- 21 Oct, 2015 2 commits
-
-
Mike Marciniszyn authored
commit d6f1c17e upstream. The lkey table is allocated with with a get_user_pages() with an order based on a number of index bits from a module parameter. The underlying kernel code cannot allocate that many contiguous pages. There is no reason the underlying memory needs to be physically contiguous. This patch: - switches the allocation/deallocation to vmalloc/vfree - caps the number of bits to 23 to insure at least 1 generation bit o this matches the module parameter description Reviewed-by:
Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
David Jeffery authored
commit c9eb256e upstream. There is an issue with xfs's error reporting in some cases of I/O partially failing and partially succeeding. Calls like fsync() can report success even though not all I/O was successful in partial-failure cases such as one disk of a RAID0 array being offline. The issue can occur when there are more than one bio per xfs_ioend struct. Each call to xfs_end_bio() for a bio completing will write a value to ioend->io_error. If a successful bio completes after any failed bio, no error is reported do to it writing 0 over the error code set by any failed bio. The I/O error information is now lost and when the ioend is completed only success is reported back up the filesystem stack. xfs_end_bio() should only set ioend->io_error in the case of BIO_UPTODATE being clear. ioend->io_error is initialized to 0 at allocation so only needs to be updated by a failed bio. Also check that ioend->io_error is 0 so that the first error reported will be the error code returned. Signed-off-by:
David Jeffery <djeffery@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
- 20 Oct, 2015 38 commits
-
-
Grant Likely authored
commit 7f5dcaf1 upstream. The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Tested-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David Daney authored
commit 3a496b00 upstream. If the internal call to of_address_to_resource() fails, we end up looping forever in of_find_matching_node_by_address(). This can be caused by a defective device tree, or calling with an incorrect matches argument. Fix by calling of_find_matching_node() unconditionally at the end of the loop. Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
Adrien Schildknecht authored
commit 1642d09f upstream. The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by:
Adrien Schildknecht <adrien+dev@schischi.me> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Marek Vasut authored
commit 9374e7d2 upstream. Add new ID for ASUS N10 WiFi dongle. Signed-off-by:
Marek Vasut <marex@denx.de> Tested-by:
-
Stephen Chandler Paul authored
commit 924f92bf upstream. Most of the time this isn't an issue since hotplugging an adaptor will trigger a crtc mode change which in turn, causes the driver to probe every DisplayPort for a dpcd. However, in cases where hotplugging doesn't cause a mode change (specifically when one unplugs a monitor from a DisplayPort connector, then plugs that same monitor back in seconds later on the same port without any other monitors connected), we never probe for the dpcd before starting the initial link training. What happens from there looks like this: - GPU has only one monitor connected. It's connected via DisplayPort, and does not go through an adaptor of any sort. - User unplugs DisplayPort connector from GPU. - Change in HPD is detected by the driver, we probe every DisplayPort for a possible connection. - Probe the port the user originally had the monitor connected on for it's dpcd. This fails, and we clear the first (and only the first) byte of the dpcd to indicate we no longer have a dpcd for this port. - User plugs the previously disconnected monitor back into the same DisplayPort. - radeon_connector_hotplug() is called before everyone else, and tries to handle the link training. Since only the first byte of the dpcd is zeroed, the driver is able to complete link training but does so against the wrong dpcd, causing it to initialize the link with the wrong settings. - Display stays blank (usually), dpcd is probed after the initial link training, and the driver prints no obvious messages to the log. In theory, since only one byte of the dpcd is chopped off (specifically, the byte that contains the revision information for DisplayPort), it's not entirely impossible that this bug may not show on certain monitors. For instance, the only reason this bug was visible on my ASUS PB238 monitor was due to the fact that this monitor using the enhanced framing symbol sequence, the flag for which is ignored if the radeon driver thinks that the DisplayPort version is below 1.1. Signed-off-by:
Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Filipe Manana authored
commit 1f9b8c8f upstream. While we are committing a transaction, it's possible the previous one is still finishing its commit and therefore we wait for it to finish first. However we were not checking if that previous transaction ended up getting aborted after we waited for it to commit, so we ended up committing the current transaction which can lead to fs corruption because the new superblock can point to trees that have had one or more nodes/leafs that were never durably persisted. The following sequence diagram exemplifies how this is possible: CPU 0 CPU 1 transaction N starts (...) btrfs_commit_transaction(N) cur_trans->state = TRANS_STATE_COMMIT_START; (...) cur_trans->state = TRANS_STATE_COMMIT_DOING; (...) cur_trans->state = TRANS_STATE_UNBLOCKED; root->fs_info->running_transaction = NULL; btrfs_start_transaction() --> starts transaction N + 1 btrfs_write_and_wait_transaction(trans, root); --> starts writing all new or COWed ebs created at transaction N creates some new ebs, COWs some existing ebs but doesn't COW or deletes eb X btrfs_commit_transaction(N + 1) (...) cur_trans->state = TRANS_STATE_COMMIT_START; (...) wait_for_commit(root, prev_trans); --> prev_trans == transaction N btrfs_write_and_wait_transaction() continues writing ebs --> fails writing eb X, we abort transaction N and set bit BTRFS_FS_STATE_ERROR on fs_info->fs_state, so no new transactions can start after setting that bit cleanup_transaction() btrfs_cleanup_one_transaction() wakes up task at CPU 1 continues, doesn't abort because cur_trans->aborted (transaction N + 1) is zero, and no checks for bit BTRFS_FS_STATE_ERROR in fs_info->fs_state are made btrfs_write_and_wait_transaction(trans, root); --> succeeds, no errors during writeback write_ctree_super(trans, root, 0); --> succeeds --> we have now a superblock that points us to some root that uses eb X, which was never written to disk In this scenario future attempts to read eb X from disk results in an error message like "parent transid verify failed on X wanted Y found Z". So fix this by aborting the current transaction if after waiting for the previous transaction we verify that it was aborted. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Jeff Vander Stoep authored
commit bf0c4e04 upstream. Move the poison pointer offset to 0xdead000000000000, a recognized value that is not mappable by user-space exploits. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Thierry Strudel <tstrudel@google.com> Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Jan Kara authored
commit ffeecc52 upstream. struct xfs_attr_leafblock contains 'entries' array which is declared with size 1 altough it can in fact contain much more entries. Since this array is followed by further struct members, gcc (at least in version 4.8.3) thinks that the array has the fixed size of 1 element and thus may optimize away all accesses beyond the end of array resulting in non-working code. This problem was only observed with userspace code in xfsprogs, however it's better to be safe in kernel as well and have matching kernel and xfsprogs definitions. Signed-off-by:
Jan Kara <jack@suse.com> Reviewed-by:
-
Darrick J. Wong authored
commit 2f123bce upstream. In the dir3 data block readahead function, use the regular read verifier to check the block's CRC and spot-check the block contents instead of directly calling only the spot-checking routine. This prevents corrupted directory data blocks from being read into the kernel, which can lead to garbage ls output and directory loops (if say one of the entries contains slashes and other junk). Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
-
Tyler Hicks authored
