- 30 Sep, 2016 40 commits
-
-
Arvind Yadav authored
commit bae170ef upstream. Free memory mapping, if probe is not successful. Fixes: 4a9b3737 ("power: reset: move hisilicon reboot code") Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 79ad07d4 upstream. There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa8 ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit dc01a28d upstream. We check for NULL but then dereference "info->mtd" on the next line. Fixes: 72169755 ('mtd: maps: sa1100-flash: show parent device in sysfs') Signed-off-by:
-
Al Viro authored
commit e23d4159 upstream. Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit 96d41019 upstream. fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit 12703dbf upstream. Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.czSigned-off-by:
-
Brian Foster authored
commit 800b2694 upstream. xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Ian Kent authored
commit 7cbdb4a2 upstream. Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
Al Viro authored
commit ea01a184 upstream. * make autofs4_expire_indirect() skip the dentries being in process of expiry * do *not* mess with list_move(); making sure that dentry with AUTOFS_INF_EXPIRING are not picked for expiry is enough. * do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb() there. Clear it at the same time we clear EXPIRING. Makes a bunch of tests simpler. * rename NO_RCU to WANT_EXPIRE, which is what it really is. Signed-off-by:
-
Thierry Reding authored
commit ff01c944 upstream. Commit d1cd2142 ("pwm: Set enable state properly on failed call to enable") introduced a mutex that is needed to protect internal state of PWM devices. Since that mutex is acquired in pwm_set_polarity() and in pwm_enable() and might potentially block, all PWM devices effectively become "might sleep". It's rather pointless to keep the .can_sleep field around, but given that there are external users let's postpone the removal for the next release cycle. Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Davide Caratti authored
[ Upstream commit 9264251e ] commit bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") seems to have accidentally reverted commit 47cc84ce ("bridge: fix parsing of MLDv2 reports"). This commit brings back a change to br_ip6_multicast_mld2_report() where parsing of MLDv2 reports stops when the first group is successfully added to the MDB cache. Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Russell King authored
[ Upstream commit 2fb04fdf ] Commit b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Xander Huff authored
[ Upstream commit c3e70edd ] This reverts: commit 33c133cc ("phy: IRQ cannot be shared") On hardware with multiple PHY devices hooked up to the same IRQ line, allow them to share it. Sergei Shtylyov says: "I'm not sure now what was the reason I concluded that the IRQ sharing was impossible... most probably I thought that the kernel IRQ handling code exited the loop over the IRQ actions once IRQ_HANDLED was returned -- which is obviously not so in reality..." Signed-off-by:
Xander Huff <xander.huff@ni.com> Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 4f101c47 ] We kept shadow copies of which interrupt sources we have enabled and disabled, but due to an order bug in how intrl2_mask_clear was defined, we could run into the following scenario: CPU0 CPU1 intrl2_1_mask_clear(..) sets INTRL2_CPU_MASK_CLEAR bcm_sf2_switch_1_isr read INTRL2_CPU_STATUS and masks with stale irq1_mask value updates irq1_mask value Which would make us loop again and again trying to process and interrupt we are not clearing since our copy of whether it was enabled before still indicates it was not. Fix this by updating the shadow copy first, and then unasking at the HW level. Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Paul Blakey authored
[ Upstream commit 2c0f8ce1 ] Set and verify signature calculates the signature for each of the mailbox nodes, even for those that are unused (from cache). Added a missing length check to set and verify only those which are used. While here, also moved the setting of msg's nodes token to where we already go over them. This saves a pass because checksum is disabled, and the only useful thing remaining that set signature does is setting the token. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit d2fbdf76 ] tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit 5ba092ef ] If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [<ffffffff82344f40>] dump_stack+0xac/0xfc [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411 [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970 [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160 [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0 [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120 [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0 [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630 [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0 [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340 [<ffffffff833c7e09>] SyS_connect+0x9/0x10 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by:
-
Lance Richardson authored
[ Upstream commit a5d0dc81 ] When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by:
Hangbin Liu <haliu@redhat.com> Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit 6e1ce3c3 upstream. Right now we use the 'readlock' both for protecting some of the af_unix IO path and for making the bind be single-threaded. The two are independent, but using the same lock makes for a nasty deadlock due to ordering with regards to filesystem locking. The bind locking would want to nest outside the VSF pathname locking, but the IO locking wants to nest inside some of those same locks. We tried to fix this earlier with commit c845acb3 ("af_unix: Fix splice-bind deadlock") which moved the readlock inside the vfs locks, but that caused problems with overlayfs that will then call back into filesystem routines that take the lock in the wrong order anyway. Splitting the locks means that we can go back to having the bind lock be the outermost lock, and we don't have any deadlocks with lock ordering. Acked-by:
