- 03 Sep, 2011 22 commits
-
-
Arnaud Lacombe authored
Usage of these flags has been deprecated for nearly 4 years by: commit f77bf014 Author: Sam Ravnborg <sam@neptun.(none)> Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by:Arnaud Lacombe <lacombar@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Chris Rankin authored
Hi, The following patch adds the IR code for the missing "OK" key to the Pinnacle PCTV HD map. This map is now used by the PCTV 290e DVB-T2 device, whose remote control has 26 buttons. Signed-off-by:
Chris Rankin <rankincj@yahoo.com> Reviewed-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Julia Lawall authored
It seems just as necessary to free cam->vdev and cam in this error case as in the next one. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Marek Szyprowski authored
Both driver has been merged to v3.1-rc1, so add its authors as maintainers. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Dan Carpenter authored
There were a several problems in this function: 1) Potential integer overflow in the comparison: if (fio.write_len + fio.read_len > 1028) { 2) If the user gave bogus values for write_len and read_len then returning -EINVAL is more appropriate than returning -ENOMEM. 3) wbuf was set to the address of an array and could never be NULL so I removed the pointless NULL check. 4) The call to vfree(wbuf) was improper. That array is part of a larger struct and isn't allocated by itself. 5) flashio() can't actually fail, but we may as well add error handling in case this changes later. 6) In the default case where an ioctl is not implemented then returning -ENOTTY is more appropriate than returning -EFAULT. Signed-off-by:Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Steve Kerrison authored
This patch implements an i2c_gate_ctrl op for the cxd2820r. Thanks to Robert Schlabbach for identifying the register address and field to set. The old i2c intercept code that prefixed messages with a passthrough byte has been removed and the PCTV nanoStick T2 290e entry in em28xx-dvb has been updated appropriately. Tested for DVB-T2 use; I would appreciate it if somebody with DVB-C capabilities could test it as well - from inspection I cannot see any problems. This is patch v2. It fixes some schoolboy style errors and removes superfluous i2c entries in cxd2820r.h. Signed-off-by:
Steve Kerrison <steve@stevekerrison.com> Acked-by:
Antti Palosaari <crope@iki.fi> Tested-by:
-
Andreas Oberritter authored
Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Andreas Oberritter authored
- Move voltage and tone to DVB-S. - Add turbo code. - In DVB-S2 and turbo code sections, refer to DVB-S, as both are extensions to DVB-S. - Add modulation to DVB-S2. Signed-off-by:
-
Andreas Oberritter authored
Signed-off-by:
-
Andreas Oberritter authored
identify a satellite receiver by its 'delivery_system' instead of 'modulation', which may overlap between different delivery systems. Signed-off-by:
-
Andreas Oberritter authored
Signed-off-by:
-
Dan Carpenter authored
The ret = -EIO needs to be before the goto. Signed-off-by:
-
Dan Carpenter authored
The goto needs to be moved after the assignment. Signed-off-by:
-
Mauro Carvalho Chehab authored
Tuners in general convert a high frequency carrier into an Intermediate Frequency (IF). Digital tuners like tda18271, xc3028, etc. generally allow changing the IF frequency, although they generally have recommented settings for the IF. Analog tuners, have a fixed IF frequency, that depends on the physical characteristics of some analog components. For digital tuners, it makes sense to have ways to configure IF, via the tuner's configuration structure, like what's done inside the tda18271-fe maps. The demods need to know what IF is used by the tuner, as it will need to convert internally from IF into baseband. Currently, the bridge driver needs to fill a per-demod configuration struct for it, or pass it via a dvb_attach parameter. The tda18271 datasheet recommends to use different IF's for different delivery system types and for different bandwidths. The DRX-K demod also needs to know the IF frequency in order to work, just like all other demods. However, as it accepts different delivery systems (DVB-C and DVB-T), the IF may change if the standard and/or bandwidth is changed. So, the usual procedure of passing it via a config struct doesn't work. One might try to code it as two separate IF frequencies, or even as a table in function of the delivery system and the bandwidth, but this will be messy. So, it is better and simpler to just add a new callback for it and require the tuners that can be used with MFE frontends like drx-k to implement a new callback to return the used IF. Signed-off-by:
-
Jarod Wilson authored
Makes it more straight-forward to follow stack traces if the functions don't have generic names. Using this as a crutch while trying to better understand the lockdep warnings I get when loading the em28xx driver. CC: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jonathan Corbet authored
