Skip to content

L
linux
Switch branch/tag
  1. 05 Apr, 2019 20 commits
    • Linus Torvalds's avatar
      iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver · 3e8d6221
      Linus Torvalds authored 
      [ Upstream commit e0f0ae83 ]

The pm8xxx_get_channel() implementation is unclear, and causes gcc to
suddenly generate odd warnings.  The trigger for the warning (at least
for me) was the entirely unrelated commit 79a4e91d ("device.h: Add
__cold to dev_<level> logging functions"), which apparently changes gcc
code generation in the caller function enough to cause this:

  drivers/iio/adc/qcom-pm8xxx-xoadc.c: In function ‘pm8xxx_xoadc_probe’:
  drivers/iio/adc/qcom-pm8xxx-xoadc.c:633:8: warning: ‘ch’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
             &read_nomux_rsv4, true);
             ~~~~~~~~~~~~~~~~~~~~~~~
  drivers/iio/adc/qcom-pm8xxx-xoadc.c:426:27: note: ‘ch’ was declared here
    struct pm8xxx_chan_info *ch;
                             ^~

because gcc for some reason then isn't able to see that the termination
condition for the "for( )" loop in that function is also the condition
for returning NULL.

So it's not _actually_ uninitialized, but the function is admittedly
just unnecessarily oddly written.

Simplify and clarify the function, making gcc also see that it always
returns a valid initialized value.

Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      3e8d6221
    • Xiang Chen's avatar
      scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO · e27cced3
      Xiang Chen authored 
      [ Upstream commit 47905957 ]

For internal IO and SMP IO, there is a time-out timer for them. In the
timer handler, it checks whether IO is done according to the flag
task->task_state_lock.

There is an issue which may cause system suspended: internal IO or SMP IO
is sent, but at that time because of hardware exception (such as inject
2Bit ECC error), so IO is not completed and also not timeout. But, at that
time, the SAS controller reset occurs to recover system. It will release
the resource and set the status of IO to be SAS_TASK_STATE_DONE, so when IO
timeout, it will never complete the completion of IO and wait for ever.

[  729.123632] Call trace:
[  729.126791] [<ffff00000808655c>] __switch_to+0x94/0xa8
[  729.133106] [<ffff000008d96e98>] __schedule+0x1e8/0x7fc
[  729.138975] [<ffff000008d974e0>] schedule+0x34/0x8c
[  729.144401] [<ffff000008d9b000>] schedule_timeout+0x1d8/0x3cc
[  729.150690] [<ffff000008d98218>] wait_for_common+0xdc/0x1a0
[  729.157101] [<ffff000008d98304>] wait_for_completion+0x28/0x34
[  729.165973] [<ffff000000dcefb4>] hisi_sas_internal_task_abort+0x2a0/0x424 [hisi_sas_test_main]
[  729.176447] [<ffff000000dd18f4>] hisi_sas_abort_task+0x244/0x2d8 [hisi_sas_test_main]
[  729.185258] [<ffff000008971714>] sas_eh_handle_sas_errors+0x1c8/0x7b8
[  729.192391] [<ffff000008972774>] sas_scsi_recover_host+0x130/0x398
[  729.199237] [<ffff00000894d8a8>] scsi_error_handler+0x148/0x5c0
[  729.206009] [<ffff0000080f4118>] kthread+0x10c/0x138
[  729.211563] [<ffff0000080855dc>] ret_from_fork+0x10/0x18

To solve the issue, callback function task_done of those IOs need to be
called when on SAS controller reset.
Signed-off-by: default avatarXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      e27cced3
    • John Garry's avatar
      scsi: hisi_sas: Set PHY linkrate when disconnected · fce6aeaf
      John Garry authored 
      [ Upstream commit efdcad62 ]

When the PHY comes down, we currently do not set the negotiated linkrate:

root@(none)$ pwd
/sys/class/sas_phy/phy-0:0
root@(none)$ more enable
1
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$

This patch fixes the driver code to set it properly when the PHY comes
down.

If the PHY had been enabled, then set unknown; otherwise, flag as disabled.

The logical place to set the negotiated linkrate for this scenario is PHY
down routine, which is called from the PHY down ISR.

However, it is not possible to know if the PHY comes down due to PHY
disable or loss of link, as sas_phy.enabled member is not set until after
the transport disable routine is complete, which races with the PHY down
ISR.

