- 26 Apr, 2024 1 commit
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Fixes: 0880bb3b ("crypto: tegra - Add Tegra Security Engine driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Akhil R <akhilrajeev@nvidia.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 19 Apr, 2024 15 commits
-
-
Eric Biggers authored
x86_64 has the "interesting" property that the instruction size is generally a bit shorter for instructions that operate on the 32-bit (or less) part of registers, or registers that are in the original set of 8. This patch adjusts the AES-XTS code to take advantage of that property by changing the LEN parameter from size_t to unsigned int (which is all that's needed and is what the non-AVX implementation uses) and using the %eax register for KEYLEN. This decreases the size of aes-xts-avx-x86_64.o by 1.2%. Note that changing the kmovq to kmovd was going to be needed anyway to make the AVX10/256 code really work on CPUs that don't support 512-bit vectors (since the AVX10 spec says that 64-bit opmask instructions will only be supported on processors that support 512-bit vectors). Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
- For conditionally subtracting 16 from LEN when decrypting a message whose length isn't a multiple of 16, use the cmovnz instruction. - Fold the addition of 4*VL to LEN into the sub of VL or 16 from LEN. - Remove an unnecessary test instruction. This results in slightly shorter code, both source and binary. Signed-off-by:
-
Eric Biggers authored
Decrease the amount of code specific to the different AES variants by "right-aligning" the sequence of round keys, and for AES-128 and AES-192 just skipping irrelevant rounds at the beginning. This shrinks the size of aes-xts-avx-x86_64.o by 13.3%, and it improves the efficiency of AES-128 and AES-192. The tradeoff is that for AES-256 some additional not-taken conditional jumps are now executed. But these are predicted well and are cheap on x86. Note that the ARMv8 CE based AES-XTS implementation uses a similar strategy to handle the different AES variants. Signed-off-by:
-
Eric Biggers authored
Since aesni_xts_enc() and aesni_xts_dec() are very similar, generate them from a macro that's passed an argument enc=1 or enc=0. This reduces the length of aesni-intel_asm.S by 112 lines while still producing the exact same object file in both 32-bit and 64-bit mode. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Eric Biggers authored
When encrypting a message whose length isn't a multiple of 16 bytes, encrypt the last full block in the main loop. This works because only decryption uses the last two tweaks in reverse order, not encryption. This improves the performance of decrypting messages whose length isn't a multiple of the AES block length, shrinks the size of aes-xts-avx-x86_64.o by 5.0%, and eliminates two instructions (a test and a not-taken conditional jump) when encrypting a message whose length *is* a multiple of the AES block length. While it's not super useful to optimize for ciphertext stealing given that it's rarely needed in practice, the other two benefits mentioned above make this optimization worthwhile. Signed-off-by:
-
Maxime Méré authored
Due to a lack of alignment in the data sent by requests, the actual DMA support of the STM32 hash driver is only working with digest calls. This patch, based on the algorithm used in the driver omap-sham.c, allows for the usage of DMA in any situation. It has been functionally tested on STM32MP15, STM32MP13 and STM32MP25. By checking the performance of this new driver with OpenSSL, the following results were found: Performance: (datasize: 4096, number of hashes performed in 10s) |type |no DMA |DMA support|software | |-------|----------|-----------|----------| |md5 |13873.56k |10958.03k |71163.08k | |sha1 |13796.15k |10729.47k |39670.58k | |sha224 |13737.98k |10775.76k |22094.64k | |sha256 |13655.65k |10872.01k |22075.39k | CPU Usage: (algorithm used: sha256, computation time: 20s, measurement taken at ~10s) |datasize |no DMA |DMA | software | |----------|-------|-----|----------| | 2048 | 56% | 49% | 50% | | 4096 | 54% | 46% | 50% | | 8192 | 53% | 40% | 50% | | 16384 | 53% | 33% | 50% | Note: this update doesn't change the driver performance without DMA. As shown, performance with DMA is slightly lower than without, but in most cases, it will save CPU time. Signed-off-by:
Maxime Méré <maxime.mere@foss.st.com> Signed-off-by:
-
Adam Guerin authored
Improve error logging in rate limiting feature. Staying consistent with the error logging found in the telemetry feature. Fixes: d9fb8408 ("crypto: qat - add rate limiting feature to qat_4xxx") Signed-off-by:
Adam Guerin <adam.guerin@intel.com> Reviewed-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
-
Adam Guerin authored
Improve error message to be more readable. Fixes: 5da6a2d5 ("crypto: qat - generate dynamically arbiter mappings") Signed-off-by:
-
Eric Biggers authored
Instead of loading the message words into both MSG and \m0 and then adding the round constants to MSG, load the message words into \m0 and the round constants into MSG and then add \m0 to MSG. This shortens the source code slightly. It changes the instructions slightly, but it doesn't affect binary code size and doesn't seem to affect performance. Suggested-by:
Stefan Kanthak <stefan.kanthak@nexgo.de> Signed-off-by:
-
Eric Biggers authored
- Load the SHA-256 round constants relative to a pointer that points into the middle of the constants rather than to the beginning. Since x86 instructions use signed offsets, this decreases the instruction length required to access some of the later round constants. - Use punpcklqdq or punpckhqdq instead of longer instructions such as pshufd, pblendw, and palignr. This doesn't harm performance. The end result is that sha256_ni_transform shrinks from 839 bytes to 791 bytes, with no loss in performance. Suggested-by:
-
Eric Biggers authored
MSGTMP[0-3] are used to hold the message schedule and are not temporary registers per se. MSGTMP4 is used as a temporary register for several different purposes and isn't really related to MSGTMP[0-3]. Rename them to MSG[0-3] and TMP accordingly. Also add a comment that clarifies what MSG is. Suggested-by:
-
Eric Biggers authored
To avoid source code duplication, do the SHA-256 rounds using macros. This reduces the length of sha256_ni_asm.S by 153 lines while still producing the exact same object file. Signed-off-by:
-
Damian Muszynski authored
The Intel QAT driver provides support for the Diffie-Hellman (DH) algorithm, limited to prime numbers up to 4K. This driver is used by default on platforms with integrated QAT hardware for all DH requests. This has led to failures with algorithms requiring larger prime sizes, such as ffdhe6144. alg: ffdhe6144(dh): test failed on vector 1, err=-22 alg: self-tests for ffdhe6144(qat-dh) (ffdhe6144(dh)) failed (rc=-22) Implement a fallback mechanism when an unsupported request is received. Signed-off-by:
Damian Muszynski <damian.muszynski@intel.com> Reviewed-by:
-
Eric Biggers authored
Access the AES round keys using offsets -7*16 through 7*16, instead of 0*16 through 14*16. This allows VEX-encoded instructions to address all round keys using 1-byte offsets, whereas before some needed 4-byte offsets. This decreases the code size of aes-xts-avx-x86_64.o by 4.2%. Signed-off-by:
-
Chen Ni authored
Add check for dma_map_single() and return error if it fails in order to avoid invalid dma address. Fixes: e9297111 ("crypto: octeontx2 - add ctx_val workaround") Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Reviewed-by:
Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by:
-
- 12 Apr, 2024 24 commits
-
-
Eric Biggers authored
Make the non-AVX implementation of AES-XTS (xts-aes-aesni) use the new glue code that was introduced for the AVX implementations of AES-XTS. This reduces code size, and it improves the performance of xts-aes-aesni due to the optimization for messages that don't span page boundaries. This required moving the new glue functions higher up in the file and allowing the IV encryption function to be specified by the caller. Signed-off-by:
-
Lukas Wunner authored
Add a DEFINE_FREE() clause for x509_certificate structs and use it in x509_cert_parse() and x509_key_preparse(). These are the only functions where scope-based x509_certificate allocation currently makes sense. A third user will be introduced with the forthcoming SPDM library (Security Protocol and Data Model) for PCI device authentication. Unlike most other DEFINE_FREE() clauses, this one checks for IS_ERR() instead of NULL before calling x509_free_certificate() at end of scope. That's because the "constructor" of x509_certificate structs, x509_cert_parse(), returns a valid pointer or an ERR_PTR(), but never NULL. Comparing the Assembler output before/after has shown they are identical, save for the fact that gcc-12 always generates two return paths when __cleanup() is used, one for the success case and one for the error case. In x509_cert_parse(), add a hint for the compiler that kzalloc() never returns an ERR_PTR(). Otherwise the compiler adds a gratuitous IS_ERR() check on return. Introduce an assume() macro for this which can be re-used elsewhere in the kernel to provide hints for the compiler. Suggested-by:
Jonathan Cameron <Jonathan.Cameron@Huawei.com> Link: https://lore.kernel.org/all/20231003153937.000034ca@Huawei.com/ Link: https://lwn.net/Articles/934679/Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Chenghai Huang authored
When the qm uninit command is executed, the err data needs to be released to prevent memory leakage. The error information release operation and uacce_remove are integrated in qm_remove_uacce. So add the qm_remove_uacce to qm uninit to avoid err memory leakage. Signed-off-by:
Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by:
-
Chenghai Huang authored
When dumping SQ, only the corresponding ID's SQE needs to be dumped, and there is no need to apply for the entire SQE memory. This is because excessive dump operations can lead to memory resource waste. Therefor apply for the space corresponding to sqe_id separately to avoid space waste. Signed-off-by:
-
Chenghai Huang authored
The AIV is one of the SEC resources. When releasing resources, it need to release the AIV resources at the same time. Otherwise, memory leakage occurs. The aiv resource release is added to the sec resource release function. Signed-off-by:
-
Chenghai Huang authored
There is a scenario where the file directory is created but the file memory is not set. In this case, if a user accesses the file, an error occurs. So during the creation process of debugfs, memory should be allocated first before creating the directory. In the release process, the directory should be deleted first before releasing the memory to avoid the situation where the memory does not exist when accessing the directory. In addition, the directory released by the debugfs is a global variable. When the debugfs of an accelerator fails to be initialized, releasing the directory of the global variable affects the debugfs initialization of other accelerators. The debugfs root directory released by debugfs init should be a member of qm, not a global variable. Signed-off-by:
-
Chenghai Huang authored
