Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 01ef7dbf ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

This commit implements message parser for Fireface 400 to pass data of
knob control to user space. The parser has FIFO which can store maximum
32 events without no overrun detection since it doesn't matter to lose
the event.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-7-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

This commit adds local framework to message parser. This is preparation
for future work to pass event of knob control for Fireface 400 to user
space.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-6-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

This commit adds a new event of knob control specific to RME Fireface 400.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-5-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

This is minor code refactoring to add helper function to parse MIDI message
bytes in quadlet message.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-4-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The time stamp of isochronous cycle at which asynchronous transaction is
sent is perhaps useful somehow. A commit b2405aa9 ("firewire: add
kernel API to access packet structure in request structure for AR context")
adds kernel API to retrieve the time stamp in inner structure of request
subaction.

This commit changes local framework to handle message delivered by the
asynchronous transaction so that time stamp is picked up by the kernel API.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-3-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

It's cleared that Fireface 400 transmits quadlet message for two purposes
at least; received MIDI messages and notification of knob control
operation. Nevertheless current implementation uses callback function name
just for MIDI messages.

This commit renames the callback functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-2-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

All drivers in ALSA firewire stack have never reported extra delay for
the runtime of PCM substream. There is some reason, but the main reason
is that the meaning of extra delay differs depending on driver design,
especially for the packet-oriented driver.

Here I define the extra delay for the case of IEC 61883-1/6. It is the
number of PCM frames transferred or should be transferred between the
current isochronous cycle and the isochronous cycle to which the latest
isochronous packet arrived (in IR context) or is scheduled (in IT context).

A commit baa914cd ("firewire: add kernel API to access CYCLE_TIME
register") allow unit drivers to read CYCLE_TIME of 1394 OHCI controller.
It allows the drivers to compute the current isochronous cycle.

Additionally, a commit f0117128 ("ALSA: firewire-lib: keep history to
process isochronous packet") enables to save the history processing
packets. It allows the driver to estimate the total number of data blocks
in packets arriving shortly, or calculate the total number of data blocks
in scheduled packets.

Now it is ready. This commit implements the computation of the extra delay.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230110134933.322794-4-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

This commit obsoletes return value from the context payload processing layer
since the multiplier between the data block count and PCM frame count was
moved to the packet streaming processing layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230110134933.322794-3-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The current implementation delegates the task to calculate the number of
processed PCM frames into the context payload processing layer. It looks
good as long as frame calculation is done for a single purpose.
Nevertheless, another purpose, the computation of extra delay for the
runtime of PCM substream, requires frame calculation, too.

This commit refactors the current implementation so that the packet stream
processing layer is responsible for the calculation of PCM frame, too. The
member is moved to stream structure for multiplier between data block
count and PCM frame count.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230110134933.322794-2-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

A commit baa914cd ("firewire: add kernel API to access CYCLE_TIME
register") allow unit drivers to read CYCLE_TIME of 1394 OHCI controller.
The value expresses monotonic time with 42.195 Mhz resolution and wrapping
around every 128 seconds. The controller uses the time to govern
isochronous cycle.

This commit extends tracepoints event including the value so that event
parser can compute gap between current isochronous cycle and the latest
isochronous cycle in which packet is processed (in IR context) or scheduled
(in IT context). It loses backward compatibility to former format of the
tracepoints event.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230109213231.138223-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The history to process isochronous packets is useful when computing gap
between current isochronous cycle and the latest isochronous cycle in
which packet is processed (in IR context) and scheduled (in IT context).

This commit stores the most recent packet descriptors to keep the history.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230109021738.75543-4-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The list of packet descriptor is passed to context payload processing
layer so that each driver can copy PCM frames, MIDI messages, and device
specific data between packet payload buffer and intermediate buffer for
user space application.

The list of packet descriptor was replaced by circular linked list in a
previous commit. This commit uses circular linked in context payload
processing layer as well.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230109021738.75543-3-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

Current implementation uses list of packet descriptor as template to
schedule isochronous packet. The packet descriptors are operated by
position and size, while circular linked list is convenient to enumerate
the packet descriptors.

