into ppc970.osdl.org:/home/torvalds/v2.6/linux

  CC [M]  drivers/scsi/scsi_transport_fc.o
drivers/scsi/scsi_transport_fc.c: In function `fc_stat_show':
drivers/scsi/scsi_transport_fc.c:634: warning: long long unsigned int format, long unsigned int arg (arg 4)

To us %llx on a 64 bit platform we have to cast u64 to 
unsigned long long.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: 	James.Smart@Emulex.Com

This patch updates the fc_transport with attributes for local FC ports
(e.g. Hosts).  The port attributes are defined per HBAAPI v2.0 definitions.

This patch results in the following in /sys/class:
-----------------------------------------------------

[jsmart@elxware class]$ cd /sys/class
[jsmart@elxware class]$ ls
fc_host       graphics  misc     pci_bus       scsi_host  usb_host
fc_transport  input     net      scsi_device   tty        vc
firmware      mem       netlink  scsi_generic  usb
[jsmart@elxware class]$ cd fc_host
[jsmart@elxware fc_host]$ ls
host4

[jsmart@elxware fc_host]$ cd host4
[jsmart@elxware host4]$ ls
device                 host_port_maxframe_size      host_port_supported_speeds
host_fabric_name       host_port_name               host_port_symbolic_name
host_link_down_tmo     host_port_speed              host_port_type
host_node_name         host_port_state              host_tgtid_bind_type
host_port_active_fc4s  host_port_supported_classes  statistics
host_port_id           host_port_supported_fc4s
[jsmart@elxware host4]$ ls -ld *
lrwxrwxrwx  1 root root    0 Oct 13 18:24 device -> ../../../devices/platform/host4
-r--r--r--  1 root root 4096 Oct 13 18:24 host_fabric_name
-rw-r--r--  1 root root 4096 Oct 13 18:24 host_link_down_tmo
-r--r--r--  1 root root 4096 Oct 13 18:24 host_node_name
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_active_fc4s
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_id
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_maxframe_size
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_name
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_speed
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_state
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_supported_classes
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_supported_fc4s
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_supported_speeds
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_symbolic_name
-r--r--r--  1 root root 4096 Oct 13 18:24 host_port_type
-rw-r--r--  1 root root 4096 Oct 13 18:24 host_tgtid_bind_type
drwxr-xr-x  2 root root    0 Oct 13 18:24 statistics


Using the following script (/tmp/show_attributes):
    #!/bin/sh
    FILES=`ls *`
    for file in $FILES; do
      if [ -f $file ] ; then
        echo "$file : " `cat $file`
      fi
    done

Here's a sample of querying the attributes:

[jsmart@elxware /]$ cd /sys/class/fc_host/host4
[jsmart@elxware host4]$ /tmp/show_attributes
host_fabric_name :  0x33334444ffeeddcc
host_link_down_tmo :  30
host_node_name :  0x78563412aabbccdd
host_port_active_fc4s :  hex: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
host_port_id :  0x789abc
host_port_maxframe_size :  2511 bytes
host_port_name :  0xefcdab9011223344
host_port_speed :  2 Gbit
host_port_state :  Online
host_port_supported_classes :  Class 2, Class 3
host_port_supported_fc4s :  hex: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
host_port_supported_speeds :  2 Gbit, 4 Gbit, 10 Gbit
host_port_symbolic_name :  LP9052 Dual Port Adapter
host_port_type :  NPort (fabric via point-to-point)
host_tgtid_bind_type :  wwpn (World Wide Port Name)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Description: Use msleep() instead of schedule_timeout()
to guarantee the task delays as expected.  Originally
submitted to linux-scsi by the janitors, and resubmitted
by boutcher (after testing :-)
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Dave Boutcher <boutcher@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

the ibm_acpi.c driver references acpi_ibm_exit() from it's __init function,
which means the exit function isn't allowed to be __exit since __exit
functions are not part of vmlinux while __init functions are.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

They were already there, properly sorted too.

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

Originally submitted by Mike Waychison <Michael.Waychison@sun.com> in
August but apparently lost.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

SCSI ioctls can ask for a lot of memory and fail. We don't need to vomit
in the log file for this case. Again taken from the Red Hat minor
patches applied for FC3.

Original-patch: Arjan van de Ven <arjanv@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Paul Laufer informed the list that he had changed address and his change
of address had been ignored so CREDITS was still wrong although other
files had been updated.

Fix this.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Red Hat got some confused customers due to this message. The confused
user case is when they update the BIOS and all of a sudden we have "no
suitable data" yet we did before. We (Arjan van de Ven) thus changed it
to "No new microcode" which is much much clearer.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add some more funky AC97 knowledge to the intel8x0 driver. These come
from Red Hat and its partners and are included in our shipping code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into nuts.davemloft.net:/disk1/BK/net-2.6

Merry Christmas everyone. Ho ho ho!

rth tells me that some versions of gcc may end up using the
SSE registers for data movement when you do that.

Use "-march=i686 -mtune=xxxx" instead.

(We do the same thing for march=pentium2/4 too, just for
consistency).

evdev, joydev, mousedev, tsdev - remove class device and devfs entry when
hardware driver disconnects instead of waiting for the last user to drop off. 
This way hardware drivers can be unloaded at any time.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds missing lock_kernel()/unlock_kernel() pair in
reiserfs_get_dentry
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

mm/rmap.c contains an open-coded reference to swap_token_default_timeout
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

CFQ v2 has some spare queue logic that was never enabled.  It has an SMP
deadlock because it attempts to regrab the queue lock in the exit path, so
kill the spare queue stuff completely for 2.6.10.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

switch_uid() doesn't care about tasklist_lock, so do it outside
the lock and avoid a subtle (and very very unlikely to trigger)
AB-BA deadlock.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes a build failure with gcc-3.4.1, where we use some functions
before we define them inline. 

The simple way to fix those is to simply un-inline the functions in
question. Since they are somewhat large that's what I did.

An alternative would be to rework the ordering of the file so the
functions are defined before their first use.
Signed-off-by: Jesper juhl <juhl-lkml@dif.dk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This adds an extra attribute to tell you what type of queueing the
driver is using: none, simple or ordered.  If the driver supplies the
change_queue_type API, you can also alter this (which would allow the
turning on or off of TCQ).

I also fixed the change_queue_depth not to allow the user to go below
one.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

advansys.c fails to build for old ISA cards when CONFIG_PCI is not
enabled.
Signed-off-by: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

into oss.sgi.com:/oss4/bitkeeper/xfs-linux-2.6

agp=off disabled the agpgart driver, but not the chipset specific drivers,
which still did their init routines. Chaos ensued.
Signed-off-by: Dave Jones <davej@redhat.com>

From: Peer.Chen@uli.com.tw
Signed-off-by: Dave Jones <davej@redhat.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux