- 27 Jul, 2021 4 commits
-
-
Paolo Bonzini authored
Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect dereference of vmcb->control.reserved_sw before the vmcb is checked for being non-NULL. The compiler is usually sinking the dereference after the check; instead of doing this ourselves in the source, ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called with a non-NULL VMCB. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Vineeth Pillai <viremana@linux.microsoft.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [Untested for now due to issues with my AMD machine. - Paolo]
-
David Matlack authored
This test measures the performance effects of KVM's access tracking. Access tracking is driven by the MMU notifiers test_young, clear_young, and clear_flush_young. These notifiers do not have a direct userspace API, however the clear_young notifier can be triggered by marking a pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages that mechanism to enable access tracking on guest memory. To measure performance this test runs a VM with a configurable number of vCPUs that each touch every page in disjoint regions of memory. Performance is measured in the time it takes all vCPUs to finish touching their predefined region. Example invocation: $ ./access_tracking_perf_test -v 8 Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0xffdfffff000 Populating memory : 1.337752570s Writing to populated memory : 0.010177640s Reading from populated memory : 0.009548239s Mark memory idle : 23.973131748s Writing to idle memory : 0.063584496s Mark memory idle : 24.924652964s Reading from idle memory : 0.062042814s Breaking down the results: * "Populating memory": The time it takes for all vCPUs to perform the first write to every page in their region. * "Writing to populated memory" / "Reading from populated memory": The time it takes for all vCPUs to write and read to every page in their region after it has been populated. This serves as a control for the later results. * "Mark memory idle": The time it takes for every vCPU to mark every page in their region as idle through page_idle. * "Writing to idle memory" / "Reading from idle memory": The time it takes for all vCPUs to write and read to every page in their region after it has been marked idle. This test should be portable across architectures but it is only enabled for x86_64 since that's all I have tested. Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-7-dmatlack@google.com> Signed-off-by:
-
David Matlack authored
There is a missing break statement which causes a fallthrough to the next statement where optarg will be null and a segmentation fault will be generated. Fixes: 9e965bb7 ("KVM: selftests: Add backing src parameter to dirty_log_perf_test") Reviewed-by:
-
Juergen Gross authored
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1 elements. Note that this is currently no real problem, as KVM_MAX_VCPU_ID is an odd number, resulting in always enough padding being available at the end of those arrays. Nevertheless this should be fixed in order to avoid rare problems in case someone is using an even number for KVM_MAX_VCPU_ID. Signed-off-by:
Juergen Gross <jgross@suse.com> Message-Id: <20210701154105.23215-2-jgross@suse.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 26 Jul, 2021 5 commits
-
-
Vitaly Kuznetsov authored
MSR_KVM_ASYNC_PF_ACK MSR is part of interrupt based asynchronous page fault interface and not the original (deprecated) KVM_FEATURE_ASYNC_PF. This is stated in Documentation/virt/kvm/msr.rst. Fixes: 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Oliver Upton <oupton@google.com> Message-Id: <20210722123018.260035-1-vkuznets@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+00a0 (' '): NO-BREAK SPACE as it can cause lines being truncated on PDF output Signed-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Message-Id: <ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org> Signed-off-by:
-
Vitaly Kuznetsov authored
'KVM_CAP_ENFORCE_PV_CPUID' doesn't match the define in include/uapi/linux/kvm.h. Signed-off-by:
-
Vitaly Kuznetsov authored
Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match 'memcpy(dest, src)' to avoid any confusion. No functional change intended. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Vitaly Kuznetsov authored
To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state(). Opportunistically add missing braces to 'else' branch in vmload_vmsave_interception(). No functional change intended. Suggested-by:
-
- 19 Jul, 2021 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.14, take #1 - Fix MTE shared page detection - Fix selftest use of obsolete pthread_yield() in favour of sched_yield() - Enable selftest's use of PMU registers when asked to
-