As an imperfect solution, use sas_phy_data.enable as the flag to know if
the PHY is down due to disable. It's imperfect, as sas_phy_data is internal
to libsas.

I can't see another way without adding a new field to hisi_sas_phy and
managing it, or changing SCSI SAS transport.
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      fce6aeaf
    • Stanislav Fomichev's avatar
      libbpf: force fixdep compilation at the start of the build · e21f655c
      Stanislav Fomichev authored 
      [ Upstream commit 8e268887 ]

libbpf targets don't explicitly depend on fixdep target, so when
we do 'make -j$(nproc)', there is a high probability, that some
objects will be built before fixdep binary is available.

Fix this by running sub-make; this makes sure that fixdep dependency
is properly accounted for.

For the same issue in perf, see commit abb26210 ("perf tools: Force
fixdep compilation at the start of the build").

Before:

$ rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld -C tools/lib/bpf/

Auto-detecting system features:
...                        libelf: [ on  ]
...                           bpf: [ on  ]

  HOSTCC   /tmp/bld/fixdep.o
  CC       /tmp/bld/libbpf.o
  CC       /tmp/bld/bpf.o
  CC       /tmp/bld/btf.o
  CC       /tmp/bld/nlattr.o
  CC       /tmp/bld/libbpf_errno.o
  CC       /tmp/bld/str_error.o
  CC       /tmp/bld/netlink.o
  CC       /tmp/bld/bpf_prog_linfo.o
  CC       /tmp/bld/libbpf_probes.o
  CC       /tmp/bld/xsk.o
  HOSTLD   /tmp/bld/fixdep-in.o
  LINK     /tmp/bld/fixdep
  LD       /tmp/bld/libbpf-in.o
  LINK     /tmp/bld/libbpf.a
  LINK     /tmp/bld/libbpf.so
  LINK     /tmp/bld/test_libbpf

$ head /tmp/bld/.libbpf.o.cmd
 # cannot find fixdep (/usr/local/google/home/sdf/src/linux/xxx//fixdep)
 # using basic dep data

/tmp/bld/libbpf.o: libbpf.c /usr/include/stdc-predef.h \
 /usr/include/stdlib.h /usr/include/features.h \
 /usr/include/x86_64-linux-gnu/sys/cdefs.h \
 /usr/include/x86_64-linux-gnu/bits/wordsize.h \
 /usr/include/x86_64-linux-gnu/gnu/stubs.h \
 /usr/include/x86_64-linux-gnu/gnu/stubs-64.h \
 /usr/lib/gcc/x86_64-linux-gnu/7/include/stddef.h \

After:

$ rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld -C tools/lib/bpf/

Auto-detecting system features:
...                        libelf: [ on  ]
...                           bpf: [ on  ]

  HOSTCC   /tmp/bld/fixdep.o
  HOSTLD   /tmp/bld/fixdep-in.o
  LINK     /tmp/bld/fixdep
  CC       /tmp/bld/libbpf.o
  CC       /tmp/bld/bpf.o
  CC       /tmp/bld/nlattr.o
  CC       /tmp/bld/btf.o
  CC       /tmp/bld/libbpf_errno.o
  CC       /tmp/bld/str_error.o
  CC       /tmp/bld/netlink.o
  CC       /tmp/bld/bpf_prog_linfo.o
  CC       /tmp/bld/libbpf_probes.o
  CC       /tmp/bld/xsk.o
  LD       /tmp/bld/libbpf-in.o
  LINK     /tmp/bld/libbpf.a
  LINK     /tmp/bld/libbpf.so
  LINK     /tmp/bld/test_libbpf

$ head /tmp/bld/.libbpf.o.cmd
cmd_/tmp/bld/libbpf.o := gcc -Wp,-MD,/tmp/bld/.libbpf.o.d -Wp,-MT,/tmp/bld/libbpf.o -g -Wall -DHAVE_LIBELF_MMAP_SUPPORT -DCOMPAT_NEED_REALLOCARRAY -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wshadow -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Werror -Wall -fPIC -I. -I/usr/local/google/home/sdf/src/linux/tools/include -I/usr/local/google/home/sdf/src/linux/tools/arch/x86/include/uapi -I/usr/local/google/home/sdf/src/linux/tools/include/uapi -fvisibility=hidden -D"BUILD_STR(s)=$(pound)s" -c -o /tmp/bld/libbpf.o libbpf.c

source_/tmp/bld/libbpf.o := libbpf.c

deps_/tmp/bld/libbpf.o := \
  /usr/include/stdc-predef.h \
  /usr/include/stdlib.h \
  /usr/include/features.h \
  /usr/include/x86_64-linux-gnu/sys/cdefs.h \
  /usr/include/x86_64-linux-gnu/bits/wordsize.h \

