- 27 Jul, 2018 40 commits
-
-
Rui Miguel Silva authored
This patch adds V4L2 sub-device driver for OV2680 image sensor. The OV2680 is a 1/5" CMOS color sensor from Omnivision. Supports output format: 10-bit Raw RGB. The OV2680 has a single lane MIPI interface. The driver exposes following V4L2 controls: - auto/manual exposure, - exposure, - auto/manual gain, - gain, - horizontal/vertical flip, - test pattern menu. Supported resolution are only: QUXGA, 720P, UXGA. [Sakari Ailus: Drop "-level" from Kconfig help text] Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Rui Miguel Silva authored
Add device tree binding documentation for the OV2680 camera sensor. [Sakari Ailus: Squash MAINTAINERS entry from Rui] CC: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jacopo Mondi authored
Add V4L2 sensor driver for Aptina MT9V111 CMOS image sensor. The MT9V111 is a 1/4-Inch CMOS image sensor based on MT9V011 with an integrated Image Flow Processor. Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Jacopo Mondi authored
Add documentation for Aptina MT9V111 image sensor. Reviewed-by:
-
Sakari Ailus authored
The dw9807 contains a voice coil lens driver as well as an EEPROM. This driver is just for the VCM. Reflect this in the driver's name --- this is already the case for the compatible string, for instance. Signed-off-by:
-
Niklas Söderlund authored
Latest errata document updates the start procedure for V3M. This change in addition to adhering to the datasheet update fixes capture on early revisions of V3M. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jia-Ju Bai authored
ivtv_probe() and ivtvfb_init_card() are never called in atomic context. They call kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
dvb_register() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
cx88_card_setup_pre_i2c() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
cx25821_gpio_init(), cx25821_initialize() and cx25821_registers_init() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
cx23885_reset() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
cx23885_gpio_setup() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
altera_ci_slot_reset() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
cobalt_probe() is never called in atomic context. It calls kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
vs6624_probe() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
adv7842_ddr_ram_test() is never called in atomic context. It only calls from: adv7842_ddr_ram_test() <- adv7842_command_ram_test() <- adv7842_ioctl() adv7842_ddr_ram_test() calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Matt Ranostay authored
PTR_ERR was making any pointer passed an error pointer, and should be replaced with PTR_ERR_OR_ZERO which checks if is an actual error condition. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Niklas Söderlund authored
Implement g_frame_interval to return the current standard's frame interval. Signed-off-by:
-
Niklas Söderlund authored
The ADV7180 and ADV7182 transmit whole fields, bottom field followed by top (or vice-versa, depending on detected video standard). So for chips that do not have support for explicitly setting the field mode via I2P, set the field mode to V4L2_FIELD_ALTERNATE. I2P converts fields into frames using an edge adaptive algorithm. The frame rate is the same as the 'field rate': e.g. X fields per second are now X frames per second. Signed-off-by:
-
Ezequiel Garcia authored
In rga_remove(), dma_free_attrs is being passed the wrong cpu address, which triggers an exception if the driver is removed. Fix it. Tested on a RK3399 platform, with a bind/unbind cycle. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Hans Verkuil authored
The media.h public header is one of only three public headers that include linux/version.h. Drop it from media.h. It was only used for an obsolete define. It has to be added to media-device.c, since that source relied on media.h to include it. Acked-by:
-
Nicolas Dufresne authored
The vivid driver will overlay stream time on generated frames. Though, in interlacing mode V4L2_FIELD_ALTERNATE, each field is separate and must have the same time to ensure proper render. Though, this time was only updated every 2 frames as the code was checking against the wrong counter (frame counter rather then field counter). Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This was kept just for backward compatibility. Solves this warning: media.h.rst:6: WARNING: undefined label: media-ent-f-dtv-decoder (if the link has no caption the label must precede a section header) Signed-off-by: -
Philipp Zabel authored
