- 08 Jan, 2022 4 commits
-
-
J. Bruce Fields authored
NFSv4.1 supports an optional lock notification feature which notifies the client when a lock comes available. (Normally NFSv4 clients just poll for locks if necessary.) To make that work, we need to request a blocking lock from the filesystem. We turned that off for NFS in commit f657f8ee ("nfs: don't atempt blocking locks on nfs reexports") [sic] because it actually blocks the nfsd thread while waiting for the lock. Thanks to Vasily Averin for pointing out that NFS isn't the only filesystem with that problem. Any filesystem that leaves ->lock NULL will use posix_lock_file(), which does the right thing. Simplest is just to assume that any filesystem that defines its own ->lock is not safe to request a blocking lock from. So, this patch mostly reverts commit f657f8ee ("nfs: don't atempt blocking locks on nfs reexports") [sic] and commit b840be2f ("lockd: don't attempt blocking locks on nfs reexports"), and instead uses a check of ->lock (Vasily's suggestion) to decide whether to support blocking lock notifications on a given filesystem. Also add a little documentation. Perhaps someday we could add back an export flag later to allow filesystems with "good" ->lock methods to support blocking lock notifications. Reported-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [ cel: Description rewritten to address checkpatch nits ] [ cel: Fixed warning when SUNRPC debugging is disabled ] [ cel: Fixed NULL check ] Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
-
Chuck Lever authored
Clean up. Trond points out that xdr_stream_decode_uint32_array() does the same thing as nfsd4_decode_bitmap4(). Suggested-by:
Trond Myklebust <trondmy@hammerspace.com> Signed-off-by:
-
J. Bruce Fields authored
The use of the bitmaps is confusing. Add a cross-reference to make it easier to find the existing comment. Add an updated reference with URL to make it quicker to look up. And a bit more editorializing about the value of this. Signed-off-by:
-
Chuck Lever authored
Clean up: The garbage_args and cant_encode tracepoints report the same information as each other, so combine them into a single tracepoint class to reduce code duplication and slightly reduce the size of trace.o. Signed-off-by:
-
- 13 Dec, 2021 25 commits
-
-
Chuck Lever authored
I'm about to add more information to the server-side SUNRPC tracepoints, so I'm going to offset the increased trace log consumption by getting rid of some tracepoints that fire frequently but don't offer much value. trace_svc_xprt_received() was useful for debugging, perhaps, but is not generally informative. trace_svc_handle_xprt() reports largely the same information as trace_svc_xdr_recvfrom(). As a clean-up, rename trace_svc_xprt_do_enqueue() to match svc_xprt_dequeue(). Signed-off-by: -
NeilBrown authored
We currently have a 'laundrette' for closing cached files - a different work-item for each network-namespace. These 'laundrettes' (aka struct nfsd_fcache_disposal) are currently on a list, and are freed using rcu. The list is not necessary as we have a per-namespace structure (struct nfsd_net) which can hold a link to the nfsd_fcache_disposal. The use of kfree_rcu is also unnecessary as the cache is cleaned of all files associated with a given namespace, and no new files can be added, before the nfsd_fcache_disposal is freed. So add a '->fcache_disposal' link to nfsd_net, and discard the list management and rcu usage. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Jiapeng Chong authored
Eliminate the follow smatch warning: fs/nfsd/nfs4xdr.c:4766 nfsd4_encode_read_plus_hole() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Chuck Lever authored
Commit 7142b98d ("nfsd: Clean up drc cache in preparation for global spinlock elimination"), billed as a clean-up, added be32_to_cpu() to the DRC hash function without explanation. That commit removed two comments that state that byte-swapping in the hash function is unnecessary without explaining whether there was a need for that change. On some Intel CPUs, the swab32 instruction is known to cause a CPU pipeline stall. be32_to_cpu() does not add extra randomness, since the hash multiplication is done /before/ shifting to the high-order bits of the result. As a micro-optimization, remove the unnecessary transform from the DRC hash function. Signed-off-by:
-
NeilBrown authored
Now that thread management is consistent there is no need for nfs-callback to use svc_create_pooled() as introduced in Commit df807fff ("NFSv4.x/callback: Create the callback service through svc_create_pooled"). So switch back to svc_create(). If service pools were configured, but the number of threads were left at '1', nfs callback may not work reliably when svc_create_pooled() is used. Signed-off-by:
-
NeilBrown authored