commit 5556e7e6 upstream. Consider eCryptfs dcache entries to be stale when the corresponding lower inode's i_nlink count is zero. This solves a problem caused by the lower inode being directly modified, without going through the eCryptfs mount, leaving stale eCryptfs dentries cached and the eCryptfs inode's i_nlink count not being cleared. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Richard Weinberger <richard@nod.at> [ luis: backported to 3.16: - use dentry->d_inode instead of d_inode(dentry) - adjusted context ] Signed-off-by:
-
Don Zickus authored
commit 3af4e5a9 upstream. It was reported that after 10-20 reboots, a usb keyboard plugged into a docking station would not work unless it was replugged in. Using usbmon, it turns out the interrupt URBs were streaming with callback errors of -71 for some reason. The hid-core.c::hid_io_error was supposed to retry and then reset, but the reset wasn't really happening. The check for HID_NO_BANDWIDTH was inverted. Fix was simple. Tested by reporter and locally by me by unplugging a keyboard halfway until I could recreate a stream of errors but no disconnect. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Matthijs Kooijman authored
commit 1fb8dc36 upstream. CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by:
Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Philipp Hachtmann authored
commit 951d3793 upstream. The driver used usb_get_serial_data(port->serial) which compiled but resulted in a NULL pointer being returned (and subsequently used). I did not go deeper into this but I guess this is a regression. Signed-off-by:
Philipp Hachtmann <hachti@hachti.de> Fixes: a85796ee ("USB: symbolserial: move private-data allocation to port_probe") Acked-by:
-
Peter Chen authored
commit 0521cfd0 upstream. The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Kinglong Mee authored
commit 18e3b739 upstream. ---Steps to Reproduce-- <nfs-server> # cat /etc/exports /nfs/referal *(rw,insecure,no_subtree_check,no_root_squash,crossmnt) /nfs/old *(ro,insecure,subtree_check,root_squash,crossmnt) <nfs-client> # mount -t nfs nfs-server:/nfs/ /mnt/ # ll /mnt/*/ <nfs-server> # cat /etc/exports /nfs/referal *(rw,insecure,no_subtree_check,no_root_squash,crossmnt,refer=/nfs/old/@nfs-server) /nfs/old *(ro,insecure,subtree_check,root_squash,crossmnt) # service nfs restart <nfs-client> # ll /mnt/*/ --->>>>> oops here [ 5123.102925] BUG: unable to handle kernel NULL pointer dereference at (null) [ 5123.103363] IP: [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.103752] PGD 587b9067 PUD 3cbf5067 PMD 0 [ 5123.104131] Oops: 0000 [#1] [ 5123.104529] Modules linked in: nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon parport_pc parport i2c_piix4 shpchp auth_rpcgss nfs_acl vmw_vmci lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi serio_raw scsi_transport_spi e1000 mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd] [ 5123.105887] CPU: 0 PID: 15853 Comm: ::1-manager Tainted: G OE 4.2.0-rc6+ #214 [ 5123.106358] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 [ 5123.106860] task: ffff88007620f300 ti: ffff88005877c000 task.ti: ffff88005877c000 [ 5123.107363] RIP: 0010:[<ffffffffa03ed38b>] [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.107909] RSP: 0018:ffff88005877fdb8 EFLAGS: 00010246 [ 5123.108435] RAX: ffff880053f3bc00 RBX: ffff88006ce6c908 RCX: ffff880053a0d240 [ 5123.108968] RDX: ffffea0000e6d940 RSI: ffff8800399a0000 RDI: ffff88006ce6c908 [ 5123.109503] RBP: ffff88005877fe28 R08: ffffffff81c708a0 R09: 0000000000000000 [ 5123.110045] R10: 00000000000001a2 R11: ffff88003ba7f5c8 R12: ffff880054c55800 [ 5123.110618] R13: 0000000000000000 R14: ffff880053a0d240 R15: ffff880053a0d240 [ 5123.111169] FS: 0000000000000000(0000) GS:ffffffff81c27000(0000) knlGS:0000000000000000 [ 5123.111726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5123.112286] CR2: 0000000000000000 CR3: 0000000054cac000 CR4: 00000000001406f0 [ 5123.112888] Stack: [ 5123.113458] ffffea0000e6d940 ffff8800399a0000 00000000000167d0 0000000000000000 [ 5123.114049] 0000000000000000 0000000000000000 0000000000000000 00000000a7ec82c6 [ 5123.114662] ffff88005877fe18 ffffea0000e6d940 ffff8800399a0000 ffff880054c55800 [ 5123.115264] Call Trace: [ 5123.115868] [<ffffffffa03fb44b>] nfs4_try_migration+0xbb/0x220 [nfsv4] [ 5123.116487] [<ffffffffa03fcb3b>] nfs4_run_state_manager+0x4ab/0x7b0 [nfsv4] [ 5123.117104] [<ffffffffa03fc690>] ? nfs4_do_reclaim+0x510/0x510 [nfsv4] [ 5123.117813] [<ffffffff810a4527>] kthread+0xd7/0xf0 [ 5123.118456] [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160 [ 