- 26 Mar, 2006 40 commits
-
-
Akinobu Mita authored
This patch introduces the C-language equivalents of the functions below: void __set_bit(int nr, volatile unsigned long *addr); void __clear_bit(int nr, volatile unsigned long *addr); void __change_bit(int nr, volatile unsigned long *addr); int __test_and_set_bit(int nr, volatile unsigned long *addr); int __test_and_clear_bit(int nr, volatile unsigned long *addr); int __test_and_change_bit(int nr, volatile unsigned long *addr); int test_bit(int nr, const volatile unsigned long *addr); In include/asm-generic/bitops/non-atomic.h This code largely copied from: asm-powerpc/bitops.h Signed-off-by:
Akinobu Mita <mita@miraclelinux.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Akinobu Mita authored
This patch introduces the C-language equivalents of the functions below: void set_bit(int nr, volatile unsigned long *addr); void clear_bit(int nr, volatile unsigned long *addr); void change_bit(int nr, volatile unsigned long *addr); int test_and_set_bit(int nr, volatile unsigned long *addr); int test_and_clear_bit(int nr, volatile unsigned long *addr); int test_and_change_bit(int nr, volatile unsigned long *addr); In include/asm-generic/bitops/atomic.h This code largely copied from: include/asm-powerpc/bitops.h include/asm-parisc/bitops.h include/asm-parisc/atomic.h Signed-off-by:
-
Akinobu Mita authored
Bitmap functions for the minix filesystem and the ext2 filesystem except ext2_set_bit_atomic() and ext2_clear_bit_atomic() do not require the atomic guarantees. But these are defined by using atomic bit operations on several architectures. (cris, frv, h8300, ia64, m32r, m68k, m68knommu, mips, s390, sh, sh64, sparc, sparc64, v850, and xtensa) This patch switches to non atomic bit operation. Signed-off-by:
-
Akinobu Mita authored
remove unnecessary local_irq_restore() after cris_atomic_restore() in test_and_set_bit(). Signed-off-by:
-
Akinobu Mita authored
Noticed by Michael Tokarev add missing ()-pair in __ffz() macro for parisc Signed-off-by:
-
Akinobu Mita authored
__set_bit() --> cpu_set() cleanup Signed-off-by:
-
Akinobu Mita authored
Use config options instead of gcc builtin definition to tell the use of instruction set extensions (CIX and FIX). This is introduced to tell the kbuild system the use of opmized hweight*() routines on alpha architecture. Signed-off-by:
-
Richard Knutsson authored
sound/oss/sonicvibes.c:421: error: static declaration of hweight32 follows non-static declaration include/asm-generic/bitops/hweight.h:6: error: previous declaration of hweight32 was here Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by:
-
Akinobu Mita authored
This patch defines constant_fls() instead of removed generic_fls(). Signed-off-by:
-
Akinobu Mita authored
Build fix for user mode linux. Signed-off-by:
-
Akinobu Mita authored
s/fucntion/function/ typo fixes Signed-off-by:
-
Akinobu Mita authored
Fix warning messages triggered by bitops code consolidation patches. cxn_bitmap is the array of unsigned long. '&' is unnesesary for the argument of *_bit() routins. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Morton authored
It's about to go away. Cc: Akinobu Mita <mita@miraclelinux.com> Signed-off-by:
-
Dave Peterson authored
Change all instances of EXPORT_SYMBOL() in the core EDAC module to EXPORT_SYMBOL_GPL(). Signed-off-by:
David S. Peterson <dsp@llnl.gov> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Dave Peterson authored
- Add entries to MAINTAINERS list for EDAC-E752X, EDAC-E7XXX, and EDAC-R82600 chipset drivers - Fix MAINTAINERS entry for EDAC-CORE so it uses tabs rather than spaces to indent. This is consistent with how the other entries are formatted. Signed-off-by:
-
Dave Peterson authored
Patch from Dave Jiang <djiang@mvista.com>: Fix EDAC e752x driver so it outputs sysbus-specific error message when sysbus error detected. Signed-off-by:
-
Dave Peterson authored
Fix spelling errors in EDAC documentation. Signed-off-by:
-
Dave Peterson authored
Cosmetic indentation/formatting cleanup for EDAC code. Make sure we are using tabs rather than spaces to indent, etc. Signed-off-by:
-
Dave Peterson authored
Fix EDAC code so EXPORT_SYMBOL comes after the function that is being exported. This is to maintain consistency with the rest of the kernel. Signed-off-by:
-
Dave Peterson authored
- Add x86 dependency in drivers/edac/Kconfig for all current platform-specific modules. - Add PCI dependency to Radisys 82600 driver Signed-off-by:
-
Dave Peterson authored
- Fix code so we always hold mem_ctls_mutex while we are stepping through the list of mem_ctl_info structures. Otherwise bad things may happen if one task is stepping through the list while another task is modifying it. We may eventually want to use reference counting to manage the mem_ctl_info structures. In the meantime we may as well fix this bug. - Don't disable interrupts while we are walking the list of mem_ctl_info structures in check_mc_devices(). This is unnecessary. Signed-off-by:
-
Dave Peterson authored
