- 18 Aug, 2017 4 commits
-
-
Denys Vlasenko authored
With lightly tweaked defconfig: text data bss dec hex filename 11259661 5109408 2981888 19350957 12745ad vmlinux.before 11259661 5109408 884736 17253805 10745ad vmlinux.after Only compile-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
Paolo Bonzini authored
There is currently some confusion between nested and L1 GPAs. The assignment to "direct" in kvm_mmu_page_fault tries to fix that, but it is not enough. What this patch does is fence off the MMIO cache completely when using shadow nested page tables, since we have neither a GVA nor an L1 GPA to put in the cache. This also allows some simplifications in kvm_mmu_page_fault and FNAME(page_fault). The EPT misconfig likewise does not have an L1 GPA to pass to kvm_io_bus_write, so that must be skipped for guest mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [Changed comment to say "GPAs" instead of "L1's physical addresses", as per David's review. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
Brijesh Singh authored
When a guest causes a page fault which requires emulation, the vcpu->arch.gpa_available flag is set to indicate that cr2 contains a valid GPA. Currently, emulator_read_write_onepage() makes use of gpa_available flag to avoid a guest page walk for a known MMIO regions. Lets not limit the gpa_available optimization to just MMIO region. The patch extends the check to avoid page walk whenever gpa_available flag is set. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [Fix EPT=0 according to Wanpeng Li's fix, plus ensure VMX also uses the new code. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [Moved "ret < 0" to the else brach, as per David's review. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
Paolo Bonzini authored
Calling handle_mmio_page_fault() has been unnecessary since commit e9ee956e ("KVM: x86: MMU: Move handle_mmio_page_fault() call to kvm_mmu_page_fault()", 2016-02-22). handle_mmio_page_fault() can now be made static. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
- 15 Aug, 2017 1 commit
-
-
Arnd Bergmann authored
When PAGE_OFFSET is not a compile-time constant, we run into warnings from the use of kvm_is_error_hva() that the compiler cannot optimize out: arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function '__kvm_gfn_to_hva_cache_init': arch/arm/kvm/../../../virt/kvm/kvm_main.c:1978:14: error: 'nr_pages_avail' may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function 'gfn_to_page_many_atomic': arch/arm/kvm/../../../virt/kvm/kvm_main.c:1660:5: error: 'entry' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds fake initializations to the two instances I ran into. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
- 11 Aug, 2017 5 commits
-
-
Jim Mattson authored
Host-initiated writes to the IA32_APIC_BASE MSR do not have to follow local APIC state transition constraints, but the value written must be valid. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Bailing out immediately if there is no available mmu page to alloc. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [warn_test:3089] irq event stamp: 20532 hardirqs last enabled at (20531): [<ffffffff8e9b6908>] restore_regs_and_iret+0x0/0x1d hardirqs last disabled at (20532): [<ffffffff8e9b7ae8>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (8266): [<ffffffff8e9badc6>] __do_softirq+0x206/0x4c1 softirqs last disabled at (8253): [<ffffffff8e083918>] irq_exit+0xf8/0x100 CPU: 5 PID: 3089 Comm: warn_test Tainted: G OE 4.13.0-rc3+ #8 RIP: 0010:kvm_mmu_prepare_zap_page+0x72/0x4b0 [kvm] Call Trace: make_mmu_pages_available.isra.120+0x71/0xc0 [kvm] kvm_mmu_load+0x1cf/0x410 [kvm] kvm_arch_vcpu_ioctl_run+0x1316/0x1bf0 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 This can be reproduced readily by ept=N and running syzkaller tests since many syzkaller testcases don't setup any memory regions. However, if ept=Y rmode identity map will be created, then kvm_mmu_calculate_mmu_pages() will extend the number of VM's mmu pages to at least KVM_MIN_ALLOC_MMU_PAGES which just hide the issue. I saw the scenario kvm->arch.n_max_mmu_pages == 0 && kvm->arch.n_used_mmu_pages == 1, so there is one active mmu page on the list, kvm_mmu_prepare_zap_page() fails to zap any pages, however prepare_zap_oldest_mmu_page() always returns true. It incurs infinite loop in make_mmu_pages_available() which causes mmu->lock softlockup. This patch fixes it by setting the return value of prepare_zap_oldest_mmu_page() according to whether or not there is mmu page zapped. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