This commit utilizes circular linked list for the purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230109021738.75543-2-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

When sequence replay is enabled for media clock recovery, current
implementation refers to cache of sequence descriptors in tx packets, then
fulfil sequence descriptors for rx packets. The initialization for rx
packets is done before starting packet streaming, while it can be postponed
till the cache has enough entries for the replay.

This commit refactors for the purpose as well as minor code change for
renaming of structure member.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-5-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

When sequence replay is enabled for media clock recovery, current
implementation caches sequence descriptors from packet descriptors in tx
packets. Helper function for the purpose do not necessarily have good
readability.

This commit refactors relevant functions by renaming structure members,
function name, and function local variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-4-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

When scheduling transmission of rx packets, current implementation
fulfils packet descriptors after pooling sequence descriptors. It is for
packet queueing. Besides the implementations do not necessarily have
good readability.

This commit refactors them by adding function local variables and
function arguments.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-3-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

When scheduling transmission of rx packets, current implementation pools
sequence descriptors at first for media clock. Two methods are used for
the purpose depending on four cases, while the implementations do not
necessarily have good readability.

This commit refactors them by adding function pointers and functions
arguments.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-2-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add more coverage to our standard test cases:

 - 8kHz mono and stereo to verify that the most common mono format is
   clocked correctly.
 - 44.1kHz stereo to verify that this different clock base is generated
   accurately.
 - 48kHz 6 channel to verify that 6 channel is clocked correctly.
 - 96kHz stereo since that is a common audiophile rate.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-7-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Help people understand what the standard tests are trying to cover by
providing descriptions which both serve as comments in the file and log
messages in the program's output.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-6-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

In order to help with the comprehensibility of tests it is useful for us to
document what the test is attempting to cover. We could just do this through
comments in the configuration files but in order to aid people looking at
the output of the program in logs let's provide support for an optional
'description' directive which we log prior to running each of the tests.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-5-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since we don't know what the capabilities of an unknown card is any of our
standard tests may fail due to not being supported by the system. Set a
flag once we've configured the stream, just before we start data, to say
that the system accepted our stream configuration.

Since there shouldn't be a use case for tests that are specified for the
individual system failing for those tests we also add a new test which
fails if we are unable to configure the settings specified in the system
specific configuration file.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-4-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Rather than allowing the system specific tests to replace the default set
of tests instead run them in addition to the standard set of tests. In
order to avoid name collisions in the reported tests we add an additional
test class element to the reported tests. Doing this means we always get a
consistent baseline of coverage no matter what card we run on but retain
the ability to specify specific coverage for a given system.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-3-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Obtain all test parameters from the configuration files. The defaults
are defined in the pcm-test.conf file. The test count and parameters
may be variable per specific hardware.

Also, handle alt_formats field now (with the fixes in the format loop).
It replaces the original "automatic" logic which is not so universal.

The code may be further extended to skip various tests based
on the configuration hints, if the exact PCM hardware parameters
are not available for the given hardware.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-2-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

In preparation to adopting a better, more comprehensive approach to
adding the coverage that was just added using some changes from Jaroslav
which were sent at the same time the recently added improvements were
being applied drop what was applied.  This reverts:

  7d721bae "kselftest/alsa: Add more coverage of sample rates and channel counts"
  ee12040d "kselftest/alsa: Provide more meaningful names for tests"
  ae95efd9 "kselftest/alsa: Don't any configuration in the sample config"
  8370d9b0 Revert "kselftest/alsa: Report failures to set the requested channels as skips"
  f944f8b5 "kselftest/alsa: Report failures to set the requested sample rate as skips"
  22eeb8f5 "kselftest/alsa: Refactor pcm-test to list the tests to run in a struct"
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-1-5a152e65b1e1@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull perf fixes from Borislav Petkov:

 - Pass only an initialized perf event attribute to the LSM hook

 - Fix a use-after-free on the perf syscall's error path

 - A potential integer overflow fix in amd_core_pmu_init()

 - Fix the cgroup events tracking after the context handling rewrite

 - Return the proper value from the inherit_event() function on error

* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Call LSM hook after copying perf_event_attr
  perf: Fix use-after-free in error path
  perf/x86/amd: fix potential integer overflow on shift of a int
  perf/core: Fix cgroup events tracking
  perf core: Return error pointer if inherit_event() fails to find pmu_ctx

Pull x86 fixes from Borislav Petkov:

 - Two fixes to correct how kprobes handles INT3 now that they're added
   by other functionality like the rethunks and not only kgdb

 - Remove __init section markings of two functions which are referenced
   by a function in the .text section

* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
  x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
  x86/calldepth: Fix incorrect init section references

Pull locking fixes from Borislav Petkov:

 - Prevent the leaking of a debug timer in futex_waitv()

 - A preempt-RT mutex locking fix, adding the proper acquire semantics

* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
  rtmutex: Add acquire semantics for rtmutex lock acquisition slow path

Pull drm fixes from Daniel Vetter:
 "I'm just back from the mountains, and Dave is out at the beach and
  should be back in a week again. Just i915 fixes and since Rodrigo
  bothered to make the pull last week I figured I should warm up gpg and
  forward this in a nice signed tag as a new years present!

   - i915 fixes for newer platforms

   - i915 locking rework to not give up in vm eviction fallback path too
     early"

* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
  drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
  drm/i915/uc: Fix two issues with over-size firmware files
  drm/i915: improve the catch-all evict to handle lock contention
  drm/i915: Remove __maybe_unused from mtl_info
  drm/i915: fix TLB invalidation for Gen12.50 video and compute engines

Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com

Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix broken BuildID

 - Add srcrpm-pkg to the help message

 - Fix the option order for modpost built with musl libc

 - Fix the build dependency of rpm-pkg for openSUSE

* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  fixdep: remove unneeded <stdarg.h> inclusion
  kbuild: sort single-targets alphabetically again
  kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
  kbuild: Fix running modpost with musl libc
  kbuild: add a missing line for help message
  .gitignore: ignore *.rpm
  arch: fix broken BuildID for arm64 and riscv
  kconfig: Add static text for search information in help menu

Pull ata fix from Damien Le Moal:
 "A single fix to address an issue with wake from suspend with PCS
  adapters, from Adam"

* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Fix PCS quirk application for suspend

Pull ACPI fixes from Rafael Wysocki:
 "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
  support adjustments and ACPI backlight handling fixes, mostly for
  platforms using AMD chips.

  Specifics:

   - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
     14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
     Schumacher).

   - Adjust ACPI video detection fallback path to prevent
     non-operational ACPI backlight devices from being created on
     systems where the native driver does not detect a suitable panel
     (Mario Limonciello).

   - Fix Apple GMUX backlight detection (Hans de Goede).

   - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
     and stop using AMD-specific low-power S0 idle code path for systems
     with Rembrandt chips and newer (Mario Limonciello)"

* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
  ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
  ACPI: video: Fix Apple GMUX backlight detection
  ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
  ACPI: resource: do IRQ override on Lenovo 14ALC7
  ACPI: resource: do IRQ override on XMG Core 15
  ACPI: video: Don't enable fallback path for creating ACPI backlight by default
  drm/amd/display: Report to ACPI video if no panels were found
  ACPI: video: Allow GPU drivers to report no panels

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes:

   - A regression fix for HDMI audio on HD-audio AMD codecs

   - Fixes for LINE6 MIDI handling

   - HD-audio quirk for Dell laptops"

* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
  ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
  ALSA: line6: fix stack overflow in line6_midi_transmit
  ALSA: line6: correct midi status byte when receiving data from podxt

Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:

 - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
   14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund,  Erik
   Schumacher).

 - Adjust ACPI video detection fallback path to prevent non-operational
   ACPI backlight devices from being created on systems where the native
   driver does not detect a suitable panel (Mario Limonciello).

 - Fix Apple GMUX backlight detection (Hans de Goede).

* acpi-resource:
  ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
  ACPI: resource: do IRQ override on Lenovo 14ALC7
  ACPI: resource: do IRQ override on XMG Core 15

* acpi-video:
  ACPI: video: Fix Apple GMUX backlight detection
  ACPI: video: Don't enable fallback path for creating ACPI backlight by default
  drm/amd/display: Report to ACPI video if no panels were found
  ACPI: video: Allow GPU drivers to report no panels

Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.

Fixes: 963bbdb3 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.

MIPI sequence v4 also adds a flag to fall back to non-native sequences.

v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
  too (Ville)
- References instead of Closes issue 6131 because this does not fix everything

v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)

v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)

v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This is unneeded since commit 69304379 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>