- 24 Aug, 2018 38 commits
-
-
Sven Eckelmann authored
[ Upstream commit 9713cb0c ] A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_v_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: b71bb6f9 ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Acked-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sven Eckelmann authored
[ Upstream commit b5685d26 ] A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_iv_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: efb766af ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Reported-by:
Andreas Ziegler <dev@andreas-ziegler.de> Tested-by:
-
Casey Schaufler authored
[ Upstream commit 7b4e8843 ] Smack: Mark inode instant in smack_task_to_inode /proc clean-up in commit 1bbc5513 resulted in smack_task_to_inode() being called before smack_d_instantiate. This resulted in the smk_inode value being ignored, even while present for files in /proc/self. Marking the inode as instant here fixes that. Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 6c6da928 ] After recieving MLD querys, we update idev->mc_maxdelay with max_delay from query header. This make the later unsolicited reports have the same interval with mc_maxdelay, which means we may send unsolicited reports with long interval time instead of default configured interval time. Also as we will not call ipv6_mc_reset() after device up. This issue will be there even after leave the group and join other groups. Fixes: fc4eba58 ("ipv6: make unsolicited report intervals configurable for mld") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit fcc784be ] While debugging where things were going wrong with mapping enabling/disabling interrupts with the lockdep state and actual real enabling and disabling interrupts, I had to silent the IRQ disabling/enabling in debug_check_no_locks_freed() because it was always showing up as it was called before the splat was. Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed() but for all internal lockdep functions, as they hide useful information about where interrupts were used incorrectly last. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.homeSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit ba56bc3a ] When booting a 64 KB pages kernel on a ACPI GICv3 system that implements support for v2 emulation, the following warning is produced GICV size 0x2000 not a multiple of page size 0x10000 and support for v2 emulation is disabled, preventing GICv2 VMs from being able to run on such hosts. The reason is that vgic_v3_probe() performs a sanity check on the size of the window (it should be a multiple of the page size), while the ACPI MADT parsing code hardcodes the size of the window to 8 KB. This makes sense, considering that ACPI does not bother to describe the size in the first place, under the assumption that platforms implementing ACPI will follow the architecture and not put anything else in the same 64 KB window. So let's just drop the sanity check altogether, and assume that the window is at least 64 KB in size. Fixes: 90977732 ("KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit ea0820bb ] Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Alexey Brodkin authored
[ Upstream commit 2f24ef74 ] machine_desc->init_per_cpu() hook is supposed to be per cpu initialization and would seem to apply equally to UP and/or SMP. Infact the comment in header file seems to suggest it works for UP too, which was not the case and this patch. This enables !CONFIG_SMP build for platforms such as hsdk. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: trimmeed changelog] Signed-off-by:
-
Max Gurtuvoy authored
[ Upstream commit d68a90e1 ] Controllers that are not yet enabled should not really enforce keep alive timeouts, but we still want to track a timeout and cleanup in case a host died before it enabled the controller. Hence, simply reset the keep alive timer when the controller is enabled. Suggested-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dinh Nguyen authored
[ Upstream commit bc8a2d9b ] The Stratix10 platform has an additional reset line, OCP(Open Core Protocol), that also needs to get deasserted for the stmmac ethernet controller to work. Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build dwmac-socfpga. Also, remove the redundant check for the reset controller pointer. The reset driver already checks for the pointer and returns 0 if the pointer is NULL. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 7892bd08 ] if dev_get_valid_name failed, propagate its return code and remove the setting err to ENODEV, it will be set to 0 again before dev_change_net_namespace exits. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Stefan Agner authored
