 rose_create+0x7b/0x330
 __sock_create+0x2dd/0x640
 __sys_socket+0xc7/0x270
 __x64_sys_socket+0x71/0x80
 do_syscall_64+0x43/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 152:
 kasan_set_track+0x4c/0x70
 kasan_set_free_info+0x1f/0x40
 ____kasan_slab_free+0x124/0x190
 kfree+0xd3/0x270
 __sk_destruct+0x314/0x460
 rose_release+0x2fa/0x3b0
 sock_close+0xcb/0x230
 __fput+0x2d9/0x650
 task_work_run+0xd6/0x160
 exit_to_user_mode_loop+0xc7/0xd0
 exit_to_user_mode_prepare+0x4e/0x80
 syscall_exit_to_user_mode+0x20/0x40
 do_syscall_64+0x4f/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

This patch adds refcount of sock when we use functions
such as rose_start_heartbeat() and so on to start timer,
and decreases the refcount of sock when timer is finished
or deleted by functions such as rose_stop_heartbeat()
and so on. As a result, the UAF bugs could be mitigated.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This patch corrects packet receiving in ax88179_rx_fixup.

- problem observed:
  ifconfig shows allways a lot of 'RX Errors' while packets
  are received normally.

  This occurs because ax88179_rx_fixup does not recognise properly
  the usb urb received.
  The packets are normally processed and at the end, the code exits
  with 'return 0', generating RX Errors.
  (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
   another packet there)

  This is a usb urb received by "tcpdump -i usbmon2 -X" on a
  little-endian CPU:
  0x0000:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
           ^         packet 1 start (pkt_len = 0x05ec)
           ^^^^      IP alignment pseudo header
                ^    ethernet packet start
           last byte ethernet packet   v
           padding (8-bytes aligned)     vvvv vvvv
  0x05e0:  c92d d444 1420 8a69 83dd 272f e82b 9811
  0x05f0:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
  ...      ^ packet 2
  0x0be0:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
  ...
  0x1130:  9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
  ...
  0x1720:  8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
  ...
  0x1d10:  ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
  ...
  0x2070:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
  ...      ^ packet 7
  0x2120:  7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
  0x2130:  f032 e093 7489 0740 3008 ec05 0000 0080
                               ====1==== ====2====
           hdr_off             ^
           pkt_len = 0x05ec         ^^^^
           AX_RXHDR_*=0x00830  ^^^^   ^
           pkt_len = 0                        ^^^^
           AX_RXHDR_DROP_ERR=0x80000000  ^^^^   ^
  0x2140:  3008 ec05 0000 0080 3008 5805 0000 0080
  0x2150:  3008 ec05 0000 0080 3008 ec05 0000 0080
  0x2160:  3008 5803 0000 0080 3008 c800 0000 0080
           ===11==== ===12==== ===13==== ===14====
  0x2170:  0000 0000 0e00 3821
                     ^^^^ ^^^^ rx_hdr
                     ^^^^      pkt_cnt=14
                          ^^^^ hdr_off=0x2138
           ^^^^ ^^^^           padding

  The dump shows that pkt_cnt is the number of entrys in the
  per-packet metadata. It is "2 * packet count".
  Each packet have two entrys. The first have a valid
  value (pkt_len and AX_RXHDR_*) and the second have a
  dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
  Why exists dummy-header for each packet?!?
  My guess is that this was done probably to align the
  entry for each packet to 64-bits and maintain compatibility
  with old firmware.
  There is also a padding (0x00000000) before the rx_hdr to
  align the end of rx_hdr to 64-bit.
  Note that packets have a alignment of 64-bits (8-bytes).

  This patch assumes that the dummy-header and the last
  padding are optional. So it preserves semantics and
  recognises the same valid packets as the current code.

  This patch was made using only the dumpfile information and
  tested with only one device:
  0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet

Fixes: 57bc3d3a ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup")
Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

commit 0622cab0 ("bonding: fix 802.3ad aggregator reselection"),
resolve case, when there is several aggregation groups in the same bond.
bond_3ad_unbind_slave will invalidate (clear) aggregator when
__agg_active_ports return zero. So, ad_clear_agg can be executed even, when
num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for,
previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave
will not update slave ports list, because lag_ports==NULL. So, here we
got slave ports, pointing to freed aggregator memory.

Fix with checking actual number of ports in group (as was before
commit 0622cab0 ("bonding: fix 802.3ad aggregator reselection") ),
before ad_clear_agg().

The KASAN logs are as follows:

[  767.617392] ==================================================================
[  767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470
[  767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767
[  767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G           O 5.15.11 #15
[  767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT)
[  767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler
[  767.666468] Call trace:
[  767.668930]  dump_backtrace+0x0/0x2d0
[  767.672625]  show_stack+0x24/0x30
[  767.675965]  dump_stack_lvl+0x68/0x84
[  767.679659]  print_address_description.constprop.0+0x74/0x2b8
[  767.685451]  kasan_report+0x1f0/0x260
[  767.689148]  __asan_load2+0x94/0xd0
[  767.692667]  bond_3ad_state_machine_handler+0x13dc/0x1470

Fixes: 0622cab0 ("bonding: fix 802.3ad aggregator reselection")
Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.

WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted

net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
 #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223

stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
 netlink_dump_start include/linux/netlink.h:245 [inline]
 rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:734
 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546
 __sys_sendmsg net/socket.c:2575 [inline]
 __do_sys_sendmsg net/socket.c:2584 [inline]
 __se_sys_sendmsg net/socket.c:2582 [inline]
 __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 88e2ca30 ("mld: convert ifmcaddr6 to RCU")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case of asix_ax88772a_link_change_notify() workaround, we run soft
reset which will automatically clear MII_ADVERTISE configuration. The
PHYlib framework do not know about changed configuration state of the
PHY, so we need use phy_init_hw() to reinit PHY configuration.

Fixes: dde25846 ("net: usb/phy: asix: add support for ax88772A/C PHYs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:

They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase.  Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().

Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended:  Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.

Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended.  Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source.  (Those conditions are
identical to mdio_bus_phy_may_suspend().)  Postpone handling of the
interrupt until the PHY has resumed.

Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion.  That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.

Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.

The issue was exposed by commit 1ce8b372 ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.

Fixes: 541cd3ee ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

usbnet provides some helper functions that are also used in
the context of reset() operations. During a reset the other
drivers on a device are unable to operate. As that can be block
drivers, a driver for another interface cannot use paging
in its memory allocations without risking a deadlock.
Use GFP_NOIO in the helpers.

Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The incorrect path is causing the following error when trying to run net
kselftests:

In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
         ^~~~~~~~~~~~~~~~~~~
1 error generated.

Fixes: cf67838c ("selftests net: fix bpf build error")
Signed-off-by: Coleman Dietsch <dietschc@csp.edu>
Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.eduSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Restore set counter when one of the CPU loses race to add elements
   to sets.

2) After NF_STOLEN, skb might be there no more, update nftables trace
   infra to avoid access to skb in this case. From Florian Westphal.

3) nftables bridge might register a prerouting hook with zero priority,
   br_netfilter incorrectly skips it. Also from Florian.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: br_netfilter: do not skip all hooks with 0 priority
  netfilter: nf_tables: avoid skb access on nf_stolen
  netfilter: nft_dynset: restore set element counter when failing to update
====================

Link: https://lore.kernel.org/r/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes

 - panasonic-laptop: missing hotkey presses regression fix

 - some hardware-id additions

 - some other small fixes

* tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: hp-wmi: Ignore Sanitization Mode event
  platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
  platform/x86: thinkpad-acpi: profile capabilities as integer
  platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
  platform/x86: panasonic-laptop: don't report duplicate brightness key-presses
  platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"
  platform/x86: panasonic-laptop: sort includes alphabetically
  platform/x86: panasonic-laptop: de-obfuscate button codes
  ACPI: video: Change how we determine if brightness key-presses are handled
  platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
  platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter
  platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
  platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
  platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver

Pull ksmbd server fixes from Steve French:

 - seek null check (don't use f_seek op directly and blindly)

 - offset validation in FSCTL_SET_ZERO_DATA

 - fallocate fix (relates e.g. to xfstests generic/091 and 263)

 - two cleanup fixes

 - fix socket settings on some arch

* tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use vfs_llseek instead of dereferencing NULL
  ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA
  ksmbd: set the range of bytes to zero without extending file size in FSCTL_ZERO_DATA
  ksmbd: remove duplicate flag set in smb2_write
  ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is already used
  ksmbd: use SOCK_NONBLOCK type for kernel_accept()

Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.

Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Free sk in case tipc_sk_insert() fails.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Reported-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Fixes: caf6e49b ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627124048.296253-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As of commit 5801f064 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"),
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

This remove the EXPORT_SYMBOL to fix modpost warning:

WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init()
The symbol seg6_hmac_net_init is exported and annotated __init
Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export.

Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM.
Move the position of label "out" to return correctly.

Addresses-Coverity: ("Unused value")
Fixes: 300aaeea ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.")
Signed-off-by: katrinzhou <katrinzhou@tencent.com>
Reviewed-by: Eric Dumazet<edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Fixes for 5.19

Several categories of fixes from the mptcp tree:

Patches 1-3 are fixes related to MP_FAIL and FASTCLOSE, to make sure
MIBs are accurate, and to handle MP_FAIL transmission and responses at
the correct times. sk_timer conflicts are also resolved.

Patches 4 and 6 handle two separate race conditions, one at socket
shutdown and one with unaccepted subflows.

Patch 5 makes sure read operations are not blocked during fallback to
TCP.

Patch 7 improves the diag selftest, which were incorrectly failing on
slow machines (like the VMs used for CI testing).

Patch 8 avoids possible symbol redefinition errors in the userspace
mptcp.h file.

Patch 9 fixes a selftest build issue with gcc 12.
====================

Link: https://lore.kernel.org/r/20220628010243.166605-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>