- 10 May, 2012 18 commits
-
-
Alexander Duyck authored
The drop enable bit can be used to improve the performance of the adapter in the case of multiple queues being present. This performance gain is due to the fact that some slower CPUs can cause the FIFO to backfill preventing faster CPUs from receiving additional work. By setting the drop enable bit we prevent this and instead just drop the packets that would have been bound for the slower CPU. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change cleans up the logic in the priority based flow control configuration routines. Both the 82599 and 82598 based routines perform similar functions however they are both arranged completely differently. This patch goes over both of them to clean up the code. In addition I am dropping the ixgbe_fc_pfc flow control mode and instead just replacing it with checks for if priority flow control is enabled. This allows us to maintain some of the link flow control information which allows for an easier transition between link and priority flow control. Signed-off-by:
-
Alexander Duyck authored
Previously we would get a mailbox error and still process the message. Instead we should exit on error. In addition we should also be flushing the ACK of the message so that we can guarantee that the other end is aware we have received the message while we are processing it. Signed-off-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Koki Sanagi authored
Current igb outputs registers related to TX/RX queues(ex. RDT, RDH, TDT, TDH). But it thinks the number of RX/TX queues is 4. But 82576 has 16 RX/TX queues. This patch modifies igb to output the rest of the registers if the device is 82576. Signed-off-by:
Koki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Joe Perches authored
Add a boolean function to check if 2 ethernet addresses are the same. This is to avoid any confusion about compare_ether_addr returning an unsigned, and not being able to use the compare_ether_addr function for sorting ala memcmp. Signed-off-by:
-
- 09 May, 2012 8 commits
-
-
-
Jeff Kirsher authored
During merge of net to net-next the changes in patch: e1000e: Fix default interrupt throttle rate not set in NIC HW got munged in param.c of the e1000e driver. This rectifies the merge issues. Signed-off-by:
-
Florian Westphal authored
can be used e.g. for ingress traffic policing or to detect when a host/port consumes more bandwidth than expected. This is done by optionally making cost to mean "cost per 16-byte-chunk-of-data" instead of "cost per packet". Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
followup patch would bloat main match function too much. Signed-off-by:
-
Florian Westphal authored
credit_cap can be set to credit, which avoids inlining user2credits twice. Also, remove inline keyword and let compiler decide. old: 684 192 0 876 36c net/netfilter/xt_limit.o 4927 344 32 5303 14b7 net/netfilter/xt_hashlimit.o now: 668 192 0 860 35c net/netfilter/xt_limit.o 4793 344 32 5169 1431 net/netfilter/xt_hashlimit.o Signed-off-by: -
Hans Schillstrom authored
The target allows you to create rules in the "raw" and "mangle" tables which set the skbuff mark by means of hash calculation within a given range. The nfmark can influence the routing method (see "Use netfilter MARK value as routing key") and can also be used by other subsystems to change their behaviour. [ Part of this patch has been refactorized and modified by Pablo Neira Ayuso ] Signed-off-by:
Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by:
-
Hans Schillstrom authored
This patch adds the flags parameter to ipv6_find_hdr. This flags allows us to: * know if this is a fragment. * stop at the AH header, so the information contained in that header can be used for some specific packet handling. This patch also adds the offset parameter for inspection of one inner IPv6 header that is contained in error messages. Signed-off-by:
-
Jeff Kirsher authored
During merge of net to net-next the changes in patch: e1000e: Fix default interrupt throttle rate not set in NIC HW got munged in param.c of the e1000e driver. This rectifies the merge issues. Signed-off-by:
-
- 08 May, 2012 14 commits
-
-
-
Pablo Neira Ayuso authored
This patch removes ip_queue support which was marked as obsolete years ago. The nfnetlink_queue modules provides more advanced user-space packet queueing mechanism. This patch also removes capability code included in SELinux that refers to ip_queue. Otherwise, we break compilation. Several warning has been sent regarding this to the mailing list in the past month without anyone rising the hand to stop this with some strong argument. Signed-off-by: -
Pablo Neira Ayuso authored
Explicit helper attachment via the CT target is broken with NAT if non-standard ports are used. This problem was hidden behind the automatic helper assignment routine. Thus, it becomes more noticeable now that we can disable the automatic helper assignment with Eric Leblond's: 9e8ac5a netfilter: nf_ct_helper: allow to disable automatic helper assignment Basically, nf_conntrack_alter_reply asks for looking up the helper up if NAT is enabled. Unfortunately, we don't have the conntrack template at that point anymore. Since we don't want to rely on the automatic helper assignment, we can skip the second look-up and stick to the helper that was attached by iptables. With the CT target, the user is in full control of helper attachment, thus, the policy is to trust what the user explicitly configures via iptables (no automatic magic anymore). Interestingly, this bug was hidden by the automatic helper look-up code. But it can be easily trigger if you attach the helper in a non-standard port, eg. iptables -I PREROUTING -t raw -p tcp --dport 8888 \ -j CT --helper ftp And you disabled the automatic helper assignment. I added the IPS_HELPER_BIT that allows us to differenciate between a helper that has been explicitly attached and those that have been automatically assigned. I didn't come up with a better solution (having backward compatibility in mind). Signed-off-by: -
