This addresses two issues that cause problems with viewperf maya-03 in
situation with memory pressure.

The first issue causes attempts to unreserve buffers if batched
reservation fails due to, for example, a signal pending. While previously
the ttm_eu api was resistant against this type of error, it is no longer
and the lockdep code will complain about attempting to unreserve buffers
that are not reserved. The issue is resolved by avoid calling
ttm_eu_backoff_reservation in the buffer reserve error path.

The second issue is that the binding_mutex may be held when user-space
fence objects are created and hence during memory reclaims. This may cause
recursive attempts to grab the binding mutex. The issue is resolved by not
holding the binding mutex across fence creation and submission.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

   This pull request fixes memory leak and some issues related to
   mixer and gscaler driver issues.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos/fimc: fix runtime pm support
  drm/exynos/mixer: always update INT_EN cache
  drm/exynos/mixer: correct vsync configuration sequence
  drm/exynos/mixer: fix interrupt clearing
  drm/exynos/hdmi: fix edid memory leak
  drm/exynos: gsc: fix wrong bitwise operation for swap detection

Pull device mapper fixes from Mike Snitzer:

 - two stable fixes for corruption seen in a snapshot of thinp metadata;
   metadata snapshots aren't widely used but help provide a consistent
   view of the metadata associated with an active thin-pool.

 - a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq"

* tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache policy smq: move 'dm-cache-default' module alias to SMQ
  dm btree: add ref counting ops for the leaves of top level btrees
  dm thin metadata: delete btrees when releasing metadata snapshot

Pull xen block driver fixes from Jens Axboe:
 "A few small bug fixes for xen-blk{front,back} that have been sitting
  over my vacation"

* 'for-linus' of git://git.kernel.dk/linux-block:
  xen-blkback: replace work_pending with work_busy in purge_persistent_gnt()
  xen-blkfront: don't add indirect pages to list when !feature_persistent
  xen-blkfront: introduce blkfront_gather_backend_features()

Pull xen bug fixes from David Vrabel:

 - revert a fix from 4.2-rc5 that was causing lots of WARNING spam.

 - fix a memory leak affecting backends in HVM guests.

 - fix PV domU hang with certain configurations.

* tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
  Revert "xen/events/fifo: Handle linked events when closing a port"
  x86/xen: build "Xen PV" APIC driver for domU as well

This reverts commits 9a036b93 ("x86/signal/64: Remove 'fs' and 'gs'
from sigcontext") and c6f20629 ("x86/signal/64: Fix SS handling for
signals delivered to 64-bit programs").

They were cleanups, but they break dosemu by changing the signal return
behavior (and removing 'fs' and 'gs' from the sigcontext struct - while
not actually changing any behavior - causes build problems).
Reported-and-tested-by: Stas Sergeev <stsp@list.ru>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi
    devices, from Emmanuel Grumbach.

 2) Falling back to vmalloc in conntrack should not emit a warning, from
    Pablo Neira Ayuso.

 3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis
    Felipe Dominguez Vega.

 4) Rocker doesn't free netdev on device removal, from Ido Schimmel.

 5) UDP multicast early sock demux has route handling races, from Eric
    Dumazet.

 6) Fix L4 checksum handling in openvswitch, from Glenn Griffin.

 7) Fix use-after-free in skb_set_peeked, from Herbert Xu.

 8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead
    to fraglists longer than the driver can support.  From Jason Wang.

 9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto.

10) Fix interrupt storm in bna driver, from Ivan Vecera.

11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann.

12) Fix inet request sock leak, from Eric Dumazet.

13) Fix TX interrupt masking and marking in TX descriptors of fs_enet
    driver, from LEROY Christophe.

14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely
    to get fixed any time soon.  From Jakub Kicinski

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  cosa: missing error code on failure in probe()
  gianfar: remove faulty filer optimizer
  gianfar: correct list membership accounting
  gianfar: correct filer table writing
  bonding: Gratuitous ARP gets dropped when first slave added
  net: dsa: Do not override PHY interface if already configured
  net: fs_enet: mask interrupts for TX partial frames.
  net: fs_enet: explicitly remove I flag on TX partial frames
  inet: fix possible request socket leak
  inet: fix races with reqsk timers
  mkiss: Fix error handling in mkiss_open()
  bnx2x: Free NVRAM lock at end of each page
  bnx2x: Prevent null pointer dereference on SKB release
  cxgb4: missing curly braces in t4_setup_debugfs()
  net-timestamp: Update skb_complete_tx_timestamp comment
  ipv6: don't reject link-local nexthop on other interface
  netlink: make sure -EBUSY won't escape from netlink_insert
  bna: fix interrupts storm caused by erroneous packets
  net: mvpp2: replace TX coalescing interrupts with hrtimer
  net: mvpp2: enable proper per-CPU TX buffers unmapping
  ...

