Emulate SYSENTER in Compatibility Mode for all vCPUs models that are
compatible with Intel's architecture, as the behavior if SYSENTER is
architecturally defined in Intel's SDM, i.e. should be followed by any
CPU that implements Intel's architecture.

Link: https://lore.kernel.org/r/20240405235603.1173076-9-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Emulate bits 63:32 of the SYSENTER_R{I,S}P MSRs for all vCPUs that are
compatible with Intel's architecture, not just strictly vCPUs that have
vendor==Intel.  The behavior of bits 63:32 is architecturally defined in
the SDM, i.e. not some uarch specific quirk of Intel CPUs.

Link: https://lore.kernel.org/r/20240405235603.1173076-8-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Use guest_cpuid_is_intel_compatible() to determine whether SYSCALL in
32-bit Protected Mode (including Compatibility Mode) should #UD or succeed.
The existing code already does the exact equivalent of
guest_cpuid_is_intel_compatible(), just in a rather roundabout way.

No functional change intended.

Link: https://lore.kernel.org/r/20240405235603.1173076-7-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Treat code #DBs as inhibited in MOV/POP-SS shadows for vCPU models that
are Intel compatible, not just strictly vCPUs with vendor==Intel.  The
behavior is explicitly called out in the SDM, and thus architectural, i.e.
applies to all CPUs that implement Intel's architecture, and isn't a quirk
that is unique to CPUs manufactured by Intel:

  However, if an instruction breakpoint is placed on an instruction located
  immediately after a POP SS/MOV SS instruction, the breakpoint will be
  suppressed as if EFLAGS.RF were 1.

Applying the behavior strictly to Intel wasn't intentional, KVM simply
didn't have a concept of "Intel compatible" as of commit baf67ca8
("KVM: x86: Suppress code #DBs on Intel if MOV/POP SS blocking is active").

Link: https://lore.kernel.org/r/20240405235603.1173076-6-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Extend Intel's check on MSR_TSC_AUX[63:32] to all vCPU models that are
Intel compatible, i.e. aren't AMD or Hygon in KVM's world, as the behavior
is architectural, i.e. applies to any CPU that is compatible with Intel's
architecture.  Applying the behavior strictly to Intel wasn't intentional,
KVM simply didn't have a concept of "Intel compatible" as of commit
61a05d44 ("KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to
guest CPU model").

Link: https://lore.kernel.org/r/20240405235603.1173076-5-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Zero out the sampling period for checkpointed events if the host supports
HLE or RTM, i.e. supports transactions and thus checkpointed events, not
based on whether the vCPU vendor model is Intel.  Perf's refusal to allow
a sample period for checkpointed events is based purely on whether or not
the CPU supports HLE/RTM transactions, i.e. perf has no knowledge of the
vCPU vendor model.

Note, it is _extremely_ unlikely that the existing code is a problem in
real world usage, as there are far, far bigger hurdles that would need to
be cleared to support cross-vendor vPMUs.  The motivation is mainly to
eliminate the use of guest_cpuid_is_intel(), in order to get to a state
where KVM pivots on AMD vs. Intel compatibility, i.e. doesn't check for
exactly vendor==Intel except in rare circumstances (i.e. for CPU quirks).

Cc: Like Xu <like.xu.linux@gmail.com>
Link: https://lore.kernel.org/r/20240405235603.1173076-4-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

After commit 0ec3d6d1 "KVM: x86: Fully defer to vendor code to decide
how to force immediate exit", vmx_request_immediate_exit() was removed.
Commit 5f18c642 "KVM: VMX: Move out vmx_x86_ops to 'main.c' to dispatch
VMX and TDX" added its declaration by accident.  Remove it.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20240506075025.2251131-1-binbin.wu@linux.intel.comSigned-off-by: Sean Christopherson <seanjc@google.com>

The check_apicv_inhibit_reasons() callback implementation was dropped in
the commit b3f257a8 ("KVM: x86: Track required APICv inhibits with
variable, not callback"), but the definition removal was missed in the
final version patch (it was removed in the v4). Therefore, it should be
dropped, and the vmx_check_apicv_inhibit_reasons() function declaration
should also be removed.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/54abd1d0ccaba4d532f81df61259b9c0e021fbde.1714977229.git.houwenlong.hwl@antgroup.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Keep kvm_apicv_inhibit enum naming consistent with the current pattern by
renaming the reason/enumerator defined as APICV_INHIBIT_REASON_DISABLE to
APICV_INHIBIT_REASON_DISABLED.

No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-3-alejandro.j.jimenez@oracle.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Use the tracing infrastructure helper __print_flags() for printing flag
bitfields, to enhance the trace output by displaying a string describing
each of the inhibit reasons set.

