- 22 Aug, 2020 5 commits
-
-
Tom Parkin authored
The l2tp subsystem doesn't currently make use of tracepoints. As a starting point for adding tracepoints, add skeleton infrastructure for defining tracepoints for the subsystem, and for having them build appropriately whether compiled into the kernel or built as a module. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
The l2tp_* log wrappers only emit messages of a given category if the tunnel or session structure has the appropriate flag set in its debug field. Flags default to being unset. For warning messages, this doesn't make a lot of sense since an administrator is likely to want to know about datapath warnings without needing to tweak the debug flags setting for a given tunnel or session instance. Modify l2tp_warn callsites to use pr_warn_ratelimited instead for unconditional output of warning messages. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
l2tp_ppp in particular had a lot of log messages for tracing [get|set]sockopt calls. These aren't especially useful, so remove these messages. Several log messages flagging error conditions were logged using l2tp_info: they're better off as l2tp_warn. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
l2tp had logging to trace data frame receipt and transmission, including code to dump packet contents. This was originally intended to aid debugging of core l2tp packet handling, but is of limited use now that code is stable. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Aug, 2020 3 commits
-
-
David S. Miller authored
Vinay Kumar Yadav says: ==================== crypto/chelsio: Restructure chelsio's inline crypto drivers This series of patches will move chelsio's inline crypto drivers (ipsec and chtls) from "drivers/crypto/chelsio/" to "drivers/net/ethernet/chelsio/inline_crypto/" for better maintenance. Patch1: moves out chtls. Patch2: moves out inline ipsec, applies on top of Patch1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinay Kumar Yadav authored
This patch seperates inline ipsec functionality from coprocessor driver chcr. Now inline ipsec is separate ULD, moved from "drivers/crypto/chelsio/" to "drivers/net/ethernet/chelsio/inline_crypto/ch_ipsec/" Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinay Kumar Yadav authored
chelsio inline tls driver(chtls) is mostly overlaps with NIC drivers but currenty it is part of crypto driver, so move it out to appropriate directory for better maintenance. Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Aug, 2020 13 commits
-
-
Vishal Kulkarni authored
Set IP protocol mask only when IP protocol field is set. This will allow flow-type ether with vlan rule which don't have protocol field to apply. ethtool -N ens5f4 flow-type ether proto 0x8100 vlan 0x600\ m 0x1FFF action 3 loc 16 Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Dewar authored
In st21nfca_connectivity_event_received(), the return value of devm_kzalloc() is unnecessarily cast from void*. Remove cast. Issue identified with Coccinelle. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Dewar authored
In st_nci_hci_connectivity_event_received(), the return value of devm_kzalloc() is unnecessarily cast from void*. Remove cast. Issue identified with Coccinelle. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Dewar authored
In qed_rdma_destroy_cq() the result of dma_alloc_coherent() is cast from void* unnecessarily. Remove cast. Issue identified with Coccinelle. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== tcp_mmap: optmizations This series updates tcp_mmap reference tool to use best pratices. First patch is using madvise(MADV_DONTNEED) to decrease pressure on the socket lock. Last patches try to use huge pages when available. ==================== Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Arjun Roy <arjunroy@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
One down side of using TCP rx zerocopy is one extra TLB miss per page after the mapping operation. While if the application is using hugepages, the non zerocopy recvmsg() will not have to pay these TLB costs. This patch allows server side to use huge pages for the non zero copy case, to allow fair comparisons when both solutions use optimal conditions. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
There are significant gains using huge pages when available, as shown in [1]. This patch adds mmap_large_buffer() and uses it in client side (tx path of this reference tool) Following patch will use the feature for server side. [1] https://patchwork.ozlabs.org/project/netdev/patch/20200820154359.1806305-1-edumazet@google.com/Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When TCP_ZEROCOPY_RECEIVE operation has been added, I made the mistake of automatically un-mapping prior content before mapping new pages. This has the unfortunate effect of adding potentially long MMU operations (like TLB flushes) while socket lock is held. Using madvise(MADV_DONTNEED) right after pages has been used has two benefits : 1) This releases pages sooner, allowing pages to be recycled if they were part of a page pool in a NIC driver. 2) No more long unmap operations while preventing immediate processing of incoming packets. The cost of the added system call is small enough. Arjun will submit a kernel patch allowing to opt out from the unmap attempt in tcp_zerocopy_receive() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Currently, tcp sendmsg(MSG_ZEROCOPY) is building skbs with order-0 fragments. Compared to standard sendmsg(), these skbs usually contain up to 16 fragments on arches with 4KB page sizes, instead of two. This adds considerable costs on various ndo_start_xmit() handlers, especially when IOMMU is in the picture. As high performance applications are often using huge pages, we can try to combine adjacent pages belonging to same compound page. Tested on AMD Rome platform, with IOMMU, nominal single TCP flow speed is roughly doubled (~55Gbit -> ~100Gbit), when user application is using hugepages. For reference, nominal single TCP flow speed on this platform without MSG_ZEROCOPY is ~65Gbit. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Simon Horman says: ==================== nfp: flower: add support for QinQ matching Louis says: Add new feature to the Netronome flower driver to enable QinQ offload. This needed a bit of gymnastics in order to not break compatibility with older firmware as the flow key sent to the firmware had to be updated in order to make space for the extra field. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
