- 18 Dec, 2023 1 commit
-
-
Johannes Berg authored
On older devices (before unified image!) we can end up calling stop_device from an rfkill interrupt. However, in stop_device we attempt to synchronize IRQs, which then of course deadlocks. Avoid this by checking the context, if running from the IRQ thread then don't synchronize. This wouldn't be correct on a new device since RSS is supported, but older devices only have a single interrupt/queue. Fixes: 37fb29bd ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI") Reviewed-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
-
- 14 Dec, 2023 1 commit
-
-
Johannes Berg authored
The file for the new certificate (Chen-Yu Tsai's) didn't end with a comma, so depending on the file order in the build rule, we'd end up with invalid C when concatenating the (now two) certificates. Fix that. Cc: stable@vger.kernel.org Reported-by:
Biju Das <biju.das.jz@bp.renesas.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: fb768d3b ("wifi: cfg80211: Add my certificate") Signed-off-by:
-
- 12 Dec, 2023 11 commits
-
-
Felix Fietkau authored
If WED rx is enabled, rx buffers are added to a buffer pool that can be filled from multiple page pools. Because buffers freed from rx poll are not guaranteed to belong to the processed queue's page pool, lockless caching must not be used in this case. Cc: stable@vger.kernel.org Fixes: 2f5c3c77 ("wifi: mt76: switch to page_pool allocator") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Avraham Stern authored
It possible that while the rx rb is being handled, the transport has been stopped and re-started. In this case the tx queue pointer is not yet initialized, which will lead to a NULL pointer dereference. Fix it. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Johannes Berg authored
During refactoring the "else" here got lost, add it back. Fixes: c99a89ed ("mac80211: factor out plink event gathering") Signed-off-by:
-
Johannes Berg authored
ieee802_11_parse_elems() can return NULL, so we must check for the return value. Fixes: 5d24828d ("mac80211: always allocate struct ieee802_11_elems") Signed-off-by:
-
Johannes Berg authored
We need to check that cfg80211_defragment_element() didn't return an error, since it can fail due to bad input, and we didn't catch that before. Fixes: 8eb8dd2f ("wifi: mac80211: Support link removal using Reconfiguration ML element") Signed-off-by:
-
Johannes Berg authored
If we're doing reconfig, then we cannot add the debugfs files that are already there from before the reconfig. Skip that in drv_change_sta_links() during reconfig. Fixes: d2caad52 ("wifi: mac80211: add API to show the link STAs in debugfs") Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Reviewed-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
-
Rouven Czerwinski authored
Fix the undefined usage of the GPIO consumer API after retrieving the GPIO description with GPIO_ASIS. The API documentation mentions that GPIO_ASIS won't set a GPIO direction and requires the user to set a direction before using the GPIO. This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer able to enabled/disable a device, presumably because the GPIO controller was never configured for the output direction. Fixes: b2f750c3 ("net: rfkill: gpio: prevent value glitch during probe") Cc: stable@vger.kernel.org Signed-off-by:
Rouven Czerwinski <r.czerwinski@pengutronix.de> Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.deSigned-off-by:
-
Edward Adam Davis authored
[Syz report] WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48 Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3 RSP: 0018:ffffc90003c57248 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888016bc4000 RCX: ffffffff89f7d519 RDX: ffff888076d43b80 RSI: ffffffff89f7d6df RDI: 0000000000000005 RBP: ffff88801daaae20 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: ffff888020030e20 R15: ffff888078f08000 FS: 0000555556b94380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005fdeb8 CR3: 0000000076d22000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674 sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002 ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068 rdev_add_station net/wireless/rdev-ops.h:201 [inline] nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b [Analysis] It is inappropriate to make a link configuration change judgment on an non-existent and non new link. [Fix] Quickly exit when there is a existent link and the link configuration has not changed. Fixes: b303835d ("wifi: mac80211: accept STA changes without link changes") Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com Signed-off-by:
Edward Adam Davis <eadavis@qq.com> Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.comSigned-off-by:
-
Chen-Yu Tsai authored
As announced [1][2], I have taken over maintainership of the wireless-regdb project. Add my certificate so that newer releases are valid to the kernel. Seth's certificate should be kept around for awhile, at least until a few new releases by me happen. This should also be applied to stable trees so that stable kernels can utilize newly released database binaries. [1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/ [2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/ Cc: stable@vger.kernel.org Signed-off-by:
Chen-Yu Tsai <wens@kernel.org> Acked-by:
Seth Forshee <sforshee@kernel.org> Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.twSigned-off-by:
-
Johannes Berg authored
