- 22 Jun, 2018 3 commits
-
-
Jan Kara authored
syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was WB_shutting_down after wb->bdi->dev became NULL. This indicates that unregister_bdi() failed to call wb_shutdown() on one of wb objects. The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus drops bdi's reference to wb structures before going through the list of wbs again and calling wb_shutdown() on each of them. This way the loop iterating through all wbs can easily miss a wb if that wb has already passed through cgwb_remove_from_bdi_list() called from wb_shutdown() from cgwb_release_workfn() and as a result fully shutdown bdi although wb_workfn() for this wb structure is still running. In fact there are also other ways cgwb_bdi_unregister() can race with cgwb_release_workfn() leading e.g. to use-after-free issues: CPU1 CPU2 cgwb_bdi_unregister() cgwb_kill(*slot); cgwb_release() queue_work(cgwb_release_wq, &wb->release_work); cgwb_release_workfn() wb = list_first_entry(&bdi->wb_list, ...) spin_unlock_irq(&cgwb_lock); wb_shutdown(wb); ... kfree_rcu(wb, rcu); wb_shutdown(wb); -> oops use-after-free We solve these issues by synchronizing writeback structure shutdown from cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That way we also no longer need synchronization using WB_shutting_down as the mutex provides it for CONFIG_CGROUP_WRITEBACK case and without CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from bdi_unregister(). Reported-by:syzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Geert Uytterhoeven authored
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "Various relatively small fixes, mostly to fix error handling of various sorts." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-pci: limit max IO size and segments to avoid high order allocations nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl nvme-fc: release io queues to allow fast fail nvmet: reset keep alive timer in controller enable nvme-rdma: don't override opts->queue_size nvme-rdma: Fix command completion race at error recovery nvme-rdma: fix possible free of a non-allocated async event buffer nvme-rdma: fix possible double free condition when failing to create a controller
-
- 21 Jun, 2018 4 commits
-
-
Jens Axboe authored
nvme requires an sg table allocation for each request. If the request is large, then the allocation can become quite large. For instance, with our default software settings of 1280KB IO size, we'll need 10248 bytes of sg table. That turns into a 2nd order allocation, which we can't always guarantee. If we fail the allocation, blk-mq will retry it later. But there's no guarantee that we'll EVER be able to allocate that much contigious memory. Limit the IO size such that we never need more than a single page of memory. That's a lot faster and more reliable. Then back that allocation with a mempool, so that we know we'll always be able to succeed the allocation at some point. Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Jianchao Wang authored
There is race between nvme_remove and nvme_reset_work that can lead to io hang. nvme_remove nvme_reset_work -> nvme_remove_dead_ctrl -> nvme_dev_disable -> quiesce request_queue -> queue remove_work -> cancel_work_sync reset_work -> nvme_remove_namespaces -> splice ctrl->namespaces nvme_remove_dead_ctrl_work -> nvme_kill_queues -> nvme_ns_remove do nothing -> blk_cleanup_queue -> blk_freeze_queue Finally, the request_queue is quiesced state when wait freeze, we will get io hang here. To fix it, move the nvme_kill_queues from nvme_remove_dead_ctrl_work to nvme_remove_dead_ctrl. Suggested-by:Keith Busch <keith.busch@linux.intel.com> Signed-off-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by:
-
James Smart authored
Rather than leaving io queues quiesced after tearing down an association, restart them. This allows ios to be replayed, with fastfail ios terminating and non-fastfail getting into loops of retry. This follows rdma's lead. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Sagi Grimberg <sagi@grimber.me> Signed-off-by:
-
Doron Roberts-Kedes authored
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will issue a disconnect from nbd_release if the device has no remaining bdev->bd_openers. Fix ret val so reconfigure with only setting the flag succeeds. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by:
-
- 20 Jun, 2018 7 commits
-
-
Dan Carpenter authored
resp->num is the number of tokens in resp->tok[]. It gets set in response_parse(). So if n == resp->num then we're reading beyond the end of the data. Fixes: 455a7b23 ("block: Add Sed-opal library") Reviewed-by:
Scott Bauer <scott.bauer@intel.com> Tested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
If rq_state == ARRAY_SIZE() then we read one element beyond the end of the blk_mq_rq_state_name_array[] array. Fixes: ec6dcf63 ("blk-mq-debugfs: Show more request state information") Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Max Gurtuvoy authored
Controllers that are not yet enabled should not really enforce keep alive timeouts, but we still want to track a timeout and cleanup in case a host died before it enabled the controller. Hence, simply reset the keep alive timer when the controller is enabled. Suggested-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Sagi Grimberg authored
That is user argument, and theoretically controller limits can change over time (over reconnects/resets). Instead, use the sqsize controller attribute to check queue depth boundaries and use it to the tagset allocation. Signed-off-by:
-
Israel Rukshin authored
The race is between completing the request at error recovery work and rdma completions. If we cancel the request before getting the good rdma completion we get a NULL deref of the request MR at nvme_rdma_process_nvme_rsp(). When Canceling the request we return its mr to the mr pool (set mr to NULL) and also unmap its data. Canceling the requests while the rdma queues are active is not safe. Because rdma queues are active and we get good rdma completions that can use the mr pointer which may be NULL. Completing the request too soon may lead also to performing DMA to/from user buffers which might have been already unmapped. The commit fixes the race by draining the QP before starting the abort commands mechanism. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
-
Sagi Grimberg authored
If nvme_rdma_configure_admin_queue fails before we allocated the async event buffer, we will falsly free it because nvme_rdma_free_queue is freeing it. Fix it by allocating the buffer right after nvme_rdma_alloc_queue and free it right before nvme_rdma_queue_free to maintain orderly reverse cleanup sequence. Reported-by:
-
Sagi Grimberg authored
Failures after nvme_init_ctrl will defer resource cleanups to .free_ctrl when the reference is released, hence we should not free the controller queues for these failures. Fix that by moving controller queues allocation before controller initialization and correctly freeing them for failures before initialization and skip them for failures after initialization. Signed-off-by:
-
- 19 Jun, 2018 2 commits
-
-
Bart Van Assche authored
Commit 0ba99ca4 ("block: Add warning for bi_next not NULL in bio_endio()") breaks the dm driver. end_clone_bio() detects whether or not a bio is the last bio associated with a request by checking the .bi_next field. Commit 0ba99ca4 clears that field before end_clone_bio() has had a chance to inspect that field. Hence revert commit 0ba99ca4. This patch avoids that KASAN reports the following complaint when running the srp-test software (srp-test/run_tests -c -d -r 10 -t 02-mq): ================================================================== BUG: KASAN: use-after-free in bio_advance+0x11b/0x1d0 Read of size 4 at addr ffff8801300e06d0 by task ksoftirqd/0/9 CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.18.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 bio_advance+0x11b/0x1d0 blk_update_request+0xa7/0x5b0 scsi_end_request+0x56/0x320 [scsi_mod] scsi_io_completion+0x7d6/0xb20 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] blk_mq_complete_request+0x160/0x240 scsi_mq_done+0x50/0x1a0 [scsi_mod] srp_recv_done+0x515/0x1330 [ib_srp] __ib_process_cq+0xa0/0xf0 [ib_core] ib_poll_handler+0x38/0xa0 [ib_core] irq_poll_softirq+0xe8/0x1f0 __do_softirq+0x128/0x60d run_ksoftirqd+0x3f/0x60 smpboot_thread_fn+0x352/0x460 kthread+0x1c1/0x1e0 ret_from_fork+0x24/0x30 Allocated by task 1918: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x11/0x20 kmem_cache_alloc+0xfe/0x350 mempool_alloc_slab+0x15/0x20 mempool_alloc+0xfb/0x270 bio_alloc_bioset+0x244/0x350 submit_bh_wbc+0x9c/0x2f0 __block_write_full_page+0x299/0x5a0 block_write_full_page+0x16b/0x180 blkdev_writepage+0x18/0x20 __writepage+0x42/0x80 write_cache_pages+0x376/0x8a0 generic_writepages+0xbe/0x110 blkdev_writepages+0xe/0x10 do_writepages+0x9b/0x180 __filemap_fdatawrite_range+0x178/0x1c0 file_write_and_wait_range+0x59/0xc0 blkdev_fsync+0x46/0x80 vfs_fsync_range+0x66/0x100 do_fsync+0x3d/0x70 __x64_sys_fsync+0x21/0x30 