[ Upstream commit 4e8439aa ] The array bpq_eth_addr is only used to get the size of an address, whereas the bcast_addr is used to set the broadcast address. This leads to a warning when using clang: drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not needed and will not be emitted [-Wunneeded-internal-declaration] static char bpq_eth_addr[6]; ^ Remove both variables and use the common eth_broadcast_addr to set the broadcast address. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit 3256d29f ] lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 3935a709 ] Avoid calling a SIMD fastpath handler if it is NULL. The check is needed to handle an unlikely scenario where unsolicited interrupt is destined to a PF in INTa mode. Fixes: fe56b9e6 ("qed: Add module with basic common support") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Zhizhou Zhang authored
[ Upstream commit b154886f ] We can't call function trace hook before setup percpu offset. When entering secondary_start_kernel(), percpu offset has not been initialized. So this lead hotplug malfunction. Here is the flow to reproduce this bug: echo 0 > /sys/devices/system/cpu/cpu1/online echo function > /sys/kernel/debug/tracing/current_tracer echo 1 > /sys/kernel/debug/tracing/tracing_on echo 1 > /sys/devices/system/cpu/cpu1/online Acked-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Zhizhou Zhang <zhizhouzhang@asrmicro.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 7c63ca24 ] When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 93efbd39 ] When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 84c029a7 ] When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Grigor Tovmasyan authored
[ Upstream commit 9bb073a0 ] Freed allocated request for ep0 to prevent memory leak in case when dwc2_driver_probe() failed. Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Chunfeng Yun authored
[ Upstream commit 980900d6 ] It happens when enable debug log, if set_alt() returns USB_GADGET_DELAYED_STATUS and usb_composite_setup_continue() is called before increasing count of @delayed_status, so fix it by using spinlock of @cdev->lock. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by:
Jay Hsu <shih-chieh.hsu@mediatek.com> Signed-off-by:
-
William Wu authored
[ Upstream commit 70c3c8cb ] If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Tested-by:
Gevorg Sahakyan <sahakyan@synopsys.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by:
William Wu <william.wu@rock-chips.com> Signed-off-by:
-
John Garry authored
[ Upstream commit fae2a637 ] Currently smatch warns of possible Spectre-V1 issue in ahci_led_store(): drivers/ata/libahci.c:1150 ahci_led_store() warn: potential spectre issue 'pp->em_priv' (local cap) Userspace controls @pmp from following callchain: em_message->store() ->ata_scsi_em_message_store() -->ap->ops->em_store() --->ahci_led_store() After the mask+shift @pmp is effectively an 8b value, which is used to index into an array of length 8, so sanitize the array index. Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Vijay Immanuel authored
[ Upstream commit 375dc53d ] Run the completer task to post a work completion after processing a memory registration or invalidate work request. This covers the case where the memory registration or invalidate was the last work request posted to the qp. Signed-off-by:
Vijay Immanuel <vijayi@attalasystems.com> Reviewed-by:
Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Alison Wang authored
[ Upstream commit 89610dc2 ] In the situation that DE and SE aren’t shared the same interrupt number, the Global SE interrupts mask bit MASK_IRQ_EN in MASKIRQ must be set, or else other mask bits will not work and no SE interrupt will occur. This patch enables MASK_IRQ_EN for SE to fix this problem. Signed-off-by:
Alison Wang <alison.wang@nxp.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Ray Jui authored
[ Upstream commit e605c287 ] Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: 7ac674e8 ("arm64: dts: Add I2C nodes for NS2") Signed-off-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ray Jui authored
[ Upstream commit 6cb1628a ] Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC Fixes: cd590b50 ("ARM: dts: enable PCIe support for Cygnus") Fixes: f6b88935 ("ARM: dts: Enable MSI support for Broadcom Cygnus") Signed-off-by:
-
Ray Jui authored