Evidently I had only looked at all the ones in rx.c, and missed this. Add bh-disable to this use of the rxq->lock as well. Fixes: 25edc8f2 ("iwlwifi: pcie: properly implement NAPI") Reported-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Johannes Berg authored
For vendor action frames, whether a protected one should be used or not is clearly up to the individual vendor and frame, so even though a protected dual is defined, it may not get used. Thus, don't require protection for vendor action frames when they're used in a connection. Since we obviously don't process frames unknown to the kernel in the kernel, it may makes sense to invert this list to have all the ones the kernel processes and knows to be requiring protection, but that'd be a different change. Fixes: 91535613 ("wifi: mac80211: don't drop all unprotected public action frames") Reported-by:
Jouni Malinen <j@w1.fi> Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeidSigned-off-by:
-
- 30 Nov, 2023 4 commits
-
-
Jiawen Wu authored
Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the calling of pci_msix_shutdown(), wx->msix_entries is never freed. Reordering the lines to fix the memory leak. Cc: stable@vger.kernel.org Fixes: 3f703186 ("net: libwx: Add irq flow functions") Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Dave Ertman authored
There is an error when an interface has the following conditions: - PF is in an aggregate (bond) - PF has VFs created on it - bond is in a state where it is failed-over to the secondary interface - A VF reset is issued on one or more of those VFs The issue is generated by the originating PF trying to rebuild or reconfigure the VF resources. Since the bond is failed over to the secondary interface the queue contexts are in a modified state. To fix this issue, have the originating interface reclaim its resources prior to the tear-down and rebuild or reconfigure. Then after the process is complete, move the resources back to the currently active interface. There are multiple paths that can be used depending on what triggered the event, so create a helper function to move the queues and use paired calls to the helper (back to origin, process, then move back to active interface) under the same lag_mutex lock. Fixes: 1e0f9881 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== wireless fixes: - debugfs had a deadlock (removal vs. use of files), fixes going through wireless ACKed by Greg - support for HT STAs on 320 MHz channels, even if it's not clear that should ever happen (that's 6 GHz), best not to WARN() - fix for the previous CQM fix that broke most cases - various wiphy locking fixes - various small driver fixes * tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: use wiphy locked debugfs for sdata/link wifi: mac80211: use wiphy locked debugfs helpers for agg_status wifi: cfg80211: add locked debugfs wrappers debugfs: add API to allow debugfs operations cancellation debugfs: annotate debugfs handlers vs. removal with lockdep debugfs: fix automount d_fsdata usage wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap wifi: avoid offset calculation on NULL pointer wifi: cfg80211: hold wiphy mutex for send_interface wifi: cfg80211: lock wiphy mutex for rfkill poll wifi: cfg80211: fix CQM for non-range use wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta() wifi: mt76: mt7925: fix typo in mt7925_init_he_caps wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config ==================== Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.netSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-11-30 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 10 files changed, 66 insertions(+), 15 deletions(-). The main changes are: 1) Fix AF_UNIX splat from use after free in BPF sockmap, from John Fastabend. 2) Fix a syzkaller splat in netdevsim by properly handling offloaded programs (and not device-bound ones), from Stanislav Fomichev. 3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint, from Hou Tao. 4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink, from Daniel Borkmann. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags() netdevsim: Don't accept device bound programs ==================== Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.netSigned-off-by:
-
- 29 Nov, 2023 5 commits
-
-
John Fastabend authored
This adds a test where both pairs of a af_unix paired socket are put into a BPF map. This ensures that when we tear down the af_unix pair we don't have any issues on sockmap side with ordering and reference counting. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com
-
John Fastabend authored
AF_UNIX stream sockets are a paired socket. So sending on one of the pairs will lookup the paired socket as part of the send operation. It is possible however to put just one of the pairs in a BPF map. This currently increments the refcnt on the sock in the sockmap to ensure it is not free'd by the stack before sockmap cleans up its state and stops any skbs being sent/recv'd to that socket. But we missed a case. If the peer socket is closed it will be free'd by the stack. However, the paired socket can still be referenced from BPF sockmap side because we hold a reference there. Then if we are sending traffic through BPF sockmap to that socket it will try to dereference the free'd pair in its send logic creating a use after free. And following splat: [59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0 [59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954 [...] [59.905468] Call Trace: [59.905787] <TASK> [59.906066] dump_stack_lvl+0x130/0x1d0 [59.908877] print_report+0x16f/0x740 [59.910629] kasan_report+0x118/0x160 [59.912576] sk_wake_async+0x31/0x1b0 [59.913554] sock_def_readable+0x156/0x2a0 [59.914060] unix_stream_sendmsg+0x3f9/0x12a0 [59.916398] sock_sendmsg+0x20e/0x250 [59.916854] skb_send_sock+0x236/0xac0 [59.920527] sk_psock_backlog+0x287/0xaa0 To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The primarily problem with keeping this logic in bpf_unix was: In the sock close() we could handle the deref by having a close handler. But, when we are destroying the psock through a map delete operation we wouldn't have gotten any signal thorugh the proto struct other than it being replaced. If we do the deref from the proto replace its too early because we need to deref the sk_pair after the backlog worker has been stopped. Given all this it seems best to just cache it at the end of the psock and eat 8B for the af_unix and vsock users. Notice dgram sockets are OK because they handle locking already. Fixes: 94531cfc ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by:
-
Jakub Kicinski authored
struct ynl_req_state carries reply-related info from generated code into generic YNL code. While we don't need reply info to execute a request without a reply, we still need to pass in the struct, because it's also where we get the pointer to struct ynl_sock from. Passing NULL results in crashes if kernel returns an error or an unexpected reply. Fixes: dc0956c9 ("tools: ynl-gen: move the response reading logic into YNL") Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
The default dump handler needs to clear ret before returning. Otherwise if the last interface returns an inconsequential error this error will propagate to user space. This may confuse user space (ethtool CLI seems to ignore it, but YNL doesn't). It will also terminate the dump early for mutli-skb dump, because netlink core treats EOPNOTSUPP as a real error. Fixes: 728480f1 ("ethtool: default handlers for GET requests") Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.orgSigned-off-by:
-
Yoshihiro Shimoda authored
Fix races between ravb_tx_timeout_work() and functions of net_device_ops and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that since ravb_close() is under the rtnl lock and calls cancel_work_sync(), ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock may happen in ravb_tx_timeout_work() like below: CPU0 CPU1 ravb_tx_timeout() schedule_work() ... __dev_close_many() // Under rtnl lock ravb_close() cancel_work_sync() // Waiting ravb_tx_timeout_work() rtnl_lock() // This is possible to cause a deadlock If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
- 28 Nov, 2023 13 commits
-
-
Heiner Kallweit authored
ndo_stop() is RTNL-protected by net core, and the worker function takes RTNL as well. Therefore we will deadlock when trying to execute a pending work synchronously. To fix this execute any pending work asynchronously. This will do no harm because netif_running() is false in ndo_stop(), and therefore the work function is effectively a no-op. However we have to ensure that no task is running or pending after rtl_remove_one(), therefore add a call to cancel_work_sync(). Fixes: abe5fc42 ("r8169: use RTNL to protect critical sections") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Heiner Kallweit authored
The original change results in a deadlock if jumbo mtu mode is used. Reason is that the phydev lock is held when rtl_reset_work() is called here, and rtl_jumbo_config() calls phy_start_aneg() which also tries to acquire the phydev lock. Fix this by calling rtl_reset_work() asynchronously. Fixes: 621735f5 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by:
Ian Chen <free122448@hotmail.com> Tested-by:
-
Gustavo A. R. Silva authored
Previously, one-element and zero-length arrays were treated as true flexible arrays, even though they are actually "fake" flex arrays. The __randomize_layout would leave them untouched at the end of the struct, similarly to proper C99 flex-array members. However, this approach changed with commit 1ee60356 ("gcc-plugins: randstruct: Only warn about true flexible arrays"). Now, only C99 flexible-array members will remain untouched at the end of the struct, while one-element and zero-length arrays will be subject to randomization. Fix a `__randomize_layout` crash in `struct neighbour` by transforming zero-length array `primary_key` into a proper C99 flexible-array member. Fixes: 1ee60356 ("gcc-plugins: randstruct: Only warn about true flexible arrays") Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
Joey Gouly <joey.gouly@arm.com> Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@workSigned-off-by:
-
Subbaraya Sundeep authored
TC ingress policer rules depends on interface receive queue contexts since the bandwidth profiles are attached to RQ contexts. When an interface is brought down all the queue contexts are freed. This in turn frees bandwidth profiles in hardware causing ingress police rules non-functional after the interface is brought up. Fix this by applying all the ingress police rules config to hardware in otx2_open. Also allow adding ingress rules only when interface is running since no contexts exist for the interface when it is down. Fixes: 68fbff68 ("octeontx2-pf: Add police action for TC flower") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.comSigned-off-by:
-
Geetha sowjanya authored
When more than 64 VFs are enabled for a PF then mbox communication between VF and PF is not working as mbox work queueing for few VFs are skipped due to wrong calculation of VF numbers. Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