The cmd type can be extended. Currently, only four types of cmd can be processed. Therefor, add the default processing branch to intercept incorrect parameter input. Signed-off-by:
-
Chenghai Huang authored
There is a scenario where the file directory is created but the file attribute is not set. In this case, if a user accesses the file, an error occurs. So adjust the processing logic in the debugfs creation to prevent the file from being accessed before the file attributes such as the index are set. Signed-off-by:
-
Chenghai Huang authored
The input parameter check in acc_get_sgl is redundant. The caller has been verified once. When the check is performed for multiple times, the performance deteriorates. So the redundant parameter verification is deleted, and the index verification is changed to the module entry function for verification. Signed-off-by:
-
Chenghai Huang authored
During the zip probe process, the debugfs failure does not stop the probe. When debugfs initialization fails, jumping to the error branch will also release regs, in addition to its own rollback operation. As a result, it may be released repeatedly during the regs uninit process. Therefore, the null check needs to be added to the regs uninit process. Signed-off-by:
-
Chenghai Huang authored
When CONFIG_PCI_IOV is disabled, the SRIOV configuration function is not required. An error occurs if this function is incorrectly called. Consistent with other modules, add the condition for configuring the sriov function of sec_pci_driver. Signed-off-by:
-
Eric Biggers authored
Since sha512_transform_rorx() uses ymm registers, execute vzeroupper before returning from it. This is necessary to avoid reducing the performance of SSE code. Fixes: e01d69cb ("crypto: sha512 - Optimized SHA512 x86_64 assembly routine using AVX instructions.") Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Eric Biggers authored
Since sha256_transform_rorx() uses ymm registers, execute vzeroupper before returning from it. This is necessary to avoid reducing the performance of SSE code. Fixes: d34a4600 ("crypto: sha256 - Optimized sha256 x86_64 routine using AVX2's RORX instructions") Signed-off-by:
-
Eric Biggers authored
Since nh_avx2() uses ymm registers, execute vzeroupper before returning from it. This is necessary to avoid reducing the performance of SSE code. Fixes: 0f961f9f ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305") Signed-off-by:
-
Tom Zanussi authored
If some cpus are offlined, or if the node mask is smaller than expected, the 'nonexistent cpu' warning in rebalance_wq_table() may be erroneously triggered. Use cpumask_weight() to make sure we only iterate over the exact number of cpus in the mask. Also use num_possible_cpus() instead of num_online_cpus() to make sure all slots in the wq table are initialized. Signed-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
-
Stefan Berger authored
Enable the x509 parser to accept NIST P521 certificates and add the OID for ansip521r1, which is the identifier for NIST P521. Cc: David Howells <dhowells@redhat.com> Tested-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
Stefan Berger <stefanb@linux.ibm.com> Signed-off-by:
-
Stefan Berger authored
Adjust the calculation of the maximum signature size for support of NIST P521. While existing curves may prepend a 0 byte to their coordinates (to make the number positive), NIST P521 will not do this since only the first bit in the most significant byte is used. If the encoding of the x & y coordinates requires at least 128 bytes then an additional byte is needed for the encoding of the length. Take this into account when calculating the maximum signature size. Reviewed-by:
-
Stefan Berger authored
Register NIST P521 as an akcipher and extend the testmgr with NIST P521-specific test vectors. Add a module alias so the module gets automatically loaded by the crypto subsystem when the curve is needed. Tested-by:
-
Stefan Berger authored
In cases where 'keylen' was referring to the size of the buffer used by a curve's digits, it does not reflect the purpose of the variable anymore once NIST P521 is used. What it refers to then is the size of the buffer, which may be a few bytes larger than the size a coordinate of a key. Therefore, rename keylen to bufsize where appropriate. Tested-by:
-
Stefan Berger authored
Replace the usage of ndigits with nbits where precise space calculations are needed, such as in ecdsa_max_size where the length of a coordinate is determined. Tested-by:
-
Stefan Berger authored
Add the parameters for the NIST P521 curve and define a new curve ID for it. Make the curve available in ecc_get_curve. Tested-by:
-
Stefan Berger authored
In ecc_point_mult use the number of bits of the NIST P521 curve + 2. The change is required specifically for NIST P521 to pass mathematical tests on the public key. Tested-by:
-
Stefan Berger authored
Implement vli_mmod_fast_521 following the description for how to calculate the modulus for NIST P521 in the NIST publication "Recommendations for Discrete Logarithm-Based Cryptography: Elliptic Curve Domain Parameters" section G.1.4. NIST p521 requires 9 64bit digits, so increase the ECC_MAX_DIGITS so that the vli digit array provides enough elements to fit the larger integers required by this curve. Tested-by:
-
Stefan Berger authored
Add the number of bits a curve has to the ecc_curve definition to be able to derive the number of bytes a curve requires for its coordinates from it. It also allows one to identify a curve by its particular size. Set the number of bits on all curve definitions. Tested-by:
Vitaly Chikunov <vt@altlinux.org> Signed-off-by:
-
