- 18 Aug, 2013 40 commits
-
-
Andrzej Hajda authored
Resolution set on ISP pad of S5C73M3-OIF subdev should be propagated to source pad for TRY and ACTIVE formats. The patch adds missing propagation for TRY format. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sylwester Nawrocki authored
This fixes regression introduced in commit b426b3a6 [media] V4L: Merge struct v4l2_async_subdev_list with struct v4l2_subdev Signed-off-by:
-
Guennadi Liakhovetski authored
Convert the mt9m111 driver to asynchronous subdevice probing. Synchronous probing is also still possible. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
The mt9t031 driver hasn't yet been updated to support asynchronous subdevice probing. If such a probing is attempted, the driver is allowed to fail, but it shouldn't Oops. This patch fixes such a potential NULL pointer dereference. Signed-off-by:
-
Guennadi Liakhovetski authored
The soc-camera core does all the work on supporting asynchronous subdevice probing, host drivers only have to pass a subdevice list to soc-camera. Typically this list is provided by the platform. Signed-off-by:
-
Guennadi Liakhovetski authored
V4L2_MBUS_FMT_* codes are defined in v4l2-mediabus.h as hexadecimal constants. Print them in the same form for easier recognition. Signed-off-by:
-
Guennadi Liakhovetski authored
Use devm_* resource allocators to simplify the driver's probe and clean up paths. Signed-off-by:
-
Guennadi Liakhovetski authored
With synchronous subdevice probing regulators should be requested by the soc-camera core in soc_camera_pdrv_probe(). Subdevice drivers, supporting asynchronous probing, call soc_camera_power_init() to request regulators. Erroneously, the same regulator array is used in the latter case as in the former, which leads to a failure. This patch fixes it by preventing the second regulator request from being executed. Signed-off-by:
-
Hans Verkuil authored
media_build/v4l/soc_camera.c: In function 'soc_camera_host_register': media_build/v4l/soc_camera.c:1513:10: warning: 'sasd' may be used uninitialized in this function [-Wmaybe-uninitialized] snprintf(clk_name, sizeof(clk_name), "%d-%04x", ^ media_build/v4l/soc_camera.c:1464:34: note: 'sasd' was declared here struct soc_camera_async_subdev *sasd; ^ By changing the type of 'i' to unsigned and changing a condition we finally convince the compiler that sasd is really initialized. Signed-off-by:Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Vladimir Barinov authored
Add Renesas R-Car VIN (Video In) V4L2 driver. Based on the patch by Phil Edworthy <phil.edworthy@renesas.com>. [Sergei: removed deprecated IRQF_DISABLED flag, reordered/renamed 'enum chip_id' values, reordered rcar_vin_id_table[] entries, removed senseless parens from to_buf_list() macro, used ALIGN() macro in rcar_vin_setup(), added {} to the *if* statement and used 'bool' values instead of 0/1 where necessary, removed unused macros, done some reformatting and clarified some comments.] Signed-off-by:Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Laurent Pinchart authored
Calling v4l2_async_notifier_unregister() on a notifier that hasn't been registered leads to a crash. To simplify drivers, make it safe to unregister a notifier that has not been registered. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Laurent Pinchart authored
The sample code erroneously scales the y1, pb and pr variables from the [0.0 .. 1.0] and [-0.5 .. 0.5] ranges to [0 .. 255] and [-128 .. 127]. Fix it. Signed-off-by:
-
Laurent Pinchart authored
The of_get_child_by_name() function takes a reference to the node it returns. Make sure to drop it when looking for the ports node in v4l2_of_get_next_endpoint(). Signed-off-by:
-
Laurent Pinchart authored
Replace a manual loop through child nodes with a call to of_get_child_by_name(). Signed-off-by:
-
Laurent Pinchart authored
For output buffers application provide to the kernel the number of bytes they stored in each plane of the buffer. Verify that the value is smaller than or equal to the plane length. Signed-off-by:
Pawel Osciak <pawel@osciak.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
changeset 2ccf12af did a crappy job when added multi-line comment lines, violating CodingStyle. Change the comments added there to fulfill CodingStyle, and document the platform_data using Documentation/kernel-doc-nano-HOWTO.txt. Cc: Jon Arne Jørgensen <jonarne@jonarne.no> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jon Arne Jørgensen authored
This patch implements i2c_board_info.platform_data, and some options to override the default initialization table for the GM7113C and SAA7113 chips. Signed-off-by:
Jon Arne Jørgensen <jonarne@jonarne.no> Signed-off-by:
-