Fixes: 7c422f55 ("tools build: Build fixdep helper from perf and basic libs")
Reported-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarStanislav Fomichev <sdf@google.com>
Acked-by: default avatarYonghong Song <yhs@fb.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      e21f655c
    • Arnd Bergmann's avatar
      enic: fix build warning without CONFIG_CPUMASK_OFFSTACK · 60483306
      Arnd Bergmann authored 
      [ Upstream commit 43d28166 ]

The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to
dynamically allocate a struct member, but this is normally intended for
local variables.

Building with clang, I get a warning for a few locations that check the
address of the cpumask_var_t:

drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]

As far as I can tell, the code is still correct, as the truth value of
the pointer is what we need in this configuration. To get rid of
the warning, use cpumask_available() instead of checking the
pointer directly.

Fixes: 322cf7e3 ("enic: assign affinity hint to interrupts")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      60483306
    • Nathan Chancellor's avatar
      net: stmmac: Avoid sometimes uninitialized Clang warnings · 9ec4860d
      Nathan Chancellor authored 
      [ Upstream commit df103170 ]

When building with -Wsometimes-uninitialized, Clang warns:

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]

Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_timestamp and stmmac_config_sub_second_increment wrap),
as it may fail to initialize these values if the if condition was ever
false (meaning the callbacks don't exist). It's not wrong because the
callbacks (get_timestamp and config_sub_second_increment respectively)
are the ones that initialize the variables. While it's unlikely that the
callbacks are ever going to disappear and make that condition false, we
can easily avoid this warning by zero initialize the variables.

Link: https://github.com/ClangBuiltLinux/linux/issues/384Suggested-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      9ec4860d
    • Christian Brauner's avatar
      sysctl: handle overflow for file-max · b227f157
      Christian Brauner authored 
      [ Upstream commit 32a5ad9c ]

Currently, when writing

  echo 18446744073709551616 > /proc/sys/fs/file-max

/proc/sys/fs/file-max will overflow and be set to 0.  That quickly
crashes the system.

This commit sets the max and min value for file-max.  The max value is
set to long int.  Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.

Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax().  This function does not report error when
min or max are exceeded.  Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept.  There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded.  However this has the potential to break
userspace so let's defer this to an RFC patch.

Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.ioSigned-off-by: default avatarChristian Brauner <christian@brauner.io>
Acked-by: default avatarKees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Waiman Long <longman@redhat.com>
[christian@brauner.io: v4]
  Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.ioSigned-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b227f157
    • Luc Van Oostenryck's avatar
      include/linux/relay.h: fix percpu annotation in struct rchan · d6ad08aa
      Luc Van Oostenryck authored 
      [ Upstream commit 62461ac2 ]

The percpu member of this structure is declared as:
	struct ... ** __percpu member;
So its type is:
	__percpu pointer to pointer to struct ...

But looking at how it's used, its type should be:
	pointer to __percpu pointer to struct ...
and it should thus be declared as:
	struct ... * __percpu *member;

So fix the placement of '__percpu' in the definition of this
structures.

This silents a few Sparse's warnings like:
	warning: incorrect type in initializer (different address spaces)
	  expected void const [noderef] <asn:3> *__vpp_verify
	  got struct sched_domain **

Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com
Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Signed-off-by: default avatarLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d6ad08aa
    • Russell King's avatar
      gpio: gpio-omap: fix level interrupt idling · 4c96500e
      Russell King authored 
      [ Upstream commit d01849f7 ]

Tony notes that the GPIO module does not idle when level interrupts are
in use, as the wakeup appears to get stuck.

After extensive investigation, it appears that the wakeup will only be
cleared if the interrupt status register is cleared while the interrupt
is enabled. However, we are currently clearing it with the interrupt
disabled for level-based interrupts.

