- 15 Jan, 2022 40 commits
-
-
Matthew Wilcox (Oracle) authored
dump_mapping() is a big chunk of dump_page(), and it'd be handy to be able to call it when we don't have a struct page. Split it out and move it to fs/inode.c. Take the opportunity to simplify some of the debug messages a little. Link: https://lkml.kernel.org/r/20211121121056.2870061-1-willy@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Konovalov authored
KASAN's quarantine might save its metadata inside freed objects. As this happens after the memory is zeroed by the slab allocator when init_on_free is enabled, the memory coming out of quarantine is not properly zeroed. This causes lib/test_meminit.c tests to fail with Generic KASAN. Zero the metadata when the object is removed from quarantine. Link: https://lkml.kernel.org/r/2805da5df4b57138fdacd671f5d227d58950ba54.1640037083.git.andreyknvl@google.com Fixes: 6471384a ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by:
-
Marco Elver authored
Add a test case for double-kmem_cache_destroy() detection. Link: https://lkml.kernel.org/r/20211119142219.1519617-2-elver@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Marco Elver authored
Because mm/slab_common.c is not instrumented with software KASAN modes, it is not possible to detect use-after-free of the kmem_cache passed into kmem_cache_destroy(). In particular, because of the s->refcount-- and subsequent early return if non-zero, KASAN would never be able to see the double-free via kmem_cache_free(kmem_cache, s). To be able to detect a double-kmem_cache_destroy(), check accessibility of the kmem_cache, and in case of failure return early. While KASAN_HW_TAGS is able to detect such bugs, by checking accessibility and returning early we fail more gracefully and also avoid corrupting reused objects (where tags mismatch). A recent case of a double-kmem_cache_destroy() was detected by KFENCE: https://lkml.kernel.org/r/0000000000003f654905c168b09d@google.com, which was not detectable by software KASAN modes. Link: https://lkml.kernel.org/r/20211119142219.1519617-1-elver@google.comSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
-
Marco Elver authored
Add a test checking that KASAN generic can also detect out-of-bounds accesses to the left of globals. Unfortunately it seems that GCC doesn't catch this (tested GCC 10, 11). The main difference between GCC's globals redzoning and Clang's is that GCC relies on using increased alignment to producing padding, where Clang's redzoning implementation actually adds real data after the global and doesn't rely on alignment to produce padding. I believe this is the main reason why GCC can't reliably catch globals out-of-bounds in this case. Given this is now a known issue, to avoid failing the whole test suite, skip this test case with GCC. Link: https://lkml.kernel.org/r/20211117130714.135656-1-elver@google.comSigned-off-by:
Kaiwan N Billimoria <kaiwan.billimoria@gmail.com> Reviewed-by:
-
Joao Martins authored
Use the newly added compound devmap facility which maps the assigned dax ranges as compound pages at a page size of @align. dax devices are created with a fixed @align (huge page size) which is enforced through as well at mmap() of the device. Faults, consequently happen too at the specified @align specified at the creation, and those don't change throughout dax device lifetime. MCEs unmap a whole dax huge page, as well as splits occurring at the configured page size. Performance measured by gup_test improves considerably for unpin_user_pages() and altmap with NVDIMMs: $ gup_test -f /dev/dax1.0 -m 16384 -r 10 -S -a -n 512 -w (pin_user_pages_fast 2M pages) put:~71 ms -> put:~22 ms [altmap] (pin_user_pages_fast 2M pages) get:~524ms put:~525 ms -> get: ~127ms put:~71ms $ gup_test -f /dev/dax1.0 -m 129022 -r 10 -S -a -n 512 -w (pin_user_pages_fast 2M pages) put:~513 ms -> put:~188 ms [altmap with -m 127004] (pin_user_pages_fast 2M pages) get:~4.1 secs put:~4.12 secs -> get:~1sec put:~563ms .. as well as unpin_user_page_range_dirty_lock() being just as effective as THP/hugetlb[0] pages. [0] https://lore.kernel.org/linux-mm/20210212130843.13865-5-joao.m.martins@oracle.com/ Link: https://lkml.kernel.org/r/20211202204422.26777-12-joao.m.martins@oracle.comSigned-off-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Joao Martins authored