[ Upstream commit 71ca3409 ] Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC. Fixes: b51c05a3 ("ARM: dts: add I2C device nodes for Broadcom Cygnus") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 403fde64 ] The interrupts for the PCIe controllers should all be of type IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: d71eb941 ("ARM: dts: NSP: Add MSI support on PCI") Fixes: 52219902 ("ARM: dts: NSP: Fix PCIE DT issue") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit a3e32e78 ] The i2c controller should use IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: 0f9f27a3 ("ARM: dts: NSP: Add I2C support to the DT") Signed-off-by:
-
Fathi Boudra authored
[ Upstream commit d6a3e551 ] Unless the software synchronization objects (CONFIG_SW_SYNC) is enabled, the sync test will be skipped: TAP version 13 1..0 # Skipped: Sync framework not supported by kernel Add a config fragment file to be able to run "make kselftest-merge" to enable relevant configuration required in order to run the sync test. Signed-off-by:
Fathi Boudra <fathi.boudra@linaro.org> Link: https://lkml.org/lkml/2017/5/5/14Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 68581446 ] When zram test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit d7d5311d ] When user test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Add an explicit check for module presence and return skip code if module isn't present. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 87815780 ] When static_keys test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Added an explicit searches for test_static_key_base and test_static_keys modules and return skip code if they aren't found to differentiate between the failure to load the module condition and module not found condition. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 856e7c4b ] When pstore_post_reboot test gets skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9ce7bc03 ] It is a waste of memory to use a full "struct netns_sysctl_ipv6" while only one pointer is really used, considering netns_sysctl_ipv6 keeps growing. Also, since "struct netns_frags" has cache line alignment, it is better to move the frags_hdr pointer outside, otherwise we spend a full cache line for this pointer. This saves 192 bytes of memory per netns. Fixes: c038a767 ("ipv6: add a new namespace for nf_conntrack_reasm") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 896e5188 ] The clocks have already been explicitly disabled and put as part of remove() so the runtime suspend callback must not be run when balancing the runtime PM usage count before returning. Fixes: 16adc674 ("usb: dwc3: add generic OF glue layer") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alexey Brodkin authored
[ Upstream commit 74c11e30 ] GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default thus we don't see any problems during Linux kernel compilation. ----------------------------->8------------------------ arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [enabled] ----------------------------->8------------------------ But if we try to use so-called Elf32 toolchain with GCC configured for arc*-*-elf* then we'd see the following failure: ----------------------------->8------------------------ init/do_mounts.o: In function 'init_rootfs': do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o arc-elf32-ld: final link failed: Symbol needs debug section which does not exist make: *** [vmlinux] Error 1 ----------------------------->8------------------------ That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in Elf32 GCC: ----------------------------->8------------------------ arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [disabled] ----------------------------->8------------------------ Now to make it possible to use Elf32 toolchain for building Linux kernel we're explicitly add "-mmedium-calls" to CFLAGS. And since we add "-mmedium-calls" to the global CFLAGS there's no point in having per-file copies thus removing them. Signed-off-by:
-
Andy Lutomirski authored
commit b3681dd5 upstream. error_entry and error_exit communicate the user vs. kernel status of the frame using %ebx. This is unnecessary -- the information is in regs->cs. Just use regs->cs. This makes error_entry simpler and makes error_exit more robust. It also fixes a nasty bug. Before all the Spectre nonsense, the xen_failsafe_callback entry point returned like this: ALLOC_PT_GPREGS_ON_STACK SAVE_C_REGS SAVE_EXTRA_REGS ENCODE_FRAME_POINTER jmp error_exit And it did not go through error_entry. This was bogus: RBX contained garbage, and error_exit expected a flag in RBX. Fortunately, it generally contained *nonzero* garbage, so the correct code path was used. As part of the Spectre fixes, code was added to clear RBX