- 07 Oct, 2016 10 commits
-
-
Roger Quadros authored
commit d248220f upstream. Since commit 6ce0d200 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d200 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robin Murphy authored
commit ba6dea4f upstream. Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Alex Deucher authored
commit 670bb4fd upstream. Add clock quirks for Jet parts. Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ilia Mirkin authored
commit 666ca3d8 upstream. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 05fb3c19 upstream. Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by:
David Saggiorato <david@saggiorato.net> Tested-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit e1bfc11c upstream. cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.orgSigned-off-by:
-
Sergei Miroshnichenko authored
commit 9abefcb1 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24Signed-off-by:
Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
zhong jiang authored
commit 5b398e41 upstream. I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Hugh Dickins <hughd@google.com> Suggested-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Karl Beldan authored
commit f6d7c1b5 upstream. This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9 ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e5 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Signed-off-by:
Karl Beldan <kbeldan@baylibre.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Joonwoo Park authored
commit 28b89b9e upstream. A discrepancy between cpu_online_mask and cpuset's effective_cpus mask is inevitable during hotplug since cpuset defers updating of effective_cpus mask using a workqueue, during which time nothing prevents the system from more hotplug operations. For that reason guarantee_online_cpus() walks up the cpuset hierarchy until it finds an intersection under the assumption that top cpuset's effective_cpus mask intersects with cpu_online_mask even with such a race occurring. However a sequence of CPU hotplugs can open a time window, during which none of the effective CPUs in the top cpuset intersect with cpu_online_mask. For example when there are 4 possible CPUs 0-3 and only CPU0 is online: ======================== =========================== cpu_online_mask top_cpuset.effective_cpus ======================== =========================== echo 1 > cpu2/online. CPU hotplug notifier woke up hotplug work but not yet scheduled. [0,2] [0] echo 0 > cpu0/online. The workqueue is still runnable. [2] [0] ======================== =========================== Now there is no intersection between cpu_online_mask and top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at this moment can cause following: Unable to handle kernel NULL pointer dereference at virtual address 000000d0 ------------[ cut here ]------------ Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable] Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98 task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000 PC is at guarantee_online_cpus+0x2c/0x58 LR is at cpuset_cpus_allowed+0x4c/0x6c <snip> Process taskset (pid: 1420, stack limit = 0xffffffc06e124020) Call trace: [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58 [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28 The top cpuset's effective_cpus are guaranteed to be identical to cpu_online_mask eventually. Hence fall back to cpu_online_mask when there is no intersection between top cpuset's effective_cpus and cpu_online_mask. Signed-off-by:
Joonwoo Park <joonwoop@codeaurora.org> Acked-by:
Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 30 Sep, 2016 30 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit 8a545f18 upstream. We can't pass error pointers to kfree() or it causes an oops. Fixes: 52b209f7 ('get rid of hostfs_read_inode()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Dan Carpenter authored
commit f4cceb2a upstream. If kmap fails, it leads to memory corruption. Fixes: f64122c1 ('drm: add new QXL driver. (v1.4)') Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwandaSigned-off-by:
-
Sven Van Asbroeck authored
commit 5381cfb6 upstream. The device's model download function returns the model data as an array of u32s, which is later compared to the reference model data. However, since the latter is an array of u16s, the comparison does not happen correctly, and model verification fails. This in turn breaks the POR initialization sequence. Fixes: 39e7213e ("max17042_battery: Support regmap to access device's registers") Reported-by:
Sven Van Asbroeck <TheSven73@googlemail.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Wei Yongjun authored
commit 33e7664a upstream. Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Fixes: 3636859b ("power_supply: Add support for tps65217-charger") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
James Morse authored
commit 924d8696 upstream. rtree_next_node() walks the linked list of leaf nodes to find the next block of pages in the struct memory_bitmap. If it walks off the end of the list of nodes, it walks the list of memory zones to find the next region of memory. If it walks off the end of the list of zones, it returns false. This leaves the struct bm_position's node and zone pointers pointing at their respective struct list_heads in struct mem_zone_bm_rtree. memory_bm_find_bit() uses struct bm_position's node and zone pointers to avoid walking lists and trees if the next bit appears in the same node/zone. It handles these values being stale. Swap rtree_next_node()s 'step then test' to 'test-next then step', this means if we reach the end of memory we return false and leave the node and zone pointers as they were. This fixes a panic on resume using AMD Seattle with 64K pages: [ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 