After moving the page mapping to be set prior to pte insertion, the pfn in dev_dax_huge_fault() no longer is necessary. Remove it, as well as the @pfn argument passed to the internal fault handler helpers. [akpm@linux-foundation.org: fix CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=n build] Link: https://lkml.kernel.org/r/20211202204422.26777-11-joao.m.martins@oracle.comSigned-off-by:
Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Joao Martins authored
Normally, the @page mapping is set prior to inserting the page into a page table entry. Make device-dax adhere to the same ordering, rather than setting mapping after the PTE is inserted. The address_space never changes and it is always associated with the same inode and underlying pages. So, the page mapping is set once but cleared when the struct pages are removed/freed (i.e. after {devm_}memunmap_pages()). Link: https://lkml.kernel.org/r/20211202204422.26777-10-joao.m.martins@oracle.comSuggested-by:Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Joao Martins authored
Move initialization of page->mapping into a separate helper. This is in preparation to move the mapping set to be prior to inserting the page table entry and also for tidying up compound page handling into one helper. Link: https://lkml.kernel.org/r/20211202204422.26777-9-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Right now, only static dax regions have a valid @pgmap pointer in its struct dev_dax. Dynamic dax case however, do not. In preparation for device-dax compound devmap support, make sure that dev_dax pgmap field is set after it has been allocated and initialized. dynamic dax device have the @pgmap is allocated at probe() and it's managed by devm (contrast to static dax region which a pgmap is provided and dax core kfrees it). So in addition to ensure a valid @pgmap, clear the pgmap when the dynamic dax device is released to avoid the same pgmap ranges to be re-requested across multiple region device reconfigs. Add a static_dev_dax() and use that helper in dev_dax_probe() to ensure the initialization differences between dynamic and static regions are more explicit. While at it, consolidate the ranges initialization when we allocate the @pgmap for the dynamic dax region case. Also take the opportunity to document the differences between static and dynamic da regions. Link: https://lkml.kernel.org/r/20211202204422.26777-8-joao.m.martins@oracle.comSuggested-by:
-
Joao Martins authored
Use the struct_size() helper for the size of a struct with variable array member at the end, rather than manually calculating it. Link: https://lkml.kernel.org/r/20211202204422.26777-7-joao.m.martins@oracle.comSuggested-by:
-
Joao Martins authored
Rather than calculating @pgoff manually, switch to ALIGN() instead. Link: https://lkml.kernel.org/r/20211202204422.26777-6-joao.m.martins@oracle.comSuggested-by:
-
Joao Martins authored
Add a new @vmemmap_shift property for struct dev_pagemap which specifies that a devmap is composed of a set of compound pages of order @vmemmap_shift, instead of base pages. When a compound page devmap is requested, all but the first page are initialised as tail pages instead of order-0 pages. For certain ZONE_DEVICE users like device-dax which have a fixed page size, this creates an opportunity to optimize GUP and GUP-fast walkers, treating it the same way as THP or hugetlb pages. Additionally, commit 7118fc29 ("hugetlb: address ref count racing in prep_compound_gigantic_page") removed set_page_count() because the setting of page ref count to zero was redundant. devmap pages don't come from page allocator though and only head page refcount is used for compound pages, hence initialize tail page count to zero. Link: https://lkml.kernel.org/r/20211202204422.26777-5-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Move struct page init to an helper function __init_zone_device_page(). This is in preparation for sharing the storage for compound page metadata. Link: https://lkml.kernel.org/r/20211202204422.26777-4-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Patch series "mm, device-dax: Introduce compound pages in devmap", v7. This series converts device-dax to use compound pages, and moves away from the 'struct page per basepage on PMD/PUD' that is done today. Doing so 1) unlocks a few noticeable improvements on unpin_user_pages() and makes device-dax+altmap case 4x times faster in pinning (numbers below and in last patch) 2) as mentioned in various other threads it's one important step towards cleaning up ZONE_DEVICE refcounting. I've split the compound pages on devmap part from