The CODA7541 firmware does not set the SPS frame cropping fields to properly describe coded h.264 streams with frame sizes that are not a multiple of the macroblock size. This adds RBSP parsing code and a SPS fixup routine to manually replace the cropping information in the headers produced by the firmware with the correct values. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> [hans.verkuil@cisco.com: added explanation of SPS RBSP to comment] Signed-off-by:
-
Philipp Zabel authored
When encoding h.264, if visible resolution is not aligned to macroblock size, frame cropping has to be set in the SPS header to produce correct streams. The CODA960 firmware can do this on its own if asked to. Signed-off-by:
-
Hans Verkuil authored
Fix these warnings when building the documentation: media.h.rst:6: WARNING: undefined label: media-ent-f-dv-decoder (if the link has no caption the label must precede a section header) media.h.rst:6: WARNING: undefined label: media-ent-f-dv-encoder (if the link has no caption the label must precede a section header) media.h.rst:6: WARNING: undefined label: media-ent-f-dv-decoder (if the link has no caption the label must precede a section header) Signed-off-by:
-
Katsuhiro Suzuki authored
This patch fixes crystal frequency setting when power on this device. Signed-off-by:
Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Kieran Bingham authored
In commit 2d9445db ("media: vsp1: Use reference counting for bodies"), a new field was introduced to the vsp1_dl_body structure to account for usage tracking of the body. Document the newly added field in the kerneldoc. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
-
Mauro Carvalho Chehab authored
No upstream drivers use it. It doesn't make any sense to have a compat32 code for something that nobody uses upstream. Reported-by:
Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Guennadi Liakhovetski authored
UVC defines a method of handling asynchronous controls, which sends a USB packet over the interrupt pipe. This patch implements support for such packets by sending a control event to the user. Since this can involve USB traffic and, therefore, scheduling, this has to be done in a work queue. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
When a command ends up in a STALL on the control pipe, use the Request Error Code control to provide a more precise error information to the user. For example, if a camera is still busy processing a control, when the same or an interrelated control set request arrives, the camera can react with a STALL and then return the "Not ready" status in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this patch the user would then get an EBUSY error code instead of a generic EPIPE. Signed-off-by:
-
Guennadi Liakhovetski authored
Event subscribers cannot have a NULL file handle. They are only added at a single location in the code, and the .fh pointer is used without checking there. Signed-off-by:
-
Nicolas Dufresne authored
Just like for ISOC, validate the decoded BULK buffer size when possible. This avoids sending corrupted or partial buffers to userspace, which may lead to application crash or run-time failure. Signed-off-by:
-
Laurent Pinchart authored
Add support for the 8-bit IR format GUID defined in the Microsoft Kernel Streaming Media API. Reported-by:
Paul Menzel <pmenzel+linux-media@molgen.mpg.de> Signed-off-by:
-
Kieran Bingham authored
Provide the missing 't' from straightforward. Signed-off-by:
-
Mauro Carvalho Chehab authored
Right now, the code that calculates alternate modes is not ready for devices with dual tuners. That's ok, as we currently don't have any such devices, but better to add a warning for such case, as, if anyone adds such device, the logic will need to be reviewed. Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Brad Love authored
Half-revert: commit 5b1a270d ("media: dvb: add alternative USB PID for Hauppauge WinTV-soloHD")' The PID already exists on the line above. Signed-off-by:
Michael Ira Krufky <mkrufky@gmail.com> Signed-off-by:
-
Brad Love authored
During the duplication of em28xx state for the second tuner pair a pointer to alt_max_pkt_size_isoc is copied. During tear down the second tuner is destroyed first and kfrees alt_max_pkt_size_isoc, then the first tuner is destroyed and kfrees it again. The property should only be kfree'd if the tuner is PRIMARY_TS. [ 354.888560] ------------[ cut here ]------------ [ 354.888562] kernel BUG at mm/slub.c:296! [ 354.888574] invalid opcode: 0000 [#1] SMP NOPTI [ 354.888869] CPU: 1 PID: 19 Comm: kworker/1:0 Not tainted 4.18.0-rc1+ #20 [ 354.889140] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018 [ 354.889408] Workqueue: usb_hub_wq hub_event [ 354.889679] RIP: 0010:__slab_free+0x217/0x370 [ 354.889942] Code: bb c0 e8 07 41 38 c7 72 39 48 83 c4 70 5b 41 5a 41 5c 41 5d 41 5e 41 5f 5d 49 8d 62 f8 