- 22 Feb, 2018 40 commits
-
-
Dominik Brodowski authored
commit d8e92de8 upstream. Replace a couple of magically connected buffer length literal constants with a common definition that makes their relationship obvious. Also document why our sscanf() usage is safe. No intended functional changes. Suggested-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Link: http://lkml.kernel.org/r/20180211205924.GA23210@light.dominikbrodowski.netSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dominik Brodowski authored
commit 198ee8e1 upstream. The vDSO selftest tries to execute a vsyscall unconditionally, even if it is not present on the test system (e.g. if booted with vsyscall=none or with CONFIG_LEGACY_VSYSCALL_NONE=y set. Fix this by copying (and tweaking) the vsyscall check from test_vsyscall.c Signed-off-by:
-
Borislav Petkov authored
commit b498c261 upstream. That macro was touched around 2.5.8 times, judging by the full history linux repo, but it was unused even then. Get rid of it already. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux@dominikbrodowski.net Link: http://lkml.kernel.org/r/20180212201318.GD14640@pd.tnicSigned-off-by:
-
Josh Poimboeuf authored
commit b3ccefae upstream. With the following commit: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros") ... one of my suggested improvements triggered a frame pointer warning: arch/x86/entry/entry_64.o: warning: objtool: paranoid_entry()+0x11: call without frame pointer save/setup The warning is correct for the build-time code, but it's actually not relevant at runtime because of paravirt patching. The paravirt swapgs call gets replaced with either a SWAPGS instruction or NOPs at runtime. Go back to the previous behavior by removing the ELF function annotation for paranoid_entry() and adding an unwind hint, which effectively silences the warning. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kbuild-all@01.org Cc: tipbuild@zytor.com Fixes: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros") Link: http://lkml.kernel.org/r/20180212174503.5acbymg5z6p32snu@trebleSigned-off-by:
-
Dominik Brodowski authored
commit 92816f57 upstream. ... same as the other macros in arch/x86/entry/calling.h Signed-off-by:
-
Dominik Brodowski authored
commit dde3036d upstream. Previously, error_entry() and paranoid_entry() saved the GP registers onto stack space previously allocated by its callers. Combine these two steps in the callers, and use the generic PUSH_AND_CLEAR_REGS macro for that. This adds a significant amount ot text size. However, Ingo Molnar points out that: "these numbers also _very_ significantly over-represent the extra footprint. The assumptions that resulted in us compressing the IRQ entry code have changed very significantly with the new x86 IRQ allocation code we introduced in the last year: - IRQ vectors are usually populated in tightly clustered groups. With our new vector allocator code the typical per CPU allocation percentage on x86 systems is ~3 device vectors and ~10 fixed vectors out of ~220 vectors - i.e. a very low ~6% utilization (!). [...] The days where we allocated a lot of vectors on every CPU and the compression of the IRQ entry code text mattered are over. - Another issue is that only a small minority of vectors is frequent enough to actually matter to cache utilization in practice: 3-4 key IPIs and 1-2 device IRQs at most - and those vectors tend to be tightly clustered as well into about two groups, and are probably already on 2-3 cache lines in practice. For the common case of 'cache cold' IRQs it's the depth of the call chain and the fragmentation of the resulting I$ that should be the main performance limit - not the overall size of it. - The CPU side cost of IRQ delivery is still very expensive even in the best, most cached case, as in 'over a thousand cycles'. So much stuff is done that maybe contemporary x86 IRQ entry microcode already prefetches the IDT entry and its expected call target address."[*] [*] http://lkml.kernel.org/r/20180208094710.qnjixhm6hybebdv7@gmail.com The "testb $3, CS(%rsp)" instruction in the idtentry macro does not need modification. Previously, %rsp was manually decreased by 15*8; with this patch, %rsp is decreased by 15 pushq instructions. [jpoimboe@redhat.com: unwind hint improvements] Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dominik Brodowski authored
commit 30907fd1 upstream. entry_SYSCALL_64_after_hwframe() and nmi() can be converted to use PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to the interleaving, the additional XOR-based clearing of R8 and R9 in entry_SYSCALL_64_after_hwframe() should not have any noticeable negative implications. Suggested-by:
-
Dominik Brodowski authored
commit 3f01daec upstream. Those instances where ALLOC_PT_GPREGS_ON_STACK is called just before SAVE_AND_CLEAR_REGS can trivially be replaced by PUSH_AND_CLEAN_REGS. This macro uses PUSH instead of MOV and should therefore be faster, at least on newer CPUs. Suggested-by:
-
Dominik Brodowski authored
commit f7bafa2b upstream. Same as is done for syscalls, interleave XOR with PUSH instructions for exceptions/interrupts, in order to minimize the cost of the additional instructions required for register clearing. Signed-off-by:
-
Dominik Brodowski authored
commit 502af0d7 upstream. The two special, opencoded cases for POP_C_REGS can be handled by ASM macros. Signed-off-by:
-
Dominik Brodowski authored
commit 2e3f0098 upstream. All current code paths call SAVE_C_REGS and then immediately SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV sequeneces properly. While at it, remove the macros to save all except specific registers, as these macros have been unused for a long time. Suggested-by:
-
Dan Williams authored
commit 3ac6d8c7 upstream. Clear the 'extra' registers on entering the 64-bit kernel for exceptions and interrupts. The common registers are not cleared since they are likely clobbered well before they can be exploited in a speculative execution attack. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151787989146.7847.15749181712358213254.stgit@dwillia2-desk3.amr.corp.intel.com [ Made small improvements to the changelog and the code comments. ] Signed-off-by:
-
Rafael J. Wysocki authored
commit d7212cfb upstream. Commit f8594220 (x86: PM: Make APM idle driver initialize polling state) made apm_init() call cpuidle_poll_state_init(), but that only is defined for CONFIG_CPU_IDLE set, so make the empty stub of it available for CONFIG_CPU_IDLE unset too to fix the resulting build issue. Fixes: f8594220 (x86: PM: Make APM idle driver initialize polling state) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lukas Wunner authored
commit 433986c2 upstream. Commit baa8809f (PM / runtime: Optimize the use of device links) added an invocation of pm_runtime_drop_link() to __device_link_del(). However there are two variants of that function, one for CONFIG_SRCU and another for !CONFIG_SRCU, and the commit only modified the former. Fixes: baa8809f (PM / runtime: Optimize the use of device links) Cc: v4.10+ <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Ingo Molnar authored
commit 21e433bd upstream. Harmonize all the Spectre messages so that a: dmesg | grep -i spectre ... gives us most Spectre related kernel boot messages. Also fix a few other details: - clarify a comment about firmware speculation control - s/KPTI/PTI - remove various line-breaks that made the code uglier Acked-by:
David Woodhouse <dwmw@amazon.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
KarimAllah Ahmed authored
commit 3712caeb upstream. We either clear the CPU_BASED_USE_MSR_BITMAPS and end up intercepting all MSR accesses or create a valid L02 MSR bitmap and use that. This decision has to be made every time we evaluate whether we are going to generate the L02 MSR bitmap. Before commit: d28b387f ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL") ... this was probably OK since the decision was always identical. This is no longer the case now since the MSR bitmap might actually change once we decide to not intercept SPEC_CTRL and PRED_CMD. Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan.van.de.ven@intel.com Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: kvm@vger.kernel.org Cc: sironi@amazon.de Link: http://lkml.kernel.org/r/1518305967-31356-6-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
KarimAllah Ahmed authored
commit 206587a9 upstream. These two variables should check whether SPEC_CTRL and PRED_CMD are supposed to be passed through to L2 guests or not. While msr_write_intercepted_l01 would return 'true' if it is not passed through. So just invert the result of msr_write_intercepted_l01 to implement the correct semantics. Signed-off-by:
Jim Mattson <jmattson@google.com> Acked-by:
-
David Woodhouse authored
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods commit 928a4c39 upstream. With retpoline, tight loops of "call this function for every XXX" are very much pessimised by taking a prediction miss *every* time. This one is by far the biggest contributor to the guest launch time with retpoline. By marking the iterator slot_handle_…() functions always_inline, we can ensure that the indirect function call can be optimised away into a direct call and it actually generates slightly smaller code because some of the other conditionals can get optimised away too. Performance is now pretty close to what we see with nospectre_v2 on the command line. Suggested-by:
Filippo Sironi <sironi@amazon.de> Signed-off-by:
-
David Woodhouse authored
commit f208820a upstream. This reverts commit 64e16720. We cannot call C functions like that, without marking all the call-clobbered registers as, well, clobbered. We might have got away with it for now because the __ibp_barrier() function was *fairly* unlikely to actually use any other registers. But no. Just no. Signed-off-by:
-
David Woodhouse authored
