- 13 Aug, 2020 3 commits
-
-
Miaohe Lin authored
Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200813122117.51173-1-linmiaohe@huawei.com
-
Huang Shijie authored
We have three categories locks, not two. Signed-off-by:
Huang Shijie <sjhuang@iluvatar.ai> Signed-off-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200813060220.18199-1-sjhuang@iluvatar.ai
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Not much this cycle - mostly non urgent driver fixes: - ds1374: use watchdog core - pcf2127: add alarm and pcf2129 support" * tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: fix alarm handling rtc: pcf2127: add alarm support rtc: pcf2127: add pca2129 device id rtc: max77686: Fix wake-ups for max77620 rtc: ds1307: provide an indication that the watchdog has fired rtc: ds1374: remove unused define rtc: ds1374: fix RTC_DRV_DS1374_WDT dependencies rtc: cleanup obsolete comment about struct rtc_class_ops rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable rtc: ds1374: wdt: Use watchdog core for watchdog part rtc: Replace HTTP links with HTTPS ones rtc: goldfish: Enable interrupt in set_alarm() when necessary rtc: max77686: Do not allow interrupt to fire before system resume rtc: imxdi: fix trivial typos rtc: cpcap: fix range
-
- 12 Aug, 2020 37 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "Xiubo has completed his work on filesystem client metrics, they are sent to all available MDSes once per second now. Other than that, we have a lot of fixes and cleanups all around the filesystem, including a tweak to cut down on MDS request resends in multi-MDS setups from Yanhu and fixups for SELinux symlink labeling and MClientSession message decoding from Jeff" * tag 'ceph-for-5.9-rc1' of git://github.com/ceph/ceph-client: (22 commits) ceph: handle zero-length feature mask in session messages ceph: use frag's MDS in either mode ceph: move sb->wb_pagevec_pool to be a global mempool ceph: set sec_context xattr on symlink creation ceph: remove redundant initialization of variable mds ceph: fix use-after-free for fsc->mdsc ceph: remove unused variables in ceph_mdsmap_decode() ceph: delete repeated words in fs/ceph/ ceph: send client provided metric flags in client metadata ceph: periodically send perf metrics to MDSes ceph: check the sesion state and return false in case it is closed libceph: replace HTTP links with HTTPS ones ceph: remove unnecessary cast in kfree() libceph: just have osd_req_op_init() return a pointer ceph: do not access the kiocb after aio requests ceph: clean up and optimize ceph_check_delayed_caps() ceph: fix potential mdsc use-after-free crash ceph: switch to WARN_ON_ONCE in encode_supported_features() ceph: add global total_caps to count the mdsc's total caps number ceph: add check_session_state() helper and make it global ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc updates from Helge Deller: - Oscar Carter contributed a patch which fixes parisc's usage of dereference_function_descriptor() and thus will allow using the -Wcast-function-type compiler option in the top-level Makefile - Sven Schnelle fixed a bug in the SBA code to prevent crashes during kexec - John David Anglin provided implementations for __smp_store_release() and __smp_load_acquire barriers() which avoids using the sync assembler instruction and thus speeds up barrier paths - Some whitespace cleanups in parisc's atomic.h header file * 'parisc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Implement __smp_store_release and __smp_load_acquire barriers parisc: mask out enable and reserved bits from sba imask parisc: Whitespace cleanups in atomic.h parisc/kernel/ftrace: Remove function callback casts sections.h: dereference_function_descriptor() returns void pointer
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Paolo Bonzini: "PPC: - Improvements and bugfixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support ARM: - Split the VHE and nVHE hypervisor code bases, build the EL2 code separately, allowing for the VHE code to now be built with instrumentation - Level-based TLB invalidation support - Restructure of the vcpu register storage to accomodate the NV code - Pointer Authentication available for guests on nVHE hosts - Simplification of the system register table parsing - MMU cleanups and fixes - A number of post-32bit cleanups and other fixes MIPS: - compilation fixes x86: - bugfixes - support for the SERIALIZE instruction" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits) KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabled MIPS: KVM: Convert a fallthrough comment to fallthrough MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64 x86: Expose SERIALIZE for supported cpuid KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled KVM: arm64: Move S1PTW S2 fault logic out of io_mem_abort() KVM: arm64: Don't skip cache maintenance for read-only memslots KVM: arm64: Handle data and instruction external aborts the same way KVM: arm64: Rename kvm_vcpu_dabt_isextabt() KVM: arm: Add trace name for ARM_NISV KVM: arm64: Ensure that all nVHE hyp code is in .hyp.text KVM: arm64: Substitute RANDOMIZE_BASE for HARDEN_EL2_VECTORS KVM: arm64: Make nVHE ASLR conditional on RANDOMIZE_BASE KVM: PPC: Book3S HV: Rework secure mem slot dropping KVM: PPC: Book3S HV: Move kvmppc_svm_page_out up KVM: PPC: Book3S HV: Migrate hot plugged memory KVM: PPC: Book3S HV: In H_SVM_INIT_DONE, migrate remaining normal-GFNs to secure-GFNs KVM: PPC: Book3S HV: Track the state GFNs associated with secure VMs KVM: PPC: Book3S HV: Disable page merging in H_SVM_INIT_START ... -
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull more clk updates from Stephen Boyd: "Here's some more updates that missed the last pull request because I happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: drop unused function __clk_get_flags clk: hsdk: Fix bad dependency on IOMEM dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: mmp: avoid missing prototype warning clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file clk: qoriq: add LS1021A core pll mux options clk: clk-atlas6: fix return value check in atlas6_clk_init() clk: tegra: pll: Improve PLLM enable-state detection clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - f71808e_wdt imporvements - dw_wdt improvements - mlx-wdt: support new watchdog type with longer timeout period - fallthrough pseudo-keyword replacements - overall small fixes and improvements * tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: rti-wdt: balance pm runtime enable calls watchdog: rti-wdt: attach to running watchdog during probe watchdog: add support for adjusting last known HW keepalive time watchdog: use __watchdog_ping in startup watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot' watchdog: pcwd_usb: remove needless check before usb_free_coherent() watchdog: Replace HTTP links with HTTPS ones dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support watchdog: initialize device before misc_register watchdog: booke_wdt: Add common nowayout parameter driver watchdog: scx200_wdt: Use fallthrough pseudo-keyword watchdog: Use fallthrough pseudo-keyword watchdog: f71808e_wdt: do stricter parameter validation watchdog: f71808e_wdt: clear watchdog timeout occurred flag watchdog: f71808e_wdt: remove use of wrong watchdog_info option watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options docs: watchdog: codify ident.options as superset of possible status flags dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150 dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML watchdog: dw_wdt: Add DebugFS files ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Inclusive naming updates (Alex Williamson) - Intel X550 INTx quirk (Alex Williamson) - Error path resched between unmaps (Xiang Zheng) - SPAPR IOMMU pin_user_pages() conversion (John Hubbard) - Trivial mutex simplification (Alex Williamson) - QAT device denylist (Giovanni Cabiddu) - type1 IOMMU ioctl refactor (Liu Yi L) * tag 'vfio-v5.9-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Refactor vfio_iommu_type1_ioctl() vfio/pci: Add QAT devices to denylist vfio/pci: Add device denylist PCI: Add Intel QuickAssist device IDs vfio/pci: Hold igate across releasing eventfd contexts vfio/spapr_tce: convert get_user_pages() --> pin_user_pages() vfio/type1: Add conditional rescheduling after iommu map failed vfio/pci: Add Intel X550 to hidden INTx devices vfio: Cleanup allowed driver naming
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This has a few vmwgfx regression fixes we hit from the merge window (one in TTM), it also has a bunch of amdgpu fixes along with a scattering everywhere else. core: - Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - Remove null check for kfree in drm_dev_release. - Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition. - re-added docs for drm_gem_flink_ioctl() - add orientation quirk for ASUS T103HAF ttm: - ttm: fix page-offset calculation within TTM - revert patch causing vmwgfx regressions fbcon: - Fix a fbcon OOB read in fbdev, found by syzbot. vga: - Mark vga_tryget static as it's not used elsewhere. amdgpu: - Re-add spelling typo fix - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes - SMU i2c fix - Power fixes vmwgfx: - regression fixes for modesetting crashes - misc fixes xlnx: - Small fixes to xlnx. omap: - Fix mode initialization in omap_connector_mode_valid(). - force runtime PM suspend on system suspend tidss: - fix modeset init for DPI panels" * tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm: (70 commits) drm/ttm: revert "drm/ttm: make TT creation purely optional v3" drm/vmwgfx: fix spelling mistake "Cant" -> "Can't" drm/vmwgfx: fix spelling mistake "Cound" -> "Could" drm/vmwgfx/ldu: Use drm_mode_config_reset drm/vmwgfx/sou: Use drm_mode_config_reset drm/vmwgfx/stdu: Use drm_mode_config_reset drm/vmwgfx: Fix two list_for_each loop exit tests drm/vmwgfx: Use correct vmw_legacy_display_unit pointer drm/vmwgfx: Use struct_size() helper drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3) drm/amd/powerplay: update swSMU VCN/JPEG PG logics drm/amdgpu: use mode1 reset by default for sienna_cichlid drm/amdgpu/smu: rework i2c adpater registration drm/amd/display: Display goes blank after inst drm/amd/display: Change null plane state swizzle mode to 4kb_s drm/amd/display: Use helper function to check for HDMI signal drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sink drm/amd/display: Fix logger context drm/amd/display: populate new dml variable ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ...
