- 24 Jul, 2008 40 commits
-
-
Hans-Christian Egtvedt authored
This patch adds a platform driver using the ATMEL PWM driver to control a backlight which requires a PWM signal and optional GPIO signal for discrete on/off signal. It has been tested on Favr-32 board from EarthLCD. The driver is configurable by supplying a struct with the platform data. See the include/linux/atmel-pwm-bl.h for details. The board code for Favr-32 will be submitted to the AVR32 kernel list. Signed-off-by:
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stefano Stabellini authored
The fourth bit of the background color is the blink property bit, not the intensity bit, as for the foreground color. Therefore it shouldn't be included in the background color. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Nobuhiro Iwamatsu authored
Framebuffer driver for the SH7760/SH7763 integrated LCD controller. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Reviewed-by:
Paul Mundt <lethal@linux-sh.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de> Signed-off-by:
-
Krzysztof Helt authored
Remove the xtimings structure which only stored some values to be used later (mostly once). Calculate and use these values in places they are needed. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
Drop structure which is only set but never read. Drop variables which are only set and never read. Convert one long switch into two shorter ones. Add cpu_relax() in busy waiting loop. Signed-off-by:
-
Krzysztof Helt authored
There is nothing to gain by converting value in kHz to fixed point MHz. Just calculate everything in kHz. A reorder of the loop allows reducing number of iterations (check if frequency is not too high already). Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make the needlessly global amifb_init() static - rename cleanup_module() to amifb_exit(), make it static __exit, use module_exit(), there's no need to #ifdef MODULE it Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Jordan Crouse authored
Simply enabling DAC blanking without turning off the CRT seems to be resulting in characters remaining on the screen when the monitor blanks. This patch turns off the CRT for all modes, and also powers down the DACs when vsync and/or hsync are disabled. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Acked-by:
Andres Salomon <dilinger@debian.org> Signed-off-by:
-
Andres Salomon authored
We never sent the gamma stuff upstream, and don't really care about it. However, lx_[gs]_et_gamma prototypes snuck into lxfb.h anyways; there are no definitions for them. Drop the dead code. Signed-off-by:
-
Yoichi Yuasa authored
Remove old broken Cobalt LCD driver. Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Yoichi Yuasa authored
Add new Cobalt LCD framebuffer driver. [akpm@linux-foundation.org: fix build] Signed-off-by:
-
Timur Tabi authored
Update the Freescale DIU driver to use page_alloc_exact() to allocate a DMA buffer. This also eliminates the rheap-based memory allocator. We can do this now because commit 6ccf61f9 allows us to allocate 8MB physically- contiguous memory blocks. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Ben Dooks authored
Add a platform_lcd driver to allow boards with simple lcd power controls to register themselves easily. [akpm@linux-foundation.org: build fix] Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Ben Dooks authored
Add the lcd_device being checked to the check_fb entry of lcd_ops. This ensures that any driver using this to check against it's own state can do so, and also makes all the calls in lcd_ops more orthogonal in their arguments. Signed-off-by:
-
Ben Dooks authored
Provide support for the ILI9320 display controller chip which is found in many LCD displays. Included with this is support for an example LCD using this chip, the VGG2432A4. Signed-off-by:
-
Ben Dooks authored
As pointed out by Andrew Morton, we have a problem when setting the 64bit resources option. Alter the allocation routines to remove the need to use the start and end fields, use the proper HEAD_PANEL/HEAD_CRT and update the comments. Note, we also fix the bug where we failed to check the size of the CRT memory allocation. [akpm@linux-foundation.org: cleanup] Signed-off-by:
-
Ben Dooks authored
Add the ability to register only one of the two possible main framebuffer devices on the SM501 by passing platform data for only the framebuffer that you are interested in having. As a side note, we update the init sequence to commonise the code that is executed twice, and fix a pair of missing frees that we didn't do on framebuffer exit, such as freeing the fb's cmap. Signed-off-by:
-
Ben Dooks authored
Add flags to allow the driver to invert the sense of both VBIASEN and FPEN signals comming from the SM501. Signed-off-by:
-
Nicolas Ferre authored
