- 17 Jun, 2022 25 commits
-
-
CC Chou authored
Some MediaTek SoC chips need special flow for power mode change, especially for chips supporting HS-G5. Enable the workaround by setting the host-specific capability. Link: https://lore.kernel.org/r/20220616053725.5681-4-stanley.chu@mediatek.comReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
CC Chou <cc.chou@mediatek.com> Signed-off-by:
Eddie Huang <eddie.huang@mediatek.com> Signed-off-by:
Dennis Yu <tun-yu.yu@mediatek.com> Signed-off-by:
Peter Wang <peter.want@medaitek.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Stanley Chu authored
ADAPT now is added not only for HS Gear4 mode but also higher gears. Fix the logic for higher gears. Link: https://lore.kernel.org/r/20220616053725.5681-3-stanley.chu@mediatek.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Stanley Chu authored
Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for SoC-specific power mode change design limitations. Link: https://lore.kernel.org/r/20220616053725.5681-2-stanley.chu@mediatek.comReviewed-by:
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20220616053508.27186-12-njavali@marvell.comSigned-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Quinn Tran authored
Clear wait for mailbox interrupt flag to prevent stale mailbox: Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps). Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ... To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging the mailbox. When the stale mailbox completion does arrive, it will be dropped. Link: https://lore.kernel.org/r/20220616053508.27186-11-njavali@marvell.com Fixes: b6faaaf7 ("scsi: qla2xxx: Serialize mailbox request") Cc: Naresh Bannoth <nbannoth@in.ibm.com> Cc: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com> Cc: stable@vger.kernel.org Reported-by:
Naresh Bannoth <nbannoth@in.ibm.com> Tested-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Arun Easi authored
FCP-2 devices were not coming back online once they were lost, login retries exhausted, and then came back up. Fix this by accepting RSCN when the device is not online. Link: https://lore.kernel.org/r/20220616053508.27186-10-njavali@marvell.com Fixes: 44c57f20 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Arun Easi authored
Add a debug print in the devloss callback. Link: https://lore.kernel.org/r/20220616053508.27186-9-njavali@marvell.comSigned-off-by:
-
Arun Easi authored
FC target disappeared during port perturbation tests due to a race that tramples target state. Fix the issue by adding state checks before proceeding. Link: https://lore.kernel.org/r/20220616053508.27186-8-njavali@marvell.com Fixes: 44c57f20 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by:
-
Arun Easi authored
When a mix of FCP-2 (tape) and non-FCP-2 targets are present, FCP-2 target state was incorrectly transitioned when both of the targets were gone. Fix this by ignoring state transition for FCP-2 targets. Link: https://lore.kernel.org/r/20220616053508.27186-7-njavali@marvell.com Fixes: 44c57f20 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by:
-
Arun Easi authored
Ensure SRB is returned during I/O timeout error escalation. If that is not possible fail the escalation path. Following crash stack was seen: BUG: unable to handle kernel paging request at 0000002f56aa90f8 IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx] Call Trace: ? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx] ? qla2x00_start_sp+0x116/0x1170 [qla2xxx] ? dma_pool_alloc+0x1d6/0x210 ? mempool_alloc+0x54/0x130 ? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx] ? qla_do_work+0x2d/0x40 [qla2xxx] ? process_one_work+0x14c/0x390 Link: https://lore.kernel.org/r/20220616053508.27186-6-njavali@marvell.com Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") Cc: stable@vger.kernel.org Signed-off-by:
-
Quinn Tran authored
For 8G adapters, multi-queue was enabled accidentally. Make sure multi-queue is not enabled. Link: https://lore.kernel.org/r/20220616053508.27186-5-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by:
-
Quinn Tran authored
Put adapter into a wind down state if OS does not make any attempt to recover the adapter after PCIe error. Link: https://lore.kernel.org/r/20220616053508.27186-4-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by:
-
Bikash Hazarika authored
FW requires minimum 72 bytes buffer size for D_port result. Buffer size 1024 is mentioned in the FW spec so buffer size is increased to 1024. Rewrite the logic to handle START/RESTART command from SDMAPI. Link: https://lore.kernel.org/r/20220616053508.27186-3-njavali@marvell.comSigned-off-by:
Bikash Hazarika <bhazarika@marvell.com> Signed-off-by:
-
Arun Easi authored
Disable printing I/O error messages by default. The messages will be printed only when logging was enabled. Link: https://lore.kernel.org/r/20220616053508.27186-2-njavali@marvell.com Fixes: 8e2d81c6 ("scsi: qla2xxx: Fix excessive messages during device logout") Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Bogdanov authored