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9: save_stack+0x43/0xd0 __kasan_slab_free+0x137/0x190 kasan_slab_free+0xe/0x10 kmem_cache_free+0xd3/0x380 mempool_free_slab+0x17/0x20 mempool_free+0x63/0x160 bio_free+0x81/0xa0 bio_put+0x59/0x60 end_bio_bh_io_sync+0x5d/0x70 bio_endio+0x1a7/0x360 blk_update_request+0xd0/0x5b0 end_clone_bio+0xa3/0xd0 [dm_mod] bio_endio+0x1a7/0x360 blk_update_request+0xd0/0x5b0 scsi_end_request+0x56/0x320 [scsi_mod] scsi_io_completion+0x7d6/0xb20 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] blk_mq_complete_request+0x160/0x240 scsi_mq_done+0x50/0x1a0 [scsi_mod] srp_recv_done+0x515/0x1330 [ib_srp] __ib_process_cq+0xa0/0xf0 [ib_core] ib_poll_handler+0x38/0xa0 [ib_core] irq_poll_softirq+0xe8/0x1f0 __do_softirq+0x128/0x60d The buggy address belongs to the object at ffff8801300e0640 which belongs to the cache bio-0 of size 200 The buggy address is located 144 bytes inside of 200-byte region [ffff8801300e0640, ffff8801300e0708) The buggy address belongs to the page: page:ffffea0004c03800 count:1 mapcount:0 mapping:ffff88015a563a00 index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 dead000000000100 dead000000000200 ffff88015a563a00 raw: 0000000000000000 0000000000330033 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801300e0580: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc ffff8801300e0600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8801300e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801300e0700: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801300e0780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Cc: Kent Overstreet <kent.overstreet@gmail.com> Fixes: 0ba99ca4 ("block: Add warning for bi_next not NULL in bio_endio()") Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
blk_mq_complete_request can only be called for blk-mq drivers, but when removing the BLK_EH_HANDLED return value, two legacy request timeout methods incorrectly got switched to call blk_mq_complete_request. Call __blk_complete_request instead to reinstance the previous behavior. For that __blk_complete_request needs to be exported. Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout") Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout") Reported-by:
-
- 15 Jun, 2018 6 commits
-
-
Anatoliy Glagolev authored
The existing implementation allows races between bsg_unregister and bsg_open paths. bsg_unregister and request_queue cleanup and deletion may start and complete right after bsg_get_device (in bsg_open path) retrieves bsg_class_device and releases the mutex. Then bsg_open path touches freed memory of bsg_class_device and request_queue. One possible fix is to hold the mutex all the way through bsg_get_device instead of releasing it after bsg_class_device retrieval. Reviewed-by:
Anatoliy Glagolev <glagolig@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
This function is entirely unused, so remove it and the tag_queue_busy member of struct request_queue. Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "Fix various little regressions introduced in this merge window, plus a rework of the fibre channel connect and reconnect path to share the code instead of having separate sets of bugs. Last but not least a trivial trace point addition from Hannes." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem
-
Christoph Hellwig authored
- make sure we only allow internally generates commands in any non-live state - only allow connect commands on non-live queues when actually in the new or connecting states - treat all other non-live, non-dead states the same as a default cach-all This fixes a regression where we could not shutdown a controller orderly as we didn't allow the internal generated Property Set command, and also ensures we don't accidentally let a Connect command through in the wrong state. Signed-off-by:
-
Christoph Hellwig authored
In the ADMIN_ONLY state we don't have any I/O queues, but we should accept all admin commands without further checks. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Christoph Hellwig authored
Move the is_connected check to the fibre channel transport, as it has no meaning for other transports. To facilitate this split out a new nvmf_fail_nonready_command helper that is called by the transport when it is asked to handle a command on a queue that is not ready. Also avoid a function call for the queue live fast path by inlining the check. Signed-off-by:
-
- 14 Jun, 2018 6 commits
-
-
Christoph Hellwig authored
Unused now that nvme stopped using it. Signed-off-by:
-
Christoph Hellwig authored