-
Furong Xu authored
Commit aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts by default") tries to disable MMC interrupts to avoid a storm of unhandled interrupts, but leaves the FPE(Frame Preemption) MMC interrupts enabled, FPE MMC interrupts can cause the same problem. Now we mask FPE TX and RX interrupts to disable all MMC interrupts. Fixes: aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts by default") Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
Furong Xu <0x1207@gmail.com> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.comSigned-off-by:
-
Elena Salomatkina authored
A loop in rvu_mbox_handler_nix_bandprof_free() contains a break if (idx == MAX_BANDPROF_PER_PFFUNC), but if idx may reach MAX_BANDPROF_PER_PFFUNC buffer '(*req->prof_idx)[layer]' overflow happens before that check. The patch moves the break to the beginning of the loop. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8e095b3 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by:
Elena Salomatkina <elena.salomatkina.cmc@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Willem de Bruijn says: ==================== selftests/net: fix a few small compiler warnings Observed a clang warning when backporting cmsg_sender. Ran the same build against all the .c files under selftests/net. This is clang-14 with -Wall Which is what tools/testing/selftests/net/Makefile also enables. ==================== Link: https://lore.kernel.org/r/20231124171645.1011043-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Same init_rng() in both tests. The function reads /dev/urandom to initialize srand(). In case of failure, it falls back onto the entropy in the uninitialized variable. Not sure if this is on purpose. But failure reading urandom should be rare, so just fail hard. While at it, convert to getrandom(). Which man 4 random suggests is simpler and more robust. mptcp_inq.c:525:6: mptcp_connect.c:1131:6: error: variable 'foo' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Fixes: b5188056 ("selftests: mptcp: add inq test case") Cc: Florian Westphal <fw@strlen.de> Signed-off-by:Willem de Bruijn <willemb@google.com> ---- When input is randomized because this is expected to meaningfully explore edge cases, should we also add 1. logging the random seed to stdout and 2. adding a command line argument to replay from a specific seed I can do this in net-next, if authors find it useful in this case. Reviewed-by:
Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Remove an unused variable. diag_uid.c:151:24: error: unused variable 'udr' [-Werror,-Wunused-variable] Fixes: ac011361 ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Signed-off-by: -
Willem de Bruijn authored
Signedness of char is signed on x86_64, but unsigned on arm64. Fix the warning building cmsg_sender.c on signed platforms or forced with -fsigned-char: msg_sender.c:455:12: error: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion] buf[0] = ICMPV6_ECHO_REQUEST; constant ICMPV6_ECHO_REQUEST is 128. Link: https://lwn.net/Articles/911914 Fixes: de17e305 ("selftests: net: cmsg_sender: support icmp and raw sockets") Signed-off-by: -
Willem de Bruijn authored
Fix a small compiler warning. nr_process must be a signed long: it is assigned a signed long by strtol() and is compared against LONG_MIN and LONG_MAX. ipsec.c:2280:65: error: result of comparison of constant -9223372036854775808 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN)) Fixes: bc2652b7 ("selftest/net/xfrm: Add test for ipsec tunnel") Signed-off-by:Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Daniel Borkmann authored
The IFLA_NETKIT_PEER_INFO attribute can only be used during device creation, but not via changelink callback. Hence reject it there. Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
- 27 Nov, 2023 5 commits
-
-
Johannes Berg authored
The debugfs files for netdevs (sdata) and links are removed with the wiphy mutex held, which may deadlock. Use the new wiphy locked debugfs to avoid that. Signed-off-by: -
Johannes Berg authored
The read is currently with RCU and the write can deadlock, convert both for the sake of illustration. Make mac80211 depend on cfg80211 debugfs to get the helpers, but mac80211 debugfs without it does nothing anyway. This also required some adjustments in ath9k. Signed-off-by: -
Johannes Berg authored
Add wrappers for debugfs files that should be called with the wiphy mutex held, while the file is also to be removed under the wiphy mutex. This could otherwise deadlock when a file is trying to acquire the wiphy mutex while the code removing it holds the mutex but waits for the removal. This actually works by pushing the execution of the read or write handler to a wiphy work that can be cancelled using the debugfs cancellation API. Signed-off-by: -
Johannes Berg authored
In some cases there might be longer-running hardware accesses in debugfs files, or attempts to acquire locks, and we want to still be able to quickly remove the files. Introduce a cancellations API to use inside the debugfs handler functions to be able to cancel such operations on a per-file basis. Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johannes Berg authored
When you take a lock in a debugfs handler but also try to remove the debugfs file under that lock, things can deadlock since the removal has to wait for all users to finish. Add lockdep annotations in debugfs_file_get()/_put() to catch such issues. Acked-by:
-