iscsi_data_xmit() (TX worker) is iterating over the queue of new SCSI commands concurrently with the queue being replenished. Only after the queue is emptied will we start sending pending DataOut PDUs. That leads to DataOut timeout on the target side and to connection reinstatement. Give priority to pending DataOut commands over new commands. Link: https://lore.kernel.org/r/20220607131953.11584-1-d.bogdanov@yadro.comReviewed-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
-
Alim Akhtar authored
Rearrange all the unipro and mphy addresses in their increasing order. Link: https://lore.kernel.org/r/20220615121204.16642-3-alim.akhtar@samsung.comReviewed-by:
Chanho Park <chanho61.park@samsung.com> Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
Alim Akhtar authored
UFS core already uses RX_MIN_ACTIVATETIME_CAPABILITY macro, let's use the same in driver as well instead of having a different macro name for the same offset. Link: https://lore.kernel.org/r/20220615121204.16642-2-alim.akhtar@samsung.comReviewed-by:
-
Alim Akhtar authored
Remove #defines as those are not used anywhere in the driver file. Link: https://lore.kernel.org/r/20220615121204.16642-1-alim.akhtar@samsung.comReviewed-by:
-
John Garry authored
In commit 05c6c029 ("scsi: pm80xx: Increase number of supported queues"), support for 80xx chip was improved by enabling multiple HW queues. In this, like other SCSI MQ HBA drivers at the time, the HW queues were not exposed to upper layer, and instead the driver managed the queues internally. However, this management duplicates blk-mq code. In addition, the HW queue management is sub-optimal for a system where the number of CPUs exceeds the HW queues - this is because queues are selected in a round-robin fashion, when it would be better to make adjacent CPUs submit on the same queue. And finally, the affinity of the completion queue interrupts is not set to mirror the cpu<->HQ queue mapping, which is suboptimal. As such, for when MSIX is supported, expose HW queues to upper layer. We always use queue index #0 for "internal" commands, i.e. anything which does not come from the block layer, so omit this from the affinity spreading. Link: https://lore.kernel.org/r/1654879602-33497-5-git-send-email-john.garry@huawei.comTested-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
John Garry authored
In pm8001_tag_alloc() we don't require atomic set_bit() as we are already in atomic context. In pm8001_tag_free() we should use the same host spinlock to protect clearing the tag (and then don't require the atomic clear_bit()). Link: https://lore.kernel.org/r/1654879602-33497-4-git-send-email-john.garry@huawei.comTested-by:
-
John Garry authored
The current code is buggy in that the tags are set up after they are needed in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag depth is earlier read in pm80xx_chip_init() -> read_main_config_table(). Add a post init callback to do the pm80xx work which needs to be done after reading the tags. I don't see a better way to do this. Link: https://lore.kernel.org/r/1654879602-33497-3-git-send-email-john.garry@huawei.comTested-by:
-
John Garry authored
Some values in pm8001_prep_sas_ha_init() are set the same as they would be set in scsi_host_alloc(), or could be in the sht (which would be better), or later just overwritten, so rework the following: - cmd_per_lun can be set in the sht - max_lun and max_channel are as scsi_host_alloc() (so no need to set) - can_queue is later overwritten (so don't set in pm8001_prep_sas_ha_init()) Link: https://lore.kernel.org/r/1654879602-33497-2-git-send-email-john.garry@huawei.comTested-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Constify the drv data because it should not be modified (used by multiple devices). Link: https://lore.kernel.org/r/20220613101429.114449-1-krzysztof.kozlowski@linaro.orgReviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Xiu Jianfeng authored
Use memset_startat() helper to simplify the code, no functional changes. Link: https://lore.kernel.org/r/20220613021851.59699-1-xiujianfeng@huawei.comReviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by:
-
Yang Li authored
Fix following coccicheck error: ./drivers/target/iscsi/iscsi_target_nego.c:831:13-26: ERROR: se_nacl is NULL but dereferenced. Link: https://lore.kernel.org/r/20220613014321.107045-1-yang.lee@linux.alibaba.com Fixes: a75fcb09 ("scsi: target: iscsi: Extract auth functions") Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
- 14 Jun, 2022 8 commits
-
-
Yoshihiro Shimoda authored
Add maintainer for Renesas UFS driver. Link: https://lore.kernel.org/r/20220603110524.1997825-6-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
Add support for Renesas R-Car UFS controller which needs vendor-specific initialization. Link: https://lore.kernel.org/r/20220603110524.1997825-5-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports auto-hibernate the capability but only FASTAUTO mode. Link: https://lore.kernel.org/r/20220603110524.1997825-4-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not support 64-bit addressing. Link: https://lore.kernel.org/r/20220603110524.1997825-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Document Renesas R-Car UFS host controller for R-Car S4-8 (r8a779f0). Link: https://lore.kernel.org/r/20220603110524.1997825-2-yoshihiro.shimoda.uh@renesas.comReviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alim Akhtar authored