Unused now that all transports stopped using it. Signed-off-by:
-
James Smart authored
The reconnect path is calling the init routines to clear a queue structure. But the queue structure has state that perhaps needs to persist as long as the controller is live. Remove the nvme_fc_init_queue() calls on reconnect. The nvme_fc_free_queue() calls will clear state bits and reset any relevant queue state for a new connection. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
The reinit_request routine is not necessary. Remove support for the op callback. As all that nvme_reinit_tagset() does is itterate and call the reinit routine, it too has no purpose. Remove the call. Signed-off-by:
-
Christoph Hellwig authored
We can currently call the timeout handler again on a request that has already been handed over to the timeout handler. Prevent that with a new flag. Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce") Reported-by:
Andrew Randrianasulu <randrianasulu@gmail.com> Tested-by:
-
James Smart authored
Current code follows the framework that has been in the transports from the beginning where initial link-side controller connect occurs as part of "creating the controller". Thus that first connect fully talks to the controller and obtains values that can then be used in for blk-mq setup, etc. It also means that everything about the controller is fully know before the "create controller" call returns. This has several weaknesses: - The initial create_ctrl call made by the cli will block for a long time as wire transactions are performed synchronously. This delay becomes longer if errors occur or connectivity is lost and retries need to be performed. - Code wise, it means there is a separate connect path for initial controller connect vs the (same) steps used in the reconnect path. - And as there's separate paths, it means there's separate error handling and retry logic. It also plays havoc with the NEW state (should transition out of it after successful initial connect) vs the RESETTING and CONNECTING (reconnect) states that want to be transitioned to on error. - As there's separate paths, to recover from errors and disruptions, it requires separate recovery/retry paths as well and can severely convolute the controller state. This patch reworks the fc transport to use the same connect paths for the initial connection as it uses for reconnect. This makes a single path for error recovery and handling. This patch: - Removes the driving of the initial connect and replaces it with a state transition to CONNECTING and initiating the reconnect thread. A dummy state transition of RESETTING had to be traversed as a direct transtion of NEW->CONNECTING is not allowed. Given that the controller is "new", the RESETTING transition is a simple no-op. Once in the reconnecting thread, the normal behaviors of ctrl_loss_tmo (max_retries * connect_delay) and dev_loss_tmo will apply before the controller is torn down. - Only if the state transitions couldn't be traversed and the reconnect thread not scheduled, will the controller be torn down while in create_ctrl. - The prior code used the controller state of NEW to indicate whether request queues had been initialized or not. For the admin queue, the request queue is always created, so there's no need to check a state. For IO queues, change to tracking whether a successful io request queue create has occurred (e.g. 1st successful connect). - The initial controller id is initialized to the dynamic controller id used in the initial connect message. It will be overwritten by the real controller id once the controller is connected on the wire. Signed-off-by:
-
- 13 Jun, 2018 1 commit
-
-
Christoph Hellwig authored
Don't optimize our namespace rescan based on the changed namespace list log page as userspace might have changed the content through reading it. Suggested-by:
-
- 11 Jun, 2018 6 commits
-
-
Chaitanya Kulkarni authored
Free smart-log buffer allocated in the function after use. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Max Gurtovoy authored
After dma mapping the sgl, we map the sgl to nvme sgl descriptor. In case of failure during the last mapping we never dma unmap the sgl. Signed-off-by:
-
Hannes Reinecke authored
Adding a tracepoint to trace bio remapping for native nvme multipath. Signed-off-by:
-
Israel Rukshin authored
When using nvme-pci driver the nvmf_ctrl_options is NULL. There is no need to check for discovery_nqn flag at non-fabrics controller. Fixes: 181303d0 ("nvme-fabrics: allow duplicate connections to the discovery controller") Signed-off-by:
-
Roman Pen authored
It is not allowed to reinit q->tag_set_list list entry while RCU grace period has not completed yet, otherwise the following soft lockup in blk_mq_sched_restart() happens: [ 1064.252652] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [fio:9270] [ 1064.254445] task: ffff99b912e8b900 task.stack: ffffa6d54c758000 [ 1064.254613] RIP: 0010:blk_mq_sched_restart+0x96/0x150 [ 1064.256510] Call Trace: [ 1064.256664] <IRQ> [ 1064.256824] blk_mq_free_request+0xea/0x100 [ 1064.256987] msg_io_conf+0x59/0xd0 [ibnbd_client] [ 1064.257175] complete_rdma_req+0xf2/0x230 [ibtrs_client] [ 1064.257340] ? ibtrs_post_recv_empty+0x4d/0x70 [ibtrs_core] [ 1064.257502] ibtrs_clt_rdma_done+0xd1/0x1e0 [ibtrs_client] [ 1064.257669] ib_create_qp+0x321/0x380 [ib_core] [ 1064.257841] ib_process_cq_direct+0xbd/0x120 [ib_core] [ 1064.258007] irq_poll_softirq+0xb7/0xe0 [ 1064.258165] __do_softirq+0x106/0x2a2 [ 1064.258328] irq_exit+0x92/0xa0 [ 1064.258509] do_IRQ+0x4a/0xd0 [ 1064.258660] common_interrupt+0x7a/0x7a [ 1064.258818] </IRQ> Meanwhile another context frees other queue but with the same set of shared tags: [ 1288.201183] INFO: task bash:5910 blocked for more than 180 seconds. [ 1288.201833] bash D 0 5910 5820 0x00000000 [ 1288.202016] Call Trace: [ 1288.202315] schedule+0x32/0x80 [ 1288.202462] schedule_timeout+0x1e5/0x380 [ 1288.203838] wait_for_completion+0xb0/0x120 [ 1288.204137] __wait_rcu_gp+0x125/0x160 [ 1288.204287] synchronize_sched+0x6e/0x80 [ 1288.204770] blk_mq_free_queue+0x74/0xe0 [ 1288.204922] blk_cleanup_queue+0xc7/0x110 [ 1288.205073] ibnbd_clt_unmap_device+0x1bc/0x280 [ibnbd_client] [ 1288.205389] ibnbd_clt_unmap_dev_store+0x169/0x1f0 [ibnbd_client] [ 1288.205548] kernfs_fop_write+0x109/0x180 [ 1288.206328] vfs_write+0xb3/0x1a0 [ 1288.206476] SyS_write+0x52/0xc0 [ 1288.206624] do_syscall_64+0x68/0x1d0 [ 1288.206774] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 What happened is the following: 1. There are several MQ queues with shared tags. 2. One queue is about to be freed and now task is in blk_mq_del_queue_tag_set(). 3. Other CPU is in blk_mq_sched_restart() and loops over all queues in tag list in order to find hctx to restart. Because linked list entry was modified in blk_mq_del_queue_tag_set() without proper waiting for a grace period, blk_mq_sched_restart() never ends, spining in list_for_each_entry_rcu_rr(), thus soft lockup. Fix is simple: reinit list entry after an RCU grace period elapsed. Fixes: Fixes: 705cda97 ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") Cc: stable@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-block@vger.kernel.org Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix several bpfilter/UMH bugs, in particular make the UMH build not depend upon X86 specific Kconfig symbols. From Alexei Starovoitov. 2) Fix handling of modified context pointer in bpf verifier, from Daniel Borkmann. 3) Kill regression in ifdown/ifup sequences for hv_netvsc driver, from Dexuan Cui. 4) When the bonding primary member name changes, we have to re-evaluate the bond->force_primary setting, from Xiangning Yu. 5) Eliminate possible padding beyone end of SKB in cdc_ncm driver, from Bjørn Mork. 6) RX queue length reported for UDP sockets in procfs and socket diag are inaccurate, from Paolo Abeni. 7) Fix br_fdb_find_port() locking, from Petr Machata. 8) Limit sk_rcvlowat values properly in TCP, from Soheil Hassas Yeganeh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits) tcp: limit sk_rcvlowat by the maximum receive buffer net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620 socket: close race condition between sock_close() and sockfs_setattr() net: bridge: Fix locking in br_fdb_find_port() udp: fix rx queue len reported by diag and proc interface cdc_ncm: avoid padding beyond end of skb net/sched: act_simple: fix parsing of TCA_DEF_DATA net: fddi: fix a possible null-ptr-deref net: aquantia: fix unsigned numvecs comparison with less than zero net: stmmac: fix build failure due to missing COMMON_CLK dependency bpfilter: fix race in pipe access bpf, xdp: fix crash in xdp_umem_unaccount_pages xsk: Fix umem fill/completion queue mmap on 32-bit tools/bpf: fix selftest get_cgroup_id_user bpfilter: fix OUTPUT_FORMAT umh: fix race condition net: mscc: ocelot: Fix uninitialized error in ocelot_netdevice_event() bonding: re-evaluate force_primary when the primary slave name changes ip_tunnel: Fix name string concatenate in __ip_tunnel_create() hv_netvsc: Fix a network regression after ifdown/ifup ...
