- 01 Jul, 2024 1 commit
-
-
Dinesh Karthikeyan authored
Create debugfs_htt_stats file when ath12k debugfs support is enabled. Add basic ath12k_debugfs_htt_stats_register and handle htt_stats_type file operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by:
Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-2-quic_rgnanase@quicinc.com
-
- 27 Jun, 2024 1 commit
-
-
Rameshkumar Sundaram authored
Commit 4a3c212e ("wifi: ath12k: add basic WoW functionalities") broke driver initialization, now mac registration is allowed only for devices that advertise WMI_TLV_SERVICE_WOW, but QCN9274 doesn't support WoW and hence mac registration is aborted and driver is de-initialized. Allow mac registration to proceed without WoW Support for devices that don't advertise WMI_TLV_SERVICE_WOW. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 4a3c212e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by:
Rameshkumar Sundaram <quic_ramess@quicinc.com> Acked-by:
-
- 26 Jun, 2024 2 commits
-
-
Karthikeyan Periyasamy authored
Currently, the Rx data path only supports parsing peer metadata of version zero. However, the QCN9274 platform configures the peer metadata version as V1B. When V1B peer metadata is parsed using the version zero logic, invalid data is populated, causing valid packets to be dropped. To address this issue, refactor the peer metadata version and add the version based parsing to populate the data from peer metadata correctly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 28703381 ("wifi: ath12k: add support for peer meta data version") Signed-off-by:
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by:
-
Lingbo Kong authored
Pdev id from mac phy capabilities will be sent as a part of HTT/WMI command to firmware. This causes issue with single pdev devices where firmware does not respond to the WMI/HTT request sent from host. For single pdev devices firmware expects pdev id as 1 for 5 GHz/6 GHz phy and 2 for 2 GHz band. Add wrapper ath12k_mac_get_target_pdev_id() to help fetch right pdev for single pdev devices. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
Lingbo Kong <quic_lingbok@quicinc.com> Signed-off-by:
-
- 24 Jun, 2024 8 commits
-
-
Baochen Qiang authored
With WoWLAN enabled and after sleeping for a rather long time, we are seeing that with some APs, it is not able to wake up the STA though the correct wake up pattern has been configured. This is because the host doesn't send keepalive command to firmware, thus firmware will not send any packet to the AP and after a specific time the AP kicks out the STA. So enable keepalive before going to suspend and disable it after resume back. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Acked-by:
-
Baochen Qiang authored
Host sets GTK related info to firmware before WoW is enabled, and gets rekey replay_count and then disables GTK rekey when WoW quits. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
Support ARP and NS offload in WoW state. Tested this way: put machine A with QCA6390 to WoW state, ping/ping6 machine A from another machine B, check sniffer to see any ARP response and Neighbor Advertisement from machine A. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
Host needs to set hardware data filter before entering WoW to let firmware drop needless broadcast/multicast frames to avoid frequent wakeup. Host clears hardware data filter when leaving WoW. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
Implement net-detect feature by setting flag WIPHY_WOWLAN_NET_DETECT if firmware supports this feature. Driver sets the related PNO configuration to firmware before entering WoW and firmware then scans periodically and wakes up host if a specific SSID is found. Note that firmware crashes if we enable it for both P2P vdev and station vdev simultaneously because firmware can only support one vdev at a time. Since there is rare scenario for a P2P vdev to do net-detect, skip it for P2P vdevs. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
Implement basic WoW functionalities such as magic-packet, disconnect and pattern. The logic is very similar to ath11k. When WoW is configured, ath12k_core_suspend and ath12k_core_resume are skipped (by checking ar->state) as we are not allowed to power cycle firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
Implement WoW enable and WoW wakeup commands which are needed for suspend/resume. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
Currently there is no dedicated log level for WoW, so create it for future use. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
- 19 Jun, 2024 7 commits
-
-
Karthikeyan Periyasamy authored
The Current method for advertising the maximum MBSSID interface count assumes single radio per wiphy (multi wiphy model). However, this assumption is incorrect for multi radio per wiphy (single wiphy model). Therefore, populate the parameter for each radio present in the MAC abstraction layer (ah). This approach ensure scalability for both single wiphy and multi wiphy models. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 519a545c ("wifi: ath12k: advertise driver capabilities for MBSSID and EMA") Signed-off-by:
-
Ajith C authored
Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Ajith C <quic_ajithc@quicinc.com> Acked-by:
-
Pradeep Kumar Chitrapu authored
Currently SMPS configuration failed when the Information Elements (IEs) did not contain HT or 6 GHz capabilities. This caused legacy peer association to fail as legacy peers do not have HT or 6 GHz capabilities. Fix this by not returning an error when SMPS configuration fails due to the absence of HT or 6 GHz capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: f0e61dc7 ("wifi: ath12k: refactor SMPS configuration") Reported-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Reported-by:
Zachary Smith <dr.z.smith@gmail.com> Closes: https://lore.kernel.org/all/CAM=znoFPcXrn5GhDmDmo50Syic3-hXpWvD+vkv8KX5o_ZTo8kQ@mail.gmail.com/Signed-off-by:
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Reported-by:
-
Aaradhana Sahu authored
Smatch throws following errors drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'. drivers/net/wireless/ath/ath12k/mac.c:1924 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. In ath12k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 variables remain uninitialized in the following conditions: 1. Whenever the value of mcs_80 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_80 remains uninitialized. 2. Whenever phy capability is not supported 160 channel width and value of mcs_160 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_160 remains uninitialized. Initialize these variables during declaration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Aaradhana Sahu <quic_aarasahu@quicinc.com> Acked-by:
-
Aaradhana Sahu authored
Smatch throws below error drivers/net/wireless/ath/ath12k/mac.c:8318 ath12k_mac_op_get_survey() error: we previously assumed 'sband' could be null Currently, we access sband inside the null check of the sband in ath12k_mac_op_get_survey(). Fix this issue by removing the entire if block, because decrement idx is unnecessary since there are no more band to test. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 70e3be54 ("wifi: ath12k: fix survey dump collection in 6 GHz") Signed-off-by:
-
Lingbo Kong authored
Currently, the calculation of the average signal strength in station mode is incorrect. This is because before calculating the average signal strength, ath11k need to determine whether the hardware and firmware support db2dbm, if the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Lingbo Kong authored
Currently, the calculation of ack signal strength is incorrect. This is because before calculating the ack signal strength, ath11k need to determine whether the hardware and firmware support db2dbm. If the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Besides, the value of ack_rssi passed by firmware to ath11k should be a signed number, so change its type to s8. After that, "iw wlan0 station dump" show the correct ack signal strength. Such as: root@CDCCSTEX0799733-LIN:~# iw wlp88s0 station dump Station 00:03:7f:12:df:df (on wlp88s0) inactive time: 75 ms rx bytes: 11599 rx packets: 99 tx bytes: 9029 tx packets: 81 tx retries: 4 tx failed: 0 rx drop misc: 2 signal: -16 dBm signal avg: -24 dBm tx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4 tx duration: 9230 us rx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4 rx duration: 7201 us last ack signal:-23 dBm avg ack signal: -22 dBm Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 17 Jun, 2024 4 commits
-
-
Harshitha Prem authored
Currently, device (ab) reference in hardware abstraction (ah) is not used anywhere. Also, with multiple device group abstraction, hardware abstraction would be coupled with device group abstraction rather than single device. Hence, remove the ab reference from hardware abstraction. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Harshitha Prem <quic_hprem@quicinc.com> Acked-by:
-
Aaradhana Sahu authored
Whenever firmware is crashed in split-phy below WARN_ON() triggered: WARNING: CPU: 3 PID: 82 at net/mac80211/driver-ops.c:41 drv_stop+0xac/0xbc Modules linked in: ath12k qmi_helpers CPU: 3 PID: 82 Comm: kworker/3:2 Tainted: G D W 6.9.0-next-20240520-00113-gd981a3784e15 #39 Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9 (DT) Workqueue: events_freezable ieee80211_restart_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drv_stop+0xac/0xbc lr : ieee80211_stop_device+0x54/0x64 sp : ffff8000848dbb20 x29: ffff8000848dbb20 x28: 0000000000000790 x27: ffff000014d78900 x26: ffff000014d791f8 x25: ffff000007f0d9b0 x24: 0000000000000018 x23: 0000000000000001 x22: 0000000000000000 x21: ffff000014d78e10 x20: ffff800081dc0000 x19: ffff000014d78900 x18: ffffffffffffffff x17: ffff7fffbca84000 x16: ffff800083fe0000 x15: ffff800081dc0b48 x14: 0000000000000076 x13: 0000000000000076 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff8000848db980 x8 : ffff000000dddfc0 x7 : 0000000000000400 x6 : ffff800083b012d8 x5 : ffff800083b012d8 x4 : 0000000000000000 x3 : ffff000014d78398 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000014d78900 Call trace: drv_stop+0xac/0xbc