the rest based on recent discussions on devmap pending and future work planned[5][6]. There is consensus that device-dax should be using compound pages to represent its PMD/PUDs just like HugeTLB and THP, and that leads to less specialization of the dax parts. I will pursue the rest of the work in parallel once this part is merged, particular the GUP-{slow,fast} improvements [7] and the tail struct page deduplication memory savings part[8]. To summarize what the series does: Patch 1: Prepare hwpoisoning to work with dax compound pages. Patches 2-3: Split the current utility function of prep_compound_page() into head and tail and use those two helpers where appropriate to take advantage of caches being warm after __init_single_page(). This is used when initializing zone device when we bring up device-dax namespaces. Patches 4-10: Add devmap support for compound pages in device-dax. memmap_init_zone_device() initialize its metadata as compound pages, and it introduces a new devmap property known as vmemmap_shift which outlines how the vmemmap is structured (defaults to base pages as done today). The property describe the page order of the metadata essentially. While at it do a few cleanups in device-dax in patches 5-9. Finally enable device-dax usage of devmap @vmemmap_shift to a value based on its own @align property. @vmemmap_shift returns 0 by default (which is today's case of base pages in devmap, like fsdax or the others) and the usage of compound devmap is optional. Starting with device-dax (*not* fsdax) we enable it by default. There are a few pinning improvements particular on the unpinning case and altmap, as well as unpin_user_page_range_dirty_lock() being just as effective as THP/hugetlb[0] pages. $ gup_test -f /dev/dax1.0 -m 16384 -r 10 -S -a -n 512 -w (pin_user_pages_fast 2M pages) put:~71 ms -> put:~22 ms [altmap] (pin_user_pages_fast 2M pages) get:~524ms put:~525 ms -> get: ~127ms put:~71ms $ gup_test -f /dev/dax1.0 -m 129022 -r 10 -S -a -n 512 -w (pin_user_pages_fast 2M pages) put:~513 ms -> put:~188 ms [altmap with -m 127004] (pin_user_pages_fast 2M pages) get:~4.1 secs put:~4.12 secs -> get:~1sec put:~563ms Tested on x86 with 1Tb+ of pmem (alongside registering it with RDMA with and without altmap), alongside gup_test selftests with dynamic dax regions and static dax regions. Coupled with ndctl unit tests for dynamic dax devices that exercise all of this. Note, for dynamic dax regions I had to revert commit 8aa83e63 ("x86/setup: Call early_reserve_memory() earlier"), it is a known issue that this commit broke efi_fake_mem=. This patch (of 11): Split the utility function prep_compound_page() into head and tail counterparts, and use them accordingly. This is in preparation for sharing the storage for compound page metadata. Link: https://lkml.kernel.org/r/20211202204422.26777-1-joao.m.martins@oracle.com Link: https://lkml.kernel.org/r/20211202204422.26777-3-joao.m.martins@oracle.comSigned-off-by:Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Kefeng Wang authored
Yongqiang reports a kmemleak panic when module insmod/rmmod with KASAN enabled(without KASAN_VMALLOC) on x86[1]. When the module area allocates memory, it's kmemleak_object is created successfully, but the KASAN shadow memory of module allocation is not ready, so when kmemleak scan the module's pointer, it will panic due to no shadow memory with KASAN check. module_alloc __vmalloc_node_range kmemleak_vmalloc kmemleak_scan update_checksum kasan_module_alloc kmemleak_ignore Note, there is no problem if KASAN_VMALLOC enabled, the modules area entire shadow memory is preallocated. Thus, the bug only exits on ARCH which supports dynamic allocation of module area per module load, for now, only x86/arm64/s390 are involved. Add a VM_DEFER_KMEMLEAK flags, defer vmalloc'ed object register of kmemleak in module_alloc() to fix this issue. [1] https://lore.kernel.org/all/6d41e2b9-4692-5ec4-b1cd-cbe29ae89739@huawei.com/ [wangkefeng.wang@huawei.com: fix build] Link: https://lkml.kernel.org/r/20211125080307.27225-1-wangkefeng.wang@huawei.com [akpm@linux-foundation.org: simplify ifdefs, per Andrey] Link: https://lkml.kernel.org/r/CA+fCnZcnwJHUQq34VuRxpdoY6_XbJCDJ-jopksS5Eia4PijPzw@mail.gmail.com Link: https://lkml.kernel.org/r/20211124142034.192078-1-wangkefeng.wang@huawei.com Fixes: 793213a8 ("s390/kasan: dynamic shadow mem allocation for modules") Fixes: 39d114dd ("arm64: add KASAN support") Fixes: bebf56a1 ("kasan: enable instrumentation of global variables") Signed-off-by:Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by:
Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Calvin Zhang authored
Reserved regions with direct mapping may contain references to other regions. CMA region with fixed location is reserved without creating kmemleak_object for it. So add them as gray kmemleak objects. Link: https://lkml.kernel.org/r/20211123090641.3654006-1-calvinzhang.cool@gmail.comSigned-off-by:
Calvin Zhang <calvinzhang.cool@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuan-Ying Lee authored
With HW tag-based kasan enable, We will get the warning when we free object whose address starts with 0xFF. It is because kmemleak rbtree stores tagged object and this freeing object's tag does not match with rbtree object. In the example below, kmemleak rbtree stores the tagged object in the kmalloc(), and kfree() gets the pointer with 0xFF tag. Call sequence: ptr = kmalloc(size, GFP_KERNEL); page = virt_to_page(ptr); offset = offset_in_page(ptr); kfree(page_address(page) + offset); ptr = kmalloc(size, GFP_KERNEL); A sequence like that may cause the warning as following: 1) Freeing unknown object: In kfree(), we will get free unknown object warning in kmemleak_free(). Because object(0xFx) in kmemleak rbtree and pointer(0xFF) in kfree() have different tag. 2) Overlap existing: When we allocate that object with the same hw-tag again, we will find the overlap in the kmemleak rbtree and kmemleak thread will be killed. kmemleak: Freeing unknown object at 0xffff000003f88000 CPU: 5 PID: 177 Comm: cat Not tainted 5.16.0-rc1-dirty #21 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x1ac show_stack+0x1c/0x30 dump_stack_lvl+0x68/0x84 dump_stack+0x1c/0x38 kmemleak_free+0x6c/0x70 slab_free_freelist_hook+0x104/0x200 kmem_cache_free+0xa8/0x3d4 test_version_show+0x270/0x3a0 module_attr_show+0x28/0x40 sysfs_kf_seq_show+0xb0/0x130 kernfs_seq_show+0x30/0x40 seq_read_iter+0x1bc/0x4b0 seq_read_iter+0x1bc/0x4b0 kernfs_fop_read_iter+0x144/0x1c0 generic_file_splice_read+0xd0/0x184 do_splice_to+0x90/0xe0 splice_direct_to_actor+0xb8/0x250 do_splice_direct+0x88/0xd4 do_sendfile+0x2b0/0x344 __arm64_sys_sendfile64+0x164/0x16c invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x74/0x90 el0_svc+0x20/0x80 el0t_64_sync_handler+0x1a8/0x1b0 el0t_64_sync+0x1ac/0x1b0 ... kmemleak: Cannot insert 0xf2ff000003f88000 into the object search tree (overlaps existing) CPU: 5 PID: 178 Comm: cat Not tainted 5.16.0-rc1-dirty #21 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x1ac show_stack+0x1c/0x30 dump_stack_lvl+0x68/0x84 dump_stack+0x1c/0x38 create_object.isra.0+0x2d8/0x2fc kmemleak_alloc+0x34/0x40 kmem_cache_alloc+0x23c/0x2f0 test_version_show+0x1fc/0x3a0 module_attr_show+0x28/0x40 sysfs_kf_seq_show+0xb0/0x130 kernfs_seq_show+0x30/0x40 seq_read_iter+0x1bc/0x4b0 kernfs_fop_read_iter+0x144/0x1c0 generic_file_splice_read+0xd0/0x184 do_splice_to+0x90/0xe0 splice_direct_to_actor+0xb8/0x250 do_splice_direct+0x88/0xd4 do_sendfile+0x2b0/0x344 __arm64_sys_sendfile64+0x164/0x16c invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x74/0x90 el0_svc+0x20/0x80 el0t_64_sync_handler+0x1a8/0x1b0 el0t_64_sync+0x1ac/0x1b0 kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xf2ff000003f88000 (size 128): kmemleak: comm "cat", pid 177, jiffies 4294921177 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: kmem_cache_alloc+0x23c/0x2f0 test_version_show+0x1fc/0x3a0 module_attr_show+0x28/0x40 sysfs_kf_seq_show+0xb0/0x130 kernfs_seq_show+0x30/0x40 seq_read_iter+0x1bc/0x4b0 kernfs_fop_read_iter+0x144/0x1c0 generic_file_splice_read+0xd0/0x184 do_splice_to+0x90/0xe0 splice_direct_to_actor+0xb8/0x250 do_splice_direct+0x88/0xd4 do_sendfile+0x2b0/0x344 __arm64_sys_sendfile64+0x164/0x16c invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x74/0x90 kmemleak: Automatic memory scanning thread ended [akpm@linux-foundation.org: whitespace tweak] Link: https://lkml.kernel.org/r/20211118054426.4123-1-Kuan-Ying.Lee@mediatek.comSigned-off-by:Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Muchun Song authored
There is no external users of slab_start/next/stop(), so make them static. And the memory.kmem.slabinfo is deprecated, which outputs nothing now, so move memcg_slab_show() into mm/memcontrol.c and rename it to mem_cgroup_slab_show to be consistent with other function names. Link: https://lkml.kernel.org/r/20211109133359.32881-1-songmuchun@bytedance.comSigned-off-by:
-
