- 23 Jun, 2011 7 commits
-
-
Nishanth Aravamudan authored
On 16.06.2011 [08:28:39 -0500], Brian King wrote: > On 06/16/2011 02:51 AM, Tejun Heo wrote: > > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote: > >>> That looks like the right thing to do. For ipr's usage of > >>> libata, we don't have the concept of a port frozen state, so this flag > >>> should really never get set. The alternate way to fix this would be to > >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler > >>> is not NULL. > >> > >> It seemed like ipr is as you say, but I wasn't sure if it was > >> appropriate to make the change above in the common libata-scis code or > >> not. I don't want to break some other device on accident. > >> > >> Also, I tried your suggestion, but I don't think that can happen in > >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like > >> ap->ops typically gets set only after ata_port_alloc returns? > > > > Maybe we can test error_handler in ata_sas_port_start()? > > Good point. Since libsas is converted to the new eh now, we would need to have > this test. Commit 7b3a24c5 ("ahci: don't enable port irq before handler is registered") caused a regression for CD-ROMs attached to the IPR SATA bus on Power machines: ata_port_alloc: ENTER ata_port_probe: ata1: bus probe begin ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: limiting speed to UDMA7:PIO5 ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: disabled ata_port_probe: ata1: bus probe end scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured The FROZEN flag added in that commit is only cleared by the new EH code, which is not used by ipr. Clear this flag in the SAS code if we don't support new EH. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Tejun Heo authored
regardless of firmware revision It's unlikely NOSETXFER works for a revision of drive but doesn't for another and pioneer doesn't seem to be fixing firmwares for the affected drives. Apply NOSETXFER to the affected pioneer drives regardless of firmware revision. http://article.gmane.org/gmane.linux.ide/49734Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fl-00@gmx.de Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Justin P. Mattock authored
The patch below fixes a typo. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: jfs: agstart field must be 64 bits JFS: Don't save agno in the inode jfs: Update agstart when resizing volume jfs: old_agsize should be 64 bits in jfs_extendfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PCI / PM: Block races between runtime PM and system sleep PM / Domains: Update documentation PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset PM: Fix async resume following suspend failure PM: Free memory bitmaps if opening /dev/snapshot fails PM: Rename dev_pm_info.in_suspend to is_prepared PM: Update documentation regarding sysdevs PM / Runtime: Update doc: usage count no longer incremented across system PM
-
David Rientjes authored
Commit 959ecc48 ("mm/memory_hotplug.c: fix building of node hotplug zonelist") does not protect the build_all_zonelists() call with zonelists_mutex as needed. This can lead to races in constructing zonelist ordering if a concurrent build is underway. Protecting this with lock_memory_hotplug() is insufficient since zonelists can be rebuild though sysfs as well. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
The error handling in mem_online_node() is incorrect: hotadd_new_pgdat() returns NULL if the new pgdat could not have been allocated and a pointer to it otherwise. mem_online_node() should fail if hotadd_new_pgdat() fails, not the inverse. This fixes an issue when memoryless nodes are not onlined and their sysfs interface is not registered when their first cpu is brought up. The bug was introduced by commit cf23422b ("cpu/mem hotplug: enable CPUs online before local memory online") iow v2.6.35. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Jun, 2011 3 commits
-
-
David Howells authored