ieee80211_stop_device+0x54/0x64 ieee80211_do_stop+0x5a0/0x790 ieee80211_stop+0x4c/0x178 __dev_close_many+0xb0/0x150 dev_close_many+0x88/0x130 dev_close.part.171+0x44/0x74 dev_close+0x1c/0x28 cfg80211_shutdown_all_interfaces+0x44/0xfc ieee80211_restart_work+0xfc/0x14c process_scheduled_works+0x18c/0x2dc worker_thread+0x13c/0x314 kthread+0x118/0x124 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- The warning in question is from drv_stop(): if (WARN_ON(!local->started)) return; The sequence of WARN_ON() is: Thread 1: -Firmware crash calls ath12k_core_reset(). -Call ieee80211_restart_hw() inside ath12k_core_post_reconfigure_recovery() which schedules worker for both hardware. -Wait for completion of ab->recovery_start. Thread 2 (worker thread): -One hardware acquires rtnl_lock() inside ieee80211_restart_hw() and calls ath12k_mac_wait_reconfigure() into ath12k_mac_op_start(). -Hardware is waiting for ab->reconfigure_complete but at this time recovery_start_count value is 1 because another worker thread (local->restart_work) is still waiting for rtnl_lock(). recovery_start_count is not equal to number of radios (2 in split-phy). So ab->recovery_start complete does not set due to this, thread 1 is still waiting and not able to perform hif power down up and firmware reload. -Wait timeout happens for ab->reconfigure_complete and comeback to caller (ath12k_mac_op_start()) and sends WMI command to crashed firmware and gets error. -This returns error to drv_start() and local->started is set to false. -Hardware calls cfg80211_shutdown_all_interfaces() after receiving error inside ieee80211_restart_work() and goes to drv_stop(), here we trigger WARN_ON as local->started is false. To fix this issue call ieee80211_restart_hw() after firmware has been reloaded. Now, each hardware can send WMI command to firmware successfully. With this fix we don't need to wait for ab->recovery_start completion so remove ath12k_mac_wait_reconfigure(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Bartosz Golaszewski authored
Add device-tree bindings for the ATH12K module found in the WCN7850 package. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Bartosz Golaszewski authored
Add a PCI compatible for the ATH11K module on QCA6390 and describe the power inputs from the PMU that it consumes. Reviewed-by:
-
- 11 Jun, 2024 16 commits
-
-
Aditya Kumar Singh authored
Whenever per pdev debugfs directory is created, a symlink to it is also placed in ieee80211/phy* directory. During clean up of per pdev debugfs, this symlink also needs to be cleaned up. Add changes to clean up the symlink whenever the per pdev debugfs is removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aditya Kumar Singh authored
During normal de-initialization path or if any error happens while registering the hardware, there is no support to unregister the per pdev debugfs. Add support for the same. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aditya Kumar Singh authored
Function ath12k_debugfs_register() is called once inside the function ath12k_mac_hw_register(). However, with single wiphy model, there could be multiple pdevs registered under single hardware. Hence, need to register debugfs for each one of them. Move the caller inside the loop which iterates over all underlying pdevs. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: f8bde02a ("wifi: ath12k: initial debugfs support") Signed-off-by:
-
Baochen Qiang authored
Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key() IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi() a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers. This results in unexpected management frame drop in case either of above 3 ciphers is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211 will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved is wrong. Such frame is dropped later by hardware: ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0 ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1 From user point of view, we have observed very low throughput due to this issue: action frames are all dropped so ADDBA response from DUT never reaches AP. AP can not use aggregation thus throughput is low. Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper MIC length for those ciphers. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Reported-by:
Yaroslav Isakov <yaroslav.isakov@gmail.com> Tested-by:
-
Karthikeyan Periyasamy authored
Currently, in the Rx error processing handler, once an MSDU drop is detected, the subsequent MSDUs get unintentionally dropped due to the previous drop flag being retained across all MSDU processing, leading to the discarding of valid MSDUs. To resolve this issue, the drop flag should be reset to false before processing each descriptor. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Wolfram Sang authored
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_event_timeout() causing patterns like: timeout = wait_event_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Fix to the proper variable type 'long' while here. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Baochen Qiang authored
