- 18 Aug, 2024 11 commits
-
-
Francois Dugast authored
Those counters were used to keep track of the numbers VMs in fault mode and in non-fault mode, to determine if the whole device was in fault mode or not. This is no longer needed so remove those variables and their usages. Signed-off-by:
Francois Dugast <francois.dugast@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Francois Dugast authored
With this restriction, all VMs on the device must be faulting VMs if there is already one faulting VM, in which case the device is considered in fault mode. This prevents for example an application from running 3D jobs for the compositor while submitting a SVM compute job on the same device. Now that mutual exclusion of faulting LR jobs and dma fence jobs is ensured on the hw engine group, remove this restriction to allow running faulting and non-faulting VMs on the same device. Signed-off-by:
-
Francois Dugast authored
If the job about to be submitted is a dma-fence job, update the current execution mode of the hw engine group. This triggers an immediate suspend of the exec queues running faulting long-running jobs. If the job about to be submitted is a long-running job, kick a new worker used to resume the exec queues running faulting long-running jobs once the dma-fence jobs have completed. v2: Kick the resume worker from exec IOCTL, switch to unordered workqueue, destroy it after use (Matt Brost) v3: Do not resume if no exec queue was suspended (Matt Brost) v4: Squash commits (Matt Brost) v5: Do not kick the worker when xe_vm_in_preempt_fence_mode (Matt Brost) Signed-off-by: -
Francois Dugast authored
Provide a way to safely transition execution modes of the hw engine group ahead of the actual execution. When necessary, either wait for running jobs to complete or preempt them, thus ensuring mutual exclusion between execution modes. Unlike a mutex, the rw_semaphore used in this context allows multiple submissions in the same mode. v2: Use lockdep_assert_held_write, add annotations (Matt Brost) v3: Fix kernel doc, remove redundant code (Matt Brost) v4: Now that xe_hw_engine_group_suspend_faulting_lr_jobs can fail, propagate the error to the caller (Matt Brost) Signed-off-by: -
Francois Dugast authored
This is a required feature for faulting long running jobs not to be submitted while dma fence jobs are running on the hw engine group. v2: Switch to lockdep_assert_held_write in worker, get a proper reference for the last fence (Matt Brost) v3: Directly call dma_fence_put with the fence ref (Matt Brost) Signed-off-by: -
Francois Dugast authored
Ensure we can safely take a ref of the exec queue's last fence from the context of resuming jobs from the hw engine group. The locking requirements differ from the general case, hence the introduction of this new function. v2: Add kernel doc, rework the code to prevent code duplication v3: Fix kernel doc, remove now unnecessary lockdep variants (Matt Brost) v4: Remove new put function (Matt Brost) Signed-off-by:
-
Francois Dugast authored
This code section is the same as the body of xe_exec_queue_last_fence_put_unlocked() so call the function instead and remove duplicated code to make maintenance easier. Signed-off-by:
-
Francois Dugast authored
This is a required feature for dma fence jobs to preempt faulting long running jobs in order to ensure mutual exclusion on a given hw engine group. v2: Pipeline calls to suspend(q) and suspend_wait(q) to improve efficiency, switch to lockdep_assert_held_write (Matt Brost) v3: Return error on suspend_wait failure to propagate on the call stack up to IOCTL (Matt Brost) Signed-off-by: -
Francois Dugast authored
Add helpers to safely add and delete the exec queues attached to a hw engine group, and make use them at the time of creation and destruction of the exec queues. Keeping track of them is required to control the execution mode of the hw engine group. v2: Improve error handling and robustness, suspend exec queues created in fault mode if group in dma-fence mode, init queue link (Matt Brost) v3: Delete queue from hw engine group when it is destroyed by the user, also clean up at the time of closing the file in case the user did not destroy the queue v4: Use correct list when checking if empty, do not add the queue if VM is in xe_vm_in_preempt_fence_mode (Matt Brost) v5: Remove unrelated newline, add checks and asserts for group, unwind on suspend failure (Matt Brost) Signed-off-by: -
Francois Dugast authored
Rely on wait_event_interruptible_timeout() to put the process to sleep with TASK_INTERRUPTIBLE. It allows using this function in interruptible context. v2: Propagate error on wait_event_interruptible_timeout (Matt Brost) Signed-off-by:
-
Francois Dugast authored
A xe_hw_engine_group is a group of hw engines. Two hw engines belong to the same xe_hw_engine_group if one hw engine cannot make progress while the other is stuck on a page fault. Typically, hw engines of the same group share some resources such as EUs, but this really depends on the hardware configuration of the platforms. The simple engines partitioning proposed here might be too conservative but is intended to work for existing platforms. It can be optimized later if more sets of independent engines are identified. The hw engine groups are intended to be used in the context of faulting long-running jobs submissions. v2: Move to own files, improve error handling (Matt Brost) v3: Fix build issue reported by CI, improve commit message (Matt Roper) v4: Fix kernel doc v5: Add switch case for XE_ENGINE_CLASS_OTHER Signed-off-by:
-
- 17 Aug, 2024 1 commit
-
-
Matthew Brost authored
User binds map to engines with can fault, faults depend on user binds completion, thus we can deadlock. Avoid this by using reserved copy engine for user binds on faulting devices. While we are here, normalize bind queue creation with a helper. v2: - Pass in extensions to bind queue creation (CI) v3: - s/resevered/reserved (Lucas) - Fix NULL hwe check (Jonathan) Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240816034033.53837-1-matthew.brost@intel.com
-
- 16 Aug, 2024 8 commits
-
-
Matt Roper authored
When steering MCR register ranges of type "DSS," the group_id and instance_id values are calculated by dividing the DSS pool according to the size of a gslice or cslice, depending on the platform. These values haven't changed much on past platforms, so we've been able to hardcode the proper divisor so far. However the layout may not be so fixed on future platforms so the proper, future-proof way to determine this is by using some of the attributes from the GuC's hwconfig table. The hwconfig has two attributes reflecting the architectural maximum slice and subslice counts (i.e., before any fusing is considered) that can be used for the purposes of calculating MCR steering targets. If the hwconfig is lacking the necessary values (which should only be possible on older platforms before these attributes were added), we can still fall back to the old hardcoded values. Going forward the hwconfig is expected to always provide the information we need on newer platforms, and any failure to do so will be considered a bug in the firmware that will prevent us from switching to the buggy firmware release. It's worth noting that over time GuC's hwconfig has provided a couple different keys with similar-sounding descriptions. For our purposes here, we only trust the newer key "70" which has supplanted the similarly-named key "2" that existed on older platforms. Bspec: 73210 Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Matt Roper authored
Although the query uapi is the official way to get at the GuC's hwconfig table contents, it's still useful to have a quick debugfs interface to dump the table in a human-readable format while debugging the driver. Signed-off-by:
Jagmeet Randhawa <jagmeet.randhawa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815172602.2729146-3-matthew.d.roper@intel.com
-
Lucas De Marchi authored
Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for the display side. This resolves the current conflict for the enable_display module parameter and allows further pending refactors. Signed-off-by:Lucas De Marchi <lucas.demarchi@intel.com>
-
Matthew Brost authored
Replace for_each_tile plus a check against primary tile with for_each_remote_tile in tiles_fini. The latter macro does this for us. Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240816040208.62695-1-matthew.brost@intel.comSigned-off-by:
-
Daniele Ceraolo Spurio authored
Exec_queue cleanup requires HW access, so we need to use devm instead of drmm for it. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815230541.3828206-2-lucas.demarchi@intel.comSigned-off-by:
-
Daniele Ceraolo Spurio authored