Marco Elver authored
Calling kmem_cache_destroy() while the cache still has objects allocated is a kernel bug, and will usually result in the entire cache being leaked. While the message in kmem_cache_destroy() resembles a warning, it is currently not implemented using a real WARN(). This is problematic for infrastructure testing the kernel, all of which rely on the specific format of WARN()s to pick up on bugs. Some 13 years ago this used to be a simple WARN_ON() in slub, but commit d629d819 ("slub: improve kmem_cache_destroy() error message") changed it into an open-coded warning to avoid confusion with a bug in slub itself. Instead, turn the open-coded warning into a real WARN() with the message preserved, so that test systems can actually identify these issues, and we get all the other benefits of using a normal WARN(). The warning message is extended with "when called from <caller-ip>" to make it even clearer where the fault lies. For most configurations this is only a cosmetic change, however, note that WARN() here will now also respect panic_on_warn. Link: https://lkml.kernel.org/r/20211102170733.648216-1-elver@google.comSigned-off-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Amit Daniel Kachhap authored
__user annotations are used by the checker (e.g sparse) to mark user pointers. However here __user is applied to a struct directly, without a pointer being directly involved. Although the presence of __user does not cause sparse to emit a warning, __user should be removed for consistency with other uses of offsetof(). Note: No functional changes intended. Link: https://lkml.kernel.org/r/20211122101256.7875-1-amit.kachhap@arm.comSigned-off-by:
Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Cc: Kevin Brodsky <Kevin.Brodsky@arm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Colin Ian King authored
The variable 'free_space' is being initialized with a value that is not read, it is being re-assigned later in the two paths of an if statement. The early initialization is redundant and can be removed. Link: https://lkml.kernel.org/r/20220112230411.1090761-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Greg Kroah-Hartman authored
There are currently two ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ocfs2 cluster sysfs code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lkml.kernel.org/r/20220106102028.3345634-1-gregkh@linuxfoundation.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Colin Ian King authored
The variable 'root_bh' is being initialized with a value that is not read, it is being re-assigned later on closer to its use. The early initialization is redundant and can be removed. Link: https://lkml.kernel.org/r/20211228013719.620923-1-colin.i.king@gmail.comSigned-off-by:
-
Greg Kroah-Hartman authored
There are currently two ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ocfs2 code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lkml.kernel.org/r/20211228144517.391660-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Joseph Qi authored
ocfs2_grab_pages_for_write() may return -EAGAIN if write context type is mmap and it could not lock the target page. In this case, we exit with no error and no target page. And then trigger the caller page_mkwrite() to retry. Since there are other caller types, e.g. buffer and direct io, make the return value handling more clear. Link: https://lkml.kernel.org/r/20211206065051.103353-1-joseph.qi@linux.alibaba.comSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Zhang Mingyu authored
This issue was detected with the help of Coccinelle. Link: https://lkml.kernel.org/r/20211105014424.75372-1-zhang.mingyu@zte.com.cnSigned-off-by:
Zhang Mingyu <zhang.mingyu@zte.com.cn> Reported-by:
Zeal Robot <zealci@zte.com.cn> Acked-by:
-
Zheng Liang authored
Commit c1f6925e ("mm: put readahead pages in cache earlier") causes the read performance of squashfs to deteriorate.Through testing, we find that the performance will be back by closing the readahead of squashfs. So we want to learn the way of ubifs, provides backing_dev_info and disable read-ahead We tested the following data by fio. squashfs image blocksize=128K test command: fio --name basic --bs=? --filename="/mnt/test_file" --rw=? --iodepth=1 --ioengine=psync --runtime=200 --time_based turn on squashfs readahead in 5.10 kernel bs(k) read/randread MB/s 4 randread 271 128 randread 231 1024 randread 246 4 read 310 128 read 245 1024 read 247 turn off squashfs readahead in 5.10 kernel bs(k) read/randread MB/s 4 randread 293 128 randread 330 1024 randread 363 4 read 338 128 read 360 1024 read 365 turn on squashfs readahead and revert the commit c1f6925e("mm: put readahead pages in cache earlier") in 5.10 kernel bs(k) read/randread MB/s 4 randread 289 128 randread 306 1024 randread 335 4 read 337 128 read 336 1024 read 338 Link: https://lkml.kernel.org/r/20211116113141.1391026-1-zhengliang6@huawei.comSigned-off-by:
Zheng Liang <zhengliang6@huawei.com> Reviewed-by:
Phillip Lougher <phillip@squashfs.org.uk> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: Hou Tao <houtao1@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Signed-off-by:
-
Yang Li authored
The comments for the file should not be in kernel-doc format: /** * attrib.c - NTFS attribute operations. Part of the Linux-NTFS as it causes it to be incorrectly identified for function ntfs_map_runlist_nolock(), causing some warnings found by running scripts/kernel-doc.: fs/ntfs/attrib.c:25: warning: Incorrect use of kernel-doc format: * ntfs_map_runlist_nolock - map (a part of) a runlist of an ntfs inode fs/ntfs/attrib.c:71: warning: Function parameter or member 'ni' not described in 'ntfs_map_runlist_nolock' fs/ntfs/attrib.c:71: warning: Function parameter or member 'vcn' not described in 'ntfs_map_runlist_nolock' fs/ntfs/attrib.c:71: warning: Function parameter or member 'ctx' not described in 'ntfs_map_runlist_nolock' fs/ntfs/attrib.c:71: warning: expecting prototype for attrib.c - NTFS attribute operations. Part of the Linux(). Prototype was for ntfs_map_runlist_nolock() instead Link: https://lkml.kernel.org/r/20220106015145.67067-1-yang.lee@linux.alibaba.comSigned-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by:
-
Drew Fustini authored
Add typo "oveflow" for "overflow". This typo was found and fixed in tools/testing/selftests/bpf/prog_tests/btf_dump.c Link: https://lore.kernel.org/all/20211122070528.837806-1-dfustini@baylibre.com/ Link: https://lkml.kernel.org/r/20211122072302.839102-1-dfustini@baylibre.comSigned-off-by:
Drew Fustini <dfustini@baylibre.com> Suggested-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Colin Ian King <colin.king@intel.com> Cc: Drew Fustini <dfustini@baylibre.com> Cc: zuoqilin <zuoqilin@yulong.com> Cc: Tom Saeger <tom.saeger@oracle.com> Cc: Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
There are currently two ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ia64 topology sysfs code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lkml.kernel.org/r/20220104154800.1287947-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Jason Wang authored
The double `the' in a comment is repeated, thus it should be removed. Link: https://lkml.kernel.org/r/20211113030316.22650-1-wangborong@cdjrlc.comSigned-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Link: https://lkml.kernel.org/r/20211104001908.695110-1-yang.guang5@zte.com.cnReported-by:
Yang Guang <yang.guang5@zte.com.cn> Cc: David Yang <davidcomponentone@gmail.com> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Link: https://lkml.kernel.org/r/20211104062642.1506539-1-yang.guang5@zte.com.cnSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create_on_cpu/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-7-caihuoqing@baidu.comSigned-off-by:
Cai Huoqing <caihuoqing@baidu.com> Cc: Bernard Metzler <bmt@zurich.ibm.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Cai Huoqing authored
Replace kthread_create_on_cpu/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-6-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create_on_node/kthread_bind/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-5-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create/kthread_bind/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-4-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create/kthread_bind/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-3-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Add a new helper function kthread_run_on_cpu(), which includes kthread_create_on_cpu/wake_up_process(). In some cases, use kthread_run_on_cpu() directly instead of kthread_create_on_node/kthread_bind/wake_up_process() or kthread_create_on_cpu/wake_up_process() or kthreadd_create/kthread_bind/wake_up_process() to simplify the code. [akpm@linux-foundation.org: export kthread_create_on_cpu to modules] Link: https://lkml.kernel.org/r/20211022025711.3673-2-caihuoqing@baidu.comSigned-off-by:
-