6.896453] PM: Using 3 thread(s) for decompression. [ 6.896453] PM: Loading and decompressing image data (5339 pages)... [ 7.318890] PM: Image loading progress: 0% [ 7.323395] Unable to handle kernel paging request at virtual address 00800040 [ 7.330611] pgd = ffff000008df0000 [ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000 [ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7.349825] Modules linked in: [ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737 [ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016 [ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000 [ 7.375020] PC is at set_bit+0x18/0x30 [ 7.378758] LR is at memory_bm_set_bit+0x24/0x30 [ 7.383362] pc : [<ffff00000835bbc8>] lr : [<ffff0000080faf18>] pstate: 60000045 [ 7.390743] sp : ffff8003c0283b00 [ 7.473551] [ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020) [ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000) [ 7.800075] Call trace: [ 7.887097] [<ffff00000835bbc8>] set_bit+0x18/0x30 [ 7.891876] [<ffff0000080fb038>] duplicate_memory_bitmap.constprop.38+0x54/0x70 [ 7.899172] [<ffff0000080fcc40>] snapshot_write_next+0x22c/0x47c [ 7.905166] [<ffff0000080fe1b4>] load_image_lzo+0x754/0xa88 [ 7.910725] [<ffff0000080ff0a8>] swsusp_read+0x144/0x230 [ 7.916025] [<ffff0000080fa338>] load_image_and_restore+0x58/0x90 [ 7.922105] [<ffff0000080fa660>] software_resume+0x2f0/0x338 [ 7.927752] [<ffff000008083350>] do_one_initcall+0x38/0x11c [ 7.933314] [<ffff000008b40cc0>] kernel_init_freeable+0x14c/0x1ec [ 7.939395] [<ffff0000087ce564>] kernel_init+0x10/0xfc [ 7.944520] [<ffff000008082e90>] ret_from_fork+0x10/0x40 [ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) [ 7.955909] ---[ end trace 0024a5986e6ff323 ]--- [ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Here struct mem_zone_bm_rtree's start_pfn has been returned instead of struct rtree_node's addr as the node/zone pointers are corrupt after we walked off the end of the lists during mark_unsafe_pages(). This behaviour was exposed by commit 6dbecfd3 ("PM / hibernate: Simplify mark_unsafe_pages()"), which caused mark_unsafe_pages() to call duplicate_memory_bitmap(), which uses memory_bm_find_bit() after walking off the end of the memory bitmap. Fixes: 3a20cb17 (PM / Hibernate: Implement position keeping in radix tree) Signed-off-by:
James Morse <james.morse@arm.com> [ rjw: Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Thomas Garnier authored
commit 62822e2e upstream. Restore the processor state before calling any other functions to ensure per-CPU variables can be used with KASLR memory randomization. Tracing functions use per-CPU variables (GS based on x86) and one was called just before restoring the processor state fully. It resulted in a double fault when both the tracing & the exception handler functions tried to use a per-CPU variable. Fixes: bb3632c6 (PM / sleep: trace events for suspend/resume) Reported-and-tested-by:
Jiri Kosina <jikos@kernel.org> Tested-by:
Rafael J. Wysocki <rafael@kernel.org> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Thomas Garnier <thgarnie@google.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Matt Redfearn authored
commit 951c39cd upstream. If the paravirt machine is compiles without CONFIG_SMP, the following linker error occurs arch/mips/kernel/head.o: In function `kernel_entry': (.ref.text+0x10): undefined reference to `smp_bootstrap' due to the kernel entry macro always including SMP startup code. Wrap this code in CONFIG_SMP to fix the error. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14212/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Huacai Chen authored
commit 3cbc6fc9 upstream. Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") missing a ".set pop" in macro fpu_restore_16even, so add it. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Acked-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14210/Signed-off-by:
-
Marcin Nowakowski authored
commit b244614a upstream. cpu_has_fpu macro uses smp_processor_id() and is currently executed with preemption enabled, that triggers the warning at runtime. It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning. Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14125/Signed-off-by:
-
Paul Burton authored
commit b03c1e3b upstream. Commit c1a0e9bc ("MIPS: Allow compact branch policy to be changed") added Kconfig entries allowing for the compact branch policy used by the compiler for MIPSr6 kernels to be specified. This can be useful for debugging, particularly in systems where compact branches have recently been introduced. Unfortunately mainline gcc 5.x supports MIPSr6 but not the -mcompact-branches compiler flag, leading to MIPSr6 kernels failing to build with gcc 5.x with errors such as: mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal' make[2]: *** [kernel/bounds.s] Error 1 Fixing this by hiding the Kconfig entry behind another seems to be more hassle than it's worth, as MIPSr6 & compact branches have been around for a while now and if policy does need to be set for debug it can be done easily enough with KCFLAGS. Therefore remove the compact branch policy Kconfig entries & their handling in the Makefile. This reverts commit c1a0e9bc ("MIPS: Allow compact branch policy to be changed"). Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: c1a0e9bc ("MIPS: Allow compact branch policy to be changed") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14241/Signed-off-by:
-
James Hogan authored