-
- 10 Jun, 2018 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Setting the supported range from drivers for RTCs failing soon has started. A few fixes are developed along the way. Some drivers have been switched to SPDX by their maintainers. Subsystem: - rework of the rtc-test driver which allows to test the core more thoroughly - rtc_set_alarm() now fails early when alarms are not supported Drivers: - mktime() is now replaced by mktime64() - RTC range added for 88pm80x, ab-b5ze-s3, at91rm9200, brcmstb-waketimer, ds1685, ftrtc010, ls1x, mxc_v2, rx8581, sprd, st-lpc, tps6586x, tps65910 and vr41xx - fixed a possible race condition in probe functions - pxa: fix the probe function that is broken since v4.3 - stm32: now supports stm32mp1" * tag 'rtc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (78 commits) rtc: pxa: fix probe function rtc: cros-ec: Switch to SPDX identifier. rtc: cros-ec: Make license text and module license match. rtc: ensure rtc_set_alarm fails when alarms are not supported rtc: test: remove alarm support from the first device rtc: test: convert to devm_rtc_allocate_device rtc: ftrtc010: let the core handle range rtc: ftrtc010: handle dates after 2106 rtc: ftrtc010: switch to devm_rtc_allocate_device rtc: mrst: switch to devm functions rtc: sunxi: fix possible race condition rtc: test: remove irq sysfs file rtc: test: emulate alarms using timers rtc: test: store time as an offset to system time rtc: test: allow registering many devices rtc: test: remove useless proc info rtc: ds1685: Add range rtc: ds1685: fix possible race condition rtc: sprd: Add new RTC power down check method rtc: sun6i: Fix bit_idx value for clk_register_gate ... -
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI and UBIFS updates from Richard Weinberger: - the UBI on-disk format header file is now dual licensed - new way to detect Fastmap problems during runtime - bugfix for Fastmap - minor updates for UBIFS (spelling, comments, vm_fault_t, ...) * tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs: mtd: ubi: Update ubi-media.h to dual license ubi: fastmap: Detect EBA mismatches on-the-fly ubi: fastmap: Check each mapping only once ubi: fastmap: Correctly handle interrupted erasures in EBA ubi: fastmap: Cancel work upon detach ubifs: lpt: Fix wrong pnode number range in comment ubifs: gc: Fix typo ubifs: log: Some spelling fixes ubifs: Spelling fix someting -> something ubifs: journal: Remove wrong comment ubifs: remove set but never used variable ubifs, xattr: remove misguided quota flags fs: ubifs: Adding new return type vm_fault_t
-
Soheil Hassas Yeganeh authored
The user-provided value to setsockopt(SO_RCVLOWAT) can be larger than the maximum possible receive buffer. Such values mute POLLIN signals on the socket which can stall progress on the socket. Limit the user-provided value to half of the maximum receive buffer, i.e., half of sk_rcvbuf when the receive buffer size is set by the user, or otherwise half of sysctl_tcp_rmem[2]. Fixes: d1361840 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
-
Alvaro Gamez Machado authored
DP83620 register set is compatible with the DP83848, but it also supports 100base-FX. When the hardware is configured such as that fiber mode is enabled, autonegotiation is not possible. The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE. Instead, this bit is always set high, even if the particular hardware configuration makes it so that auto negotiation is not possible [1]. Under these circumstances, the phy subsystem keeps trying for autonegotiation to happen, without success. Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on reset is set to 0 when auto negotiation is disabled, and so we use this value instead of BMSR_ANEGCAPABLE. [1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170Signed-off-by:
Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by:
-
