- 08 Dec, 2021 30 commits
-
-
Vladimir Oltean authored
I have seen too many bugs already due to the fact that we must encode an invalid dp->bridge_num as a negative value, because the natural tendency is to check that invalid value using (!dp->bridge_num). Latest example can be seen in commit 1bec0f05 ("net: dsa: fix bridge_num not getting cleared after ports leaving the bridge"). Convert the existing users to assume that dp->bridge_num == 0 is the encoding for invalid, and valid bridge numbers start from 1. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Alexandra Winter says: ==================== s390/net: updates 2021-12-06 This brings some maintenance improvements and removes some unnecessary code checks. ==================== Link: https://lore.kernel.org/r/20211207090452.1155688-1-wintera@linux.ibm.comSigned-off-by:
-
Julian Wiedmann authored
If qeth_check_outbound_queue() finds a partially filled TX buffer on the queue and flushes it, then the queue _must_ have been in packing mode. Remove the redundant check when updating the relevant statistics. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Avoid a conditional branch for L2 devices when selecting the TX queue, and have shared logic for OSA devices. Signed-off-by:
-
Julian Wiedmann authored
qeth_l2_detect_dev2br_support() will only set brport_hw_features for IQD devices. So qeth_l2_bridge_getlink() and qeth_l2_bridge_setlink() will always return -EOPNOTSUPP on OSA devices. Just don't offer these callbacks instead. Signed-off-by:
-
Julian Wiedmann authored
Splitting up the netdev_ops allows for fine-tuning some of the ndo's in subsequent patches. Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Now that the OSN code is gone, we don't need the second switch statement in the RX path. And getting rid of its (unreachable) default case is a nice simplification. Also don't pass in the full HW header, all we still need is a flag to indicate whether the skb can use CSO. This we can already obtain during the first peek at the HW header. Signed-off-by:
-
Kees Cook authored
When building under -Warray-bounds, the compiler is especially conservative when faced with casts from a smaller object to a larger object. While this has found many real bugs, there are some cases that are currently false positives (like here). With this as one of the last few instances of the warning in the kernel before -Warray-bounds can be enabled globally, rearrange the functions so that there is a header-only version of hvs_send_data(). Silences this warning: net/vmw_vsock/hyperv_transport.c: In function 'hvs_shutdown_lock_held.constprop': net/vmw_vsock/hyperv_transport.c:231:32: warning: array subscript 'struct hvs_send_buf[0]' is partly outside array bounds of 'struct vmpipe_proto_header[1]' [-Warray-bounds] 231 | send_buf->hdr.pkt_type = 1; | ~~~~~~~~~~~~~~~~~~~~~~~^~~ net/vmw_vsock/hyperv_transport.c:465:36: note: while referencing 'hdr' 465 | struct vmpipe_proto_header hdr; | ^~~ This change results in no executable instruction differences. Signed-off-by:Kees Cook <keescook@chromium.org> Acked-by:
Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20211207063217.2591451-1-keescook@chromium.orgSigned-off-by:
-
Yihao Han authored
Fix following coccicheck warning: /drivers/net/dsa/ocelot/felix_vsc9959.c:1627:13-20: WARNING opportunity for kmemdup /drivers/net/dsa/ocelot/felix_vsc9959.c:1506:16-23: WARNING opportunity for kmemdup Signed-off-by:
Yihao Han <hanyihao@vivo.com> Reviewed-by:
-
Jakub Kicinski authored
Colin Foster says: ==================== prepare ocelot for external interface control This patch set is derived from an attempt to include external control for a VSC751[1234] chip via SPI. That patch set has grown large and is getting unwieldy for reviewers and the developers... me. I'm breaking out the changes from that patch set. Some are trivial net: dsa: ocelot: remove unnecessary pci_bar variables net: dsa: ocelot: felix: Remove requirement for PCS in felix devices some are required for SPI net: dsa: ocelot: felix: add interface for custom regmaps and some are just to expose code to be shared net: mscc: ocelot: split register definitions to a separate file The entirety of this patch set should have essentially no impact on the system performance. ==================== Link: https://lore.kernel.org/r/20211207170030.1406601-1-colin.foster@in-advantage.comSigned-off-by:
-
Colin Foster authored
Move these to a separate file will allow them to be shared to other drivers. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Colin Foster authored
Add an interface so that non-mmio regmaps can be used Signed-off-by:
-
Colin Foster authored
Existing felix devices all have an initialized pcs array. Future devices might not, so running a NULL check on the array before dereferencing it will allow those future drivers to not crash at this point Signed-off-by:
-
Colin Foster authored
