- 29 Nov, 2018 4 commits
-
-
Kai-Heng Feng authored
It's similar to other AMD audio devices, it also supports D3, which can save some power drain. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tony Das authored
This patch adds quirk VID/PID IDs for the SMSL D1 in order to enable Native DSD support. [ Moved the added entry in numerical order -- tiwai ] Signed-off-by: Tony Das <tdas444@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Chanho Min authored
Commit 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") fixes deadlock for non-atomic PCM stream. But, This patch causes antother stuck. If writer is RT thread and reader is a normal thread, the reader thread will be difficult to get scheduled. It may not give chance to release readlocks and writer gets stuck for a long time if they are pinned to single cpu. The deadlock described in the previous commit is because the linux rwsem queues like a FIFO. So, we might need non-FIFO writelock, not non-block one. My suggestion is that the writer gives reader a chance to be scheduled by using the minimum msleep() instaed of spinning without blocking by writer. Also, The *_nonblock may be changed to *_nonfifo appropriately to this concept. In terms of performance, when trylock is failed, this minimum periodic msleep will have the same performance as the tick-based schedule()/wake_up_q(). [ Although this has a fairly high performance penalty, the relevant code path became already rare due to the previous commit ("ALSA: pcm: Call snd_pcm_unlink() conditionally at closing"). That is, now this unconditional msleep appears only when using linked streams, and this must be a rare case. So we accept this as a quick workaround until finding a more suitable one -- tiwai ] Fixes: 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") Suggested-by: Wonmin Jung <wonmin.jung@lge.com> Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Currently the PCM core calls snd_pcm_unlink() always unconditionally at closing a stream. However, since snd_pcm_unlink() invokes the global rwsem down, the lock can be easily contended. More badly, when a thread runs in a high priority RT-FIFO, it may stall at spinning. Basically the call of snd_pcm_unlink() is required only for the linked streams that are already rare occasion. For normal use cases, this code path is fairly superfluous. As an optimization (and also as a workaround for the RT problem above in normal situations without linked streams), this patch adds a check before calling snd_pcm_unlink() and calls it only when needed. Reported-by: Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Nov, 2018 1 commit
-
-
Hui Wang authored
Like the Dell WD15 Dock, the WD19 Dock (0bda:402e) doens't provide useful string for the vendor and product names too. In order to share the UCM with WD15, here we keep the profile_name same as the WD15. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 27 Nov, 2018 3 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v4.20-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.20 Lots of fixes here, the majority of which are driver specific but there's a couple of core things and one notable driver specific one: - A core fix for a DAPM regression introduced during the component refactoring, we'd lost the code that forced a reevaluation of the DAPM graph after probe (which we suppress during init to save lots of recalcuation) and have now restored it. - A core fix for error handling using the newly added for_each_rtd_codec_dai_rollback() macro. - A fix for the names of widgets in the newly introduced pcm3060 driver, merged as a fix so we don't have a release with legacy names.
-
Kailang Yang authored
This patch will enable ALC300. [ It's almost equivalent with other ALC269-compatible ones, and apparently has no loopback mixer -- tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Girija Kumar Kasinadhuni authored
This device makes a loud buzzing sound when a headphone is inserted while playing audio at full volume through the speaker. Fixes: bbf8ff6b ("ALSA: hda/realtek - Fixup for HP x360 laptops with B&O speakers") Signed-off-by: Girija Kumar Kasinadhuni <gkumar@neverware.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Nov, 2018 1 commit
-
-
Hui Wang authored
We have several Lenovo laptops with the codec alc285, when playing sound via headphone, we can hear click/pop noise in the headphone, if we let the headphone share the DAC of NID 0x2 with the speaker, the noise disappears. The Lenovo laptops here include P52, P72, X1 yoda2 and X1 carbon. I have tried to set preferred_dacs and override_conn, but neither of them worked. Thanks for Kailang, he told me to invalidate the NID 0x3 through override_wcaps. BugLink: https://bugs.launchpad.net/bugs/1805079 Cc: <stable@vger.kernel.org> Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 Nov, 2018 3 commits
-
-
Takashi Iwai authored
The procedure for adding a user control element has some window opened for race against the concurrent removal of a user element. This was caught by syzkaller, hitting a KASAN use-after-free error. This patch addresses the bug by wrapping the whole procedure to add a user control element with the card->controls_rwsem, instead of only around the increment of card->user_ctl_count. This required a slight code refactoring, too. The function snd_ctl_add() is split to two parts: a core function to add the control element and a part calling it. The former is called from the function for adding a user control element inside the controls_rwsem. One change to be noted is that snd_ctl_notify() for adding a control element gets called inside the controls_rwsem as well while it was called outside the rwsem. But this should be OK, as snd_ctl_notify() takes another (finer) rwlock instead of rwsem, and the call of snd_ctl_notify() inside rwsem is already done in another code path. Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of sparc cs4231 driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of wss driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Nov, 2018 6 commits