It is acknowledged that this observed behaviour conflicts with a
statement in the TRM:

CAUTION
  After servicing the interrupt, the status bit in the interrupt status
  register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be
  reset and the interrupt line released (by setting the corresponding
  bit of the interrupt status register to 1) before enabling an
  interrupt for the GPIO channel in the interrupt-enable register
  (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent
  the occurrence of unexpected interrupts when enabling an interrupt
  for the GPIO channel.

However, this does not appear to be a practical problem.

Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>,
the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP:
Fix the sequence to clear the IRQ status" saying:

 if the status is cleared after disabling the IRQ then sWAKEUP will not
 be cleared and gates the module transition

When we unmask the level interrupt after the interrupt has been handled,
enable the interrupt and only then clear the interrupt. If the interrupt
is still pending, the hardware will re-assert the interrupt status.

Should the caution note in the TRM prove to be a problem, we could
use a clear-enable-clear sequence instead.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: updated comments based on an earlier TI patch]
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Acked-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      4c96500e
    • Tonghao Zhang's avatar
      net/mlx5: Avoid panic when setting vport mac, getting vport config · 8c50ab86
      Tonghao Zhang authored 
      [ Upstream commit 6e77c413 ]

If we try to set VFs mac address on a VF (not PF) net device,
the kernel will be crash. The commands are show as below:

$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00

[exception RIP: mlx5_eswitch_set_vport_mac+41]
[ffffb8b7079e3688] do_setlink at ffffffff8f67f85b
[ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778
[ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63
[ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812
[ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab
[ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f
[ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412
[ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6
[ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860
[ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38
[ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b
[ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c

and

[exception RIP: mlx5_eswitch_get_vport_config+12]
[ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core]
[ffffa70607e57688] do_setlink at ffffffffbc67fa59
[ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778
[ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63
[ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812
[ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab
[ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f
[ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412
[ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6
[ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860
[ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38
[ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b
[ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c

Fixes: a8d70a05 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager")
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: default avatarTonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: default avatarRoi Dayan <roid@mellanox.com>
Acked-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8c50ab86
    • Tonghao Zhang's avatar
      net/mlx5: Avoid panic when setting vport rate · 3bddc614
      Tonghao Zhang authored 
      [ Upstream commit 24319258 ]

If we try to set VFs rate on a VF (not PF) net device, the kernel
will be crash. The commands are show as below:

$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1

If not applied the first patch ("net/mlx5: Avoid panic when setting
vport mac, getting vport config"), the command:

$ ip link set $MLX_VF0 vf 0 rate 100

can also crash the kernel.

[ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core]
[ 1650.007092]  do_setlink+0x982/0xd20
[ 1650.007129]  __rtnl_newlink+0x528/0x7d0
[ 1650.007374]  rtnl_newlink+0x43/0x60
[ 1650.007407]  rtnetlink_rcv_msg+0x2a2/0x320
[ 1650.007484]  netlink_rcv_skb+0xcb/0x100
[ 1650.007519]  netlink_unicast+0x17f/0x230
[ 1650.007554]  netlink_sendmsg+0x2d2/0x3d0
[ 1650.007592]  sock_sendmsg+0x36/0x50
[ 1650.007625]  ___sys_sendmsg+0x280/0x2a0
[ 1650.007963]  __sys_sendmsg+0x58/0xa0
[ 1650.007998]  do_syscall_64+0x5b/0x180
[ 1650.009438]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c9497c98 ("net/mlx5: Add support for setting VF min rate")
Cc: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: default avatarTonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: default avatarRoi Dayan <roid@mellanox.com>
Acked-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      3bddc614
    • Douglas Anderson's avatar
      tracing: kdb: Fix ftdump to not sleep · b73c7d02
      Douglas Anderson authored 
      [ Upstream commit 31b265b3 ]

As reported back in 2016-11 [1], the "ftdump" kdb command triggers a
BUG for "sleeping function called from invalid context".

kdb's "ftdump" command wants to call ring_buffer_read_prepare() in
atomic context.  A very simple solution for this is to add allocation
flags to ring_buffer_read_prepare() so kdb can call it without
triggering the allocation error.  This patch does that.

Note that in the original email thread about this, it was suggested
that perhaps the solution for kdb was to either preallocate the buffer
ahead of time or create our own iterator.  I'm hoping that this
alternative of adding allocation flags to ring_buffer_read_prepare()
can be considered since it means I don't need to duplicate more of the
core trace code into "trace_kdb.c" (for either creating my own
iterator or re-preparing a ring allocator whose memory was already
allocated).