svc_set_num_threads() does everything that lockd_start_svc() does, except set sv_maxconn. It also (when passed 0) finds the threads and stops them with kthread_stop(). So move the setting for sv_maxconn, and use svc_set_num_thread() We now don't need nlmsvc_task. Now that we use svc_set_num_threads() it makes sense to set svo_module. This request that the thread exists with module_put_and_exit(). Also fix the documentation for svo_module to make this explicit. svc_prepare_thread is now only used where it is defined, so it can be made static. Signed-off-by:
-
NeilBrown authored
Currently 'pooled' services hold a reference on the pool_map, and 'unpooled' services do not. svc_destroy() uses the presence of ->svo_function (via svc_serv_is_pooled()) to determine if the reference should be dropped. There is no direct correlation between being pooled and the use of svo_function, though in practice, lockd is the only non-pooled service, and the only one not to use svo_function. This is untidy and would cause problems if we changed lockd to use svc_set_num_threads(), which requires the use of ->svo_function. So change the test for "is the service pooled" to "is sv_nrpools > 1". This means that when svc_pool_map_get() returns 1, it must NOT take a reference to the pool. We discard svc_serv_is_pooled(), and test sv_nrpools directly. Signed-off-by:
-
NeilBrown authored
These definitions are not used outside of svc.c, and there is no evidence that they ever have been. So move them into svc.c and make the declarations 'static'. Signed-off-by:
-
NeilBrown authored
lockd_create_svc() already does an svc_get() if the service already exists, so it is more like a "get" than a "create". So: - Move the increment of nlmsvc_users into the function as well - rename to lockd_get(). It is now the inverse of lockd_put(). Signed-off-by:
-
NeilBrown authored
There is some cleanup that is duplicated in lockd_down() and the failure path of lockd_up(). Factor these out into a new lockd_put() and call it from both places. lockd_put() does *not* take the mutex - that must be held by the caller. It decrements nlmsvc_users and if that reaches zero, it cleans up. Signed-off-by:
-
NeilBrown authored
The normal place to call svc_exit_thread() is from the thread itself just before it exists. Do this for lockd. This means that nlmsvc_rqst is not used out side of lockd_start_svc(), so it can be made local to that function, and renamed to 'rqst'. Signed-off-by:
-
NeilBrown authored
lockd_start_svc() only needs to be called once, just after the svc is created. If the start fails, the svc is discarded too. It thus makes sense to call lockd_start_svc() from lockd_create_svc(). This allows us to remove the test against nlmsvc_rqst at the start of lockd_start_svc() - it must always be NULL. lockd_up() only held an extra reference on the svc until a thread was created - then it dropped it. The thread - and thus the extra reference - will remain until kthread_stop() is called. Now that the thread is created in lockd_create_svc(), the extra reference can be dropped there. So the 'serv' variable is no longer needed in lockd_up(). Signed-off-by:
-
NeilBrown authored
Now that the network status notifiers use nlmsvc_serv rather then nlmsvc_rqst the management can be simplified. Notifier unregistration synchronises with any pending notifications so providing we unregister before nlm_serv is freed no further interlock is required. So we move the unregister call to just before the thread is killed (which destroys the service) and just before the service is destroyed in the failure-path of lockd_up(). Then nlm_ntf_refcnt and nlm_ntf_wq can be removed. Signed-off-by:
-
NeilBrown authored
lockd has two globals - nlmsvc_task and nlmsvc_rqst - but mostly it wants the 'struct svc_serv', and when it doesn't want it exactly it can get to what it wants from the serv. This patch is a first step to removing nlmsvc_task and nlmsvc_rqst. It introduces nlmsvc_serv to store the 'struct svc_serv*'. This is set as soon as the serv is created, and cleared only when it is destroyed. Signed-off-by:
-
NeilBrown authored
nfsd currently maintains an open-coded read/write semaphore (refcount and wait queue) for each network namespace to ensure the nfs service isn't shut down while the notifier is running. This is excessive. As there is unlikely to be contention between notifiers and they run without sleeping, a single spinlock is sufficient to avoid problems. Signed-off-by:
-
NeilBrown authored
The ->svo_setup callback serves no purpose. It is always called from within the same module that chooses which callback is needed. So discard it and call the relevant function directly. Now that svc_set_num_threads() is no longer used remove it and rename svc_set_num_threads_sync() to remove the "_sync" suffix. Signed-off-by:
-
NeilBrown authored