Fix error handling in construct_key_and_link(). If construct_alloc_key() returns an error, it shouldn't pass out through the normal path as the key_serial() called by the kleave() statement will oops when it gets an error code in the pointer: BUG: unable to handle kernel paging request at ffffffffffffff84 IP: [<ffffffff8120b401>] request_key_and_link+0x4d7/0x52f .. Call Trace: [<ffffffff8120b52c>] request_key+0x41/0x75 [<ffffffffa00ed6e8>] cifs_get_spnego_key+0x206/0x226 [cifs] [<ffffffffa00eb0c9>] CIFS_SessSetup+0x511/0x1234 [cifs] [<ffffffffa00d9799>] cifs_setup_session+0x90/0x1ae [cifs] [<ffffffffa00d9c02>] cifs_get_smb_ses+0x34b/0x40f [cifs] [<ffffffffa00d9e05>] cifs_mount+0x13f/0x504 [cifs] [<ffffffffa00caabb>] cifs_do_mount+0xc4/0x672 [cifs] [<ffffffff8113ae8c>] mount_fs+0x69/0x155 [<ffffffff8114ff0e>] vfs_kern_mount+0x63/0xa0 [<ffffffff81150be2>] do_kern_mount+0x4d/0xdf [<ffffffff81152278>] do_mount+0x63c/0x69f [<ffffffff8115255c>] sys_mount+0x88/0xc2 [<ffffffff814fbdc2>] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
MN10300's asm/uaccess.h needs to #include linux/kernel.h to get might_sleep() otherwise it fails to build on MN10300 allyesconfig. This fails in a few places with messages like the following: In file included from security/keys/trusted.c:14: include/linux/uaccess.h: In function '__copy_from_user_nocache': include/linux/uaccess.h:52: error: implicit declaration of function 'might_sleep' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix decode_secinfo_maxsz NFSv4.1: Fix an off-by-one error in pnfs_generic_pg_test NFSv4.1: Fix some issues with pnfs_generic_pg_test NFSv4.1: file layout must consider pg_bsize for coalescing pnfs-obj: No longer needed to take an extra ref at add_device SUNRPC: Ensure the RPC client only quits on fatal signals NFSv4: Fix a readdir regression nfs4.1: mark layout as bad on error path in _pnfs_return_layout nfs4.1: prevent race that allowed use of freed layout in _pnfs_return_layout NFSv4.1: need to put_layout_hdr on _pnfs_return_layout error path NFS: (d)printks should use %zd for ssize_t arguments NFSv4.1: fix break condition in pnfs_find_lseg nfs4.1: fix several problems with _pnfs_return_layout NFSv4.1: allow zero fh array in filelayout decode layout NFSv4.1: allow nfs_fhget to succeed with mounted on fileid NFSv4.1: Fix a refcounting issue in the pNFS device id cache NFSv4.1: deprecate headerpadsz in CREATE_SESSION NFS41: do not update isize if inode needs layoutcommit NLM: Don't hang forever on NLM unlock requests NFS: fix umount of pnfs filesystems
-
- 21 Jun, 2011 20 commits
-
-
Rafael J. Wysocki authored
After commit e8665002 (PM: Allow pm_runtime_suspend() to succeed during system suspend) it is possible that a device resumed by the pm_runtime_resume(dev) in pci_pm_prepare() will be suspended immediately from a work item, timer function or otherwise, defeating the very purpose of calling pm_runtime_resume(dev) from there. To prevent that from happening it is necessary to increment the runtime PM usage counter of the device by replacing pm_runtime_resume() with pm_runtime_get_sync(). Moreover, the incremented runtime PM usage counter has to be decremented by the corresponding pci_pm_complete(), via pm_runtime_put_sync(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Commit 4d27e9dc (PM: Make power domain callbacks take precedence over subsystem ones) forgot to update the device power management documentation to take changes made by it into account. Correct that mistake. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Commit 85eb8c8d (PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)) converted the shmobile platform to using generic code for runtime PM clock management, but it changed the behavior for CONFIG_PM_RUNTIME unset incorrectly. Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify() should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER (instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE, respectively). Make this function behave as appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
-
Alan Stern authored
The PM core doesn't handle suspend failures correctly when it comes to asynchronously suspended devices. These devices are moved onto the dpm_suspended_list as soon as the corresponding async thread is started up, and they remain on the list even if they fail to suspend or the sleep transition is cancelled before they get suspended. As a result, when the PM core unwinds the transition, it tries to resume the devices even though they were never suspended. This patch (as1474) fixes the problem by adding a new "is_suspended" flag to dev_pm_info. Devices are resumed only if the flag is set. [rjw: * Moved the dev->power.is_suspended check into device_resume(), because we need to complete dev->power.completion and clear dev->power.is_prepared too for devices whose dev->power.is_suspended flags are unset. * Fixed __device_suspend() to avoid setting dev->power.is_suspended if async_error is different from zero.] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