When both the driver and the firmware supports QinQ the flow key structure that is send to the firmware is updated as the old method of matching on VLAN did not allow for space to add another VLAN tag. VLAN flows can now also match on the tpid field, not constrained to just 0x8100 as before. Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
Add a check to make sure the total length of the flow key sent to the firmware stays within the supported limit. Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Kundu authored
IPv6 filters can occupy up to 4 slots and will exhaust HPFILTER region much sooner. So, continue searching for free slots in the HASH or NORMAL filter regions, as long as the rule's priority does not conflict with existing rules in those regions. Signed-off-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Aug, 2020 19 commits
-
-
David S. Miller authored
Kurt Kanzenbach says: ==================== ptp: Add generic helper functions in order to reduce code duplication (and cut'n'paste errors) in the ptp code of DSA, Ethernet and Phy drivers, create helper functions and move them to ptp_classify. This way all drivers can share the same implementation. This is version four and contains bugfixes. Implemented as discussed [1] [2] [3] [4]. Previous versions can be found here: * https://lkml.kernel.org/netdev/20200723074946.14253-1-kurt@linutronix.de/ * https://lkml.kernel.org/netdev/20200727090601.6500-1-kurt@linutronix.de/ * https://lkml.kernel.org/netdev/20200730080048.32553-1-kurt@linutronix.de/ Thanks, Kurt Changes sinve v3: * Coding style issues (Richard Cochran, Petr Machata) * Add better documentation (Grygorii Strashko) * Fix cpts code (Grygorii Strashko) * Use ntohs() for TI code (Grygorii Strashko) * Add tags Changes since v2: * Make ptp_parse_header() work in all scenarios (Russell King) * Fix msgtype offset for ptp v1 packets Changes since v1: * Fix Kconfig (Richard Cochran) * Include more drivers (Richard Cochran) [1] - https://lkml.kernel.org/netdev/20200713140112.GB27934@hoboy/ [2] - https://lkml.kernel.org/netdev/20200720142146.GB16001@hoboy/ [3] - https://lkml.kernel.org/netdev/20200723074946.14253-1-kurt@linutronix.de/ [4] - https://lkml.kernel.org/netdev/20200729100257.GX1551@shell.armlinux.org.uk/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
The offset for the control field is not needed anymore. Remove it. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-and-tested-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
The message type is located at different offsets within the ptp header depending on the ptp version (v1 or v2). Therefore, drivers which also deal with ptp v1 have some code for it. Extract this into a helper function for drivers to be used. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
Reason: A lot of the ptp drivers - which implement hardware time stamping - need specific fields such as the sequence id from the ptp v2 header. Currently all drivers implement that themselves. Introduce a generic function to retrieve a pointer to the start of the ptp v2 header. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cristobal Forno authored
Currently the driver reads RX and TX subCRQ handle array directly from a DMA-mapped buffer address when it needs to make a H_SEND_SUBCRQ hcall. This patch stores that information in the ibmvnic_sub_crq_queue structure instead of reading from the buffer received at login. The overall goal of this patch is to parse relevant information from the login response buffer and store it in the driver's private data structures so that we don't need to read directly from the buffer and can then free up that memory. Signed-off-by: Cristobal Forno <cforno12@linux.ibm.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: use napi_complete_done return value Consider the return value of napi_complete_done(), this allows users to use the gro_flush_timeout sysfs attribute as an alternative to classic interrupt coalescing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
After making use of the gro_flush_timeout attribute I once got a tx timeout due to an interrupt that wasn't handled. Seems using irq_enabled can be racy, and it's not needed any longer anyway, so remove it. I've never seen a report about such a race before, therefore treat the change as an improvement. There's just one small drawback: If a legacy PCI interrupt is used, and if this interrupt is shared with a device with high interrupt rate, then we may handle interrupts even if NAPI disabled them, and we may see a certain performance decrease under high network load. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Consider the return value of napi_complete_done(), this allows users to use the gro_flush_timeout sysfs attribute as an alternative to classic interrupt coalescing. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Chapman authored
Kernel documentation of L2TP has not been kept up to date and lacks coverage of some L2TP APIs. While addressing this, refactor to improve readability, separating the parts which focus on user APIs and internal implementation into sections. Changes in v2: - fix checkpatch warnings about trailing whitespace and long lines Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
We've been warning about SO_BSDCOMPAT usage for many years. We may remove this code completely now. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: loop: Expose VLAN table through devlink Changes in v2: - set the DSA configure_vlan_while_not_filtering boolean - return the actual occupancy ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We return the VLAN table size through devlink as a simple parameter, we do not support altering it at runtime: devlink resource show mdio_bus/fixed-0:1f mdio_bus/fixed-0:1f: name VTU size 4096 occ 0 unit entry dpipe_tables none and after configure a bridge with VLAN filtering: devlink resource show mdio_bus/fixed-0:1f mdio_bus/fixed-0:1f: name VTU size 4096 occ 1 unit entry dpipe_tables none Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Since this is a mock-up driver with no real data path for now, but we will have one at some point, enable VLANs while not filtering. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-