Improve the following in rtl8169_start_xmit:
- tp->cur_tx can be accessed in parallel by rtl_tx(), therefore
  annotate the race by using WRITE_ONCE
- avoid checking stop_queue a second time by moving the doorbell check
- netif_stop_queue() uses atomic operation set_bit() that includes a
  full memory barrier on some platforms, therefore use
  smp_mb__after_atomic to avoid overhead
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/80085451-3eaf-507a-c7c0-08d607c46fbc@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d3fd6548 ("net: core: add dev_sw_netstats_tx_add") has added
function "dev_sw_netstats_tx_add()" to update net device per-cpu TX
stats.

Use this function instead of own code.

While on it, remove xfrmi_get_stats64() and replace it with
dev_get_tstats64().
Signed-off-by: Lev Stipakov <lev@openvpn.net>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20201113215939.147007-1-lev@openvpn.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d3fd6548 ("net: core: add dev_sw_netstats_tx_add") has added
function "dev_sw_netstats_tx_add()" to update net device per-cpu TX
stats.

Use this function instead of own code.

While on it, remove internal_get_stats() and replace it
with dev_get_tstats64().
Signed-off-by: Lev Stipakov <lev@openvpn.net>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20201113215336.145998-1-lev@openvpn.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Preparations for nexthop objects support - part 1/2

This patch set contains small and non-functional changes aimed at making
it easier to support nexthop objects in mlxsw. Follow up patches can be
found here [1].

Patches #1-#4 add a type field to the nexthop group struct instead of
the existing protocol field. This will be used later on to add a nexthop
object type, which can contain both IPv4 and IPv6 nexthops.

Patches #5-#7 move the IPv4 FIB info pointer (i.e., 'struct fib_info')
from the nexthop group struct to the route. The pointer will not be
available when the nexthop group is a nexthop object, but it needs to be
accessible to routes regardless.

Patch #8 is the biggest change, but it is an entirely cosmetic change
and should therefore be easy to review. The motivation and the change
itself are explained in detail in the commit message.

Patches #9-#12 perform small changes so that two functions that are
currently split between IPv4 and IPv6 could be consolidated in patches

Patch #15 removes an outdated comment.

[1] https://github.com/idosch/linux/tree/submit/nexthop_objects
====================

Link: https://lore.kernel.org/r/20201113160559.22148-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 21151f64 ("mlxsw: Add new FIB entry type for reject
routes") this comment is no longer correct. Remove it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The two functions are identical, so consolidate them to
mlxsw_sp_nexthop_type_fini().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The two functions are now identical, so consolidate them to
mlxsw_sp_nexthop_type_init().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove it as it is unused.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of passing the nexthop and resolving the nexthop netdev from it,
pass the nexthop netdev directly.

This will later allow us to consolidate code paths between IPv4 and IPv6
code.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of passing the route and resolving the nexthop netdev from it,
pass the nexthop netdev directly.

This will later allow us to consolidate code paths between IPv4 and IPv6
code.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The overlay protocol (i.e., IPv4/IPv6) that is being encapsulated has
no impact on whether a certain IP tunnel can be offloaded or not. Only
the underlay protocol matters.

Therefore, remove the unused overlay protocol parameter from the
callback.

This will later allow us to consolidate code paths between IPv4 and IPv6
code.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the individual nexthops member in the group and attributes of
the group (e.g., its type) are stored in the same struct (i.e., 'struct
mlxsw_sp_nexthop_group'). This is fine since the individual nexthops
cannot change during the lifetime of the group.

With nexthop objects this is no longer the case. An existing nexthop
group can be replaced to use a new set of nexthops. Creating a new
struct whenever a group is replaced entails replacing the group pointer
of all the routes (i.e., 'struct mlxsw_sp_fib_entry') using the group.

Avoid this inefficient step by splitting the nexthop group configuration
to a different struct (i.e., 'struct mlxsw_sp_nexthop_group_info').
When a nexthop group is replaced a new group info struct is created and
the individual rotues do not need to be touched.