Pull EDAC fix from Borislav Petkov:
 "A ppc4xx_edac fix for accessing ->csrows properly.  This driver was
  missed during the conversion a couple of years ago"

* tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ppc4xx: Access mci->csrows array elements properly

The commit

  de3910eb ("edac: change the mem allocation scheme to
		 make Documentation/kobject.txt happy")

changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: <stable@vger.kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by: Borislav Petkov <bp@suse.de>

If register_hdlc_device() fails, the current code returns 0 but we
should return an error code instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
gianfar: filer changes

respinning with examples as requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Current filer rule optimization is broken in several ways:
 (1) Can perform reads/writes beyond end of allocated tables.
     (gianfar_ethtool.c:1326).

(2) It breaks badly for rules with more than 2 specifiers
     (e.g. matching ip, port, tos).

Example:
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1
Added rule with ID 254
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9
Added rule with ID 253
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17
Added rule with ID 252
# ./filer_decode /sys/kernel/debug/gfar1/filer_raw
00: MASK == 00000210 AND         Q:00           ctrl:00000080 prop:00000210
01: FPR  == 00000210 AND CLE     Q:00           ctrl:00000281 prop:00000210
02: MASK == ffffffff AND         Q:00           ctrl:00000080 prop:ffffffff
03: DPT  == 00000003 AND         Q:00           ctrl:0000008e prop:00000003
04: TOS  == 00000003 AND         Q:00           ctrl:0000008a prop:00000003
05: DIA  == 0a000003 AND         Q:11           ctrl:0000448c prop:0a000003
06: DPT  == 00000002 AND         Q:00           ctrl:0000008e prop:00000002
07: TOS  == 00000002 AND         Q:00           ctrl:0000008a prop:00000002
08: DIA  == 0a000002 AND         Q:09           ctrl:0000248c prop:0a000002
09: DIA  == 0a000001 AND         Q:00           ctrl:0000008c prop:0a000001
0a: DPT  == 00000001 AND         Q:00           ctrl:0000008e prop:00000001
0b: TOS  == 00000001     CLE     Q:01           ctrl:0000060a prop:00000001
ff: MASK >= 00000000             Q:00           ctrl:00000020 prop:00000000

(Entire cluster gets AND-ed together).

 (3) We observed that the masking rules it generates do not
     play well with clustering on P2020.  Only first rule
     of the cluster would ever fire.  Given that optimizer
     relies heavily on masking this is very hard to fix.

Example:
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1  action 1
Added rule with ID 254
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2  action 9
Added rule with ID 253
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3  action 17
Added rule with ID 252
# ./filer_decode /sys/kernel/debug/gfar1/filer_raw
00: MASK == 00000210 AND         Q:00           ctrl:00000080 prop:00000210
01: FPR  == 00000210 AND CLE     Q:00           ctrl:00000281 prop:00000210
02: MASK == ffffffff AND         Q:00           ctrl:00000080 prop:ffffffff
03: DPT  == 00000003 AND         Q:00           ctrl:0000008e prop:00000003
04: DIA  == 0a000003             Q:11           ctrl:0000440c prop:0a000003
05: DPT  == 00000002 AND         Q:00           ctrl:0000008e prop:00000002
06: DIA  == 0a000002             Q:09           ctrl:0000240c prop:0a000002
07: DIA  == 0a000001 AND         Q:00           ctrl:0000008c prop:0a000001
08: DPT  == 00000001     CLE     Q:01           ctrl:0000060e prop:00000001
ff: MASK >= 00000000             Q:00           ctrl:00000020 prop:00000000

Which looks correct according to the spec but only the first
(eth id 252)/last added rule for 10.0.0.3 will ever trigger.
As if filer did not treat the AND CLE as cluster start but
also kept AND-ing the rules.  We found no errata covering this.

The fact that nobody noticed (2) or (3) makes me think
that this feature is not very widely used and we should just
remove it.
Reported-by: Aleksander Dutkowski <adutkowski@gmail.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At a cost of one line let's make sure .count is correct
when calling gfar_process_filer_changes().
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAX_FILER_IDX is the last usable index.  Using less-than
will already guarantee that one entry for catch-all rule
will be left, no need to subtract 1 here.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the first slave is added (such as during bootup) the first
gratuitous ARP gets dropped. We don't see this drop during a failover.
The packet gets dropped in qdisc (noop_enqueue).

The fix is to delay the sending of gratuitous ARPs till the bond dev's
carrier is present.

It can also be worked around by setting num_grat_arp to more than 1.
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case we need to divert reads/writes using the slave MII bus, we may have
already fetched a valid PHY interface property from Device Tree, and that
mode is used by the PHY driver to make configuration decisions.

If we could not fetch the "phy-mode" property, we will assign p->phy_interface
to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as
to whether or not we should override the interface value.

Fixes: 19334920 ("net: dsa: Set valid phy interface type")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 fix from Catalin Marinas:
 "Fix coarse clock monotonicity (VDSO timestamp off by one jiffy
  compared to the syscall one)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: VDSO: fix coarse clock monotonicity regression

Pull amd drm fixes from Alex Deucher:
 "Dave is on vacation at the moment, so please pull these radeon and
  amdgpu fixes directly.