Current documentation on RCU in ath11k_mac_op_ipv6_changed() says: /* Note: read_lock_bh() calls rcu_read_lock() */ read_lock_bh(&idev->lock); This is wrong because without enabling CONFIG_PREEMPT_RT rcu_read_lock() is not called by read_lock_bh(). The reason why current code works even in a CONFIG_PREEMPT_RT=n kernel is because atomic_notifier_call_chain() already does that for us, see: int atomic_notifier_call_chain() { ... rcu_read_lock(); ret = notifier_call_chain(&nh->head, val, v, -1, NULL); rcu_read_unlock(); ... } and backtrace: ath11k_mac_op_ipv6_changed ieee80211_ifa6_changed notifier_call_chain atomic_notifier_call_chain So update the comment to make it correct. This is found during code review, compile tested only. Fixes: feafe59c ("wifi: ath11k: use RCU when accessing struct inet6_dev::ac_list") Signed-off-by: -
Baochen Qiang authored
Currently ACPI notification handler is installed when driver loads and only gets removed when driver unloads. During resume after firmware is reloaded, ath12k tries to install it by default. Since it is installed already, ACPI subsystem rejects it and returns an error: [ 83.094206] ath12k_pci 0000:03:00.0: failed to install DSM notify callback: 7 Fix it by removing that handler when going to suspend. This also avoid any possible ACPI call to firmware before firmware is reloaded/reinitialized. Note ab->acpi also needs to be cleared in ath12k_acpi_stop() such that we are in a clean state when ACPI structures are reinitialized in ath12k_acpi_start(). Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 576771c9 ("wifi: ath12k: ACPI TAS support") Signed-off-by:
-
Rameshkumar Sundaram authored
When multiple radios are advertised as a single wiphy which supports various bands, vdev creation for the vif is deferred until channel is assigned to it. If a remain on channel (RoC) request is received from mac80211, select the corresponding radio (ar) based on channel and create a vdev on that radio to initiate an RoC scan. Note that on RoC completion this vdev is not deleted. If a new RoC/hw scan request is seen on that same vif for a different band the vdev will be deleted and created on the new radio supporting the request. Also if the RoC scan is requested when the vdev is in started state, no switching to new radio is allowed and RoC request can be accepted only on channels within same radio. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-06-03 This series includes miscellaneous improvements for the ice as well as a cleanup to the Makefiles for all Intel net drivers. Andy fixes all of the Intel net driver Makefiles to use the documented '*-y' syntax for specifying object files to link into kernel driver modules, rather than the '*-objs' syntax which works but is documented as reserved for user-space host programs. Jacob has a cleanup to refactor rounding logic in the ice driver into a common roundup_u64 helper function. Michal Schmidt replaces irq_set_affinity_hint() to use irq_update_affinity_hint() which behaves better with user-applied affinity settings. v2: https://lore.kernel.org/r/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com v1: https://lore.kernel.org/r/20240603-next-2024-06-03-intel-next-batch-v1-0-e0523b28f325@intel.com ==================== Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-0-d1470cee3347@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Michal Schmidt authored
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint() instead. This removes the side-effect of actually applying the affinity. The driver does not really need to worry about spreading its IRQs across CPUs. The core code already takes care of that. On the contrary, when the driver applies affinities by itself, it breaks the users' expectations: 1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in order to prevent IRQs from being moved to certain CPUs that run a real-time workload. 2. ice reconfigures VSIs at runtime due to a MIB change (ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the affinity in ice_vsi_req_irq_msix(). 3. ice has no idea about irqbalance's config, so it may move an IRQ to a banned CPU. The real-time workload suffers unacceptable latency. I am not sure if updating the affinity hints is at all useful, because irqbalance ignores them since 2016 ([1]), but at least it's harmless. This ice change is similar to i40e commit d34c54d1 ("i40e: Use irq_update_affinity_hint()"). [1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfddSigned-off-by:Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Sunil Goutham <sgoutham@marvell.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by:
-
Jacob Keller authored