David Hildenbrand authored
Let's reuse the function introduced with eptp switching. We don't explicitly have to check against enable_ept_ad_bits, as this is implicitly done when checking against nested_vmx_ept_caps in valid_ept_address(). Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrew Jones authored
Remove nonexistent files, allow less awkward expressions when extracting arch-specific information, and only return relevant information when using arch-specific expressions. Additionally add include/trace/events/kvm.h, arch/*/include/uapi/asm/kvm*, and arch/powerpc/kernel/kvm* to appropriate sections. The arch- specific expressions are now: /KVM/ -- All KVM /\(KVM\)|\(KVM\/x86\)/ -- X86 /\(KVM\)|\(KVM\/x86\)|\(KVM\/amd\)/ -- X86 plus AMD /\(KVM\)|\(KVM\/arm\)/ -- ARM /\(KVM\)|\(KVM\/arm\)|\(KVM\/arm64\)/ -- ARM plus ARM64 /\(KVM\)|\(KVM\/powerpc\)/ -- POWERPC /\(KVM\)|\(KVM\/s390\)/ -- S390 /\(KVM\)|\(KVM\/mips\)/ -- MIPS Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 10 Aug, 2017 3 commits
-
-
Paolo Bonzini authored
This is the same as commit 14727754 ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23), but for Intel processors. In this case, the exit qualification field's bit 8 says whether the EPT violation occurred while translating the guest's final physical address or rather while translating the guest page tables. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Brijesh Singh authored
Commit 14727754 ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23) added a new error code to aid nested page fault handling. The commit unprotects (kvm_mmu_unprotect_page) the page when we get a NPF due to guest page table walk where the page was marked RO. However, if an L0->L2 shadow nested page table can also be marked read-only when a page is read only in L1's nested page table. If such a page is accessed by L2 while walking page tables it can cause a nested page fault (page table walks are write accesses). However, after kvm_mmu_unprotect_page we may get another page fault, and again in an endless stream. To cover this use case, we qualify the new error_code check with vcpu->arch.mmu_direct_map so that the error_code check would run on L1 guest, and not the L2 guest. This avoids hitting the above scenario. Fixes: 14727754 Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Reported by syzkaller: The kvm-intel.unrestricted_guest=0 WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] CPU: 5 PID: 1014 Comm: warn_test Tainted: G W OE 4.13.0-rc3+ #8 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] Call Trace: ? put_pid+0x3a/0x50 ? rcu_read_lock_sched_held+0x79/0x80 ? kmem_cache_free+0x2f2/0x350 kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 The syszkaller folks reported a residual mmio emulation request to userspace due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs several threads to launch the same vCPU, the thread which lauch this vCPU after the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will trigger the warning. #define _GNU_SOURCE #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> #include <linux/kvm.h> #include <stdio.h> int kvmcpu; struct kvm_run *run; void* thr(void* arg) { int res; res = ioctl(kvmcpu, KVM_RUN, 0); printf("ret1=%d exit_reason=%d suberror=%d\n", res, run->exit_reason, run->internal.suberror); return 0; } void test() { int i, kvm, kvmvm; pthread_t th[4]; kvm = open("/dev/kvm", O_RDWR); kvmvm = ioctl(kvm, KVM_CREATE_VM, 0); kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0); run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0); srand(getpid()); for (i = 0; i < 4; i++) { pthread_create(&th[i], 0, thr, 0); usleep(rand() % 10000); } for (i = 0; i < 4; i++) pthread_join(th[i], 0); } int main() { for (;;) { int pid = fork(); if (pid < 0) exit(1); if (pid == 0) { test(); exit(0); } int status; while (waitpid(pid, &status, __WALL) != pid) {} } return 0; } This patch fixes it by resetting the vcpu->mmio_needed once we receive the triple fault to avoid the residue. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 08 Aug, 2017 4 commits
-
-
Longpeng(Mike) authored
This implements the kvm_arch_vcpu_in_kernel() for ARM, and adjusts the calls to kvm_vcpu_on_spin(). Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Longpeng(Mike) authored
This implements kvm_arch_vcpu_in_kernel() for s390. DIAG is a privileged operation, so it cannot be called from problem state (user mode). Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Longpeng(Mike) authored
