- 08 Jan, 2018 40 commits
-
-
Pablo Neira Ayuso authored
We cannot make a direct call to nf_ip6_route() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define route indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This is only used by nf_queue.c and this function comes with no symbol dependencies with IPv6, it just refers to structure layouts. Therefore, we can replace it by a direct function call from where it belongs. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
We cannot make a direct call to nf_ip6_checksum_partial() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define checksum_partial indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
We cannot make a direct call to nf_ip6_checksum() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define checksum indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
This allows to reuse xt_connlimit infrastructure from nf_tables. The upcoming nf_tables frontend can just pass in an nftables register as input key, this allows limiting by any nft-supported key, including concatenations. For xt_connlimit, pass in the zone and the ip/ipv6 address. With help from Yi-Hung Wei. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
They don't belong to the family definition, move them to the filter chain type definition instead. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Since NFPROTO_INET is handled from the core, we don't need to maintain extra infrastructure in nf_tables to handle the double hook registration, one for IPv4 and another for IPv6. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Use new native NFPROTO_INET support in netfilter core, this gets rid of ad-hoc code in the nf_tables API codebase. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Expand NFPROTO_INET in two hook registrations, one for NFPROTO_IPV4 and another for NFPROTO_IPV6. Hence, we handle NFPROTO_INET from the core. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
So static_key_slow_dec applies to the family behind NFPROTO_INET. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Instead of passing struct nf_hook_ops, this is needed by follow up patches to handle NFPROTO_INET from the core. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Just a cleanup, __nf_unregister_net_hook() is used by a follow up patch when handling NFPROTO_INET as a real family from the core. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Add helper function to test for the NFT_SET_ANONYMOUS flag. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Instead of calling this function from the family specific variant, this reduces the code size in the fast path for the netdev, bridge and inet families. After this change, we must call nft_set_pktinfo() upfront from the chain hook indirection. Before: text data bss dec hex filename 2145 208 0 2353 931 net/netfilter/nf_tables_netdev.o After: text data bss dec hex filename 2125 208 0 2333 91d net/netfilter/nf_tables_netdev.o Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
46928a0b49f3 ("netfilter: nf_tables: remove multihook chains and families") already removed this, this is a leftover. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
No problem for iptables as priorities are fixed values defined in the nat modules, but in nftables the priority its coming from userspace. Reject in case we see that such a hook would not work. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
The netfilter NAT core cannot deal with more than one NAT hook per hook location (prerouting, input ...), because the NAT hooks install a NAT null binding in case the iptables nat table (iptable_nat hooks) or the corresponding nftables chain (nft nat hooks) doesn't specify a nat transformation. Null bindings are needed to detect port collsisions between NAT-ed and non-NAT-ed connections. This causes nftables NAT rules to not work when iptable_nat module is loaded, and vice versa because nat binding has already been attached when the second nat hook is consulted. The netfilter core is not really the correct location to handle this (hooks are just hooks, the core has no notion of what kinds of side effects a hook implements), but its the only place where we can check for conflicts between both iptables hooks and nftables hooks without adding dependencies. So add nat annotation to hook_ops to describe those hooks that will add NAT bindings and then make core reject if such a hook already exists. The annotation fills a padding hole, in case further restrictions appar we might change this to a 'u8 type' instead of bool. iptables error if nft nat hook active: iptables -t nat -A POSTROUTING -j MASQUERADE iptables v1.4.21: can't initialize iptables table `nat': File exists Perhaps iptables or your kernel needs to be upgraded. nftables error if iptables nat table present: nft -f /etc/nftables/ipv4-nat /usr/etc/nftables/ipv4-nat:3:1-2: Error: Could not process rule: File exists table nat { ^^ Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
currently we always return -ENOENT to userspace if we can't find a particular table, or if the table initialization fails. Followup patch will make nat table init fail in case nftables already registered a nat hook so this change makes xt_find_table_lock return an ERR_PTR to return the errno value reported from the table init function. Add xt_request_find_table_lock as try_then_request_module replacement and use it where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
This can be same as NF_INET_NUMHOOKS if we don't support DECNET. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
no need to define hook points if the family isn't supported. Because we need these hooks for either nftables, arp/ebtables or the 'call-iptables' hack we have in the bridge layer add two new dependencies, NETFILTER_FAMILY_{ARP,BRIDGE}, and have the users select them. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
no need to define hook points if the family isn't supported. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Not all families share the same hook count, adjust sizes to what is needed. struct net before: /* size: 6592, cachelines: 103, members: 46 */ after: /* size: 5952, cachelines: 93, members: 46 */ Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
The kernel already has defines for this, but they are in uapi exposed headers. Including these from netns.h causes build errors and also adds unneeded dependencies on heads that we don't need. So move these defines to netfilter_defs.h and place the uapi ones in ifndef __KERNEL__ to keep them for userspace. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