c3 f3 90 49 8b 04 24 a8 01 75 f6 eb 82 <0f> 0b 44 89 45 80 48 89 4d 88 e8 aa fa ff ff 85 c0 74 cc e9 b7 fe [ 354.890598] RSP: 0018:ffffb84c41a4fad0 EFLAGS: 00010246 [ 354.890934] RAX: ffff948646e85150 RBX: ffff948646e85150 RCX: ffff948646e85150 [ 354.891280] RDX: 00000000820001d9 RSI: fffffa8fd01ba140 RDI: ffff94865e807c00 [ 354.891649] RBP: ffffb84c41a4fb70 R08: 0000000000000001 R09: ffffffffc059ce21 [ 354.892025] R10: ffff948646e85150 R11: 0000000000000001 R12: fffffa8fd01ba140 [ 354.892403] R13: ffff948646e85150 R14: ffff94865e807c00 R15: ffff94864c92e0a0 [ 354.892780] FS: 0000000000000000(0000) GS:ffff94865ec40000(0000) knlGS:0000000000000000 [ 354.893150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 354.893530] CR2: 00007f4e476da950 CR3: 000000040112c000 CR4: 00000000003406e0 [ 354.893917] Call Trace: [ 354.894315] ? __dev_printk+0x3c/0x80 [ 354.894695] ? _dev_info+0x64/0x80 [ 354.895082] ? em28xx_free_device+0x41/0x50 [em28xx] [ 354.895464] kfree+0x17a/0x190 [ 354.895852] ? kfree+0x17a/0x190 [ 354.896310] em28xx_free_device+0x41/0x50 [em28xx] [ 354.896698] em28xx_usb_disconnect+0xfa/0x110 [em28xx] [ 354.897083] usb_unbind_interface+0x7a/0x270 [ 354.897475] device_release_driver_internal+0x17c/0x250 [ 354.897864] device_release_driver+0x12/0x20 [ 354.898252] bus_remove_device+0xec/0x160 [ 354.898639] device_del+0x13d/0x320 [ 354.899018] ? usb_remove_ep_devs+0x1f/0x30 [ 354.899392] usb_disable_device+0x9e/0x270 [ 354.899772] usb_disconnect+0x92/0x2a0 [ 354.900149] hub_event+0x98e/0x1650 [ 354.900519] ? sched_clock_cpu+0x11/0xa0 [ 354.900890] process_one_work+0x167/0x3f0 [ 354.901251] worker_thread+0x4d/0x460 [ 354.901610] kthread+0x105/0x140 [ 354.901964] ? rescuer_thread+0x360/0x360 [ 354.902318] ? kthread_associate_blkcg+0xa0/0xa0 [ 354.902672] ret_from_fork+0x22/0x40 [ 354.903024] Modules linked in: rc_hauppauge em28xx_rc rc_core si2157 lgdt3306a i2c_mux em28xx_dvb dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_common snd_hda_codec_hdmi nls_iso8859_1 edac_mce_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi aesni_intel snd_seq_midi_event aes_x86_64 snd_rawmidi crypto_simd em28xx cryptd glue_helper asix tveeprom usbnet snd_seq v4l2_common mii videodev snd_seq_device media input_leds snd_timer joydev ccp k10temp wmi_bmof snd soundcore mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables vfio_pci vfio_virqfd irqbypass vfio_iommu_type1 vfio nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops i2c_piix4 drm ahci libahci [ 354.905129] wmi gpio_amdpt gpio_generic hid_generic usbhid hid [ 354.908140] ---[ end trace c230d02716298c34 ]--- [ 354.908145] RIP: 0010:__slab_free+0x217/0x370 [ 354.908147] Code: bb c0 e8 07 41 38 c7 72 39 48 83 c4 70 5b 41 5a 41 5c 41 5d 41 5e 41 5f 5d 49 8d 62 f8 c3 f3 90 49 8b 04 24 a8 01 75 f6 eb 82 <0f> 0b 44 89 45 80 48 89 4d 88 e8 aa fa ff ff 85 c0 74 cc e9 b7 fe [ 354.908183] RSP: 0018:ffffb84c41a4fad0 EFLAGS: 00010246 [ 354.908186] RAX: ffff948646e85150 RBX: ffff948646e85150 RCX: ffff948646e85150 [ 354.908189] RDX: 00000000820001d9 RSI: fffffa8fd01ba140 RDI: ffff94865e807c00 [ 354.908191] RBP: ffffb84c41a4fb70 R08: 0000000000000001 R09: ffffffffc059ce21 [ 354.908193] R10: ffff948646e85150 R11: 0000000000000001 R12: fffffa8fd01ba140 [ 354.908195] R13: ffff948646e85150 R14: ffff94865e807c00 R15: ffff94864c92e0a0 [ 354.908198] FS: 0000000000000000(0000) GS:ffff94865ec40000(0000) knlGS:0000000000000000 [ 354.908201] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 354.908203] CR2: 00007f4e476da950 CR3: 000000016b20a000 CR4: 00000000003406e0 Signed-off-by:
-
Brad Love authored
Addresses the following, which introduced a regression itself: Commit 509f8965 ("media: em28xx: fix a regression with HVR-950") The regression fix breaks dual transport stream support. Currently, when a tuner starts streaming it sets alt mode on the USB interface. The problem is, in a dual tuner model, both tuners share the same USB interface, so when the second tuner becomes active and sets alt mode on the interface it kills streaming on the other port. This patch addresses the regression by only setting alt mode on the USB interface during em28xx_start_streaming, if the device is not a dual tuner model. This allows all older and single tuner devices to explicitly set alt mode during stream startup. Testers report both isoc and bulk DualHD models work correctly with the alt mode set only once, in em28xx_dvb_init. Fixes: 509f8965 ("media: em28xx: fix a regression with HVR-950") Signed-off-by:
-
Hans Verkuil authored
'current' is also defined in asm-generic/current.h. When compiling this driver for older kernels with the media_build system, this header is included via compat.h and it no longer compiles. Rename current to cur. Signed-off-by:
-