Avoid division by zero in atmel_lcdfb_check_var() function. If pixclock is not specified while passing a var structure in the check_var() funtion, a division by zero occurs (when translating pixclock to KHz). This patch adds a checking of this value and try to choose a video mode in the modelist. The mode found in the probe function in added to the modelist. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Krzysztof Helt authored
It updates skeletonfb to new platform driver API. The skeletonfb is templates for creating new drivers. Signed-off-by:
-
Akinobu Mita authored
Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ville Syrjala authored
The argument to iounmap() is void __iomem *. Fix the cast. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ville Syrjala authored
Properly propagate errors to the probe function. Signed-off-by:
-
Ville Syrjala authored
Convert atyfb to use a PCI device ID table. Signed-off-by:
-
Ville Syrjala authored
Atari probe code relies on correct_chipset() failing if the device is not a mach64 GX/CX. aty_chips[] array would be indexed with -1 in that case. Signed-off-by:
-
Olaf Hering authored
Remove dead code. This will slightly change the behaviour of the driver on systems that support backlight control. Previously they would just turn the backlight off using the backlight control but now the generic LCD code will also turn off the LCD using the POWER_MANAGEMENT register. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Ville Syrjala authored
The xoffset, yoffset and yres members of fb_var_screeninfo are __u32. Make them unsigned in the code as well. Signed-off-by:
-
Ville Syrjala authored
The width and height members of fb_var_screeninfo are __u32. The code initializes them to -1 which seems wrong, and 0 seems like an equally good default value. Signed-off-by:
-
Krzysztof Helt authored
Convert the hgafb driver to use new platform driver API. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9689Signed-off-by:
-
Frans Pop authored
The Kconfig help for the vfb driver says: Do NOT enable it for normal systems! To protect the innocent, it has to be enabled explicitly at boot time using the kernel option `video=vfb:'. This change lets the code match the description. Support for vfb:disable is kept for backwards compatibility; vfb:off works because it is tested at a higher level. Note: any undefined option (e.g. vfb:enable) will also enable this driver. The relevant code has been unchanged since before the migration to git (2.6.12). This patch fixes bugzilla #9310 and was the root cause behind http://lkml.org/lkml/2008/5/31/220. Signed-off-by:
Frans Pop <elendil@planet.nl> Cc: Antonino A. Daplas <adaplas@gmail.com> Acked-by:
-
Magnus Damm authored
This is the SuperH Mobile LCDC frame buffer driver V2, adding support for the LCDC block found in SuperH Mobile processors. The hardware supports up to two LCD panels per LCDC block, and both RGB and SYS interfaces can be used to hook up LCD panels/modules. The device driver is a regular platform driver, so LCD configuration and board specific hooks are passed to the driver using platform data. LCD modules using SYS interface often require special configuration using the SYS bus, and to solve this cleanly the driver provides SYS interface operations to the board code. Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA panels using RGB16 and RGB18 interfaces. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Acked-by:
Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Krzysztof Helt authored
These checks and assignments are done by a higher layer so remove them from the driver. Signed-off-by:
-
Krzysztof Helt authored
Use constants and functions from the vga.h file. Also add module description. Signed-off-by:
-
Krzysztof Helt authored
Small step toward unification of mode setting parameter. This is required to fix the Bugzilla's bug 9847 Signed-off-by:
-
Krzysztof Helt authored
Make the tridentfb documentation closer to current state of the tridentfb driver. Fix also some formatting. Signed-off-by:
-
Krzysztof Helt authored
Make more drivers use the "mode_option" parameter. This one is quite new so drop the old "mode" parameter before someone starts using it seriously. Signed-off-by:
-
Krzysztof Helt authored
Make logo_height variable local in the only function it is used. Signed-off-by:
-
Nicolas Ferre authored
Manage atmel_lcdfb FIFO underflow Resetting the LCD and DMA allows to fix screen shifting after a FIFO underflow. It follows reset sequence from errata "LCD Screen Shifting After a Reset". Signed-off-by:
-
Roel Kluin authored
dx and dy are u32's, so the test should occur before the subtraction Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Roel Kluin authored
dx and dy are u32's, so the test should occur before the subtraction Signed-off-by:
-