The kvm_apicv_inhibit_changed tracepoint currently shows the raw bitmap
value, requiring the user to consult the source file where the inhibit
reasons are defined to decode the trace output.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-2-alejandro.j.jimenez@oracle.comCo-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>

Add KVM_CAP_X86_APIC_BUS_CYCLES_NS capability to configure the APIC
bus clock frequency for APIC timer emulation.
Allow KVM_ENABLE_CAPABILITY(KVM_CAP_X86_APIC_BUS_CYCLES_NS) to set the
frequency in nanoseconds. When using this capability, the user space
VMM should configure CPUID leaf 0x15 to advertise the frequency.

Vishal reported that the TDX guest kernel expects a 25MHz APIC bus
frequency but ends up getting interrupts at a significantly higher rate.

The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.

In addition, per Intel SDM:
    "The APIC timer frequency will be the processor’s bus clock or core
     crystal clock frequency (when TSC/core crystal clock ratio is
     enumerated in CPUID leaf 0x15) divided by the value specified in
     the divide configuration register."

The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.

The KVM doesn't enumerate CPUID leaf 0x15 to the guest unless the user
space VMM sets it using KVM_SET_CPUID. If the CPUID leaf 0x15 is
enumerated, the guest kernel uses it as the APIC bus frequency. If not,
the guest kernel measures the frequency based on other known timers like
the ACPI timer or the legacy PIT. As reported by Vishal the TDX guest
kernel expects a 25MHz timer frequency but gets timer interrupt more
frequently due to the 1GHz frequency used by KVM.

To ensure that the guest doesn't have a conflicting view of the APIC bus
frequency, allow the userspace to tell KVM to use the same frequency that
TDX mandates instead of the default 1Ghz.
Reported-by: Vishal Annapurve <vannapurve@google.com>
Closes: https://lore.kernel.org/lkml/20231006011255.4163884-1-vannapurve@google.comSigned-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/6748a4c12269e756f0c48680da8ccc5367c31ce7.1714081726.git.reinette.chatre@intel.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Introduce the VM variable "nanoseconds per APIC bus cycle" in
preparation to make the APIC bus frequency configurable.

The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.

In addition, per Intel SDM:
    "The APIC timer frequency will be the processor’s bus clock or core
     crystal clock frequency (when TSC/core crystal clock ratio is
     enumerated in CPUID leaf 0x15) divided by the value specified in
     the divide configuration register."

The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.

Introduce the VM variable "nanoseconds per APIC bus cycle" to prepare
for allowing userspace to tell KVM to use the frequency that TDX mandates
instead of the default 1Ghz. Doing so ensures that the guest doesn't have
a conflicting view of the APIC bus frequency.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
[reinette: rework changelog]
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/ae75ce37c6c38bb4efd10a0a41932984c40b24ac.1714081726.git.reinette.chatre@intel.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Remove APIC_BUS_FREQUENCY and calculate it based on nanoseconds per APIC
bus cycle.  APIC_BUS_FREQUENCY is used only for HV_X64_MSR_APIC_FREQUENCY.
The MSR is not frequently read, calculate it every time.

There are two constants related to the APIC bus frequency:
APIC_BUS_FREQUENCY and APIC_BUS_CYCLE_NS.
Only one value is required because one can be calculated from the other:
   APIC_BUS_CYCLES_NS = 1000 * 1000 * 1000 / APIC_BUS_FREQUENCY.

Remove APIC_BUS_FREQUENCY and instead calculate it when needed.
This prepares for support of configurable APIC bus frequency by
requiring to change only a single variable.
Suggested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Maxim Levitsky <maximlevitsky@gmail.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
[reinette: rework changelog]
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/76a659d0898e87ebd73ee7c922f984a87a6ab370.1714081726.git.reinette.chatre@intel.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Move shadow_phys_bits into "struct kvm_host_values", i.e. into KVM's
global "kvm_host" variable, so that it is automatically exported for use
in vendor modules.  Rename the variable/field to maxphyaddr to more
clearly capture what value it holds, now that it's used outside of the
MMU (and because the "shadow" part is more than a bit misleading as the
variable is not at all unique to shadow paging).

Recomputing the raw/true host.MAXPHYADDR on every use can be subtly
expensive, e.g. it will incur a VM-Exit on the CPUID if KVM is running as
a nested hypervisor.  Vendor code already has access to the information,
e.g. by directly doing CPUID or by invoking kvm_get_shadow_phys_bits(), so
there's no tangible benefit to making it MMU-only.