Rainer Weikusat <rweikusat@cyberadapt.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Linus Torvalds authored
commit 38f7bd94 upstream. This reverts commit c845acb3. It turns out that it just replaces one deadlock with another one: we can still get the wrong lock ordering with the readlock due to overlayfs calling back into the filesystem layer and still taking the vfs locks after the readlock. The proper solution ends up being to just split the readlock into two pieces: the bind lock (taken *outside* the vfs locks) and the IO lock (taken *inside* the filesystem locks). The two locks are independent anyway. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 24b27fc4 ] Following few steps will crash kernel - (a) Create bonding master > modprobe bonding miimon=50 (b) Create macvlan bridge on eth2 > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \ type macvlan (c) Now try adding eth2 into the bond > echo +eth2 > /sys/class/net/bond0/bonding/slaves <crash> Bonding does lots of things before checking if the device enslaved is busy or not. In this case when the notifier call-chain sends notifications, the bond_netdev_event() assumes that the rx_handler /rx_handler_data is registered while the bond_enslave() hasn't progressed far enough to register rx_handler for the new slave. This patch adds a rx_handler check that can be performed right at the beginning of the enslave code to avoid getting into this situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 546e559c upstream. The pd_seq_sync pointer can't be NULL, we have to check its entries instead. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
commit 86d65b7e upstream. gcc-6 warns about code in the nouveau driver that is obviously silly: drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next': drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare] if (pm->sequence != pm->sequence) { The behavior was accidentally introduced in a patch described as "This is purely preparation for upcoming commits, there should be no code changes here.". As far as I can tell, that was true for the rest of that patch except for this one function, which has been changed to a NOP. This patch restores the original behavior. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 8c1aeaa1 ("drm/nouveau/pm: cosmetic changes") Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Colin Ian King authored
commit b6acb0cf upstream. Fix indent warning when building with gcc 6: drivers/staging/iio/adc/ad7192.c:239:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 2cce76c3 upstream. gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 362210e0 upstream. A cleanup patch in linux-3.18 moved around some code in the ath9k driver and left some code to be indented in a misleading way, made worse by the addition of some new code for p2p mode, as discovered by a new gcc-6 warning: drivers/net/wireless/ath/ath9k/init.c: In function 'ath9k_set_hw_capab': drivers/net/wireless/ath/ath9k/init.c:851:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] hw->wiphy->iface_combinations = if_comb; ^~ drivers/net/wireless/ath/ath9k/init.c:847:3: note: ...this 'if' clause, but it is not if (ath9k_is_chanctx_enabled()) ^~ The code is in fact correct, but the indentation is not, so I'm reformatting it as it should have been after the original cleanup. Signed-off-by:
-
Arnd Bergmann authored
commit 0fb50400 upstream. gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index(): drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index': drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare] client->adapter->nr == client->adapter->nr) { ^~ This was introduced in a slighly incorrect conversion, and it's clear that the comparison was meant to compare the iterator to the current subdev instead, as we do in the line above. Fixes: d3723239 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name") Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Linus Torvalds authored
commit 194dc870 upstream. Some of our "for_each_xyz()" macro constructs make gcc unhappy about lack of braces around if-statements inside or outside the loop, because the loop construct itself has a "if-then-else" statement inside of it. The resulting warnings look something like this: drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’: drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (ctx != dev_priv->kernel_context) ^ even if the code itself is fine. Since the warning is fairly easy to avoid by adding a braces around the if-statement near the for_each_xyz() construct, do so, rather than disabling the otherwise potentially useful warning. (The if-then-else statements used in the "for_each_xyz()" constructs are designed to be inherently safe even with no braces, but in this case it's quite understandable that gcc isn't really able to tell that). This finally leaves the standard "allmodconfig" build with just a handful of remaining warnings, so new and valid warnings hopefully will stand out. Signed-off-by:
-
Arnd Bergmann authored
commit 8e0cc8c3 upstream. gcc points out code that is not indented the way it is interpreted: net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen': net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] return cfpkt_getlen(pkt); ^~~~~~ net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not else ^~~~ It is clear from the context that not returning here would be a bug, as we'd end up passing a negative length into a function that takes a u16 length, so it is not missing curly braces here, and I'm assuming that the indentation is the only part that's wrong about it. Signed-off-by:
-
Steven Rostedt authored