-
-
Anisse Astier authored
MSI Cubi N 8GL (MS-B171) needs the same fixup as its older model, the MS-B120, in order for the headset mic to be properly detected. They both use a single 3-way jack for both mic and headset with an ALC283 codec, with the same pins used. Cc: stable@vger.kernel.org Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hans de Goede authored
Power-saving is causing plops on audio start/stop on the built-in audio of the nForce 430 based ASRock N68C-S UCC motherboard, add this model to the power_save blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 Cc: <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The function snd_ac97_put_spsa() gets the bit shift value from the associated private_value, but it extracts too much; the current code extracts 8 bit values in bits 8-15, but this is a combination of two nibbles (bits 8-11 and bits 12-15) for left and right shifts. Due to the incorrect bits extraction, the actual shift may go beyond the 32bit value, as spotted recently by UBSAN check: UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7 shift exponent 68 is too large for 32-bit type 'int' This patch fixes the shift value extraction by masking the properly with 0x0f instead of 0xff. Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Peter Ujfalusi authored
We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without overrun. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without under of overrun. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The latency number is in usec for the pm_qos. Correct the calculation to give us the time in usec Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 20 Nov, 2018 2 commits
-
-
Keyon Jie authored
The machine_quirk may return NULL which means the acpi entries should be skipped and search for next matched entry is needed, here add return check here and continue for NULL case. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The Skylake driver currently has a set of problems supporting load/unload modules. We need to make the HDaudio codec support optional to help narrow down the issues. Support for HDaudio codecs also leads to a Kconfig issue. We want the hdac_hda codec to be compilable independently of Skylake (e.g. with ALL_CODECS) but when Skylake is selected as built-in the hdac_hda codec needs to use the same option due a a code dependency Solve both problems by adding a user-selectable boolean Kconfig, select HDAC_HDA as needed and make the HDaudio codec support in the Skylake driver optional. Tests on a Chell Chromebook device without HDaudio show no regression for speaker and HDMI playback. This is submitted as an RFC to allow for comments and more validation. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 19 Nov, 2018 3 commits
-
-
Clément Péron authored
Sound dt-bindings are applied by ASoC maintainers and should be submit to ASoC list in addition to the devicetree list. Hence, add this information into the MAINTAINERS file. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Connor McAdams authored
This patch fixes the pincfg assignment for the AE-5, which was previously using the Recon3D pincfg's by mistake. Fixes: d06feaf0 ("ALSA: hda/ca0132 - Add pincfg for AE-5") Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Connor McAdams authored
This patch adds a new PCI subsys ID for the ZxR, as found and tested by other users. Without a way to know if any Z's use it as well, it keeps the quirk of QUIRK_SBZ and goes through the HDA subsys test function. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Nov, 2018 1 commit
-
-
Andreas Dannenberg authored
According to the current device datasheet (TI Lit # SLAS831D, revised March 2018) the value written to the device's PAGE register to trigger a complete register reset should be 0xfe, not 0xff. So go ahead and update to the correct value. Reported-by: Stephane Le Provost <stephane.leprovost@mediatek.com> Tested-by: Stephane Le Provost <stephane.leprovost@mediatek.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
- 14 Nov, 2018 3 commits
-
-
Tzung-Bi Shih authored
Audio map are possible in wrong state before card->instantiated has been set to true. Imaging the following examples: time 1: at the beginning in:-1 in:-1 in:-1 in:-1 out:-1 out:-1 out:-1 out:-1 SIGGEN A B Spk time 2: after someone called snd_soc_dapm_new_widgets() (e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c) in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN A B Spk time 3: routes added in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN -----> A -----> B ---> Spk In the end, the path should be powered on but it did not. At time 3, "in" of SIGGEN and "out" of Spk did not propagate to their neighbors because snd_soc_dapm_add_path() will not invalidate the paths if the card has not instantiated (i.e. card->instantiated is false). To correct the state of audio map, recalculate the whole map forcely. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The machine driver fails to probe in next-20181113 with: [ 2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered [ 2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517 ... [ 3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040 [ 3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040 [ 3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22 [ 3.715148] omap-abe-twl6040: probe of sound failed with error -22 Bisect pointed to a merge commit: first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master' and a diff between a working kernel does not reveal anything which would explain the change in behavior. Further investigation showed that on the second try of loading fails because the dai_link->platform is no longer NULL and it might be pointing to uninitialized memory. The fix is to move the snd_soc_dai_link and snd_soc_card inside of the abe_twl6040 struct, which is dynamically allocated every time the driver probes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kirill Marinushkin authored