Link: https://lore.kernel.org/r/20240423221521.2923759-5-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Snapshot shadow_phys_bits when kvm.ko is loaded, not when a vendor module
is loaded, to guard against usage of shadow_phys_bits before it is
initialized.  The computation isn't vendor specific in any way, i.e. there
there is no reason to wait to snapshot the value until a vendor module is
loaded, nor is there any reason to recompute the value every time a vendor
module is loaded.

Opportunistically convert it from "read mostly" to "read-only after init".

Link: https://lore.kernel.org/r/20240423221521.2923759-4-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Use KVM's snapshot of the host's XCR0 when stuffing SEV-ES host state
instead of reading XCR0 from hardware.  XCR0 is only written during
boot, i.e. won't change while KVM is running (and KVM at large is hosed
if that doesn't hold true).

Link: https://lore.kernel.org/r/20240423221521.2923759-3-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Add "struct kvm_host_values kvm_host" to hold the various host values
that KVM snapshots during initialization.  Bundling the host values into
a single struct simplifies adding new MSRs and other features with host
state/values that KVM cares about, and provides a one-stop shop.  E.g.
adding a new value requires one line, whereas tracking each value
individual often requires three: declaration, definition, and export.

No functional change intended.

Link: https://lore.kernel.org/r/20240423221521.2923759-2-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Pull ata fixes from Niklas Cassel:

 - Add a quirk for three different devices that have shown issues with
   LPM (link power management). These devices appear to not implement
   LPM properly, since we see command timeouts when enabling LPM. The
   quirk disables LPM for these problematic devices. (Me)

 - Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
   needed and was originally added by mistake when LPM support was
   enabled for this AHCI controller. Enabling the quirk when not needed
   causes the the controller to not be able to detect the connected
   devices on some platforms.

* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
  ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
  ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous topology parsing fixes:

   - Fix topology parsing regression on older CPUs in the new AMD/Hygon
     parser

   - Fix boot crash on odd Intel Quark and similar CPUs that do not fill
     out cpuinfo_x86::x86_clflush_size and zero out
     cpuinfo_x86::x86_cache_alignment as a result.

     Provide 32 bytes as a general fallback value.

   - Fix topology enumeration on certain rare CPUs where the BIOS locks
     certain CPUID leaves and the kernel unlocked them late, which broke
     with the new topology parsing code. Factor out this unlocking logic
     and move it earlier in the parsing sequence"

* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology/intel: Unlock CPUID before evaluating anything
  x86/cpu: Provide default cache line size if not enumerated
  x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater

Pull scheduler fix from Ingo Molnar:
 "Export a symbol to make life easier for instrumentation/debugging"

* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/x86: Export 'percpu arch_freq_scale'

Pull perf events fix from Ingo Molnar:
 "Add missing MODULE_DESCRIPTION() lines"

* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
  perf/x86/rapl: Add missing MODULE_DESCRIPTION() line

Pull hardening fixes from Kees Cook:

 - scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
   strings

 - mailmap: update entry for Kees Cook

 - kunit/fortify: Remove __kmalloc_node() test

* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kunit/fortify: Remove __kmalloc_node() test
  mailmap: update entry for Kees Cook
  scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings

Pull powerpc fixes from Michael Ellerman:

 - Enforce full ordering for ATOMIC operations with BPF_FETCH

 - Fix uaccess build errors seen with GCC 13/14

 - Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT

 - Drop error message from lparcfg guest name lookup

Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.

* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
  powerpc/uaccess: Use YZ asm constraint for ld
  powerpc/uaccess: Fix build errors seen with GCC 13/14
  powerpc/pseries/lparcfg: drop error message from guest name lookup
  powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH

Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "After merging a commit 1fffe7a3 ("script: modpost: emit a warning
  when the description is missing"), MODULE_DESCRIPTOR seems to be
  mandatory for kernel modules. In FireWire subsystem, the most of
  practical kernel modules have the field, while KUnit test modules do
  not. A single patch is applied to fix them"

* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: add missing MODULE_DESCRIPTION() to test modules

Pull smb client fixes from Steve French:
 "Two small smb3 fixes:

   - Fix socket creation with sfu mount option (spotted by test generic/423)

   - Minor cleanup: fix missing description in two files"

* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix creating sockets when using sfu mount options
  fs: smb: common: add missing MODULE_DESCRIPTION() macros

Merge tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix a Kconfig bug regarding comparisons to 'm' or 'n'

 - Replace missed $(srctree)/$(src)

 - Fix unneeded kallsyms step 3

 - Remove incorrect "compatible" properties from image nodes in
   image.fit

 - Improve gen_kheaders.sh

 - Fix 'make dt_binding_check'