to mitigate certain speculation attacks. Now, depending on kernel configuration, RBX got zeroed and, when running some Wine workloads, the kernel crashes. This was introduced by: commit 3ac6d8c7 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface") With this patch applied, RBX is no longer needed as a flag, and the problem goes away. I suspect that malicious userspace could use this bug to crash the kernel even without the offending patch applied, though. [ Historical note: I wrote this patch as a cleanup before I was aware of the bug it fixed. ] [ Note to stable maintainers: this should probably get applied to all kernels. If you're nervous about that, a more conservative fix to add xorl %ebx,%ebx; incl %ebx before the jump to error_exit should also fix the problem. ] Reported-and-tested-by:
M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: xen-devel@lists.xenproject.org Fixes: 3ac6d8c7 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface") Link: http://lkml.kernel.org/r/b5010a090d3586b2d6e06c7ad3ec5542d1241c45.1532282627.git.luto@kernel.orgSigned-off-by:
Sarah Newman <srn@prgmr.com> Signed-off-by:
-
- 22 Aug, 2018 2 commits
-
-
Greg Kroah-Hartman authored
-
Sudip Mukherjee authored
commit 4e1a720d upstream. slub debug reported: [ 440.648642] ============================================================================= [ 440.648649] BUG kmalloc-1024 (Tainted: G BU O ): Poison overwritten [ 440.648651] ----------------------------------------------------------------------------- [ 440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b [ 440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047 [ 440.648671] ___slab_alloc.constprop.24+0x1fc/0x292 [ 440.648675] __slab_alloc.isra.18.constprop.23+0x1c/0x25 [ 440.648677] __kmalloc+0xb6/0x17f [ 440.648680] sk_prot_alloc+0x6b/0xc6 [ 440.648683] sk_alloc+0x1e/0xa1 [ 440.648700] sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth] [ 440.648716] sco_connect_cfm+0x166/0x281 [bluetooth] [ 440.648731] hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth] [ 440.648746] hci_event_packet+0x28b/0x2326 [bluetooth] [ 440.648759] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648764] process_one_work+0x163/0x2b2 [ 440.648767] worker_thread+0x1a9/0x25c [ 440.648770] kthread+0xf8/0xfd [ 440.648774] ret_from_fork+0x2e/0x38 [ 440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047 [ 440.648782] __slab_free+0x4b/0x27a [ 440.648784] kfree+0x12e/0x155 [ 440.648787] __sk_destruct+0xd3/0xdf [ 440.648790] sk_destruct+0x27/0x29 [ 440.648793] __sk_free+0x75/0x91 [ 440.648795] sk_free+0x1c/0x1e [ 440.648810] sco_sock_kill+0x5a/0x5f [bluetooth] [ 440.648825] sco_conn_del+0x8e/0xba [bluetooth] [ 440.648840] sco_disconn_cfm+0x3a/0x41 [bluetooth] [ 440.648855] hci_event_packet+0x45e/0x2326 [bluetooth] [ 440.648868] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648872] process_one_work+0x163/0x2b2 [ 440.648875] worker_thread+0x1a9/0x25c [ 440.648877] kthread+0xf8/0xfd [ 440.648880] ret_from_fork+0x2e/0x38 [ 440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x (null) flags=0x40008100 [ 440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8 When KASAN was enabled, it reported: [ 210.096613] ================================================================== [ 210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127 [ 210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040 [ 210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G U O 4.14.47-20180606+ #2 [ 210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017 [ 210.096693] Workqueue: hci0 hci_rx_work [bluetooth] [ 210.096698] Call Trace: [ 210.096711] dump_stack+0x46/0x59 [ 210.096722] print_address_description+0x6b/0x23b [ 210.096729] ? ex_handler_refcount+0x5b/0x127 [ 210.096736] kasan_report+0x220/0x246 [ 210.096744] ex_handler_refcount+0x5b/0x127 [ 210.096751] ? ex_handler_clear_fs+0x85/0x85 [ 210.096757] fixup_exception+0x8c/0x96 [ 210.096766] do_trap+0x66/0x2c1 [ 210.096773] do_error_trap+0x152/0x180 [ 210.096781] ? fixup_bug+0x78/0x78 [ 210.096817] ? hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096824] ? __schedule+0x113b/0x1453 [ 210.096830] ? sysctl_net_exit+0xe/0xe [ 210.096837] ? __wake_up_common+0x343/0x343 [ 210.096843] ? insert_work+0x107/0x163 [ 210.096850] invalid_op+0x1b/0x40 [ 210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296 [ 210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160 [ 210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940 [ 210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b [ 210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488 [ 