nfsd cannot currently use svc_set_num_threads_sync. It instead uses svc_set_num_threads which does *not* wait for threads to all exit, and has a separate mechanism (nfsd_shutdown_complete) to wait for completion. The reason that nfsd is unlike other services is that nfsd threads can exit separately from svc_set_num_threads being called - they die on receipt of SIGKILL. Also, when the last thread exits, the service must be shut down (sockets closed). For this, the nfsd_mutex needs to be taken, and as that mutex needs to be held while svc_set_num_threads is called, the one cannot wait for the other. This patch changes the nfsd thread so that it can drop the ref on the service without blocking on nfsd_mutex, so that svc_set_num_threads_sync can be used: - if it can drop a non-last reference, it does that. This does not trigger shutdown and does not require a mutex. This will likely happen for all but the last thread signalled, and for all threads being shut down by nfsd_shutdown_threads() - if it can get the mutex without blocking (trylock), it does that and then drops the reference. This will likely happen for the last thread killed by SIGKILL - Otherwise there might be an unrelated task holding the mutex, possibly in another network namespace, or nfsd_shutdown_threads() might be just about to get a reference on the service, after which we can drop ours safely. We cannot conveniently get wakeup notifications on these events, and we are unlikely to need to, so we sleep briefly and check again. With this we can discard nfsd_shutdown_complete and nfsd_complete_shutdown(), and switch to svc_set_num_threads_sync. Signed-off-by:
-
NeilBrown authored
There is nothing happening in the start of nfsd() that requires protection by the mutex, so don't take it until shutting down the thread - which does still require protection - but only for nfsd_put(). Signed-off-by:
-
NeilBrown authored
Using sv_lock means we don't need to hold the service mutex over these updates. In particular, svc_exit_thread() no longer requires synchronisation, so threads can exit asynchronously. Note that we could use an atomic_t, but as there are many more read sites than writes, that would add unnecessary noise to the code. Some reads are already racy, and there is no need for them to not be. Signed-off-by:
-
NeilBrown authored
This allows us to move the updates for th_cnt out of the mutex. This is a step towards reducing mutex coverage in nfsd(). Signed-off-by:
-
NeilBrown authored
The use of sv_nrthreads as a general refcount results in clumsy code, as is seen by various comments needed to explain the situation. This patch introduces a 'struct kref' and uses that for reference counting, leaving sv_nrthreads to be a pure count of threads. The kref is managed particularly in svc_get() and svc_put(), and also nfsd_put(); svc_destroy() now takes a pointer to the embedded kref, rather than to the serv. nfsd allows the svc_serv to exist with ->sv_nrhtreads being zero. This happens when a transport is created before the first thread is started. To support this, a 'keep_active' flag is introduced which holds a ref on the svc_serv. This is set when any listening socket is successfully added (unless there are running threads), and cleared when the number of threads is set. So when the last thread exits, the nfs_serv will be destroyed. The use of 'keep_active' replaces previous code which checked if there were any permanent sockets. We no longer clear ->rq_server when nfsd() exits. This was done to prevent svc_exit_thread() from calling svc_destroy(). Instead we take an extra reference to the svc_serv to prevent svc_destroy() from being called. Signed-off-by:
-
NeilBrown authored
svc_destroy() is poorly named - it doesn't necessarily destroy the svc, it might just reduce the ref count. nfsd_destroy() is poorly named for the same reason. This patch: - removes the refcount functionality from svc_destroy(), moving it to a new svc_put(). Almost all previous callers of svc_destroy() now call svc_put(). - renames nfsd_destroy() to nfsd_put() and improves the code, using the new svc_destroy() rather than svc_put() - removes a few comments that explain the important for balanced get/put calls. This should be obvious. The only non-trivial part of this is that svc_destroy() would call svc_sock_update() on a non-final decrement. It can no longer do that, and svc_put() isn't really a good place of it. This call is now made from svc_exit_thread() which seems like a good place. This makes the call *before* sv_nrthreads is decremented rather than after. This is not particularly important as the call just sets a flag which causes sv_nrthreads set be checked later. A subsequent patch will improve the ordering. Signed-off-by:
-
NeilBrown authored
It is common for 'get' functions to return the object that was 'got', and there are a couple of places where users of svc_get() would be a little simpler if svc_get() did that. Make it so. Signed-off-by:
-
NeilBrown authored
If write_ports_add() fails, we shouldn't destroy the serv, unless we had only just created it. So if there are any permanent sockets already attached, leave the serv in place. Signed-off-by:
-
Chuck Lever authored
/home/cel/src/linux/linux/fs/nfsd/nfs4proc.c:1539:24: warning: incorrect type in assignment (different base types) /home/cel/src/linux/linux/fs/nfsd/nfs4proc.c:1539:24: expected restricted __be32 [usertype] status /home/cel/src/linux/linux/fs/nfsd/nfs4proc.c:1539:24: got int Signed-off-by:
-
- 12 Dec, 2021 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.16-rc5. They include: - gadget driver fixes for reported issues - xhci fixes for reported problems. - config endpoint parsing fixes for where we got bitfields wrong Most of these have been in linux-next, the remaining few were not, but got lots of local testing in my systems and in some cloud testing infrastructures" * tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: config: using bit mask instead of individual bits usb: core: config: fix validation of wMaxPacketValue entries USB: gadget: zero allocate endpoint 0 buffers USB: gadget: detect too-big endpoint 0 requests xhci: avoid race between disable slot command and host runtime suspend xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a bunch of small char/misc and other driver subsystem fixes. Included in here are: - iio driver fixes for reported problems - phy driver fixes for a number of reported problems - mhi resume bugfix for broken hardware - nvmem driver fix - rtsx driver fix for irq issues - fastrpc packet parsing fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) bus: mhi: core: Add support for forced PM resume iio: trigger: stm32-timer: fix MODULE_ALIAS misc: rtsx: Avoid mangling IRQ during runtime PM nvmem: eeprom: at25: fix FRAM byte_len misc: fastrpc: fix improper packet size calculation MAINTAINERS: add maintainer for Qualcomm FastRPC driver bus: mhi: pci_generic: Fix device recovery failed issue iio: adc: stm32: fix null pointer on defer_probe error phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style iio: at91-sama5d2: Fix incorrect sign extension iio: adc: axp20x_adc: fix charging current reporting on AXP22x iio: gyro: adxrs290: fix data signedness phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns iio: ad7768-1: Call iio_trigger_notify_done() on error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two fixes for clock chip drivers: - A regression fix for the Designware APB timer. A recent change to the error checking code transformed the error condition wrongly so it turned into a fail if good condition. - Fix a clang build fail of the ARM architected timer driver" * tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic() clocksource/drivers/dw_apb_timer_of: Fix probe failure -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Fix the multi vector MSI allocation on Armada 370XP - Do interrupt acknowledgement correctly in the aspeed-scu driver - Make the IPR register offset correct in the NVIC driver - Make redistribution table flushing correct by issueing a SYNC command to ensure that the invalidation command has been executed - Plug a device tree node reference leak in the bcm7210-l2 driver - Trivial fixes in the MIPS GIC and the Apple AIC drivers" * tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node() irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL irqchip/apple-aic: Mark aic_init_smp() as __init irqchip: nvic: Fix offset for Interrupt Priority Offsets irqchip/mips-gic: Use bitfield helpers irqchip/aspeed-scu: Replace update_bits with write_bits. irqchip/armada-370-xp: Fix support for Multi-MSI interrupts irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix for the x86 scheduler topology: Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the scheduler towards the ATOM cluster as that has more total capacity. Use selection based on CPU priority instead" * tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched,x86: Don't use cluster topology for x86 hybrid CPUs
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky from Guo Ren: "Only one fix for csky: fix fpu config macro" * tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux: csky: fix typo of fpu config macro
-
Pavel Hofman authored
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for extracting multiple-transactions bits from wMaxPacketSize value. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Hofman authored
The checks performed by commit aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") require that initial value of the maxp variable contains both maximum packet size bits (10..0) and multiple-transactions bits (12..11). However, the existing code assings only the maximum packet size bits. This patch assigns all bits of wMaxPacketSize to the variable. Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable <stable@vger.kernel.org> Acked-by:
-
Greg Kroah-Hartman authored
Under some conditions, USB gadget devices can show allocated buffer contents to a host. Fix this up by zero-allocating them so that any extra data will all just be zeros. Reported-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Tested-by:
-
Greg Kroah-Hartman authored
Sometimes USB hosts can ask for buffers that are too large from endpoint 0, which should not be allowed. If this happens for OUT requests, stall the endpoint, but for IN requests, trim the request size to the endpoint buffer size. Co-developed-by:
-