get_cpl requires vcpu_load, so we must cache the result (whether the vcpu was preempted when its cpl=0) in kvm_vcpu_arch. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Longpeng(Mike) authored
If a vcpu exits due to request a user mode spinlock, then the spinlock-holder may be preempted in user mode or kernel mode. (Note that not all architectures trap spin loops in user mode, only AMD x86 and ARM/ARM64 currently do). But if a vcpu exits in kernel mode, then the holder must be preempted in kernel mode, so we should choose a vcpu in kernel mode as a more likely candidate for the lock holder. This introduces kvm_arch_vcpu_in_kernel() to decide whether the vcpu is in kernel-mode when it's preempted. kvm_vcpu_on_spin's new argument says the same of the spinning VCPU. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 07 Aug, 2017 11 commits
-
-
Radim Krčmář authored
Add guest_cpuid_clear() and use it instead of kvm_find_cpuid_entry(). Also replace some uses of kvm_find_cpuid_entry() with guest_cpuid_has(). Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Radim Krčmář authored
This patch turns guest_cpuid_has_XYZ(cpuid) into guest_cpuid_has(cpuid, X86_FEATURE_XYZ), which gets rid of many very similar helpers. When seeing a X86_FEATURE_*, we can know which cpuid it belongs to, but this information isn't in common code, so we recreate it for KVM. Add some BUILD_BUG_ONs to make sure that it runs nicely. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Radim Krčmář authored
bit(X86_FEATURE_NRIPS) is 3 since 2ccd71f1 ("x86/cpufeature: Move some of the scattered feature bits to x86_capability"), so we can simplify the code. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Bandan Das authored
When L2 uses vmfunc, L0 utilizes the associated vmexit to emulate a switching of the ept pointer by reloading the guest MMU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
Bandan Das authored
Expose VMFUNC in MSRs and VMCS fields. No actual VMFUNCs are enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
Bandan Das authored
Enable VMFUNC in the secondary execution controls. This simplifies the changes necessary to expose it to nested hypervisors. VMFUNCs still cause #UD when invoked. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
David Hildenbrand authored
Let's also just use the underlying functions directly here. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> [Rebased on top of 9f744c59 ("KVM: nVMX: do not pin the VMCS12")] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-
David Hildenbrand authored
nested_get_page() just sounds confusing. All we want is a page from G1. This is even unrelated to nested. Let's introduce kvm_vcpu_gpa_to_page() so we don't get too lengthy lines. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> [Squash pasto fix from Wanpeng Li. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Expose the "Enable INVPCID" secondary execution control to the guest and properly reflect the exit reason. In addition, before this patch the guest was always running with INVPCID enabled, causing pcid.flat's "Test on INVPCID when disabled" test to fail. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Ladi Prosek authored
It has been experimentally confirmed that supporting these two MSRs is one of the necessary conditions for nested Hyper-V to use the TSC page. Modern Windows guests are noticeably slower when they fall back to reading timestamps from the HV_X64_MSR_TIME_REF_COUNT MSR instead of using the TSC page. The newly supported MSRs are advertised with the AccessFrequencyRegs partition privilege flag and CPUID.40000003H:EDX[8] "Support for determining timer frequencies is available" (both outside of the scope of this KVM patch). Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Linus Torvalds authored
-
- 06 Aug, 2017 12 commits
-
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fix from Darren Hart: "Fix loop preventing some platforms from waking up via the power button in s2idle: - intel-vbtn: match power button on press rather than release" * tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: intel-vbtn: match power button on press rather than release