- 18 Jul, 2021 13 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "A few fixes for issues in the new online shrink code, additional corrections for my recent bug-hunt w.r.t. extent size hints on realtime, and improved input checking of the GROWFSRT ioctl. IOW, the usual 'I somehow got bored during the merge window and resumed auditing the farther reaches of xfs': - Fix shrink eligibility checking when sparse inode clusters enabled - Reset '..' directory entries when unlinking directories to prevent verifier errors if fs is shrinked later - Don't report unusable extent size hints to FSGETXATTR - Don't warn when extent size hints are unusable because the sysadmin configured them that way - Fix insufficient parameter validation in GROWFSRT ioctl - Fix integer overflow when adding rt volumes to filesystem" * tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: detect misaligned rtinherit directory extent size hints xfs: fix an integer overflow error in xfs_growfs_rt xfs: improve FSGROWFSRT precondition checking xfs: don't expose misaligned extszinherit hints to userspace xfs: correct the narrative around misaligned rtinherit/extszinherit dirs xfs: reset child dir '..' entry when unlinking child xfs: check for sparse inode clusters that cross new EOAG when shrinking -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fixes from Darrick Wong: "A handful of bugfixes for the iomap code. There's nothing especially exciting here, just fixes for UBSAN (not KASAN as I erroneously wrote in the tag message) warnings about undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some reshuffling of per-page block state info to fix some problems with gfs2. - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE - Fix assertion errors when using inlinedata files on gfs2" * tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor iomap: Don't create iomap_page objects for inline files iomap: Permit pages without an iop to enter writeback iomap: remove the length variable in iomap_seek_hole iomap: remove the length variable in iomap_seek_data
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Restore the original behavior of scripts/setlocalversion when LOCALVERSION is set to empty. - Show Kconfig prompts even for 'make -s' - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y for older GNU Make versions * tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: Fix intiramfs script name Kbuild: lto: fix module versionings mismatch in GNU make 3.X kbuild: do not suppress Kconfig prompts for silent build scripts/setlocalversion: fix a bug when LOCALVERSION is empty
-
Robert Richter authored
Documentation was not changed when renaming the script in commit 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh"). Fixing this. Basically does: $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh) Fixes: 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh") Signed-off-by:
Robert Richter <rrichter@amd.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Lecopzer Chen authored
When building modules(CONFIG_...=m), I found some of module versions are incorrect and set to 0. This can be found in build log for first clean build which shows WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed, symbol will not be versioned. But in second build(incremental build), the WARNING disappeared and the module version becomes valid CRC and make someone who want to change modules without updating kernel image can't insert their modules. The problematic code is + $(foreach n, $(filter-out FORCE,$^), \ + $(if $(wildcard $(n).symversions), \ + ; cat $(n).symversions >> $@.symversions)) For example: rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \ llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \ fs/notify/notification.o fs/notify/group.o ... `foreach n` shows nothing to `cat` into $(n).symversions because `if $(wildcard $(n).symversions)` return nothing, but actually they do exist during this line was executed. -rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o -rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions The reason is the $(n).symversions are generated at runtime, but Makefile wildcard function expends and checks the file exist or not during parsing the Makefile. Thus fix this by use `test` shell command to check the file existence in runtime. Rebase from both: 1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/] 2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/] Fixes: 38e89184 ("kbuild: lto: fix module versioning") Co-developed-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by:
-
Masahiro Yamada authored
When a new CONFIG option is available, Kbuild shows a prompt to get the user input. $ make [ snip ] Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW) This is the only interactive place in the build process. Commit 174a1dcc ("kbuild: sink stdout from cmd for silent build") suppressed Kconfig prompts as well because syncconfig is invoked by the 'cmd' macro. You cannot notice the fact that Kconfig is waiting for the user input. Use 'kecho' to show the equivalent short log without suppressing stdout from sub-make. Fixes: 174a1dcc ("kbuild: sink stdout from cmd for silent build") Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Mikulas Patocka authored
The commit 042da426 ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426 ("scripts/setlocalversion: simplify the short version part") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Yang Jihong authored
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by:Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Yang Jihong authored