Adds support of UFS HCI which is found in Tesla Full Self-Driving (FSD) SoC. Link: https://lore.kernel.org/r/20220610104119.66401-7-alim.akhtar@samsung.comCo-developed-by:
Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by:
-
Alim Akhtar authored
Bit[3] of HCI_CLKSTOP_CTRL register is for enabling/disabling MPHY APB clock. Lets add it to CLK_STOP_MASK, so that the same can be controlled during clock masking/unmasking. Link: https://lore.kernel.org/r/20220610104119.66401-6-alim.akhtar@samsung.comTested-by:
-
Alim Akhtar authored
Adds tesla,fsd-ufs compatible for Tesla FSD SoC. Link: https://lore.kernel.org/r/20220610104119.66401-5-alim.akhtar@samsung.comAcked-by:
-
- 10 Jun, 2022 7 commits
-
-
Damien Le Moal authored
Similarly to sas report general and discovery responses, define the structure struct smp_rps_resp to handle SATA PHY report responses using a structure with a size that is exactly equal to the sas defined response size. With this change, struct smp_resp becomes unused and is removed. Link: https://lore.kernel.org/r/20220609022456.409087-4-damien.lemoal@opensource.wdc.comReviewed-by:
-
Damien Le Moal authored
When compiling with gcc 12, several warnings are thrown by gcc when compiling drivers/scsi/libsas/sas_expander.c, e.g.: In function ‘sas_get_ex_change_count’, inlined from ‘sas_find_bcast_dev’ at drivers/scsi/libsas/sas_expander.c:1816:8: drivers/scsi/libsas/sas_expander.c:1781:20: warning: array subscript ‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned char[32]’ [-Warray-bounds] 1781 | if (rg_resp->result != SMP_RESP_FUNC_ACC) { | ~~~~~~~^~~~~~~~ This is due to the use of the struct smp_resp to aggregate all possible response types using a union but allocating a response buffer with a size exactly equal to the size of the response type needed. This leads to access to fields of struct smp_resp from an allocated memory area that is smaller than the size of struct smp_resp. Fix this by defining struct smp_rg_resp for sas report general responses. Link: https://lore.kernel.org/r/20220609022456.409087-3-damien.lemoal@opensource.wdc.comReviewed-by: -
Damien Le Moal authored
When compiling with gcc 12, several warnings are thrown by gcc when compiling drivers/scsi/libsas/sas_expander.c, e.g.: In function ‘sas_get_phy_change_count’, inlined from ‘sas_find_bcast_phy.constprop’ at drivers/scsi/libsas/sas_expander.c:1737:9: drivers/scsi/libsas/sas_expander.c:1697:39: warning: array subscript ‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned char[56]’ [-Warray-bounds] 1697 | *pcc = disc_resp->disc.change_count; | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~ This is due to the use of the struct smp_resp to aggregate all possible response types using a union but allocating a response buffer with a size exactly equal to the size of the response type needed. This leads to access to fields of struct smp_resp from an allocated memory area that is smaller than the size of struct smp_resp. Fix this by defining struct smp_disc_resp for sas discovery operations. Since this structure and the generic struct smp_resp are identical for the little endian and big endian archs, move the definition of these structures at the end of include/scsi/sas.h to avoid repeating their definition. Link: https://lore.kernel.org/r/20220609022456.409087-2-damien.lemoal@opensource.wdc.comReviewed-by: -
Nilesh Javali authored
Link: https://lore.kernel.org/r/20220608115849.16693-11-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Quinn Tran authored
User experience slow recovery when target device went through a stop/start of the authentication application (app_stop/app_start). Between the period of app_stop and app_start on the target device, target device choose to send ELS Reject for any receive AUTH ELS command. At this time, authentication application does not do ELS reject if it encounters error. Therefore, AUTH ELS reject signify authentication application is not running. If driver passes up the AUTH ELS Reject to the authentication application, then it would result in authentication application retrying/resending the same AUTH ELS command again + delay. As a work around, driver should trigger a session tear down where it tells the local authentication application to also tear down. At the next relogin, both sides are then synchronized. Link: https://lore.kernel.org/r/20220608115849.16693-10-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
For N2N + remote WWPN is bigger than local adapter, remote adapter will login to local adapter while authentication application is not running. When authentication application starts, the current session in FW needs to to be invalidated. Make sure the old session is torn down before triggering a relogin. Link: https://lore.kernel.org/r/20220608115849.16693-9-njavali@marvell.com Fixes: 4de067e5 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by:
-
Quinn Tran authored
The driver failed to send implicit logout on session delete. For edif, this failed to flush any lingering SA index in FW. Set a flag to turn on implicit logout early in the session recovery to make sure the logout will go out in case of error. Link: https://lore.kernel.org/r/20220608115849.16693-8-njavali@marvell.com Fixes: 4de067e5 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by:
-