NOTE: another option for kdb is to actually figure out how to make it
reuse the existing ftrace_dump() function and totally eliminate the
duplication.  This sounds very appealing and actually works (the "sr
z" command can be seen to properly dump the ftrace buffer).  The
downside here is that ftrace_dump() fully consumes the trace buffer.
Unless that is changed I'd rather not use it because it means "ftdump
| grep xyz" won't be very useful to search the ftrace buffer since it
will throw away the whole trace on the first grep.  A future patch to
dump only the last few lines of the buffer will also be hard to
implement.

[1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com

Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.orgReported-by: default avatarBrian Norris <briannorris@chromium.org>
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b73c7d02
    • Chao Yu's avatar
      f2fs: fix to avoid deadlock in f2fs_read_inline_dir() · d7391962
      Chao Yu authored 
      [ Upstream commit aadcef64 ]

As Jiqun Li reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202883

sometimes, dead lock when make system call SYS_getdents64 with fsync() is
called by another process.

monkey running on android9.0

1.  task 9785 held sbi->cp_rwsem and waiting lock_page()
2.  task 10349 held mm_sem and waiting sbi->cp_rwsem
3. task 9709 held lock_page() and waiting mm_sem

so this is a dead lock scenario.

task stack is show by crash tools as following

crash_arm64> bt ffffffc03c354080
PID: 9785   TASK: ffffffc03c354080  CPU: 1   COMMAND: "RxIoScheduler-3"
>> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8

crash-arm64> bt 10349
PID: 10349  TASK: ffffffc018b83080  CPU: 1   COMMAND: "BUGLY_ASYNC_UPL"
>> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc
     PC: 00000033  LR: 00000000  SP: 00000000  PSTATE: ffffffffffffffff

crash-arm64> bt 9709
PID: 9709   TASK: ffffffc03e7f3080  CPU: 1   COMMAND: "IntentService[A"
>> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc
>> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4
     PC: ffffff8008274114  [compat_filldir64+120]
     LR: ffffff80083584d4  [f2fs_fill_dentries+448]
     SP: ffffffc001e67b80  PSTATE: 80400145
    X29: ffffffc001e67b80  X28: 0000000000000000  X27: 000000000000001a
    X26: 00000000000093d7  X25: ffffffc070d52480  X24: 0000000000000008
    X23: 0000000000000028  X22: 00000000d43dfd60  X21: ffffffc001e67e90
    X20: 0000000000000011  X19: ffffff80093a4000  X18: 0000000000000000
    X17: 0000000000000000  X16: 0000000000000000  X15: 0000000000000000
    X14: ffffffffffffffff  X13: 0000000000000008  X12: 0101010101010101
    X11: 7f7f7f7f7f7f7f7f  X10: 6a6a6a6a6a6a6a6a   X9: 7f7f7f7f7f7f7f7f
     X8: 0000000080808000   X7: ffffff800827409c   X6: 0000000080808000
     X5: 0000000000000008   X4: 00000000000093d7   X3: 000000000000001a
     X2: 0000000000000011   X1: ffffffc070d52480   X0: 0000000000800238
>> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0
     PC: 0000003c  LR: 00000000  SP: 00000000  PSTATE: 000000d9
    X12: f48a02ff X11: d4678960 X10: d43dfc00  X9: d4678ae4
     X8: 00000058  X7: d4678994  X6: d43de800  X5: 000000d9
     X4: d43dfc0c  X3: d43dfc10  X2: d46799c8  X1: 00000000
     X0: 00001068

Below potential deadlock will happen between three threads:
Thread A		Thread B		Thread C
- f2fs_do_sync_file
 - f2fs_write_checkpoint
  - down_write(&sbi->node_change) -- 1)
			- do_page_fault
			 - down_write(&mm->mmap_sem) -- 2)
			  - do_wp_page
			   - f2fs_vm_page_mkwrite
						- getdents64
						 - f2fs_read_inline_dir
						  - lock_page -- 3)
  - f2fs_sync_node_pages
   - lock_page -- 3)
			    - __do_map_lock
			     - down_read(&sbi->node_change) -- 1)
						  - f2fs_fill_dentries
						   - dir_emit
						    - compat_filldir64
						     - do_page_fault
						      - down_read(&mm->mmap_sem) -- 2)