210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008 [ 210.096920] ? __sk_destruct+0x2c6/0x2d4 [ 210.096959] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.096969] ? __local_bh_enable_ip+0x43/0x5b [ 210.097004] ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth] [ 210.097039] ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth] [ 210.097075] ? l2cap_ertm_init+0x94e/0x94e [bluetooth] [ 210.097093] ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd] [ 210.097102] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097109] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097115] ? __update_load_avg_se.isra.2+0x217/0x3a4 [ 210.097122] ? set_next_entity+0x7c3/0x12cd [ 210.097128] ? pick_next_entity+0x25e/0x26c [ 210.097135] ? pick_next_task_fair+0x2ca/0xc1a [ 210.097141] ? switch_mm_irqs_off+0x346/0xb4f [ 210.097147] ? __switch_to+0x769/0xbc4 [ 210.097153] ? compat_start_thread+0x66/0x66 [ 210.097188] ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth] [ 210.097195] ? finish_task_switch+0x392/0x431 [ 210.097228] ? hci_rx_work+0x154/0x487 [bluetooth] [ 210.097260] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097269] process_one_work+0x579/0x9e9 [ 210.097277] worker_thread+0x68f/0x804 [ 210.097285] kthread+0x31c/0x32b [ 210.097292] ? rescuer_thread+0x70c/0x70c [ 210.097299] ? kthread_create_on_node+0xa3/0xa3 [ 210.097306] ret_from_fork+0x35/0x40 [ 210.097314] Allocated by task 2040: [ 210.097323] kasan_kmalloc.part.1+0x51/0xc7 [ 210.097328] __kmalloc+0x17f/0x1b6 [ 210.097335] sk_prot_alloc+0xf2/0x1a3 [ 210.097340] sk_alloc+0x22/0x297 [ 210.097375] sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth] [ 210.097410] sco_connect_cfm+0x2d0/0x566 [bluetooth] [ 210.097443] hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth] [ 210.097476] hci_event_packet+0x85e/0x7de2 [bluetooth] [ 210.097507] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097512] process_one_work+0x579/0x9e9 [ 210.097517] worker_thread+0x68f/0x804 [ 210.097523] kthread+0x31c/0x32b [ 210.097529] ret_from_fork+0x35/0x40 [ 210.097533] Freed by task 2040: [ 210.097539] kasan_slab_free+0xb3/0x15e [ 210.097544] kfree+0x103/0x1a9 [ 210.097549] __sk_destruct+0x2c6/0x2d4 [ 210.097584] sco_conn_del.isra.1+0xba/0x10e [bluetooth] [ 210.097617] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.097648] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097653] process_one_work+0x579/0x9e9 [ 210.097658] worker_thread+0x68f/0x804 [ 210.097663] kthread+0x31c/0x32b [ 210.097670] ret_from_fork+0x35/0x40 [ 210.097676] The buggy address belongs to the object at ffff880107e170e8 which belongs to the cache kmalloc-1024 of size 1024 [ 210.097681] The buggy address is located 120 bytes inside of 1024-byte region [ffff880107e170e8, ffff880107e174e8) [ 210.097683] The buggy address belongs to the page: [ 210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping: (null) index:0xffff880107e15b68 compound_mapcount: 0 [ 210.110194] flags: 0x8000000000008100(slab|head) [ 210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016 [ 210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000 [ 210.115451] page dumped because: kasan: bad access detected [ 210.115454] Memory state around the buggy address: [ 210.115460] ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 210.115465] ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115472] ^ [ 210.115477] ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115481] ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115483] ================================================================== And finally when BT_DBG() and ftrace was enabled it showed: <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_close <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_release <...>-14979 [001] .... 186.104192: sco_sock_kill: sk ef0497a0 state 9 <...>-14979 [001] .... 186.104193: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104246: sco_sock_kill <-sco_conn_del kworker/u9:2-792 [001] .... 186.104248: sco_sock_kill: sk ef0497a0 state 9 kworker/u9:2-792 [001] .... 186.104249: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct <-__sk_destruct kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct: sk ef0497a0 kworker/u9:2-792 [001] .... 186.104860: hci_conn_del <-hci_event_packet kworker/u9:2-792 [001] .... 186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266 Only in the failed case, sco_sock_kill() gets called with the same sock pointer two times. Add a check for SOCK_DEAD to avoid continue killing a socket which has already been killed. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