The pci_bar variables for the switch and imdio don't make sense for the generic felix driver. Moving them to felix_vsc9959 to limit scope and simplify the felix_info struct. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211206091207.113648-1-colin.i.king@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 First set of patches for v5.17. The biggest change is the iwlmei driver for Intel's AMT devices. Also now WCN6855 support in ath11k should be usable. Major changes: ath10k * fetch (pre-)calibration data via nvmem subsystem ath11k * enable 802.11 power save mode in station mode for qca6390 and wcn6855 * trace log support * proper board file detection for WCN6855 based on PCI ids * BSS color change support rtw88 * add debugfs file to force lowest basic rate * add quirk to disable PCI ASPM on HP 250 G7 Notebook PC mwifiex * add quirk to disable deep sleep with certain hardware revision in Surface Book 2 devices iwlwifi * add iwlmei driver for co-operating with Intel's Active Management Technology (AMT) devices * tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits) iwlwifi: mei: fix linking when tracing is not enabled rtlwifi: rtl8192de: Style clean-ups mwl8k: Use named struct for memcpy() region intersil: Use struct_group() for memcpy() region libertas_tf: Use struct_group() for memcpy() region libertas: Use struct_group() for memcpy() region wlcore: no need to initialise statics to false rsi: Fix out-of-bounds read in rsi_read_pkt() rsi: Fix use-after-free in rsi_rx_done_handler() brcmfmac: Configure keep-alive packet on suspend wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup() iwlwifi: mvm: read the rfkill state and feed it to iwlmei iwlwifi: mvm: add vendor commands needed for iwlmei iwlwifi: integrate with iwlmei iwlwifi: mei: add debugfs hooks iwlwifi: mei: add the driver to allow cooperation with CSME mei: bus: add client dma interface mwifiex: Ignore BTCOEX events from the 88W8897 firmware mwifiex: Ensure the version string from the firmware is 0-terminated mwifiex: Add quirk to disable deep sleep with certain hardware revision ... ==================== Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: second round of netdevice refcount tracking The most interesting part of this series is probably ("inet: add net device refcount tracker to struct fib_nh_common") but only future reports will confirm this guess. ==================== Link: https://lore.kernel.org/r/20211207013039.1868645-1-eric.dumazet@gmail.comSigned-off-by: -
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Add a netdevice_tracker inside struct net_device, to track the self reference when a device has an active watchdog timer. Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
- 07 Dec, 2021 10 commits
-
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: New features for MPTCP sockets and netlink PM This collection of patches adds MPTCP socket support for a few socket options, ioctls, and one ancillary data type (specifics for each are listed below). There's also a patch modifying the netlink MPTCP path manager API to allow setting the backup flag on a configured interface using the endpoint ID instead of the full IP address. Patches 1 & 2: TCP_INQ cmsg and selftests. Patches 2 & 3: SIOCINQ, OUTQ, and OUTQNSD ioctls and selftests. Patch 5: Change backup flag using endpoint ID. Patches 6 & 7: IP_TOS socket option and selftests. Patches 8-10: TCP_CORK and TCP_NODELAY socket options. Includes a tcp change to expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use by MPTCP. ==================== Link: https://lore.kernel.org/r/20211203223541.69364-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Maxim Galaganov authored
First, add cork and nodelay fields to the mptcp_sock structure so they can be used in sync_socket_options(), and fill them on setsockopt while holding the msk socket lock. Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk while holding the ssk socket lock. tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending() being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle. Also add getsockopt support for TCP_CORK and TCP_NODELAY. Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Maxim Galaganov <max@internet.ru> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Maxim Galaganov authored
Expose the mptcp_check_and_set_pending() function for use inside MPTCP sockopt code. The next patch will call it when TCP_CORK is cleared or TCP_NODELAY is set on the MPTCP socket in order to push pending data from mptcp_release_cb(). Acked-by:
-
Maxim Galaganov authored
Expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use in MPTCP setsockopt code -- namely for syncing MPTCP socket options with subflows inside sync_socket_options() while already holding the subflow socket lock. Acked-by:
-
Florian Westphal authored
Check that getsockopt(IP_TOS) returns what setsockopt(IP_TOS) did set right before. Also check that socklen_t == 0 and -1 input values match those of normal tcp sockets. Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
earlier patch added IP_TOS setsockopt support, this allows to get the value set by earlier setsockopt. Extends mptcp_put_int_option to handle u8 input/output by adding required cast. Reviewed-by:
-
Davide Caratti authored
a non-zero 'id' is sufficient to identify MPTCP endpoints: allow changing the value of 'backup' bit by simply specifying the endpoint id. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Florian Westphal authored
client & server use a unix socket connection to communicate outside of the mptcp connection. This allows the consumer to know in advance how many bytes have been (or will be) sent by the peer. This allows stricter checks on the bytecounts reported by TCP_INQ cmsg. Suggested-by:
-
Florian Westphal authored
Allows to query in-sequence data ready for read(), total bytes in write queue and total bytes in write queue that have not yet been sent. v2: remove unneeded READ_ONCE() (Paolo Abeni) v3: check for new data unconditionally in SIOCINQ ioctl (Mat Martineau) Signed-off-by:
-
Florian Westphal authored
Do checks on the returned inq counter. Fail on: 1. Huge value (> 1 kbyte, test case files are 1 kb) 2. last hint larger than returned bytes when read was short 3. erronenous indication of EOF. 3) happens when a hint of X bytes reads X-1 on next call but next recvmsg returns more data (instead of EOF). Signed-off-by:
-