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.comSigned-off-by:
-
Riccardo Mancini authored
When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 14552063 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by:
Riccardo Mancini <rickyman7@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.comSigned-off-by:
-
Riccardo Mancini authored
ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by:
-
- 17 Jul, 2021 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here are the patches for this week that came as the fallout of the merge window: - Two fixes for the NVidia memory controller driver - multiple defconfig files get patched to turn CONFIG_FB back on after that is no longer selected by CONFIG_DRM - ffa and scmpi firmware drivers fixes, mostly addressing compiler and documentation warnings - Platform specific fixes for device tree files on ASpeed, Renesas and NVidia SoC, mostly for recent regressions. - A workaround for a regression on the USB PHY with devlink when the usb-nop-xceiv driver is not available until the rootfs is mounted. - Device tree compiler warnings in Arm Versatile-AB" * tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: dts: versatile: Fix up interrupt controller node names ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in ARM: configs: Update u8500_defconfig ARM: configs: Update Vexpress defconfig ARM: configs: Update Versatile defconfig ARM: configs: Update RealView defconfig ARM: configs: Update Integrator defconfig arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/ firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings ARM: shmobile: defconfig: Restore graphical consoles firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function ... -
Linus Torvalds authored
This reverts commit 78869146. It's not clear why, but it causes unexplained problems in entirely unrelated xfs code. The most likely explanation is some slab corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1]. It ends up having a few other problems too, like build errors on arch/arc, and Geert reporting it using much more memory on m68k [3] (it probably does so elsewhere too, but it is probably just more noticeable on m68k). The architecture issues (both build and memory use) are likely just because this change effectively force-enabled STACKDEPOT (along with a very bad default value for the stackdepot hash size). But together with the xfs issue, this all smells like "this commit was not ready" to me. Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1] Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2] Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3] Reported-by:
Christoph Hellwig <hch@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "One core fix for an oops which can occur if the error handling thread fails to start for some reason and the driver is removed. The other fixes are all minor ones in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req() scsi: mpi3mr: Fix W=1 compilation warnings scsi: pm8001: Clean up kernel-doc and comments scsi: zfcp: Report port fc_security as unknown early during remote cable pull scsi: core: Fix bad pointer dereference when ehandler kthread is invalid scsi: fas216: Fix a build error scsi: core: Fix the documentation of the scsi_execute() time parameter
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Eight cifs/smb3 fixes, including three for stable. Three are DFS related fixes, and two to fix problems pointed out by static checkers" * tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: do not share tcp sessions of dfs connections SMB3.1.1: fix mount failure to some servers when compression enabled cifs: added WARN_ON for all the count decrements cifs: fix missing null session check in mount cifs: handle reconnect of tcon when there is no cached dfs referral cifs: fix the out of range assignment to bit fields in parse_server_interfaces cifs: Do not use the original cruid when following DFS links for multiuser mounts cifs: use the expiry output of dns_query to schedule next resolution
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "Fixes to kunit tool and documentation: - fix asserts on older python versions - fixes to misleading error messages when TAP header format is incorrect or when file is missing - documentation fix: drop obsolete information about uml_abort coverage - remove unnecessary annotations" * tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Assert the version requirement kunit: tool: remove unnecessary "annotations" import Documentation: kunit: drop obsolete note about uml_abort for coverage kunit: tool: Fix error messages for cases of no tests and wrong TAP header
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "A fix to memory-hotplug hot-remove test to stop spamming logs with dump_page() entries and slowing the system down to a crawl" * tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Fix the histogram logic from possibly crashing the kernel Working on the histogram code, I found that if you dereference a char pointer in a trace event that happens to point to user space, it can crash the kernel, as it does no checks of that pointer. I have code coming that will do this better, so just remove this ability to treat character pointers in trace events as stings in the histogram" * tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not reference char * as a string in histograms