The one in-tree videobuf2-dma-sg driver (mmp-camera) has no need for a kernel-space mapping of the buffers; one suspects that most other drivers would not either. The videobuf2-dma-sg module does the right thing if buf->vaddr == NULL - it maps the buffer on demand if somebody needs it. So let's not map the buffer at allocation time; that will save a little CPU time and a lot of address space in the vmalloc range. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Acked-by:
-
Andreas Oberritter authored
- fepriv->parameters_out isn't protected by events->mtx, so move the call to fe->ops.get_frontend out of the locked area. - move the assignment of e->status into the locked area. - use direct assignment instead of memcpy. - use mutex_lock instead of mutex_lock_interruptible, because all code paths protected by this mutex won't block. Signed-off-by: -
Andreas Oberritter authored
the first event after an attempt to tune. Signed-off-by:
-
Andreas Oberritter authored
enqueued before the frontend thread wakes up. Signed-off-by:
-
Andreas Oberritter authored
Modify it to use the data given by the user. Signed-off-by:
-
Julia Lawall authored
Delete nontrivial initialization that is immediately overwritten by the result of an allocation function. The semantic match that makes this change is as follows: // <smpl> @@ type T; identifier i; expression e; @@ ( T i = \(0\|NULL\|ERR_PTR(...)\); | -T i = e; +T i; ) ... when != i i = \(kzalloc\|kcalloc\|kmalloc\)(...); // </smpl> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
- 01 Sep, 2011 1 commit
-
-
Mauro Carvalho Chehab authored
> [34883.426065] tm6000 #0: registered device video0 > [34883.430591] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0) > [34883.437763] usbcore: registered new interface driver tm6000 > [34884.608372] BUG: unable to handle kernel NULL pointer dereference at 00000002 > [34884.615514] IP: [<f8c4ceea>] tm6000_reset+0xd7/0x11c [tm6000] The dev->int_in USB interfaces is used by some devices for the Remote Controller. Not all devices seem to define this interface, so, tm6000_reset should not try to set the interface to it on such devices. Signed-off-by:
-
- 31 Aug, 2011 17 commits
-
-
Thierry Reding authored
Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Thierry Reding authored
Signed-off-by:
-
Thierry Reding authored
When releasing hardware resources, the DMA buffer allocated to the PCM device needs to be freed to prevent a memory leak. Signed-off-by:
-
Thierry Reding authored
If the radio device is opened there is no need to initialize the video buffer queue because it is not used. Signed-off-by:
-
Thierry Reding authored
When the last user closes the device, perform a lightweight reset of the device to bring it into a well-known state. Note that this is not always enough with the TM6010, which sometimes needs a hard reset to get into a working state again. Signed-off-by:
-
Thierry Reding authored
This fixes a memory leak where isochronous buffers would be set up for each video buffer, while it is sufficient to set them up only once per device. Signed-off-by:
-
Thierry Reding authored
When the USB device is disconnected, the device usage bit is not cleared properly. This leads to errors when a device is unplugged and replugged several times until all TM6000_MAXBOARDS bits are used and keeps the driver from binding to the device. Signed-off-by:
-
Thierry Reding authored
This commit introduces the usb_lock mutex to ensure that a USB request always gets the proper response. While this is currently not really necessary it will become important as there are more users. Signed-off-by:
-
Thierry Reding authored
This commit uses sentinel entries to terminate the TV standard register tables instead of hard-coding their size, allowing further entries to be added more easily. It is also more space-efficient if the tables have a varying number of entries. Signed-off-by:
-
Thierry Reding authored
Video data is useless in radio mode, so the corresponding interface can be safely disabled. This should reduce the amount of isochronous traffic noticeably. Signed-off-by:
-
Thierry Reding authored
The register ACTIVE_VIDEO_IF register should be named ACTIVE_IF since it controls more than just the video interface. Signed-off-by:
-
Thierry Reding authored
This brings the IRQ callback implementation more in line with how other drivers do it. Signed-off-by:
-
Thierry Reding authored
Signed-off-by:
-
Thierry Reding authored
In radio mode, the correct input is rinput. The pseudo index 5 is used but cannot be used to index the vinput array because that only has 3 elements. Signed-off-by:
-
Thierry Reding authored
This commit fixes a number of coding style issues as well as some issues reported by checkpatch and sparse. Signed-off-by:
-
Mauro Carvalho Chehab authored
In radio mode, no frequency offset should be used. Instead of taking Thierry's patch that creates a separate function to calculate the digital offset, it seemed better to just keep everything at the same place. Reported-by:
-
Thierry Reding authored
When loading the firmware, complete each chunk by sending an I2C flush command to the frontend. Some devices like the tm6000 seem to require this to properly flush the I2C buffers. The current code in tm6000 executes the flush command once after each I2C transfer, which slows down the firmware loading especially when loading large BASE type images. Signed-off-by:
-