 - Clean up unnecessary code

* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
  kheaders: use `command -v` to test for existence of `cpio`
  kheaders: explicitly define file modes for archived headers
  scripts/make_fit: Drop fdt image entry compatible string
  kbuild: remove a stale comment about cleaning in link-vmlinux.sh
  kbuild: fix short log for AS in link-vmlinux.sh
  kbuild: change scripts/mksysmap into sed script
  kbuild: avoid unneeded kallsyms step 3
  kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
  kconfig: remove redundant check in expr_join_or()
  kconfig: fix comparison to constant symbols, 'm', 'n'
  kconfig: remove unused expr_is_no()

Pull xfs fixes from Chandan Babu:

 - Fix a livelock by dropping an xfarray sortinfo folio when an error
   is encountered

 - During extended attribute operations, Initialize transaction
   reservation computation based on attribute operation code

 - Relax symbolic link's ondisk verification code to allow symbolic
   links with short remote targets

 - Prevent soft lockups when unmapping file ranges and also during
   remapping blocks during a reflink operation

 - Fix compilation warnings when XFS is built with W=1 option

* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Add cond_resched to block unmap range and reflink remap path
  xfs: don't open-code u64_to_user_ptr
  xfs: allow symlinks with short remote targets
  xfs: fix xfs_init_attr_trans not handling explicit operation codes
  xfs: drop xfarray sortinfo folio on error
  xfs: Stop using __maybe_unused in xfs_alloc.c
  xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()

Pull tty fix from Greg KH:
 "Here is a single revert for a much-reported regression in 6.10-rc1
  when it comes to a few older architectures.

  Turns out that the VT ioctls don't work the same across all cpu types
  because of some old compatibility requrements for stuff like alpha and
  powerpc. So revert the change that attempted to have them use the
  _IO() macros and go back to the known-working values instead.

  This has NOT been in linux-next but has had many reports that it fixes
  the issue with 6.10-rc1"

* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "VT: Use macros to define ioctls"

Pull landlock fix from Mickaël Salaün:
 "This fixes a wrong path walk triggered by syzkaller"

* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add layout1.refer_mount_root
  landlock: Fix d_parent walk

This reverts commit 8c467f33.

Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull drm fixes from Dave Airlie:
 "This is the weekly fixes. Lots of small fixes across the board, one
  BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
  mostly with small fixes to all the other drivers.

  shmem:
   - fix BUG_ON in COW handling
   - warn when trying to pin imported objects

  buddy:
   - fix page size handling

  dma-buf:
   - sw-sync: Don't interfere with IRQ handling
   - fix kthreads-handling error path

  i915:
   - fix a race in audio component by registering it later
   - make DPT object unshrinkable to avoid shrinking when framebuffer
     has not shrunk
   - fix CCS id calculation to fix a perf regression
   - fix selftest caching mode
   - fix FIELD_PREP compiler warnings
   - fix indefinite wait for GT wakeref release
   - revert overeager multi-gt pm reference removal

  xe:
   - pcode polling timeout change
   - fix for deadlocks for faulting VMs
   - error-path lock imbalance fix

  amdgpu:
   - RAS fix
   - fix colorspace property for MST connectors
   - fix for PCIe DPM
   - silence UBSAN warning
   - GPUVM robustness fix
   - partition fix
   - drop deprecated I2C_CLASS_SPD

  amdkfd:
   - revert unused changes for certain 11.0.3 devices
   - simplify APU VRAM handling

  lima:
   - fix dma_resv-related deadlock in object pin

  msm:
   - remove build-time dependency on Python 3.9

  nouveau:
   - nvif: Fix possible integer overflow

  panel:
   - lg-sw43408: Select DP helpers; Declare backlight ops as static
   - sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel

  panfrost:
   - fix dma_resv-related deadlock in object pin"

* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
  drm/msm: remove python 3.9 dependency for compiling msm
  drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
  drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
  drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
  drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
  drm/amdgpu: Make CPX mode auto default in NPS4
  drm/amdkfd: simplify APU VRAM handling
  Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
  drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
  drm/amdgpu: silence UBSAN warning
  drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
  drm/i915: Fix audio component initialization
  drm/i915/dpt: Make DPT object unshrinkable
  drm/i915/gt: Fix CCS id's calculation for CCS mode setting
  drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
  drm/i915/selftests: Set always_coherent to false when reading from CPU
  drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
  drm/i915/guc: avoid FIELD_PREP warning
  drm/i915/gt: Disarm breadcrumbs if engines are already idle
  Revert "drm/i915: Remove extra multi-gt pm-references"
  ...