Kelvie Wong authored
This refreshes the "timeout" attribute in existing expectations if one is given. The use case for this would be for userspace helpers to extend the lifetime of the expectation when requested, as this is not possible right now without deleting/recreating the expectation. I use this specifically for forwarding DCERPC traffic through: DCERPC has a port mapper daemon that chooses a (seemingly) random port for future traffic to go to. We expect this traffic (with a reasonable timeout), but sometimes the port mapper will tell the client to continue using the same port. This allows us to extend the expectation accordingly. Signed-off-by:
Kelvie Wong <kelvie@ieee.org> Signed-off-by:
-
Hans Schillstrom authored
To build ip_vs as a module sysctl_rmem_max and sysctl_wmem_max needs to be exported. The dependency was added by "ipvs: wakeup master thread" patch. Signed-off-by:
Simon Horman <horms@verge.net.au> Acked-by:
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent it from being exposed globally. This quiets the sparse warnings: warning: symbol '__ipvs_proto_data_get' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent it from being exposed globally. This quiets the sparse warnings: warning: symbol 'ip_vs_ftp_init' was not declared. Should it be static? Signed-off-by:
-
Pablo Neira Ayuso authored
cp->flags is marked volatile but ip_vs_bind_dest can safely modify the flags, so save some CPU cycles by using temp variable. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Pablo Neira Ayuso authored
Allow master and backup servers to use many threads for sync traffic. Add sysctl var "sync_ports" to define the number of threads. Every thread will use single UDP port, thread 0 will use the default port 8848 while last thread will use port 8848+sync_ports-1. The sync traffic for connections is scheduled to many master threads based on the cp address but one connection is always assigned to same thread to avoid reordering of the sync messages. Remove ip_vs_sync_switch_mode because this check for sync mode change is still risky. Instead, check for mode change under sync_buff_lock. Make sure the backup socks do not block on reading. Special thanks to Aleksey Chudov for helping in all tests. Signed-off-by:
Aleksey Chudov <aleksey.chudov@gmail.com> Signed-off-by:
-
Julian Anastasov authored
Add two new sysctl vars to control the sync rate with the main idea to reduce the rate for connection templates because currently it depends on the packet rate for controlled connections. This mechanism should be useful also for normal connections with high traffic. sync_refresh_period: in seconds, difference in reported connection timer that triggers new sync message. It can be used to avoid sync messages for the specified period (or half of the connection timeout if it is lower) if connection state is not changed from last sync. sync_retries: integer, 0..3, defines sync retries with period of sync_refresh_period/8. Useful to protect against loss of sync messages. Allow sysctl_sync_threshold to be used with sysctl_sync_period=0, so that only single sync message is sent if sync_refresh_period is also 0. Add new field "sync_endtime" in connection structure to hold the reported time when connection expires. The 2 lowest bits will represent the retry count. As the sysctl_sync_period now can be 0 use ACCESS_ONCE to avoid division by zero. Special thanks to Aleksey Chudov for being patient with me, for his extensive reports and helping in all tests. Signed-off-by:
-
Pablo Neira Ayuso authored
High rate of sync messages in master can lead to overflowing the socket buffer and dropping the messages. Fixed sleep of 1 second without wakeup events is not suitable for loaded masters, Use delayed_work to schedule sending for queued messages and limit the delay to IPVS_SYNC_SEND_DELAY (20ms). This will reduce the rate of wakeups but to avoid sending long bursts we wakeup the master thread after IPVS_SYNC_WAKEUP_RATE (8) messages. Add hard limit for the queued messages before sending by using "sync_qlen_max" sysctl var. It defaults to 1/32 of the memory pages but actually represents number of messages. It will protect us from allocating large parts of memory when the sending rate is lower than the queuing rate. As suggested by Pablo, add new sysctl var "sync_sock_size" to configure the SNDBUF (master) or RCVBUF (slave) socket limit. Default value is 0 (preserve system defaults). Change the master thread to detect and block on SNDBUF overflow, so that we do not drop messages when the socket limit is low but the sync_qlen_max limit is not reached. On ENOBUFS or other errors just drop the messages. Change master thread to enter TASK_INTERRUPTIBLE state early, so that we do not miss wakeups due to messages or kthread_should_stop event. Thanks to Pablo Neira Ayuso for his valuable feedback! Signed-off-by:
-
Julian Anastasov authored
As the goal is to mirror the inactconns/activeconns counters in the backup server, make sure the cp->flags are updated even if cp is still not bound to dest. If cp->flags are not updated ip_vs_bind_dest will rely only on the initial flags when updating the counters. To avoid mistakes and complicated checks for protocol state rely only on the IP_VS_CONN_F_INACTIVE bit when updating the counters. Signed-off-by:
-
Julian Anastasov authored
Initially, when the synced connection is created we use the forwarding method provided by master but once we bind to destination it can be changed. As result, we must update the application and the transmitter. As ip_vs_try_bind_dest is called always for connections that require dest binding, there is no need to validate the cp and dest pointers. Signed-off-by:
-
Julian Anastasov authored
As the IP_VS_CONN_F_INACTIVE bit is properly set in cp->flags for all kind of connections we do not need to add special checks for synced connections when updating the activeconns/inactconns counters for first time. Now logic will look just like in ip_vs_unbind_dest. Signed-off-by:
-