commit 554af0c3 upstream. The page structures associated with the vDSO pages in the kernel image are calculated using virt_to_page(), which uses __pa() under the hood to find the pfn associated with the virtual address. The vDSO data pointers however point to kernel symbols, so __pa_symbol() should really be used instead. Since there is no equivalent to virt_to_page() which uses __pa_symbol(), fix init_vdso_image() to work directly with pfns, calculated with __phys_to_pfn(__pa_symbol(...)). This issue broke the Malta Enhanced Virtual Addressing (EVA) configuration which has a non-default implementation of __pa_symbol(). This is because it uses a physical alias so that the kernel executes from KSeg0 (VA 0x80000000 -> PA 0x00000000), while RAM is provided to the kernel in the KUSeg range (VA 0x00000000 -> PA 0x80000000) which uses the same underlying RAM. Since there are no page structures associated with the low physical address region, some arbitrary kernel memory would be interpreted as a page structure for the vDSO pages and badness ensues. Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14229/Signed-off-by:
-
Matt Redfearn authored
commit 8f46cca1 upstream. This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Tested-by:
-
Paul Burton authored
commit 7e956304 upstream. In the mipsr2_decoder() function, used to emulate pre-MIPSr6 instructions that were removed in MIPSr6, the init_fpu() function is called if a removed pre-MIPSr6 floating point instruction is the first floating point instruction used by the task. However, init_fpu() performs varous actions that rely upon not being migrated. For example in the most basic case it sets the coprocessor 0 Status.CU1 bit to enable the FPU & then loads FP register context into the FPU registers. If the task were to migrate during this time, it may end up attempting to load FP register context on a different CPU where it hasn't set the CU1 bit, leading to errors such as: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 Fix this by disabling preemption around the call to init_fpu(), ensuring that it starts & completes on one CPU. Signed-off-by:
-
Sudeep Holla authored
commit 331dcf42 upstream. If the i2c device is already runtime suspended, if qup_i2c_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the following splat: WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90 Modules linked in: CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) PC is at clk_core_unprepare+0x80/0x90 LR is at clk_unprepare+0x28/0x40 pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145 Call trace: clk_core_unprepare+0x80/0x90 qup_i2c_disable_clocks+0x2c/0x68 qup_i2c_suspend+0x10/0x20 platform_pm_suspend+0x24/0x68 ... This patch fixes the issue by executing qup_i2c_pm_suspend_runtime conditionally in qup_i2c_suspend. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Reviewed-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Yadi.hu authored
commit 371a0153 upstream. the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by:
Yadi.hu <yadi.hu@windriver.com> Signed-off-by:
-
Jeff Mahoney authored
commit 325c50e3 upstream. If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e7090 (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c (Btrfs: add snapshot/subvolume destroy ioctl) Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Johannes Berg authored
commit ad5987b4 upstream. Due to an apparent copy/paste bug, the number of counters for the beacon configuration were checked twice, instead of checking the number of probe response counters. Fix this to check the number of probe response counters before parsing those. Fixes: 9a774c78 ("cfg80211: Support multiple CSA counters") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Fabio Estevam authored
commit 4de349e7 upstream. On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Hugh Dickins authored
commit b385d21f upstream. init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically initialized with zeroes in the init_task, and copied from parent to child while it is quiescent in arch_dup_task_struct(); so I went to delete it. But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to check that it was always empty at that point, and found them firing: because memcg reclaim can recurse into global reclaim (when allocating biosets for swapout in my case), and arrive back at the init_tlb_ubc() in shrink_node_memcg(). Resetting tlb_ubc.flush_required at that point is wrong: if the upper level needs a deferred TLB flush, but the lower level turns out not to, we miss a TLB flush. But fortunately, that's the only part of the protocol that does not nest: with the initialization removed, cpumask collects bits from upper and lower levels, and flushes TLB when needed. Fixes: 72b252ae ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 1245800c upstream. The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f ("tracing/core: make the read callbacks reentrants") Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Al Viro authored
commit 1ae2293d upstream. Signed-off-by:
-
Arvind Yadav authored
commit bae170ef upstream. Free memory mapping, if probe is not successful. Fixes: 4a9b3737 ("power: reset: move hisilicon reboot code") Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 79ad07d4 upstream. There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa8 ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by:
-
Dan Carpenter authored
commit dc01a28d upstream. We check for NULL but then dereference "info->mtd" on the next line. Fixes: 72169755 ('mtd: maps: sa1100-flash: show parent device in sysfs') Signed-off-by:
-
Al Viro authored
commit e23d4159 upstream. Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
-
Jan Kara authored
commit 96d41019 upstream. fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
-
Jan Kara authored
commit 12703dbf upstream. Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.czSigned-off-by:
-
Brian Foster authored
commit 800b2694 upstream. xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Ian Kent authored
commit 7cbdb4a2 upstream. Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
