- 25 Oct, 2021 5 commits
-
-
Maxime Ripard authored
When the firmware doesn't setup the HSM rate (such as when booting without an HDMI cable plugged in), its rate is 0 and thus any register access results in a CPU stall, even though HSM is enabled. Let's enforce a minimum rate at boot to avoid this issue. Fixes: 4f6e3d66 ("drm/vc4: Add runtime PM support to the HDMI encoder driver") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by:
Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-4-maxime@cerno.tech
-
Maxime Ripard authored
The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32c ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32c ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Reviewed-by:
-
Maxime Ripard authored
The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8ad ("clk: bcm2835: Support for clock parent selection") Signed-off-by:
-
Maxime Ripard authored
drm-misc-next hasn't been updated in a while and I need a post -rc2 state to merge some vc4 patches. Signed-off-by: -
Christian König authored
Makes the handling a bit more complex, but avoids the use of dma_resv_get_excl_unlocked(). v2: improve coding and documentation v3: adjust the TODO comment as suggested by Daniel Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-25-christian.koenig@amd.com
-
- 22 Oct, 2021 8 commits
-
-
Thomas Zimmermann authored
DRM core uses the GEM base object to access GEM functionality. It does not depend on individual implementations. Move the code into modules. Also move the CMA framebuffer helpers into the CMA's module, as they're not usable without CMA. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Thomas Zimmermann authored
Several core DRM functions are not used by the DRM core. Link the object files into the KMS helper library. Signed-off-by:
-
Thomas Zimmermann authored
All code in drm_irq.o is for legacy UMs drivers. Only build and link the file if CONFIG_DRM_LEGACY has been enabled. Signed-off-by:
-
Christian König authored
Simplifying the code a bit. Signed-off-by:
-
Christian König authored
Simplifying the code a bit. Signed-off-by:
-
Christian König authored
Just exercising a very minor subset of the functionality, but already proven useful. v2: add missing locking v3: some more cleanup and consolidation, add unlocked test as well v4: add a dma_resv_get_fences selftest Signed-off-by:
-
Christian König authored
Simplifying the code a bit. The new implementation unifies the handling between drivers and so results in waiting for all shared fernces in all cases. Signed-off-by:
-
Christian König authored
Those members where renamed, update the kerneldoc as well. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211021141945.84023-1-christian.koenig@amd.com
-
- 21 Oct, 2021 5 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Expose multi-LRC submission interface Similar to the bonded submission interface but simplified. Comes with GuC only implementation for now. See kerneldoc for more details. Userspace changes: https://github.com/intel/media-driver/pull/1252 - Expose logical engine instance to user Needed by the multi-LRC submission interface for GuC Userspace changes: https://github.com/intel/media-driver/pull/1252 Driver Changes: - Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh) - Add support for multi-LRC submission in the GuC backend (Matt B) - Add extra cache flushing before making pages userspace visible (Matt A, Thomas) - Mark internal GPU object pages dirty so they will be flushed properly (Matt A) - Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi) - Replace the unconditional clflushes with drm_clflush_virt_range() (Ville) - Remove IS_ACTIVE macro completely (Lucas) - Improve kerneldocs for cache_dirty (Matt A) - Add missing includes (Lucas) - Selftest improvements (Matt R, Ran, Matt A) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - No Functional change, but a clarification around I915_TILING values (Matt). Driver Changes: - Changes around async flip VT-d w/a (Ville) - Delete bogus NULL check in intel_ddi_encoder_destroy (Dan) - DP link training improvements and DP per-lane driver settings (Ville) - Free the returned object of acpi_evaluate_dsm (Zenghui) - Fixes and improvements around DP's UHBR and MST (Jani) - refactor plane config + pin out (Dave) - remove unused include in intel_dsi_vbt.c (Lucas) - some code clean up (Lucas, Jani) - gracefully disable dual eDP (Jani) - Remove memory frequency calculation (Jose) - Fix oops on platforms w/o hpd support (Ville) - Clean up PXP Kconfig info (Rodrigo) Signed-off-by:
-
Thomas Zimmermann authored
Moving the driver-specific mmap code into a GEM object function allows for using DRM helpers for various mmap callbacks. The respective rockchip functions are being removed. The file_operations structure fops is now being created by the helper macro DEFINE_DRM_GEM_FOPS(). Signed-off-by:
Heiko Stuebner <heiko@sntech.de> [On RK3188/RK3066 (without iommu)] Tested-by:
Alex Bee <knaerzche@gmail.com> Signed-off-by:
-
Jernej Skrabec authored
Driver never uses virtual address of DRM CMA buffers. Switch to CMA helpers which don't deal with virtual mapping. This was actually already the case before commit ad408c76 ("drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations"), but only convenient macro at the time used helpers with virtual mapping. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Thomas Zimmermann authored
Gma500 currently removes generic fbdev drivers, but ignores generic DRM drivers. Use aperture helpers to remove all generic graphics drivers before loading gma500. Makes gma500 compatible with simpledrm. Signed-off-by:
-
- 20 Oct, 2021 13 commits
-
-
Matthew Auld authored
Just like we do for internal objects. Also just use i915_gem_object_set_cache_coherency() here. No need for over-flushing on LLC platforms. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-9-matthew.auld@intel.com
-
Matthew Auld authored