commit 377ccbb4 upstream. With the latest gcc compilers, they give a warning if __builtin_return_address() parameter is greater than 0. That is because if it is used by a function called by a top level function (or in the case of the kernel, by assembly), it can try to access stack frames outside the stack and crash the system. The tracing system uses __builtin_return_address() of up to 2! But it is well aware of the dangers that it may have, and has even added precautions to protect against it (see the thunk code in arch/x86/entry/thunk*.S) Linus originally added KBUILD_CFLAGS that would suppress the warning for the entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory wouldn't work. The tracing directory plays a bit with the CFLAGS and requires a little more logic. This adds that special logic to only suppress the warning for the tracing directory. If it is used anywhere else outside of tracing, the warning will still be triggered. Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.homeTested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Linus Torvalds authored
commit 124a3d88 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:
-
Linus Torvalds authored
commit 6e8d666e upstream. Several build configurations had already disabled this warning because it generates a lot of false positives. But some had not, and it was still enabled for "allmodconfig" builds, for example. Looking at the warnings produced, every single one I looked at was a false positive, and the warnings are frequent enough (and big enough) that they can easily hide real problems that you don't notice in the noise generated by -Wmaybe-uninitialized. The warning is good in theory, but this is a classic case of a warning that causes more problems than the warning can solve. If gcc gets better at avoiding false positives, we may be able to re-enable this warning. But as is, we're better off without it, and I want to be able to see the *real* warnings. Signed-off-by:
-
Arnd Bergmann authored
commit e72e2dfe upstream. When gcov profiling is enabled, we see a lot of spurious warnings about possibly uninitialized variables being used: arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page': arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup': drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized] kernel/cgroup.c: In function 'cgroup_mount': kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized] All of these are false positives, so it seems better to just disable the warnings whenever GCOV is enabled. Most users don't enable GCOV, and based on a prior patch, it is now also disabled for 'allmodconfig' builds, so there should be no downsides of doing this. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Arnd Bergmann authored
commit 815eb71e upstream. CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints incorrect warnings about a lot of variables that it thinks can be used uninitialized, e.g.: i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer': i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function iio/gyro/itg3200_core.c: In function 'itg3200_probe': iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits': leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function misc/bmp085.c: In function 'show_pressure': misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function power/ds2782_battery.c: In function 'ds2786_get_capacity': power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function These are all false positives that either rob someone's time when trying to figure out whether they are real, or they get people to send wrong patches to shut up the warnings. Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in production, so disabling the whole class of warnings for this configuration has no serious downsides either. Signed-off-by:
-
Robert Jarzmik authored
commit 51193b76 upstream. When the kernel path contains a space or a colon somewhere in the path name, the modules_install target doesn't work anymore, as the path names are not enclosed in double quotes. It is also supposed that and O= build will suffer from the same weakness as modules_install. Instead of checking and improving kbuild to resist to directories including these characters, error out early to prevent any build if the kernel's main directory contains a space. Signed-off-by:
-
Josh Poimboeuf authored
commit e17cf3a8 upstream. Running "make O=foo" (with a relative directory path) fails with: scripts/Makefile.include:3: *** O=foo does not exist. Stop. /home/jpoimboe/git/linux/Makefile:1547: recipe for target 'tools/objtool' failed The tools Makefile gets confused by the relative path and tries to build objtool in tools/foo. Convert the output directory to an absolute path before passing it to the tools Makefile. Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-next@vger.kernel.org Cc: linux@roeck-us.net Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/94a078c6c998fac9f01a14f574008bf7dff40191.1457016803.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wang YanQing authored
commit 40ab87a4 upstream. Commit 62718979 ("Makefile: Document ability to make file.lst and file.S") document ability to make file.S, but there isn't such ability in kbuild, so revert it. Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Michal Marek authored
commit a85a41ed upstream. Based on a x86-only patch by Andy Lutomirski <luto@amacapital.net> With modular kernels, 'make install' is going to need the installed modules at some point to generate the initramfs. Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Ashish Samant authored
commit d21c353d upstream. If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reported-by:
Saar Maoz <saar.maoz@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by:
-
Joseph Qi authored
commit e6f0c6e6 upstream. Commit ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