Merge tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - sttcs: Fix property spelling

 - intel-m10-bmc-hwmon: Fix multiplier for N6000 board power sensor

 - ltc2992: Fix memory leak

 - dell-smm: Add Dell G15 5511 to fan control whitelist

* tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (shtc1) Fix property misspelling
  hwmon: (intel-m10-bmc-hwmon) Fix multiplier for N6000 board power sensor
  hwmon: (ltc2992) Fix memory leak in ltc2992_parse_dt()
  hwmon: (dell-smm) Add Dell G15 5511 to fan control whitelist

Merge tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox

Pull mailbox fix from Jassi Brar:

 - zynqmp-ipi: fix linker error on some configurations

* tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox: zynqmp-ipi: drop irq_to_desc() call

Pull spi fixes from Mark Brown:
 "A series of fixes that came in since the merge window, the main thing
  being the fixes Andy did for DMA sync where we were calling into the
  DMA API in suprising ways and causing issues as a result, the main
  thing being confusing the IOMMU code.

  We've also got some fairly important fixes for the stm32 driver, it
  supports a wide range of hardware and some optimisations that were
  done recently have broken on some systems, and a fix to prevent
  glitched signals on the bus in the cadence driver"

* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: stm32: Don't warn about spurious interrupts
  spi: Assign dummy scatterlist to unidirectional transfers
  spi: cadence: Ensure data lines set to low during dummy-cycle period
  spi: stm32: Revert change that enabled controller before asserting CS
  spi: Check if transfer is mapped before calling DMA sync APIs
  spi: Don't mark message DMA mapped when no transfer in it is

Merge tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix that came in since -rc1, fixing misuse of a local variable in
  the DT parsing code in the RTQ2208 driver"

* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called

Pull regmap fix from Mark Brown:
 "The I2C bus was not taking account of the register and any padding
  bytes when handling maximum write sizes supported by an I2C adaptor,
  this patch from Jim Wylder fixes that"

* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-i2c: Subtract reg size from max_write

Pull block fixes from Jens Axboe:

 - NVMe fixes via Keith:
      - Removing unused fields (Kanchan)
      - Large folio offsets support (Kundan)
      - Multipath NUMA node initialiazation fix (Nilay)
      - Multipath IO stats accounting fixes (Keith)
      - Circular lockdep fix (Keith)
      - Target race condition fix (Sagi)
      - Target memory leak fix (Sagi)

 - bcache fixes

 - null_blk fixes (Damien)

 - Fix regression in io.max due to throttle low removal (Waiman)

 - DM limit table fixes (Christoph)

 - SCSI and block limit fixes (Christoph)

 - zone fixes (Damien)

 - Misc fixes (Christoph, Hannes, hexue)

* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
  blk-throttle: Fix incorrect display of io.max
  block: Fix zone write plugging handling of devices with a runt zone
  block: Fix validation of zoned device with a runt zone
  null_blk: Do not allow runt zone with zone capacity smaller then zone size
  nvmet: fix a possible leak when destroy a ctrl during qp establishment
  nvme: use srcu for iterating namespace list
  bcache: code cleanup in __bch_bucket_alloc_set()
  bcache: call force_wake_up_gc() if necessary in check_should_bypass()
  bcache: allow allocator to invalidate bucket in gc
  block: check for max_hw_sectors underflow
  block: stack max_user_sectors
  sd: also set max_user_sectors when setting max_sectors
  null_blk: Print correct max open zones limit in null_init_zoned_dev()
  block: delete redundant function declaration
  null_blk: Fix return value of nullb_device_power_store()
  dm: make dm_set_zones_restrictions work on the queue limits
  dm: remove dm_check_zoned
  dm: move setting zoned_enabled to dm_table_set_restrictions
  block: remove blk_queue_max_integrity_segments
  nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
  ...

Pull io_uring fixes from Jens Axboe:
 "A couple of minor fixes for issues introduced in the 6.10 merge window:

   - Ensure that all read/write ops have an appropriate cleanup handler
     set (Breno)

   - Regression for applications still doing multiple mmaps even if
     FEAT_SINGLE_MMAP is set (me)

   - Move kmsg inquiry setting above any potential failure point,
     avoiding a spurious NONEMPTY flag setting on early error (me)"

* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
  io_uring/net: assign kmsg inq/flags before buffer selection
  io_uring/rw: Free iovec before cleaning async data
  io_uring: don't attempt to mmap larger than what the user asks for

__kmalloc_node() is considered an "internal" function to the Slab, so
drop it from explicit testing.

Link: https://lore.kernel.org/r/20240531185703.work.588-kees@kernel.orgSigned-off-by: Kees Cook <kees@kernel.org>