While the pages can't be swapped out, they can be discarded by the shrinker. Normally such objects are marked with __I915_MADV_PURGED, which can't be unset, and therefore requires a new object. For kernel internal objects this is not true, since the madv hint is reset for our special volatile objects, such that we can re-acquire new pages, if so desired, without needing a new object. As a result we should probably be paranoid here and put the object back into the CPU domain when discarding the pages, and also correctly set cache_dirty, if required. Signed-off-by:
-
Matthew Auld authored
Add some details around non-LLC platforms and cflushing, when dealing with the flush-on-acquire, which is potentially security sensitive. Signed-off-by:
-
Matthew Auld authored
On non-LLC platforms, force the flush-on-acquire if this is ever swapped-in. Our async flush path is not trust worthy enough yet(and happens in the wrong order), and with some tricks it's conceivable for userspace to change the cache-level to I915_CACHE_NONE after the pages are swapped-in, and since execbuf binds the object before doing the async flush, there is a potential race window. Signed-off-by:
-
Matthew Auld authored
Even though userptr objects are always coherent with the GPU, with no way for userspace to change this with the set_caching ioctl, even on non-LLC platforms, there is still the 'Bypass LCC' mocs setting, which might permit reading the contents of main memory directly. Signed-off-by:
-
Matthew Auld authored
As pointed out by Thomas, we likely need to flush the pages here if the GPU can read the page contents directly from main memory. Underneath we don't know what the sg_table is pointing to, so just add a wbinvd_on_all_cpus() here, for now. Reported-by:
-
Matthew Auld authored
It looks like we will need this in some more places, so extract as a helper. Signed-off-by:
-
Matthew Auld authored
These are userspace objects, so mark them as such. In a later patch it's useful to determine how paranoid we need to be when managing cache flushes. In theory no functional changes. Signed-off-by:
-
Matthew Auld authored
These are userspace objects, so mark them as such. In a later patch it's useful to determine how paranoid we need to be when managing cache flushes. In theory no functional changes. Signed-off-by:
-
Christian König authored
Simplifying the code a bit. Signed-off-by:
-
Christian König authored
Simplifying the code a bit. Also drop the RCU read side lock since the object is locked anyway. Untested since I can't get the driver to compile on !ARM. Signed-off-by:
-
Christian König authored
No need to actually allocate an array of fences here. Signed-off-by:
-
Ran Jianping authored
'drm/ttm/ttm_placement.h' included in 'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated. It is also included on the 9 line. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ran Jianping <ran.jianping@zte.com.cn> Reviewed-by:
-
- 19 Oct, 2021 9 commits
-
-
Maxime Ripard authored
Merge tag 'topic/drm-dp-training-delay-helpers-2021-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next Core Changes: - drm dp helpers for figuring out link training delays Signed-off-by:
-
Christian König authored
Trivial fix since we now need to grab a reference to the fence we have added. Previously the dma_resv function where doing that for us. Signed-off-by:
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> References: https://lore.kernel.org/dri-devel/2023306.UmlnhvANQh@archbook/Tested-by:
-
Stephen Rothwell authored
Commit cd06ab2f ("drm/locking: add backtrace for locking contended locks without backoff") added functions named __stack_depot_* in drm which conflict with stack depot. Rename to __drm_stack_depot_*. v2 by Jani: - Also rename __stack_depot_print References: https://lore.kernel.org/r/20211015202648.258445ef@canb.auug.org.au Fixes: cd06ab2f ("drm/locking: add backtrace for locking contended locks without backoff") Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018085113.27033-1-jani.nikula@intel.com
-
Dmitry Osipenko authored
TXTAGOCNT and RXTASURECNT bitfields of BTACNTRL1 register are swapped in the code, correct them. Driver doesn't implement low power mode for now, so this change doesn't make a practical difference yet. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Dmitry Osipenko authored
Non-continuous clock mode doesn't work because driver doesn't support it properly. The bridge driver programs wrong bitfields that are required by the non-continuous mode (BTACNTRL1 register bitfields are swapped in the code), but fixing them doesn't help. Display panel of ASUS Transformer TF700T tablet supports non-continuous mode and display doesn't work at all using that mode. There are no device-trees that are actively using this DSI bridge in upstream yet, so clearly the broken mode wasn't ever tested properly. It's a bit too difficult to get LP mode working, hence let's disable the offending mode for now and fall back to continuous mode. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T Signed-off-by:
-
Dmitry Osipenko authored
Calculate video start delay based on the display timing instead of hardcoding it to a default value. This fixes "trembling" display output on Asus Transformer TF700T which uses Panasonic VVX10F004B00 display panel. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T Signed-off-by:
-
Dmitry Osipenko authored
Support pulse-mode synchronization which is supported and used by simple DSI panels like Panasonic VVX10F004B00. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T Signed-off-by:
-
Dmitry Osipenko authored
The driver assumes that reference clock is always-enabled, but this is hardware-dependent and not true for ASUS Transformer TF700T. Make driver enable / disable the reference clock. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T Signed-off-by:
-
Thomas Zimmermann authored
struct gtt_range represents a GEM object. Rename the structure to struct psb_gem_object and update all users. No functional changes. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-11-tzimmermann@suse.de
-