Drmm actions are not the right ones to clean up BOs and we should use devm instead. However, we can also instead just allocate the objects using the managed_bo function, which will internally register the correct cleanup call and therefore allows us to simplify the code. While at it, switch to drmm_kzalloc for the GSC proxy allocation to further simplify the cleanup. Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2024-08-13' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next - Type-C programming fix for MTL+ (Gustavo) - Fix display clock workaround (Mitul) - Fix DP LTTPR detection (Imre) - Calculate vblank delay more accurately (Ville) - Make vrr_{enabling,disabling}() usable outside intel_display.c (Ville) - FBC clean-up (Ville) - DP link-training fixes and clean-up (Imre) - Make I2C terminology more inclusive (Easwar) - Make read-only array bw_gbps static const (Colin) - HDCP fixes and improvements (Suraj) - DP VSC SDP fixes and clean-ups (Suraj, Mitul) - Fix opregion leak in Xe code (Lucas) - Fix possible int overflow in skl_ddi_calculate_wrpll (Nikita)] - General display clean-ups and conversion towards intel_display (Jani) - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates (Imre) - Add VRR condition for DPKGC Enablement (Suraj) - Use backlight power constants (Zimmermann) - Correct dual pps handling for MTL_PCH+ (Dnyaneshwar) - Dump DSC HW state (Imre) - Replace double blank with single blank after comma (Andi) - Read display register timeout on BMG (Mitul) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZruWsyTv3nzdArDk@intel.com
-
Matthew Brost authored
Only set tile->mmio.regs to NULL if not the root tile in tile_fini. The root tile mmio regs is setup ealier in MMIO init thus it should be set to NULL in mmio_fini. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
- 15 Aug, 2024 3 commits
-
-
Daniele Ceraolo Spurio authored
The BO cleanup touches the GGTT and therefore requires the HW to be available, so we need to use devm instead of drmm. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1160Signed-off-by:
-
Daniele Ceraolo Spurio authored
An upcoming PXP patch will kill queues at runtime when a PXP invalidation event occurs, so we need exec_queue_kill to be safe to call multiple times. v2: Add documentation (Matt B) Signed-off-by:
-
Matthew Auld authored
This was fixed in commit b7dce525 ("drm/xe/queue: fix engine_class bounds check"), but then re-introduced in commit 6f20fc09 ("drm/xe: Move and export xe_hw_engine lookup.") which should only be simple code movement of the existing function. Fixes: 6f20fc09 ("drm/xe: Move and export xe_hw_engine lookup.") Signed-off-by:
-
- 14 Aug, 2024 3 commits
-
-
Tejas Upadhyay authored
Register STATELESS_COMPRESSION_CTRL should be considered mcr register which should write to all slices as per documentation. Bspec: 71185 Fixes: ecabb5e6 ("drm/xe/xe2: Add performance turning changes") Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Shekhar Chauhan <shekhar.chauhan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240814095614.909774-4-tejas.upadhyay@intel.comSigned-off-by:
-
Tejas Upadhyay authored
Register GAMREQSTRM_CTRL should be considered mcr register which should write to all slices as per documentation. Bspec: 71185 Fixes: 01570b44 ("drm/xe/bmg: implement Wa_16023588340") Reviewed-by:
-
Tejas Upadhyay authored
xe_gt_enable_host_l2_vram() is reading the XE2_GAMREQSTRM_CTRL register that is currently missing the MCR annotation. However, just adding the annotation doesn't work as this function is called before MCR handling is initialized in xe_gt_mcr_init(). xe_gt_enable_host_l2_vram() is used to implement WA 16023588340 that needs to be done as early as possible during initialization in order to be effective since the MMIO writes impact it. In the failure scenario, driver would simply not be able to bind successfully. Moving xe_gt_enable_host_l2_vram() later, after MCR initialization is done, only incurs a few additional HW accesses, particularly when loading GuC for hwconfig. Binding/unbinding the driver 100 times in BMG still works so it should be ok to start handling the WA a little bit later. This is sufficient to allow adding the MCR annotation to XE2_GAMREQSTRM_CTRL. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
- 13 Aug, 2024 8 commits
-
-
Lucas De Marchi authored
The different approach used by xe regarding the initialization of display HW has been proved a great addition for early driver bring up: core xe can be tested without having all the bits sorted out on the display side. On the other hand, the approach exposed by i915-display is to *actively* disable the display by programming it if needed, i.e. if it was left enabled by firmware. It also has its use to make sure the HW is actually disabled and not wasting power. However having both the way it is in xe doesn't expose a good interface wrt module params. From modinfo: disable_display:Disable display (default: false) (bool) enable_display:Enable display (bool) Rename enable_display to probe_display to try to convey the message that the HW is being touched and improve the module param description. To avoid confusion, the enable_display is renamed everywhere, not only in the module param. New description for the parameters: disable_display:Disable display (default: false) (bool) probe_display:Probe display HW, otherwise it's left untouched (default: true) (bool) Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240813141931.3141395-1-lucas.demarchi@intel.comSigned-off-by:
-
Himal Prasad Ghimiray authored
Remove the xe parameter from the pde_encode_pat_index and pte_encode_pat_index functions, as it is no longer used. Signed-off-by:
-
Matt Roper authored
Early in the development of Xe we identified an issue with SVG state handling on DG2 and MTL (and later on Xe2 as well). In commit 72ac3047 ("drm/xe: Emit SVG state on RCS during driver load on DG2 and MTL") and commit fb24b858 ("drm/xe/xe2: Update SVG state handling") we implemented our own workaround to prevent SVG state from leaking from context A to context B in cases where context B never issues a specific state setting. The hardware teams have now created official workaround Wa_14019789679 to cover this issue. The workaround description only requires emitting 3DSTATE_MESH_CONTROL, since they believe that's the only SVG instruction that would potentially remain unset by a context B, but still cause notable issues if unwanted values were inherited from context A. However since we already have a more extensive implementation that emits the entire SVG state and prevents _any_ SVG state from unintentionally leaking, we'll stick with our existing implementation just to be safe. Signed-off-by:
-
Jani Nikula authored
There are enough users for kernel device to xe device conversion, add a helper for it. Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/38c80846e70c7e410850530426384e17cff9d031.1723458544.git.jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
We have a helper for converting pci device to xe device, use it. Reviewed-by:
-
Jani Nikula authored
xe_call_for_each_device() has been unused since commit 57ecead3 ("drm/xe/tests: Convert xe_mocs live tests"). Remove it and the related dev_to_xe_device_fn() and struct kunit_test_data. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Nirmoy Das authored
Parameterize clearing ccs and bo data in xe_migrate_clear() which higher layers can utilize. This patch will be used later on when doing bo data clear for igfx as well. v2: Replace multiple params with flags in xe_migrate_clear (Matt B) v3: s/CLEAR_BO_DATA_FLAG_*/XE_MIGRATE_CLEAR_FLAG_* and move to xe_migrate.h. other nits(Matt B) Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:Akshata Jahagirdar <akshata.jahagirdar@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com>
-
Jani Nikula authored
We have a helper for converting pci device to i915 device, use it. v2: Also convert i915_pci_probe() (Gustavo) Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812103415.1540096-1-jani.nikula@intel.comSigned-off-by:
-
- 12 Aug, 2024 6 commits
-
-
Tejas Upadhyay authored
Wa_14021821874 applies to xe2_hpg V2(Himal): - Use space after define Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Nirmoy Das authored
Add stats for tlb invalidation count which can be viewed with per GT stat debugfs file. Example output: cat /sys/kernel/debug/dri/0/gt0/stats tlb_inval_count: 22 v2: fix #include order(Tejas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sai Gowtham Ch <sai.gowtham.ch@intel.com> Reviewed-by:
-
Nirmoy Das authored
Add skeleton APIs for recording and printing various stats over debugfs. This currently only added counter types stats which is backed by atomic_t and wrapped with CONFIG_DRM_XE_STATS so this can be disabled on production system. v4: Rebase and other minor fixes (Matt) v3: s/CONFIG_DRM_XE_STATS/CONFIG_DEBUG_FS(Lucas) v2: add missing docs Add boundary checks for stats id and other improvements (Michal) Fix build when CONFIG_DRM_XE_STATS is disabled(Matt) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sai Gowtham Ch <sai.gowtham.ch@intel.com> Reviewed-by: -
Jani Nikula authored
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_bios.[ch] to struct intel_display. Do one drive-by conversion of unnecessary hex usage to decimal. Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0d0261a53aff5f141b16b482222a5ffce78e176e.1723213547.git.jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_opregion.[ch] to struct intel_display. v2: - Fix declarations for !CONFIG_ACPI (Imre, kernel test robot) - Pass encoder/connector directly to intel_display() (Imre) Reviewed-by:
-
Jani Nikula authored
Prefer the short encoder/connector names for struct intel_encoder/intel_connector variables and parameters. Reviewed-by:
-