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Drop 'resets' as required on renesas,du - Moving of fixed string patterns for 'properties' instead of 'patternProperties' - Drop more redundant minItems/maxItems that we merged in the merge window - Indentation warning fix for sja1105 * tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: renesas,du: Make resets optional on R-Car H1 dt-bindings: Move fixed string 'patternProperties' to 'properties' dt-bindings: More dropping redundant minItems/maxItems dt-bindings: net: dsa: sja1105: Fix indentation warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "The bulk of the diffstat consists of changes to our uaccess routines so that they fall back to bytewise copying prior to reporting complete failure when the initial (multi-byte) access faults. However, the most disappointing change here is that we've had to bump ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU, which ended up in the MSM8996 mobile SoC. Still, at least we're now aware of this design and one of the hardware designers confirmed the L2 cacheline size for us. Summary: - Fix instrumentation annotations for entry code - Ensure kernel MTE state is restored correctly on resume from suspend - Fix MTE fault from new strlen() routine - Fallback to byte-wise accesses on initial uaccess fault - Bump Clang requirement for BTI - Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry: fix KCOV suppression arm64: entry: add missing noinstr arm64: mte: fix restoration of GCR_EL1 from suspend arm64: Avoid premature usercopy failure arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)" arm64: Add missing header <asm/smp.h> in two files arm64: fix strlen() with CONFIG_KASAN_HW_TAGS
-
- 16 Jul, 2021 8 commits
-
-
Sudeep Holla authored
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: 'clear-mask' does not match any of the regexes Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Also drop invalid clear-mask property. Signed-off-by:Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com' Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes ASPEED device tree fixes for 5.14 - eMMC phase corrections so Tacoma and Everest can boot - VUART irq polarity fix for e3c246d4i, using new bindings - I2C address fix for Rainier power supply - GPIO line name fixes * tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: PSU #3 address change ARM: dts: everest: Add phase corrections for eMMC ARM: dts: tacoma: Add phase corrections for eMMC ARM: dts: aspeed: Update e3c246d4i vuart properties ARM: dts: aspeed: Fix AST2600 machines line names Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.comSigned-off-by:
-
Stefan Wahren authored
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has been a "regression source" a lot of times. The last case is breakage of USB mass storage boot has been commit e5904747 ("driver core: Set fw_devlink=on by default") for multi_v7_defconfig. As long as NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing endlessly and prevent booting from USB mass storage device. So make the driver built-in as in bcm2835_defconfig and arm64/defconfig. Fixes: e5904747 ("driver core: Set fw_devlink=on by default") Reported-by:
Ojaswin Mujoo <ojaswin98@gmail.com> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com' Signed-off-by:
-
Linus Walleij authored
The platform lost the framebuffer due to a commit solving a circular dependency in v5.14-rc1, so add it back in by explicitly selecting the framebuffer. The U8500 has also gained a few systems using touchscreens from Cypress, Melfas and Zinitix so add these at the same time as we're updating the defconfig anyway. Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by:
-
Linus Walleij authored
This updates the Versatile Express defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - CONFIG_CMA options were moved around. - CONFIG_MODULES options were moved around. - CONFIG_CRYPTO_HW was moved around. Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by:
-
Linus Walleij authored
This updates the Versatile defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - The CONFIG_FB_MODE_HELPERS are not needed when using DRM framebuffer emulation as DRM does. - The Acorn fonts are removed, the default framebuffer font works fine. I don't know why this was selected in the first place or how the Kconfig was altered so it was removed. Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org' Signed-off-by:
-
Linus Walleij authored
This updates the RealView defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - The CONFIG_FB_MODE_HELPERS are not needed when using DRM framebuffer emulation as DRM does. - Drop two unused penguin logos. Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by:
-
Linus Walleij authored
This updates the Integrator defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - Drop the unused Matrox FB drivers that are only used with specific PCI cards. Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by:
-