Michal Kubecek authored
When opening /dev/snapshot device, snapshot_open() creates memory bitmaps which are freed in snapshot_release(). But if any of the callbacks called by pm_notifier_call_chain() returns NOTIFY_BAD, open() fails, snapshot_release() is never called and bitmaps are not freed. Next attempt to open /dev/snapshot then triggers BUG_ON() check in create_basic_memory_bitmaps(). This happens e.g. when vmwatchdog module is active on s390x. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
Alan Stern authored
This patch (as1473) renames the "in_suspend" field in struct dev_pm_info to "is_prepared", in preparation for an upcoming change. The new name is more descriptive of what the field really means. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
Rafael J. Wysocki authored
The part of Documentation/power/devices.txt regarding sysdevs is not valid any more after commit 2e711c04 (PM: Remove sysdev suspend, resume and shutdown operations), so remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Kevin Hilman authored
Commit e8665002 (PM: Allow pm_runtime_suspend() to succeed during system suspend) removed usage count increment across system PM. Update doc to reflect this. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Ensure that LOS and DFE are being turned off RDMA/cxgb4: Couple of abort fixes RDMA/cxgb4: Don't truncate MR lengths RDMA/cxgb4: Don't exceed hw IQ depth limit for user CQs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: Fix oops in jbd2_journal_remove_journal_head() jbd2: Remove obsolete parameters in the comments for some jbd2 functions ext4: fixed tracepoints cleanup ext4: use FIEMAP_EXTENT_LAST flag for last extent in fiemap ext4: Fix max file size and logical block counting of extent format file ext4: correct comments for ext4_free_blocks()
-
Bryan Schumaker authored
I initially did the calculation in bytes, and not words Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
And document what is going on there... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
1. If the intention is to coalesce requests 'prev' and 'req' then we have to ensure at least that we have a layout starting at req_offset(prev). 2. If we're only requesting a minimal layout of length desc->pg_count, we need to test the length actually returned by the server before we allow the coalescing to occur. 3. We need to deal correctly with (pgio->lseg == NULL) 4. Fixup the test guarding the pnfs_update_layout. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit 13e12d14 ("vfs: reorganize 'struct inode' layout a bit") moved things around a bit changed i_state to be unsigned int instead of unsigned long. That was to help structure layout for the 64-bit case, and shrink 'struct inode' a bit (admittedly that only happened when spinlock debugging was on and i_flags didn't pack with i_lock). However, Meelis Roos reports that this results in unaligned exceptions on sprc, and it turns out that the bit-locking primitives that we use for the I_NEW bit want to use the bitops. Which want 'unsigned long', not 'unsigned int'. We really should fix the bit locking code to not have that kind of requirement, but that's a much bigger change. So for now, revert that field back to 'unsigned long' (but keep the other re-ordering changes from the commit that caused this). Andi points out that we have played games with this in 'struct page', so it's solvable with other hacks too, but since right now the struct inode size advantage only happens with some rare config options, it's not worth fighting. It _would_ be worth fixing the bitlocking code, though. Especially since there is no type safety in the bitlocking code (this never caused any warnings, and worked fine on x86-64, because the bitlocks take a 'void *' and x86-64 doesn't care that deeply about alignment). So it's currently a very easy problem to trigger by mistake and never notice. Reported-by: Meelis Roos <mroos@linux.ee> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms/r6xx+: voltage fixes drm/nouveau: drop leftover debugging drm/radeon: avoid warnings from r600/eg irq handlers on powered off card. drm/radeon/kms: add missing param for dce3.2 DP transmitter setup drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync drm/nv50/disp: fix gamma with page flipping overlay turned on drm/nouveau/pm: Prevent overflow in nouveau_perf_init() drm/nouveau: fix big-endian switch