-
Peter Xu authored
After the cleanup of page fault accounting, gup does not need to pass task_struct around any more. Remove that parameter in the whole gup stack. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Xu authored
Here're the last pieces of page fault accounting that were still done outside handle_mm_fault() where we still have regs==NULL when calling handle_mm_fault(): arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault arch/sparc/mm/fault_32.c: force_user_fault arch/um/kernel/trap.c: handle_page_fault mm/gup.c: faultin_page fixup_user_fault mm/hmm.c: hmm_vma_fault mm/ksm.c: break_ksm Some of them has the issue of duplicated accounting for page fault retries. Some of them didn't do the accounting at all. This patch cleans all these up by letting handle_mm_fault() to do per-task page fault accounting even if regs==NULL (though we'll still skip the perf event accountings). With that, we can safely remove all the outliers now. There's another functional change in that now we account the page faults to the caller of gup, rather than the task_struct that passed into the gup code. More information of this can be found at [1]. After this patch, below things should never be touched again outside handle_mm_fault(): - task_struct.[maj|min]_flt - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] [1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/Signed-off-by: -
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Remove the PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] perf events because it's now also done in handle_mm_fault(). Move the PERF_COUNT_SW_PAGE_FAULTS event higher before taking mmap_sem for the fault, then it'll match with the rest of the archs. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/20200707225021.200906-24-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by:
David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/20200707225021.200906-22-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Link: http://lkml.kernel.org/r/20200707225021.200906-18-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20200707225021.200906-17-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
Stafford Horne <shorne@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Link: http://lkml.kernel.org/r/20200707225021.200906-15-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Fix PERF_COUNT_SW_PAGE_FAULTS perf event manually for page fault retries, by moving it before taking mmap_sem. Signed-off-by:
Greentime Hu <green.hu@gmail.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Link: http://lkml.kernel.org/r/20200707225021.200906-13-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Fix PERF_COUNT_SW_PAGE_FAULTS perf event manually for page fault retries, by moving it before taking mmap_sem. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: http://lkml.kernel.org/r/20200707225021.200906-12-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
Brian Cain <bcain@codeaurora.org> Link: http://lkml.kernel.org/r/20200707225021.200906-8-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by:
Guo Ren <guoren@kernel.org> Link: http://lkml.kernel.org/r/20200707225021.200906-7-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. To do this, we pass pt_regs pointer into __do_page_fault(). Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. To do this, we need to pass the pt_regs pointer into __do_page_fault(). Fix PERF_COUNT_SW_PAGE_FAULTS perf event manually for page fault retries, by moving it before taking mmap_sem. Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Fix PERF_COUNT_SW_PAGE_FAULTS perf event manually for page fault retries, by moving it before taking mmap_sem. Signed-off-by:
-
Peter Xu authored
Use the general page fault accounting by passing regs into handle_mm_fault(). Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by:
-
Peter Xu authored
Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b982 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by:
-
Joonsoo Kim authored
There is a well-defined migration target allocation callback. Use it. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1596180906-8442-3-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by:
-
Joonsoo Kim authored
new_non_cma_page() in gup.c requires to allocate the new page that is not on the CMA area. new_non_cma_page() implements it by using allocation scope APIs. However, there is a work-around for hugetlb. Normal hugetlb page allocation API for migration is alloc_huge_page_nodemask(). It consists of two steps. First is dequeing from the pool. Second is, if there is no available page on the queue, allocating by using the page allocator. new_non_cma_page() can't use this API since first step (deque) isn't aware of scope API to exclude CMA area. So, new_non_cma_page() exports hugetlb internal function for the second step, alloc_migrate_huge_page(), to global scope and uses it directly. This is suboptimal since hugetlb pages on the queue cannot be utilized. This patch tries to fix this situation by making the deque function on hugetlb CMA aware. In the deque function, CMA memory is skipped if PF_MEMALLOC_NOCMA flag is found. Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
-
Joonsoo Kim authored
We have well defined scope API to exclude CMA region. Use it rather than manipulating gfp_mask manually. With this change, we can now restore __GFP_MOVABLE for gfp_mask like as usual migration target allocation. It would result in that the ZONE_MOVABLE is also searched by page allocator. For hugetlb, gfp_mask is redefined since it has a regular allocation mask filter for migration target. __GPF_NOWARN is added to hugetlb gfp_mask filter since a new user for gfp_mask filter, gup, want to be silent when allocation fails. Note that this can be considered as a fix for the commit 9a4e9f3b ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region"). However, "Fixes" tag isn't added here since it is just suboptimal but it doesn't cause any problem. Suggested-by:
-
Joonsoo Kim authored
There is a well-defined standard migration target callback. Use it directly. Signed-off-by:
-
