- 04 Oct, 2018 40 commits
-
-
Sakari Ailus authored
Print bus type either as set by the driver or as parsed from the bus-type property, as well as the guessed V4L2 media bus type. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
The caller may provide default flags for the endpoint. Change the configuration based on what is available through the fwnode property API. Signed-off-by:
-
Sakari Ailus authored
Use the media bus types instead of the fwnode bus types internally. This is the interface to the drivers as well, making the use of the fwnode bus types more localised to the V4L2 fwnode framework. Signed-off-by:
-
Sakari Ailus authored
In order to prepare for allowing drivers to set the defaults for a given bus, make zeroing the struct conditional based on detecting the bus. All callers now set the bus type to zero which allows only zeroing the remaining bus union. Signed-off-by:
-
Sakari Ailus authored
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by:
-
Sakari Ailus authored
Parsing the graph endpoint is always successful; therefore parse it as last. Signed-off-by:
-
Sakari Ailus authored
Most hardware doesn't support re-mapping of the CSI-2 lanes. Especially sensor drivers have a default number of lanes. Instead of requiring the caller (the driver) to provide such a unit mapping, provide one if no mapping is configured. Signed-off-by:
-
Sakari Ailus authored
Make use of the default CSI-2 lane mapping from caller-passed configuration. Signed-off-by:
-
Sakari Ailus authored
Only assign endpoint configuration if the endpoint is parsed successfully. Signed-off-by:
-
Sakari Ailus authored
Read the lane inversion independently of whether the "data-lanes" property exists. This makes sense since the caller may pass the number of lanes as the default configuration while the lane inversion configuration may still be available in firmware. Signed-off-by:
-
Sakari Ailus authored
Add support for parsing CSI-2 D-PHY, parallel or Bt.656 bus explicitly. Signed-off-by:
-
Sakari Ailus authored
In case the device supports multiple video bus types on an endpoint, the V4L2 fwnode framework attempts to detect the type based on the available information. This wasn't working really well, and sometimes could lead to the V4L2 fwnode endpoint struct as being mishandled between the bus types. Default to Bt.656 if no properties suggesting a bus type are found. Signed-off-by:
-
Sakari Ailus authored
Instead of allocating the V4L2 fwnode endpoint in v4l2_fwnode_endpoint_alloc_parse, let the caller to do this. This allows setting default parameters for the endpoint which is a very common need for drivers. Signed-off-by:
-
Sakari Ailus authored
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by:
-
Sakari Ailus authored
Add definitions corresponding to DT bindings to the CSI-2 D-PHY, parallel and Bt.656 busses. Signed-off-by:
-
Sakari Ailus authored
Allow specifying the bus type explicitly for MIPI D-PHY, parallel and Bt.656 busses. This is useful for devices that can make use of different bus types. There are CSI-2 transmitters and receivers but the PHY selection needs to be made between C-PHY and D-PHY; many devices also support parallel and Bt.656 interfaces but the means to pass that information to software wasn't there. Autodetection (value 0) is removed as an option as the property could be simply omitted in that case. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Sakari Ailus authored
The continuous clock flag was only set if there was a clock or data lanes. This isn't needed as such a configuration is invalid to begin with. Always set the continuous clock flag if the non-continuous property is not found. Signed-off-by:
-
Sakari Ailus authored
Use fwnode_graph_for_each_endpoint iterator for better readability. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by:
-
Sakari Ailus authored
Print debug info as standard V4L2 endpoint are parsed. Signed-off-by:
-
Steve Longerbeam authored
Update the doc to describe the new method of adding subdevice descriptors to async notifiers. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Steve Longerbeam authored
All platform drivers have been converted to use v4l2_async_notifier_add_subdev(), in place of adding asd's to the notifier subdevs array. So the subdevs array can now be removed from struct v4l2_async_notifier, and remove the backward compatibility support for that array in v4l2-async.c. Signed-off-by:
-
Steve Longerbeam authored
Switch all media platform drivers to call v4l2_async_notifier_add_subdev() to add asd's to a notifier, in place of referencing the notifier->subdevs[] array. These drivers also must now call v4l2_async_notifier_init() before adding asd's to their notifiers. There may still be cases where a platform driver maintains a list of asd's that is a duplicate of the notifier asd_list, in which case its possible the platform driver list can be removed, and can reference the notifier asd_list instead. One example of where a duplicate list has been removed in this patch is xilinx-vipp.c. If there are such cases remaining, those drivers should be optimized to remove the duplicate platform driver asd lists. None of the changes to the platform drivers in this patch have been tested. Verify that the async subdevices needed by the platform are bound at load time, and that the driver unloads and reloads correctly with no memory leaking of asd objects. Suggested-by:
-
Steve Longerbeam authored
The move to subdev notifiers fixes one assumption of OF graph parsing. If a subdevice has non-video related ports, the subdev driver knows not to follow those ports when adding remote devices to its subdev notifier. Signed-off-by:
-
Steve Longerbeam authored
Switch to v4l2_async_notifier_add_*_subdev() when adding async subdevs to the imx-media root notifier. This removes the need to check for an already added asd, since v4l2_async_notifier_add_*_subdev() does this check. Also no need to allocate a subdevs array when registering the root notifier, or keeping an internal master asd_list, since this is moved to the notifier's asd_list. Signed-off-by:
-
Steve Longerbeam authored
Rename the imx-media root async notifier from "subdev_notifier" to simply "notifier", so as not to confuse it with true subdev notifiers. No functional changes. Signed-off-by:
-
Steve Longerbeam authored
The root imx-media notifier no longer sees all bound subdevices because some of them will be bound to subdev notifiers. So imx_media_create_links() now needs to loop through all subdevices registered with the v4l2-device, not just the ones in the root notifier's done list. This should be safe because imx_media_create_of_links() checks if a fwnode link already exists before creating. Signed-off-by:
-
Steve Longerbeam authored
After moving to subdev notifiers, it's no longer necessary to recursively walk the OF graph, because the subdev notifiers will discover and add devices from the graph for us. So the recursive of_parse_subdev() function is gone, replaced with of_add_csi() which adds only the CSI port fwnodes to the imx-media root notifier. Signed-off-by:
-
Steve Longerbeam authored
Parse neighbor remote devices on the MIPI CSI-2 input port, add them to a subdev notifier, and register the subdev notifier for the MIPI CSI-2 receiver, by calling v4l2_async_register_fwnode_subdev(). csi2_parse_endpoints() is modified to be the parse_endpoint callback. Signed-off-by:
-
Steve Longerbeam authored
Parse neighbor remote devices on the CSI port, and add them to a subdev notifier, by calling v4l2_async_notifier_parse_fwnode_endpoints_by_port() using the CSI's port id. And register the subdev notifier for the CSI. Signed-off-by:
-
Steve Longerbeam authored
Parse neighbor remote devices on the video muxes input ports, add them to a subdev notifier, and register the subdev notifier for the video mux, by calling v4l2_async_register_fwnode_subdev(). Signed-off-by:
-
Steve Longerbeam authored
Adds v4l2_async_register_fwnode_subdev(), which is a convenience function for parsing a sub-device's fwnode port endpoints for connected remote sub-devices, registering a sub-device notifier, and then registering the sub-device itself. Signed-off-by:
-
Steve Longerbeam authored
The fwnode endpoint and reference parsing functions in v4l2-fwnode.c are modified to make use of v4l2_async_notifier_add_subdev(). As a result the notifier->subdevs array is no longer allocated or re-allocated, and by extension the max_subdevs value is also no longer needed. Callers of the fwnode endpoint and reference parsing functions must now first initialize the notifier with a call to v4l2_async_notifier_init(). This includes the function v4l2_async_register_subdev_sensor_common(), and the intel-ipu3, omap3isp, and rcar-vin drivers. Since the notifier->subdevs array is no longer allocated in the fwnode endpoint and reference parsing functions, the callers of those functions must never reference that array, since it is now NULL. Of the drivers that make use of the fwnode/ref parsing, only the intel-ipu3 driver references the ->subdevs[] array, (in the notifier completion callback), so that driver has been modified to iterate through the notifier->asd_list instead. Signed-off-by:
-
Steve Longerbeam authored
Add these convenience functions, which allocate an asd of match type fwnode, i2c, or device-name, of size asd_struct_size, and then adds them to the notifier asd_list. Signed-off-by:
-
Steve Longerbeam authored
v4l2_async_notifier_add_subdev() adds an asd to the notifier. It checks that no other equivalent asd's have already been added to this notifier's asd list, or to other registered notifier's waiting or done lists, and increments num_subdevs. v4l2_async_notifier_add_subdev() does not make use of the notifier subdevs array, otherwise it would have to re-allocate the array every time the function was called. In place of the subdevs array, the function adds the newly allocated asd to a new master asd_list. The function will return error with a WARN() if it is ever called with the subdevs array allocated. Drivers are now required to call a v4l2_async_notifier_init(), before the first call to v4l2_async_notifier_add_subdev(), in order to initialize the asd_list. In v4l2_async_notifier_has_async_subdev(), __v4l2_async_notifier_register(), and v4l2_async_notifier_cleanup(), maintain backward compatibility with the subdevs array, by alternatively operate on the subdevs array or a non-empty notifier->asd_list. Signed-off-by:
-
Steve Longerbeam authored
Generalize v4l2_async_notifier_fwnode_has_async_subdev() to allow searching for any type of async subdev, not just fwnodes. Rename to v4l2_async_notifier_has_async_subdev() and pass it an asd pointer. Signed-off-by:
-
Steve Longerbeam authored
Documentation/devicetree/bindings/media/video-interfaces.txt states that the 'remote-endpoint' property is optional. So v4l2_async_notifier_fwnode_parse_endpoint() should not return error if the endpoint has no remote port parent. Just ignore the endpoint, skip adding an asd to the notifier and return 0. __v4l2_async_notifier_parse_fwnode_endpoints() will then continue parsing the remaining port endpoints of the device. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Niklas Söderlund authored
Fix copy-and-paste error in comment for TXB CSI-2 transmitter power down sequence. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jacopo Mondi authored
The adv748x assumes input endpoints are always enabled, and registers a subdevice for each of them when the corresponding output subdevice is registered. Fix this by conditionally registering the input subdevice only if it is actually described in device tree. Tested-by:
-
Jacopo Mondi authored
The ADV748x has two CSI-2 output port and one TTL input/output port for digital video reception/transmission. The TTL digital pad is unconditionally enabled during the device reset even if not used. Same goes for the TXA and TXB CSI-2 outputs, which are enabled by the initial settings blob programmed into the chip. In order to improve power saving, do not enable unused output interfaces: keep TTL output disabled, as it is not used, and drop CSI-2 output enabling from the initial settings list, as they get conditionally enabled later. Tested-by:
-
Jacopo Mondi authored
As the driver is now allowed to probe with a single output endpoint, power management routines shall now take into account the case a CSI-2 TX is not enabled. Unify the adv748x_tx_power() routine to handle transparently TXA and TXB, and enable the CSI-2 outputs conditionally. Tested-by:
-