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next second of a current time value specified in nanoseconds. It implements this using div64_u64, because the time value is a u64. It could use div_u64 since NSEC_PER_SEC is smaller than 32-bits. Ideally this would be implemented directly with roundup(), but that can't work on all platforms due to a division which requires using the specific macros and functions due to platform restrictions, and to ensure that the most appropriate and fast instructions are used. The kernel doesn't currently provide any 64-bit equivalents for doing roundup. Attempting to use roundup() on a 32-bit platform will result in a link failure due to not having a direct 64-bit division. The closest equivalent for this is DIV64_U64_ROUND_UP, which does a division always rounding up. However, this only computes the division, and forces use of the div64_u64 in cases where the divisor is a 32bit value and could make use of div_u64. Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement roundup_u64 which takes a u64 input value and a u32 rounding value. The name roundup_u64 matches the naming scheme of div_u64, and future patches could implement roundup64_u64 if they need to round by a multiple that is greater than 32-bits. Replace the logic in ice_ptp.c which does this equivalent with the newly added roundup_u64. Tested-by:
-
Andy Shevchenko authored
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcpci.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcmulti.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcsusb.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/avmfritz.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/speedfax.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNinfineon.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/w6692.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/netjet.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNipac.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNisar.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_dsp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/l1oip.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-06-06 We've added 54 non-merge commits during the last 10 day(s) which contain a total of 50 files changed, 1887 insertions(+), 527 deletions(-). The main changes are: 1) Add a user space notification mechanism via epoll when a struct_ops object is getting detached/unregistered, from Kui-Feng Lee. 2) Big batch of BPF selftest refactoring for sockmap and BPF congctl tests, from Geliang Tang. 3) Add BTF field (type and string fields, right now) iterator support to libbpf instead of using existing callback-based approaches, from Andrii Nakryiko. 4) Extend BPF selftests for the latter with a new btf_field_iter selftest, from Alan Maguire. 5) Add new kfuncs for a generic, open-coded bits iterator, from Yafang Shao. 6) Fix BPF selftests' kallsyms_find() helper under kernels configured with CONFIG_LTO_CLANG_THIN, from Yonghong Song. 7) Remove a bunch of unused structs in BPF selftests, from David Alan Gilbert. 8) Convert test_sockmap section names into names understood by libbpf so it can deduce program type and attach type, from Jakub Sitnicki. 9) Extend libbpf with the ability to configure log verbosity via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko. 10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness in nested VMs, from Song Liu. 11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba optimization, from Xiao Wang. 12) Enable BPF programs to declare arrays and struct fields with kptr, bpf_rb_root, and bpf_list_head, from Kui-Feng Lee. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits) selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca selftests/bpf: Add start_test helper in bpf_tcp_ca selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca libbpf: Auto-attach struct_ops BPF maps in BPF skeleton selftests/bpf: Add btf_field_iter selftests selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT libbpf: Remove callback-based type/string BTF field visitor helpers bpftool: Use BTF field iterator in btfgen libbpf: Make use of BTF field iterator in BTF handling code libbpf: Make use of BTF field iterator in BPF linker code libbpf: Add BTF field iterator selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find() selftests/bpf: Fix bpf_cookie and find_vma in nested VM selftests/bpf: Test global bpf_list_head arrays. selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types. selftests/bpf: Test kptr arrays and kptrs in nested struct fields. bpf: limit the number of levels of a nested struct type. bpf: look into the types of the fields of a struct type recursively. ... ==================== Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.netSigned-off-by: -
Jakub Kicinski authored
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by:
-
- 10 Jun, 2024 1 commit
-
-
David S. Miller authored
Marek Behún says: ==================== Fix changing DSA conduit This series fixes an issue in the DSA code related to host interface UC address installed into port FDB and port conduit address database when live-changing port conduit. The first patch refactores/deduplicates the installation/uninstallation of the interface's MAC address and the second patch fixes the issue. Cover letter for v1 and v2: https://patchwork.kernel.org/project/netdevbpf/cover/20240429163627.16031-1-kabel@kernel.org/ https://patchwork.kernel.org/project/netdevbpf/cover/20240502122922.28139-1-kabel@kernel.org/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