In the initial commit [1], I added differential output of the codec as separate `+` and `-` widgets: OUTL+ OUTR+ OUTL- OUTR- Later, in the commit [2], I added a device tree property to configure the output as single-ended or differential. Having this property, the `+` and `-` separation in widgets seems for me confusing. There are no functional benefits in such separation, so I find reasonable to get rid of it: OUTL OUTR The new naming is more friendly for sound cards, and is better aligned with other codec drivers in kernel. Renaming the output widgets now should not be a problem from the backwards- compatibility perspective, as the driver for PCM3060 is added into the mainline very recently, and did not yet appear in any releases. [1] commit 6ee47d4a ("ASoC: pcm3060: Add codec driver") [2] commit a78c62de00d5 ("ASoC: pcm3060: Add DT property for single-ended output") Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 13 Nov, 2018 5 commits
-
-
Rohit kumar authored
Frontend dai_link id is used for closing ADM sessions. During concurrent usecase when one session is closed, it closes other ADM session associated with other usecase too. Dai_link->id should always point to Frontend dai id. Set cpu_dai id as dai_link id to fix the issue. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vasily Khoruzhick authored
sun8i-codec misses a route from ADC to AIF1 Slot 0 ADC. Add it to the driver to avoid adding it to every dts. Fixes: eda85d1f ("ASoC: sun8i-codec: Add ADC support for a33") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state. This patch was updated from an earlier version submitted upstream [1] which conflicted with the changes merged for HDaudio codec support with the Intel DSP. [1] https://patchwork.kernel.org/patch/10540213/Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Richard Fitzgerald authored
Stack memory isn't DMA-safe so it isn't safe to use either regmap_raw_read or regmap_bulk_read to read into stack memory. The two functions to read the scratch registers were using stack memory and regmap_raw_read. It's not worth allocating memory just for this trivial read, and it isn't time-critical. A simple regmap_read for each register is sufficient. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Katsuhiro Suzuki authored
This patch adds missing prepare_sleve_config that is needed for setup the DMA slave channel for I2S. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 12 Nov, 2018 2 commits
-
-
Takashi Iwai authored
We need to call pci_iounmap() instead of iounmap() for the regions obtained via pci_iomap() call for some archs that need special treatment. Fixes: aa31704f ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HP Pavilion 15 (103c:820d) with ALC295 codec requires the quirk for the mute LED control over mic3 pin. Added the corresponding quirk entry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201653 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Nov, 2018 2 commits
-
-
Vasily Khoruzhick authored
drvdata is actually sun8i_codec, not snd_soc_card, so it crashes when calling snd_soc_card_get_drvdata(). Drop card and scodec vars anyway since we don't need to disable/unprepare clocks - it's already done by calling runtime_suspend() Drop clk_disable_unprepare() calls for the same reason. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
PCM OSS layer may allocate a few temporary buffers, one for the core read/write and another for the conversions via plugins. Currently both are allocated via vmalloc(). But as the allocation size is equivalent with the PCM period size, the required size might be quite small, depending on the application. This patch replaces these vmalloc() calls with kvzalloc() for covering small period sizes better. Also, we use "z"-alloc variant here for addressing the possible uninitialized access reported by syzkaller. Reported-by: syzbot+1cb36954e127c98dd037@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Nov, 2018 3 commits
-
-
Srinivas Kandagatla authored
For some reason the dapm widgets are incorrectly defined from the start, Not sure how we ended up with such thing. Fix them now! Without this fix the backend dais are always powered up even if there is no active stream. Reported-by: Jimmy Cheng-Yi Chiang <cychiang@google.com> Reported-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
q6asm routing gets added multiple times as part of dai probe. Move this to q6routing routes which has those widgets defined, this also fixes the issue where these are added each time at dai probe. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
Since the commit c647f806 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") we allow enabling the mic mute LED with multiple ADCs. The commit changed the function return value to be zero or a negative error, while this change was overlooked in the thinkpad_acpi helper code where it still expects a positive return value for success. This eventually leads to a NULL dereference on a system that has only a mic mute LED. This patch corrects the return value check in the corresponding code as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201621 Fixes: c647f806 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Nov, 2018 1 commit
-
-
Takashi Iwai authored
The commit 37a3a98e ("ALSA: hda - Enable runtime PM only for discrete GPU") added a new ops gpu_bound to be called when GPU gets bound. The patch overlooked, however, that vga_switcheroo_enable() is called only once at GPU is bound. When an audio client is registered after that point, it would miss the gpu_bound call. This leads to the unexpected lack of runtime PM in HD-audio side. For addressing that regression, just call gpu_bound callback manually at vga_switcheroo_register_audio_client() when the GPU was already bound. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201615 Fixes: 37a3a98e ("ALSA: hda - Enable runtime PM only for discrete GPU") Cc: <stable@vger.kernel.org> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-