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes and cleanups for v4.13" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix copy paste error in ext4_swap_extents() ext4: fix overflow caused by missing cast in ext4_resize_fs() ext4, project: expand inode extra size if possible ext4: cleanup ext4_expand_extra_isize_ea() ext4: restructure ext4_expand_extra_isize ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize ext4: make xattr inode reads faster ext4: inplace xattr block update fails to deduplicate blocks ext4: remove unused mode parameter ext4: fix warning about stack corruption ext4: fix dir_nlink behaviour ext4: silence array overflow warning ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize ext4: release discard bio after sending discard commands ext4: convert swap_inode_data() over to use swap() on most of the fields ext4: error should be cleared if ea_inode isn't added to the cache ext4: Don't clear SGID when inheriting ACLs ext4: preserve i_mode if __ext4_set_acl() fails ext4: remove unused metadata accounting variables ext4: correct comment references to ext4_ext_direct_IO()
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "This fixes two build issues for ralink platforms, both due to missing #includes which used to be included indirectly via other headers" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: mt7620: Add missing header MIPS: ralink: Fix build error due to missing header
-
Dmitry V. Levin authored
The latest change of compat_sys_sigpending in commit 8f13621a ("sigpending(): move compat to native") has broken it in two ways. First, it tries to write 4 bytes more than userspace expects: sizeof(old_sigset_t) == sizeof(long) == 8 instead of sizeof(compat_old_sigset_t) == sizeof(u32) == 4. Second, on big endian architectures these bytes are being written in the wrong order. This bug was found by strace test suite. Reported-by: Anatoly Pugachev <matorola@gmail.com> Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com> Fixes: 8f13621a ("sigpending(): move compat to native") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Maninder Singh authored
This bug was found by a static code checker tool for copy paste problems. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jerry Lee authored
On a 32-bit platform, the value of n_blcoks_count may be wrong during the file system is resized to size larger than 2^32 blocks. This may caused the superblock being corrupted with zero blocks count. Fixes: 1c6bd717Signed-off-by: Jerry Lee <jerrylee@qnap.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.7+
-
Miao Xie authored
When upgrading from old format, try to set project id to old file first time, it will return EOVERFLOW, but if that file is dirtied(touch etc), changing project id will be allowed, this might be confusing for users, we could try to expand @i_extra_isize here too. Reported-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Miao Xie authored
Clean up some goto statement, make ext4_expand_extra_isize_ea() clearer. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
-
Miao Xie authored
Current ext4_expand_extra_isize just tries to expand extra isize, if someone is holding xattr lock or some check fails, it will give up. So rename its name to ext4_try_to_expand_extra_isize. Besides that, we clean up unnecessary check and move some relative checks into it. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
-
Miao Xie authored
We should avoid the contention between the i_extra_isize update and the inline data insertion, so move the xattr trylock in front of i_extra_isize update. Signed-off-by: Miao Xie <miaoxie@huawei.com> Reviewed-by: Wang Shilong <wshilong@ddn.com>
-
Tahsin Erdogan authored
ext4_xattr_inode_read() currently reads each block sequentially while waiting for io operation to complete before moving on to the next block. This prevents request merging in block layer. Add a ext4_bread_batch() function that starts reads for all blocks then optionally waits for them to complete. A similar logic is used in ext4_find_entry(), so update that code to use the new function. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
When an xattr block has a single reference, block is updated inplace and it is reinserted to the cache. Later, a cache lookup is performed to see whether an existing block has the same contents. This cache lookup will most of the time return the just inserted entry so deduplication is not achieved. Running the following test script will produce two xattr blocks which can be observed in "File ACL: " line of debugfs output: mke2fs -b 1024 -I 128 -F -O extent /dev/sdb 1G mount /dev/sdb /mnt/sdb touch /mnt/sdb/{x,y} setfattr -n user.1 -v aaa /mnt/sdb/x setfattr -n user.2 -v bbb /mnt/sdb/x setfattr -n user.1 -v aaa /mnt/sdb/y setfattr -n user.2 -v bbb /mnt/sdb/y debugfs -R 'stat x' /dev/sdb | cat debugfs -R 'stat y' /dev/sdb | cat This patch defers the reinsertion to the cache so that we can locate other blocks with the same contents. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
-