Illustration after the change:

  mlxsw_sp_fib_entry    mlxsw_sp_nexthop_group    mlxsw_sp_nexthop_group_info
+-------------------+  +----------------------+  +---------------------------+
| nh_group;         +--> nhgi;                +-->                           |
|                   |  |                      |  |                           |
+-------------------+  +----------------------+  +---------------------------+

No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of storing the FIB info as 'priv' when the nexthop group
represents an IPv4 nexthop group, simply store it as a FIB info with a
proper comment.

When nexthop objects are supported, this field will become a union with
the nexthop object's identifier.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Not used anywhere.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When needed, IPv4 routes fetch the FIB info (i.e., 'struct fib_info')
from their associated nexthop group. This will not work when the nexthop
group represents a nexthop object (i.e., 'struct nexthop'), as it will
only have access to the nexthop's identifier.

Instead, store the FIB info in the route itself.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in the previous patch, nexthop objects can have both IPv4
and IPv6 nexthops in the same group. Therefore, move the neighbour table
to be a property of the nexthop instead of the nexthop group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Both IPv4 and IPv6 nexthop groups are hashed in the same table. The
protocol field is used to indicate how the hash should be computed for
each group.

When nexthop group objects are supported, the hash will be computed for
them based on the nexthop identifier.

To differentiate between all the nexthop group types, encode the type of
the group in the key instead of the protocol.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the type (i.e., IPv4/IPv6) of the nexthop group is derived
from the neighbour table associated with the group.

This is problematic when nexthop objects are taken into account, as a
nexthop group object can contain both IPv4 and IPv6 nexthops.

Instead, add a new field that indicates the type of the group and
initialize it during the group's creation. Currently, the types are IPv4
('struct fib_info') and IPv6 ('struct fib6_info'). In the future another
type will be added for nexthop objects ('struct nexthop').
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When comparing a key with a nexthop group in rhastable's obj_cmpfn()
callback, make sure that the key and nexthop group are of the same type
(i.e., IPv4 / IPv6).

The bug is not currently visible because IPv6 nexthop groups do not
populate the FIB info pointer and IPv4 nexthop groups do not set the
ifindex for the individual nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We don't use the parameter result actually, so better to remove it and
skip a gcc warning for unused variable.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Link: https://lore.kernel.org/r/1605239517-49707-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

These functions do not need to be exported.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201113113553.3411756-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
tcp: avoid indirect call in __sk_stream_memory_free()

Small improvement for CONFIG_RETPOLINE=y, when dealing with TCP sockets.
====================

Link: https://lore.kernel.org/r/20201113150809.3443527-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Both IPv4 and IPv6 needs it via a function pointer.
Following patch will avoid the indirect call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds an IPv4 routes encapsulation attribute
to the result of netlink RTM_GETROUTE requests
(e.g. ip route get 192.0.2.1).
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201113085517.GA1307262@twsSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Shannon Nelson says:

====================
ionic updates

These updates are a bit of code cleaning and a minor
bit of performance tweaking.

v3: convert ionic_lif_quiesce() to void
v2: added void cast on call to ionic_lif_quiesce()
    lowered batching threshold
    added patch to flatten calls to ionic_lif_rx_mode
    added patch to change from_ndo to can_sleep
====================

Link: https://lore.kernel.org/r/20201112182208.46770-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With a few more uses of true and false in function calls, we
need to give them some useful names so we can tell from the
calling point what we're doing.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of having two different ways of expressing the same
sleepability concept, using opposite logic, we can rework the
from_ndo to can_sleep for a more consistent usage.

Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The _ionic_lif_rx_mode() is only used once and really doesn't
need to be broken out.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We should be using the multicast sync routines for the multicast
filters.  Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().

Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We don't need to refill the rx descriptors on every napi
if only a few were handled.  Waiting until we can batch up
a few together will save us a few Rx cycles.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After the queues are stopped, expressly quiesce the lif.
This assures that even if the queues were in an odd state,
the firmware will close up everything cleanly.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Request a link check as soon as the netdev is registered rather
than waiting for the watchdog to go off in order to get the
interface operational a little more quickly.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change the order of operations in the link_up handling to be
sure that the queues are up and ready before we announce that
the link is up.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check PTR_ERR with IS_ERR to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201112144936.54776-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit bdb7cc64 ("ipv6: Count interface receive statistics on the
ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since
then, ipv6_skb_idev() is unused and make CC=clang W=1 warns:

  net/ipv6/exthdrs.c:909:33:
    warning: unused function 'ipv6_skb_idev' [-Wunused-function]

So, remove this unused function and a -Wunused-function warning.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201113135012.32499-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-11-14

1) Add BTF generation for kernel modules and extend BTF infra in kernel
   e.g. support for split BTF loading and validation, from Andrii Nakryiko.

2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
   on inlined branch conditions, from Alexei Starovoitov.

3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.

4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
   infra, from Martin KaFai Lau.

5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
   XDP_REDIRECT path, from Lorenzo Bianconi.

6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
   context, from Song Liu.

7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
   for different target archs on same source tree, from Jean-Philippe Brucker.

8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.

9) Move functionality from test_tcpbpf_user into the test_progs framework so it
   can run in BPF CI, from Alexander Duyck.

10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.

Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.

  [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
      https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
  net: mlx5: Add xdp tx return bulking support
  net: mvpp2: Add xdp tx return bulking support
  net: mvneta: Add xdp tx return bulking support
  net: page_pool: Add bulk support for ptr_ring
  net: xdp: Introduce bulking for xdp tx return path
  bpf: Expose bpf_d_path helper to sleepable LSM hooks
  bpf: Augment the set of sleepable LSM hooks
  bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Rename some functions in bpf_sk_storage
  bpf: Folding omem_charge() into sk_storage_charge()
  selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
  selftests/bpf: Add skb_pkt_end test
  bpf: Support for pointers beyond pkt_end.
  tools/bpf: Always run the *-clean recipes
  tools/bpf: Add bootstrap/ to .gitignore
  bpf: Fix NULL dereference in bpf_task_storage
  tools/bpftool: Fix build slowdown
  tools/runqslower: Build bpftool using HOSTCC
  tools/runqslower: Enable out-of-tree build
  ...
====================

Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add VSC8572 and VSC8574 in the PTP configuration
as they also support PTP.

The relevant datasheets can be found here:
  - VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572
  - VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20201112092250.914079-1-steen.hegelund@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Lorenzo Bianconi says:

====================
XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually
run inside the driver NAPI tx completion loop.

Convert mvneta, mvpp2 and mlx5 drivers to xdp_return_frame_bulk APIs.

More details on benchmarks run on mlx5 can be found here:
https://github.com/xdp-project/xdp-project/blob/master/areas/mem/xdp_bulk_return01.org

Changes since v5:
- do not keep looping over ptr_ring if the cache is full but release leftover
  pages running page_pool_return_page

Changes since v4:
- fix comments
- introduce xdp_frame_bulk_init utility routine
- compiler annotations for I-cache code layout
- move rcu_read_lock outside fast-path
- mlx5 xdp bulking code optimization

Changes since v3:
- align DEV_MAP_BULK_SIZE to XDP_BULK_QUEUE_SIZE
- refactor page_pool_put_page_bulk to avoid code duplication

Changes since v2:
- move mvneta changes in a dedicated patch

Changes since v1:
- improve comments
- rework xdp_return_frame_bulk routine logic
- move count and xa fields at the beginning of xdp_frame_bulk struct
- invert logic in page_pool_put_page_bulk for loop
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>

Convert mlx5 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 8.9Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 10.2Mpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/250460319fd868b7b5668fc1deca74dd42813a90.1605267335.git.lorenzo@kernel.org