struct net contains: struct nf_hook_entries __rcu *hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS]; which store the hook entry point locations for the various protocol families and the hooks. Using array results in compact c code when doing accesses, i.e. x = rcu_dereference(net->nf.hooks[pf][hook]); but its also wasting a lot of memory, as most families are not used. So split the array into those families that are used, which are only 5 (instead of 13). In most cases, the 'pf' argument is constant, i.e. gcc removes switch statement. struct net before: /* size: 5184, cachelines: 81, members: 46 */ after: /* size: 4672, cachelines: 73, members: 46 */ Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Giuseppe Scrivano says: "SELinux, if enabled, registers for each new network namespace 6 netfilter hooks." Cost for this is high. With synchronize_net() removed: "The net benefit on an SMP machine with two cores is that creating a new network namespace takes -40% of the original time." This patch replaces synchronize_net+kvfree with call_rcu(). We store rcu_head at the tail of a structure that has no fixed layout, i.e. we cannot use offsetof() to compute the start of the original allocation. Thus store this information right after the rcu head. We could simplify this by just placing the rcu_head at the start of struct nf_hook_entries. However, this structure is used in packet processing hotpath, so only place what is needed for that at the beginning of the struct. Reported-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
since commit 960632ec ("netfilter: convert hook list to an array") nfqueue no longer stores a pointer to the hook that caused the packet to be queued. Therefore no extra synchronize_net() call is needed after dropping the packets enqueued by the old rule blob. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
This reverts commit d3ad2c17 ("netfilter: core: batch nf_unregister_net_hooks synchronize_net calls"). Nothing wrong with it. However, followup patch will delay freeing of hooks with call_rcu, so all synchronize_net() calls become obsolete and there is no need anymore for this batching. This revert causes a temporary performance degradation when destroying network namespace, but its resolved with the upcoming call_rcu conversion. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Varsha Rao authored
Change old multi-line comment style to kernel comment style and remove unwanted comments. Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
When sets are extremely large we can get softlockup during ipset -L. We could fix this by adding cond_resched_rcu() at the right location during iteration, but this only works if RCU nesting depth is 1. At this time entire variant->list() is called under under rcu_read_lock_bh. This used to be a read_lock_bh() but as rcu doesn't really lock anything, it does not appear to be needed, so remove it (ipset increments set reference count before this, so a set deletion should not be possible). Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Check that we really hold nfnl mutex here instead of relying on correct usage alone. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
The param of frag_safe_skb_hp, ipvsh, isn't used now. So remove it and update the callers' codes too. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Nowadays this is just the default template that is used when setting up the net namespace, so nothing writes to these locations. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
previous patches removed all writes to these structs so we can now mark them as const. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
similar to previous commit, but instead compute this at compile time and turn nlattr_size into an u16. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
David S. Miller authored
Ido Schimmel says: ==================== ipv6: Align nexthop behaviour with IPv4 This set tries to eliminate some differences between IPv4's and IPv6's treatment of nexthops. These differences are most likely a side effect of IPv6's data structures (specifically 'rt6_info') that incorporate both the route and the nexthop and the late addition of ECMP support in commit 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)"). IPv4 and IPv6 do not react the same to certain netdev events. For example, upon carrier change affected IPv4 nexthops are marked using the RTNH_F_LINKDOWN flag and the nexthop group is rebalanced accordingly. IPv6 on the other hand, does nothing which forces us to perform a carrier check during route lookup and dump. This makes it difficult to introduce features such as non-equal-cost multipath that are built on top of this set [1]. In addition, when a netdev is put administratively down IPv4 nexthops are marked using the RTNH_F_DEAD flag, whereas IPv6 simply flushes all the routes using these nexthops. To be consistent with IPv4, multipath routes should only be flushed when all nexthops in the group are considered dead. The first 12 patches introduce non-functional changes that store the RTNH_F_DEAD and RTNH_F_LINKDOWN flags in IPv6 routes based on netdev events, in a similar fashion to IPv4. This allows us to remove the carrier check performed during route lookup and dump. The next three patches make sure we only flush a multipath route when all of its nexthops are dead. Last three patches add test cases for IPv4/IPv6 FIB. These verify that both address families react similarly to netdev events. Finally, this series also serves as a good first step towards David Ahern's goal of treating nexthops as standalone objects [2], as it makes the code more in line with IPv4 where the nexthop and the nexthop group are separate objects from the route itself. 1. https://github.com/idosch/linux/tree/ipv6-nexthops 2. http://vger.kernel.org/netconf2017_files/nexthop-objects.pdf Changes since RFC (feedback from David Ahern): * Remove redundant declaration of rt6_ifdown() in patch 4 and adjust comment referencing it accordingly * Drop patch to flush multipath routes upon NETDEV_UNREGISTER. Reword cover letter accordingly * Use a temporary variable to make code more readable in patch 15 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Check that IPv4 and IPv6 react the same when the carrier of a netdev is toggled. Local routes should not be affected by this, whereas unicast routes should. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Check that IPv4 and IPv6 react the same when a netdev is being put administratively down. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Add test cases to check that IPv4 and IPv6 react to a netdev being unregistered as expected. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-