commit d37fc6d3 upstream. Arjan points out that the Intel document only clears the 0xc2 microcode on *some* parts with CPUID 506E3 (INTEL_FAM6_SKYLAKE_DESKTOP stepping 3). For the Skylake H/S platform it's OK but for Skylake E3 which has the same CPUID it isn't (yet) cleared. So removing it from the blacklist was premature. Put it back for now. Also, Arjan assures me that the 0x84 microcode for Kaby Lake which was featured in one of the early revisions of the Intel document was never released to the public, and won't be until/unless it is also validated as safe. So those can change to 0x80 which is what all *other* versions of the doc have identified. Once the retrospective testing of existing public microcodes is done, we should be back into a mode where new microcodes are only released in batches and we shouldn't even need to update the blacklist for those anyway, so this tweaking of the list isn't expected to be a thing which keeps happening. Requested-by:
Arjan van de Ven <arjan.van.de.ven@intel.com> Signed-off-by:
-
David Woodhouse authored
commit 17513420 upstream. Intel have retroactively blessed the 0xc2 microcode on Skylake mobile and desktop parts, and the Gemini Lake 0x22 microcode is apparently fine too. We blacklisted the latter purely because it was present with all the other problematic ones in the 2018-01-08 release, but now it's explicitly listed as OK. We still list 0x84 for the various Kaby Lake / Coffee Lake parts, as that appeared in one version of the blacklist and then reverted to 0x80 again. We can change it if 0x84 is actually announced to be safe. Signed-off-by:
-
Nadav Amit authored
commit 14b1fcc6 upstream. The comment is confusing since the path is taken when CONFIG_PAGE_TABLE_ISOLATION=y is disabled (while the comment says it is not taken). Signed-off-by:
Nadav Amit <namit@vmware.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: nadav.amit@gmail.com Link: http://lkml.kernel.org/r/20180209170638.15161-1-namit@vmware.comSigned-off-by:
-
Balbir Singh authored
commit 4dd5f8a9 upstream. This patch splits the linear mapping if the hot-unplug range is smaller than the mapping size. The code detects if the mapping needs to be split into a smaller size and if so, uses the stop machine infrastructure to clear the existing mapping and then remap the remaining range using a smaller page size. The code will skip any region of the mapping that overlaps with kernel text and warn about it once. We don't want to remove a mapping where the kernel text and the LMB we intend to remove overlap in the same TLB mapping as it may affect the currently executing code. I've tested these changes under a kvm guest with 2 vcpus, from a split mapping point of view, some of the caveats mentioned above applied to the testing I did. Fixes: 4b5d62ca ("powerpc/mm: add radix__remove_section_mapping()") Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Tweak change log to match updated behaviour] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Artem Savkov authored
commit 2e7d1d61 upstream. Lockdep detects a possible deadlock in sun4i_ss_prng_generate() and throws an "inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage" warning. Disabling softirqs to fix this. Fixes: b8ae5c73 ("crypto: sun4i-ss - support the Security System PRNG") Signed-off-by:
Artem Savkov <artem.savkov@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Artem Savkov authored
commit dd78c832 upstream. According to crypto/rng.h generate function should return 0 on success and < 0 on error. Fixes: b8ae5c73 ("crypto: sun4i-ss - support the Security System PRNG") Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit d9afaaa4 upstream. Gcc versions before 4.4 do not recognize the __optimize__ compiler attribute: warning: ‘__optimize__’ attribute directive ignored Fixes: 7375ae3a ("compiler-gcc.h: Introduce __nostackprotector function attribute") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit df5d45aa upstream. Create a new function attribute __optimize, which allows to specify an optimization level on a per-function basis. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Dan Williams authored
commit 6b8cf5cc upstream. At entry userspace may have populated registers with values that could otherwise be useful in a speculative execution attack. Clear them to minimize the kernel's attack surface. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Dan Williams authored
commit 8e1eb3fa upstream. At entry userspace may have (maliciously) populated the extra registers outside the syscall calling convention with arbitrary values that could be useful in a speculative execution (Spectre style) attack. Clear these registers to minimize the kernel's attack surface. Note, this only clears the extra registers and not the unused registers for syscalls less than 6 arguments, since those registers are likely to be clobbered well before their values could be put to use under speculation. Note, Linus found that the XOR instructions can be executed with minimized cost if interleaved with the PUSH instructions, and Ingo's analysis found that R10 and R11 should be included in the register clearing beyond the typical 'extra' syscall calling convention registers. Suggested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit f8594220 upstream. Update the APM driver overlooked by commit 1b39e3f8 (cpuidle: Make drivers initialize polling state) to initialize the polling state like the other cpuidle drivers modified by that commit to prevent cpuidle from crashing. Fixes: 1b39e3f8 (cpuidle: Make drivers initialize polling state) Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