- After we unregister a kobject, wait for our kobject release method to call complete(). This causes us to wait until the kobject reference count reaches 0. Otherwise, a task accessing the EDAC sysfs interface can hold the reference count above 0 until after the EDAC module has been unloaded. When the reference count finally drops to 0, this will result in an attempt to call our release method inside the EDAC module after the module has already been unloaded. This isn't the best fix, since a process can get stuck sleeping forever uninterruptibly if the user does the following: rmmod my_module < /sys/my_sysfs/file I'll go back and implement a better fix later. However this should be ok for now. - Call edac_remove_sysfs_mci_device() from edac_mc_del_mc() rather than from edac_mc_free(). Since edac_mc_add_mc() calls edac_create_sysfs_mci_device(), edac_mc_del_mc() should call edac_remove_sysfs_mci_device(). Signed-off-by: -
Dave Peterson authored
- Remove calls to kobject_init(). These are unnecessary because kobject_register() calls kobject_init(). - Remove extra calls to kobject_put(). When we call kobject_unregister(), this releases our reference to the kobject. The extra calls to kobject_put() may cause the reference count to drop to 0 while a kobject is still in use. Signed-off-by:
-
Dave Peterson authored
This is part 2 of a 2-part patch set. Fix edac_mc_add_mc() so it cleans up properly if call to edac_create_sysfs_mci_device() fails. Signed-off-by:
-
Dave Peterson authored
This is part 1 of a 2-part patch set. The code changes are split into two parts to make the patches more readable. Move complete_mc_list_del() and del_mc_from_global_list() so we can call del_mc_from_global_list() from edac_mc_add_mc() without forward declarations. Perhaps using forward declarations would be better? I'm doing things this way because the rest of the code is missing them. Signed-off-by:
-
Dave Peterson authored
Fix xxx_probe1() functions so they call xxx_get_error_info() functions to clear initial errors. This is simpler and cleaner than duplicating the low-level code for accessing PCI config space. Signed-off-by:
-
Dave Peterson authored
Fix minor logic bug in e7xxx_remove_one(). Signed-off-by:
-
Dave Peterson authored
- Fix i82875p_probe1() so it calls pci_get_device() instead of pci_find_device(). - Fix i82875p_probe1() so it cleans up properly on failure. - Fix i82875p_init() so it cleans up properly on failure. Signed-off-by:
-
Dave Peterson authored
- Fix i82860_init() so it cleans up properly on failure. - Fix i82860_exit() so it cleans up properly. - Fix typo in comment (i.e. www.redhat.com.com). Signed-off-by:
-
Dave Peterson authored
- Add ctl_dev field to "struct e752x_dev_info". Then we can eliminate ugly switch statement from e752x_probe1(). - Remove code from e752x_probe1() that clears initial PCI bus parity errors. The core EDAC module already does this. Signed-off-by:
-
Dave Peterson authored
Eliminate unnecessary calls to pci_dev_get() and pci_dev_put() from amd76x driver. Signed-off-by:
-
Dave Peterson authored
Perform the following name substitutions on all source files: sed 's/BS_MOD_STR/EDAC_MOD_STR/g' sed 's/bs_thread_info/edac_thread_info/g' sed 's/bs_thread/edac_thread/g' sed 's/bs_xstr/edac_xstr/g' sed 's/bs_str/edac_str/g' The names that start with BS_ or bs_ are artifacts of when the code was called "bluesmoke". Signed-off-by: -
Dave Peterson authored
This implements the following idea: On Monday 30 January 2006 19:22, Eric W. Biederman wrote: > One piece missing from this conversation is the issue that we need errors > in a uniform format. That is why edac_mc has helper functions. > > However there will always be errors that don't fit any particular model. > Could we add a edac_printk(dev, ); That is similar to dev_printk but > prints out an EDAC header and the device on which the error was found? > Letting the rest of the string be user specified. > > For actual control that interface may be to blunt, but at least for people > looking in the logs it allows all of the errors to be detected and > harvested. Signed-off-by:
-
Dave Peterson authored
This patch was originally posted by Christoph Hellwig (see http://lkml.org/lkml/2006/2/14/331): "Christoph Hellwig" <hch@lst.de> wrote: > Use the kthread_ API instead of opencoding lots of hairy code for kernel > thread creation and teardown, including tasklist_lock abuse. > Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Eric Sesterhenn authored
This fixes coverity id #2. the if (i==0) is pretty useless, since we assing i=0, just the line before. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the connection-specific module "usb_gigaset", the hardware driver for Gigaset base stations connected via the M105 USB DECT adapter. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination, as well as handling asynchronous data transfers, PPP framing, byte stuffing, and flow control. Signed-off-by:
Hansjoerg Lipp <hjlipp@web.de> Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the payload data handler for the connection-specific module "bas_gigaset". It contains the code for handling isochronous data transfers, HDLC framing and flow control. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the main source file of the connection-specific module "bas_gigaset", the hardware driver for Gigaset base stations connected directly to the computer via USB. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the procfs interface to the gigaset module. The procfs interface provides access to status information and statistics about the Gigaset devices. If the drivers are built with the debugging option it also allows to change the amount of debugging output on the fly. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the tty interface to the gigaset module. The tty interface provides direct access to the AT command set of the Gigaset devices. Signed-off-by:
-