Jon Arne Jørgensen authored
Most of the registers changed in saa7115_init_misc table are out of range for the gm7113c chip. The only register that's within range, don't need to be changed here. Signed-off-by:
-
Jon Arne Jørgensen authored
saa711x_set_v4lstd would toggle several bits that should not be touched when changing std. This patch fixes this. Signed-off-by:
-
Hans Verkuil authored
Simplify the code by using the new dv_timings helpers. Signed-off-by:
-
Hans Verkuil authored
Use the new blanking and frame size defines. This also fixed a bug in these drivers: they assumed that the height for interlaced formats was the field height, however height is the frame height. So the height for a field is actually bt->height / 2. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Use the new defines to calculate the full blanking and frame sizes. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Acked-by:
-
Hans Verkuil authored
It is very common to have to calculate the total width and height of the blanking and the full frame, so add a few defines that deal with that. Signed-off-by:
-
Hans Verkuil authored
Clarify that the il_vfrontporch, il_vsync and il_vbackporch fields must always be 0 for progressive formats. Signed-off-by:
-
Hans Verkuil authored
v4l2-common.c contained a bunch of dv-timings related functions. Move that to the new v4l2-dv-timings.c which is a more appropriate place for them. There aren't many drivers that do HDTV, so it is a good idea to separate common code related to that into a module of its own. Signed-off-by:
-
Hans Verkuil authored
This module makes it easy to filter valid timings from the full list of CEA and DMT timings based on the timings capabilities. Signed-off-by:
-
Hans Verkuil authored
This particular DMT timing definition was duplicated in the header. Signed-off-by:
-
Ondrej Zary authored
Move tea575x from sound/i2c/other to drivers/media/radio Includes Kconfig changes by Hans Verkuil. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ondrej Zary authored
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it. Signed-off-by:
-
Antti Palosaari authored
Deferred probe was added in order to avoid udev vs. Kernel firmware download problems. It is not needed anymore. https://bugzilla.redhat.com/show_bug.cgi?id=827538Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
No need to access bInterfaceNumber via dvb_usb_v2 internals as driver has it already. That patch is prepare for dvb_usb_v2 deferred probe hack removal. It was added due to udev firmware loading problems, but things are fixed after that and it is not needed anymore. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
I did some tests against modulator (television signal generator) and this seems to improve sensitivity a little bit on channel I used. Used device was able to receive transmission just as weak signal as with Windows XP. Thanks to Jacek for donating his non-working device. I cannot ask he to test anymore... Reported-by:
Jacek Konieczny <jajcus@jajcus.net> Signed-off-by:
-
Katsuya Matsubara authored
The VSP1 driver allows to define the maximum number of each module such as RPF, WPF, and UDS in a platform data definition. This suppresses operations for nonexistent or unused modules. Signed-off-by:
Katsuya Matsubara <matsu@igel.co.jp> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Katsuya Matsubara authored
Each source entity maintains a pointer to the counterpart sink entity while an enabled link connects them. It should be managed by the setup_link callback in the media controller framework at runtime. However, enabled links which connect RPFs and WPFs that have an equivalent index number are created during initialization. This registers the pointer to a sink entity from the source entity when an enabled link is created. Signed-off-by:
-
Laurent Pinchart authored
The VSP1 is a video processing engine that includes a blender, scalers, filters and statistics computation. Configurable data path routing logic allows ordering the internal blocks in a flexible way. Due to the configurable nature of the pipeline the driver implements the media controller API and doesn't use the V4L2 mem-to-mem framework, even though the device usually operates in memory to memory mode. Only the read pixel formatters, up/down scalers, write pixel formatters and LCDC interface are supported at this stage. Signed-off-by:
-
Laurent Pinchart authored
NV16M and NV61M are planar YCbCr 4:2:2 and YCrCb 4:2:2 formats with a luma plane followed by an interleaved chroma plane. The planes are not required to be contiguous in memory, and the formats can only be used with the multi-planar formats API. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