-
git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds authored
* 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: Fix DGT rate on 8960 and 8660 msm: timer: compensate for timer shift in msm_read_timer_count msm: timer: Fix SMP build error
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: nfsd4: fix break_lease flags on nfsd open nfsd: link returns nfserr_delay when breaking lease nfsd: v4 support requires CRYPTO nfsd: fix dependency of nfsd on auth_rpcgss
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) pxa168_eth: fix race in transmit path. ipv4, ping: Remove duplicate icmp.h include netxen: fix race in skb->len access sgi-xp: fix a use after free hp100: fix an skb->len race netpoll: copy dev name of slaves to struct netpoll ipv4: fix multicast losses r8169: fix static initializers. inet_diag: fix inet_diag_bc_audit() gigaset: call module_put before restart of if_open() farsync: add module_put to error path in fst_open() net: rfs: enable RFS before first data packet is received fs_enet: fix freescale FCC ethernet dp buffer alignment netdev: bfin_mac: fix memory leak when freeing dma descriptors vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support caif: Bugfix - XOFF removed channel from caif-mux tun: teach the tun/tap driver to support netpoll dp83640: drop PHY status frames in the driver. dp83640: fix phy status frame event parsing phylib: Allow BCM63XX PHY to be selected only on BCM63XX. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: devcgroup_inode_permission: take "is it a device node" checks to inlined wrapper fix comment in generic_permission() kill obsolete comment for follow_down() proc_sys_permission() is OK in RCU mode reiserfs_permission() doesn't need to bail out in RCU mode proc_fd_permission() is doesn't need to bail out in RCU mode nilfs2_permission() doesn't need to bail out in RCU mode logfs doesn't need ->permission() at all coda_ioctl_permission() is safe in RCU mode cifs_permission() doesn't need to bail out in RCU mode bad_inode_permission() is safe from RCU mode ubifs: dereferencing an ERR_PTR in ubifs_mount()
-
- 20 Jun, 2011 10 commits
-
-
Alex Deucher authored
0xff01 is not an actual voltage value, but a flag for the driver. If the power state as that value, skip setting the voltage. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Stephen Boyd authored
The DGT runs at 27 MHz divided by 4 on 8660 and 8960. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
-
Dave Kleikamp authored
The previous patch added the agstart field to jfs_ip, but declared it a long. We need to make sure its 64 bits on every platform. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
-
Richard Cochran authored
Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Cc: stable@kernel.org Cc: Sachin Sanap <ssanap@marvell.com> Cc: Zhangfei Gao <zgao6@marvell.com> Cc: Philip Rakity <prakity@marvell.com> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benny Halevy authored
Otherwise we end up overflowing the rpc buffer size on the receive end. Signed-off-by: Benny Halevy <benny@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jesper Juhl authored
Remove the duplicate inclusion of net/icmp.h from net/ipv4/ping.c Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
As soon as skb is given to hardware, TX completion can free skb under us. Therefore, we should update dev stats before kicking the device. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/setup: Fix for incorrect xen_extra_mem_start. xen: When calling power_off, don't call the halt function. xen: Fix compile warning when CONFIG_SMP is not defined. xen: support CONFIG_MAXSMP xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sh_keysc - 8x8 MODE_6 fix Input: omap-keypad - add missing input_sync() Input: evdev - try to wake up readers only if we have full packet Input: properly assign return value of clamp() macro.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: avoid delayed metadata items during commits btrfs: fix uninitialized return value btrfs: fix wrong reservation when doing delayed inode operations btrfs: Remove unused sysfs code btrfs: fix dereference of ERR_PTR value Btrfs: fix relocation races Btrfs: set no_trans_join after trying to expand the transaction Btrfs: protect the pending_snapshots list with trans_lock Btrfs: fix path leakage on subvol deletion Btrfs: drop the delalloc_bytes check in shrink_delalloc Btrfs: check the return value from set_anon_super
-