Since f2fs_readdir is protected by inode.i_rwsem, there should not be
any updates in inode page, we're safe to lookup dents in inode page
without its lock held, so taking off the lock to improve concurrency
of readdir and avoid potential deadlock.
Reported-by: default avatarJiqun Li <jiqun.li@unisoc.com>
Signed-off-by: default avatarChao Yu <yuchao0@huawei.com>
Signed-off-by: default avatarJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d7391962
    • Chao Yu's avatar
      f2fs: fix to adapt small inline xattr space in __find_inline_xattr() · 198c9985
      Chao Yu authored 
      [ Upstream commit 2c28aba8 ]

With below testcase, we will fail to find existed xattr entry:

1. mkfs.f2fs -O extra_attr -O flexible_inline_xattr /dev/zram0
2. mount -t f2fs -o inline_xattr_size=1 /dev/zram0 /mnt/f2fs/
3. touch /mnt/f2fs/file
4. setfattr -n "user.name" -v 0 /mnt/f2fs/file
5. getfattr -n "user.name" /mnt/f2fs/file

/mnt/f2fs/file: user.name: No such attribute

The reason is for inode which has very small inline xattr size,
__find_inline_xattr() will fail to traverse any entry due to first
entry may not be loaded from xattr node yet, later, we may skip to
check entire xattr datas in __find_xattr(), result in such wrong
condition.

This patch adds condition to check such case to avoid this issue.
Signed-off-by: default avatarChao Yu <yuchao0@huawei.com>
Signed-off-by: default avatarJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      198c9985
    • Masahiro Yamada's avatar
      h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- · 56bb66c5
      Masahiro Yamada authored 
      [ Upstream commit fc2b47b5 ]

It believe it is a bad idea to hardcode a specific compiler prefix
that may or may not be installed on a user's system. It is annoying
when testing features that should not require compilers at all.

For example, mrproper, headers_install, etc. should work without
any compiler.

They look like follows on my machine.

$ make ARCH=h8300 mrproper
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
make: h8300-unknown-linux-gcc: Command not found
  [ a bunch of the same error messages continue ]

$ make ARCH=h8300 headers_install
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
  HOSTCC  scripts/basic/fixdep
make: h8300-unknown-linux-gcc: Command not found
  WRAP    arch/h8300/include/generated/uapi/asm/kvm_para.h
  [ snip ]

The solution is to delete this line, or to use cc-cross-prefix like
some architectures do. I chose the latter as a moderate fixup.

I added an alternative 'h8300-linux-' because it is available at:

https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      56bb66c5
    • Aurelien Aptel's avatar
      CIFS: fix POSIX lock leak and invalid ptr deref · 2938651d
      Aurelien Aptel authored 
      [ Upstream commit bc31d0cd ]

We have a customer reporting crashes in lock_get_status() with many
"Leaked POSIX lock" messages preceeding the crash.

 Leaked POSIX lock on dev=0x0:0x56 ...
 Leaked POSIX lock on dev=0x0:0x56 ...
 Leaked POSIX lock on dev=0x0:0x56 ...
 Leaked POSIX lock on dev=0x0:0x53 ...
 Leaked POSIX lock on dev=0x0:0x53 ...
 Leaked POSIX lock on dev=0x0:0x53 ...
 Leaked POSIX lock on dev=0x0:0x53 ...
 POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709
 Leaked POSIX lock on dev=0x0:0x4b ino...
 Leaked locks on dev=0x0:0x4b ino=0xf911400000029:
 POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592
 stack segment: 0000 [#1] SMP
 Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4

 Supported: Yes
 CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
 task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000
 RIP: 0010:[<ffffffff8125dcab>]  [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0
 RSP: 0018:ffff88c74005fd90  EFLAGS: 00010202
 RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50
 RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae
 RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff
 R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340
 R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340
 FS:  00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Stack:
  0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18
  ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340
  ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28
 Call Trace:
  [<ffffffff8125e08f>] locks_show+0x2f/0x70
  [<ffffffff81230ad1>] seq_read+0x251/0x3a0
  [<ffffffff81275bbc>] proc_reg_read+0x3c/0x70
  [<ffffffff8120e456>] __vfs_read+0x26/0x140
  [<ffffffff8120e9da>] vfs_read+0x7a/0x120
  [<ffffffff8120faf2>] SyS_read+0x42/0xa0
  [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7

When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls
filp_close() which also removes all posix locks.