  Just a few minor things for 4.2:

   - add a new radeon pci id
   - fix a power management regression in amdgpu
   - fix HEVC command buffer validation in amdgpu"

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add new OLAND pci id
  Revert "drm/amdgpu: Configure doorbell to maximum slots"
  drm/amdgpu: add context buffer size check for HEVC

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This reverts commit 78ad5cdd.
This commit breaks dpm and suspend/resume on CZ.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Pull regmap fix from Mark Brown:
 "regmap: Fix handling of present bits on rbtree cache block resize

  When expanding a cache block we use krealloc() to resize the register
  present bitmap without initialising the newly allocated data (the
  original code was written for kzalloc()).  Add an appropraite memset()
  to fix that"

* tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regcache-rbtree: Clean new present bits on present bitmap resize

When creating dm-cache with the default policy, it will call
request_module("dm-cache-default") to register the default policy.
But the "dm-cache-default" alias was left referring to the MQ policy.
Fix this by moving the module alias to SMQ.

Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq)
Signed-off-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When using nested btrees, the top leaves of the top levels contain
block addresses for the root of the next tree down.  If we shadow a
shared leaf node the leaf values (sub tree roots) should be incremented
accordingly.

This is only an issue if there is metadata sharing in the top levels.
Which only occurs if metadata snapshots are being used (as is possible
with dm-thinp).  And could result in a block from the thinp metadata
snap being reused early, thus corrupting the thinp metadata snap.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

The device details and mapping trees were just being decremented
before.  Now btree_del() is called to do a deep delete.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig fix from Steven Rostedt:
 "Leonidas Spyropoulos found that modules like nouveau were being
  unselected by make localmodconfig even though their configs were set
  and the module was loaded and visible by lsmod.

  The reason for this was because streamline-config.pl only looks at
  Makefiles, and not Kbuild files.  As these modules use Kbuild for
  their names, they too need to be checked by localmodconfig.  This was
  fixed by Richard Weinberger"

* tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Use Kbuild files too

In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.

Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at

Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Johan Hedberg says:

====================
pull request: bluetooth 2015-08-11

Here's an important regression fix for the 4.2-rc series that ensures
user space isn't given invalid LTK values. The bug essentially prevents
the encryption of subsequent LE connections, i.e. makes it impossible to
pair devices over LE.

Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We are not interested in interrupts for partially transmitted frames.
Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer
descriptors, instead it defines two interrupt bits, TXB and TXF.

We have to mask TXB in order to only get interrupts once the
frame is fully transmitted.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

We are not interested in interrupts for partially transmitted frames,
we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain
from a previously used descriptor.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull fbdev fixes from Tomi Valkeinen:
 - fix display regression on Versatile boards
 - fix OF node refcount bugs on omapdss
 - fix WARN about clock prepare on pxa3xx_gcu
 - fix mem leak in videomode helpers
 - fix fbconsole related boot problem on sun7i-a20-olinuxino-micro

* tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  fbcon: unconditionally initialize cursor blink interval
  video: Fix possible leak in of_get_videomode()
  video: fbdev: pxa3xx_gcu: prepare the clocks
  OMAPDSS: Fix omap_dss_find_output_by_port_node() port refcount decrement
  OMAPDSS: Fix node refcount leak in omapdss_of_get_next_port()
  fbdev: select versatile helpers for the integrator

The commit ccc9d90a "xenbus_client:
Extend interface to support multi-page ring" removes the call to
free_xenballooned_pages() in xenbus_unmap_ring_vfree_hvm(), leaking a
page for every shared ring.

Only with backends running in HVM domains were affected.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

This reverts commit fcdf31a7.

This was causing a WARNING whenever a PIRQ was closed since
shutdown_pirq() is called with irqs disabled.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: <stable@vger.kernel.org>

Once pm_runtime_set_active() gets called, the kernel assumes that given
device has already enabled runtime pm and will call pm_runtime_suspend()
without matching pm_runtime_resume(). In case of DRM FIMC IPP driver,
this will result in calling clk_disable() without respective call to
clk_enable(). This patch removes call to pm_runtime_set_active() to
ensure that pm_runtime_suspend/resume calls will match.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

INT_EN cache field was updated only by mixer_enable_vblank.
The patch adds update also by mixer_disable_vblank function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Specification advises to clear vsync indicator before configuring vsync.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The driver used incorrect flags to clear interrupt status.
The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

edid returned by drm_get_edid should be freed.
The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The bits for rotation are not used as exclusively. So GSC_IN_ROT_270 can
not be used for swap detection. The definition of it is same with
GSC_IN_ROT_MASK. It is enough to check GSC_IN_ROT_90 bit is set or not to
check whether width / height size swapping is needed.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

In commit b357a364 ("inet: fix possible panic in
reqsk_queue_unlink()"), I missed fact that tcp_check_req()
can return the listener socket in one case, and that we must
release the request socket refcount or we leak it.

Tested:

 Following packetdrill test template shows the issue

0     socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0    setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0    bind(3, ..., ...) = 0
+0    listen(3, 1) = 0

+0    < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop>
+0    > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.002 < . 1:1(0) ack 21 win 2920
+0    > R 21:21(0)

Fixes: b357a364 ("inet: fix possible panic in reqsk_queue_unlink()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>