-
Juergen Gross authored
commit 4f277295 upstream. When running as Xen pv guest %gs is initialized some time after C code is started. Depending on stack protector usage this might be too late, resulting in page faults. So setup %gs and MSR_GS_BASE in assembly code already. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by:
Chris Patterson <cjp256@gmail.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 5bf30316 upstream. Currently kexec() will crash when switching into a 5-level paging enabled kernel. I missed that we need to change relocate_kernel() to set CR4.LA57 flag if the kernel has 5-level paging enabled. I avoided using #ifdef CONFIG_X86_5LEVEL here and inferred if we need to enable 5-level paging from previous CR4 value. This way the code is ready for boot-time switching between paging modes. With this patch applied, in addition to kexec 4-to-4 which always worked, we can kexec 4-to-5 and 5-to-5 - while 5-to-4 will need more work. Reported-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by:
-
Lucas De Marchi authored
commit 33aa69ed upstream. CFL was missing from intel_early_ids[]. The PCI ID needs to be there to allow the memory region to be stolen, otherwise we could have RAM being arbitrarily overwritten if for example we keep using the UEFI framebuffer, depending on how BIOS has set up the e820 map. Fixes: b056f8f3 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Cc: <stable@vger.kernel.org> # v4.13+ 0890540e drm/i915: add GT number to intel_device_info Cc: <stable@vger.kernel.org> # v4.13+ 41693fd5 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5 Cc: <stable@vger.kernel.org> # v4.13+ Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Anuj Phogat authored
commit 41693fd5 upstream. See Mesa commit 9c588ff Cc: Matt Turner <mattst88@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anuj Phogat <anuj.phogat@gmail.com> Reviewed-by:
-
Lionel Landwerlin authored
commit 0890540e upstream. Up to Coffeelake we could deduce this GT number from the device ID. This doesn't seem to be the case anymore. This change reorders pciids per GT and adds a gt field to intel_device_info. We set this field on the following platforms : - SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL Before & After : $ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l 209 v2: Add SNB & IVB (Chris) v3: Fix compilation error in early-quirks (Lionel) v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville) Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-2-lionel.g.landwerlin@intel.comSigned-off-by:
-
Viresh Kumar authored
commit f8975cb1 upstream. This fixes the following warning by also sending the flags argument for gpio controllers: Property 'cs-gpios', cell 6 is not a phandle reference in /ahb/apb/spi@e0100000 Fixes: 8113ba91 ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Viresh Kumar authored
commit cdd10409 upstream. The "dmas" cells for the designware DMA controller need to have only 3 properties apart from the phandle: request line, src master and destination master. But the commit 6e8887f6 updated it incorrectly while moving from platform code to DT. Fix it. Cc: stable@vger.kernel.org # v3.10+ Fixes: 6e8887f6 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT") Reported-by:
-
Viresh Kumar authored
commit 6ffb5b4f upstream. The interrupt-parent of rtc was missing, add it. Fixes: 8113ba91 ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by:
-
Sean Wang authored
commit b96a696f upstream. Fix that bananapi-r2 booting from SD-card would fail since incorrect polarity is applied to the previous setup with GPIO_ACTIVE_HIGH. Cc: stable@vger.kernel.org Fixes: 0eed8d09 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2") Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Tested-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit e8bfa042 upstream. The clcd device is lacking an interrupt-parent property, which makes the interrupt unusable and shows up as a warning with the latest dtc version: arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000 arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000 I looked up the old board files and found that this interrupt has the same irqchip as all the other on-chip device, it just needs one extra line. Fixes: 17470b7d ("ARM: dts: add the CLCD LCD display to the NHK15") Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
-