The lock struct is initialized like so in filp_close() and passed
down to cifs

	...
        lock.fl_type = F_UNLCK;
        lock.fl_flags = FL_POSIX | FL_CLOSE;
        lock.fl_start = 0;
        lock.fl_end = OFFSET_MAX;
	...

Note the FL_CLOSE flag, which hints the VFS code that this unlocking
is done for closing the fd.

filp_close()
  locks_remove_posix(filp, id);
    vfs_lock_file(filp, F_SETLK, &lock, NULL);
      return filp->f_op->lock(filp, cmd, fl) => cifs_lock()
        rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid);
          rc = server->ops->mand_unlock_range(cfile, flock, xid);
          if (flock->fl_flags & FL_POSIX && !rc)
                  rc = locks_lock_file_wait(file, flock)

Notice how we don't call locks_lock_file_wait() which does the
generic VFS lock/unlock/wait work on the inode if rc != 0.

If we are closing the handle, the SMB server is supposed to remove any
locks associated with it. Similarly, cifs.ko frees and wakes up any
lock and lock waiter when closing the file:

cifs_close()
  cifsFileInfo_put(file->private_data)
	/*
	 * Delete any outstanding lock records. We'll lose them when the file
	 * is closed anyway.
	 */
	down_write(&cifsi->lock_sem);
	list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) {
		list_del(&li->llist);
		cifs_del_lock_waiters(li);
		kfree(li);
	}
	list_del(&cifs_file->llist->llist);
	kfree(cifs_file->llist);
	up_write(&cifsi->lock_sem);

So we can safely ignore unlocking failures in cifs_lock() if they
happen with the FL_CLOSE flag hint set as both the server and the
client take care of it during the actual closing.

This is not a proper fix for the unlocking failure but it's safe and
it seems to prevent the lock leakages and crashes the customer
experiences.
Signed-off-by: default avatarAurelien Aptel <aaptel@suse.com>
Signed-off-by: default avatarNeilBrown <neil@brown.name>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
Acked-by: default avatarPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      2938651d
    • Razvan Stefanescu's avatar
      tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped · 442d5d17
      Razvan Stefanescu authored 
      commit 69646d7a upstream.

In half-duplex operation, RX should be started after TX completes.

If DMA is used, there is a case when the DMA transfer completes but the
TX FIFO is not emptied, so the RX cannot be restarted just yet.

Use a boolean variable to store this state and rearm TX interrupt mask
to be signaled again that the transfer finished. In interrupt transmit
handler this variable is used to start RX. A warning message is generated
if RX is activated before TX fifo is cleared.

Fixes: b389f173 ("tty/serial: atmel: RS485 half duplex w/DMA: enable
RX after TX is done")
Signed-off-by: default avatarRazvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: default avatarRichard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      442d5d17
    • Razvan Stefanescu's avatar
      tty/serial: atmel: Add is_half_duplex helper · b6b4bcb4
      Razvan Stefanescu authored 
      commit f3040983 upstream.

Use a helper function to check that a port needs to use half duplex
communication, replacing several occurrences of multi-line bit checking.

Fixes: b389f173 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarRazvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: default avatarRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b6b4bcb4
    • zhangyi (F)'s avatar
      ext4: cleanup bh release code in ext4_ind_remove_space() · 2dbc7c66
      zhangyi (F) authored 
      commit 5e86bdda upstream.

Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere.  It seems fragile and hard to read, and we
may probably forget to release the buffer some day.  This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: default avatarzhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Cc: Jari Ruusu <jari.ruusu@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2dbc7c66
    • Will Deacon's avatar
      arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals · bd62f1fe
      Will Deacon authored 
      commit b9a4b9d0 upstream.

FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by
taking a hardware watchpoint. Unfortunately, if a debug handler returns
a non-zero value, then we will propagate the UNKNOWN FAR value to
userspace via the si_addr field of the SIGTRAP siginfo_t.

Instead, let's set si_addr to take on the PC of the faulting instruction,
which we have available in the current pt_regs.

Cc: <stable@vger.kernel.org>
Reviewed-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bd62f1fe
  3. 03 Apr, 2019 20 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7