5123.119108] [<ffffffff816d9cdf>] ret_from_fork+0x3f/0x70 [ 5123.119723] [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160 [ 5123.120329] Code: 4c 8b 6a 58 74 17 eb 52 48 8d 55 a8 89 c6 4c 89 e7 e8 4a b5 ff ff 8b 45 b0 85 c0 74 1c 4c 89 f9 48 8b 55 90 48 8b 75 98 48 89 df <41> ff 55 00 3d e8 d8 ff ff 41 89 c6 74 cf 48 8b 4d c8 65 48 33 [ 5123.121643] RIP [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.122308] RSP <ffff88005877fdb8> [ 5123.122942] CR2: 0000000000000000 Fixes: ec011fe8 ("NFS: Introduce a vector of migration recovery ops") Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit e9ae58ae upstream. We should ensure that we always set the pgio_header's error field if a READ or WRITE RPC call returns an error. The current code depends on 'hdr->good_bytes' always being initialised to a large value, which is not always done correctly by callers. When this happens, applications may end up missing important errors. Signed-off-by:
-
Max Filippov authored
commit 77d6273e upstream. call12 can't be safely used as the first call in the inline function, because the compiler does not extend the stack frame of the bounding function accordingly, which may result in corruption of local variables. If a call needs to be done, do call8 first followed by call12. For pure assembly code in _switch_to increase stack frame size of the bounding function. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ming Lei authored
commit 596f5aad upstream. There may be lots of pending requests so that the buffer of PAGE_SIZE can't hold them at all. One typical example is scsi-mq, the queue depth(.can_queue) of scsi_host and blk-mq is quite big but scsi_device's queue_depth is a bit small(.cmd_per_lun), then it is quite easy to have lots of pending requests in hw queue. This patch fixes the following warning and the related memory destruction. [ 359.025101] fill_read_buffer: blk_mq_hw_sysfs_show+0x0/0x7d returned bad count^M [ 359.055595] irq event stamp: 15537^M [ 359.055606] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 359.055614] Dumping ftrace buffer:^M [ 359.055660] (ftrace buffer empty)^M [ 359.055672] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 359.055678] CPU: 4 PID: 21631 Comm: stress-ng-sysfs Not tainted 4.2.0-rc5-next-20150805 #434^M [ 359.055679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 359.055682] task: ffff8802161cc000 ti: ffff88021b4a8000 task.ti: ffff88021b4a8000^M [ 359.055693] RIP: 0010:[<ffffffff811541c5>] [<ffffffff811541c5>] __kmalloc+0xe8/0x152^M Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ian Abbott authored
commit ad83dbd9 upstream. The "adl_pci7x3x" driver replaced the "adl_pci7230" and "adl_pci7432" drivers in commits 8f567c37 ("staging: comedi: new adl_pci7x3x driver") and 657f77d1 ("staging: comedi: remove adl_pci7230 and adl_pci7432 drivers"). Although the new driver code agrees with the user manuals for the respective boards, digital outputs stopped working on the PCI-7230. This has 16 digital output channels and the previous adl_pci7230 driver shifted the 16 bit output state left by 16 bits before writing to the hardware register. The new adl_pci7x3x driver doesn't do that. Fix it in `adl_pci7x3x_do_insn_bits()` by checking for the special case of the subdevice having only 16 channels and duplicating the 16 bit output state into both halves of the 32-bit register. That should work both for what the board actually does and for what the user manual says it should do. Fixes: 8f567c37 ("staging: comedi: new adl_pci7x3x driver") Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Maciej S. Szmigiero authored
commit ffa34de0 upstream. SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by:
Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
-
Nikhil Badola authored
commit f8786a91 upstream. Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by:
Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by:
Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by:
-
Nikhil Badola authored
commit 523f1dec upstream. USB controller version-2.5 requires to enable internal UTMI phy and program PTS field in PORTSC register before asserting controller reset. This is must for successful resetting of the controller and subsequent enumeration of usb devices Signed-off-by:
Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by:
-
Axel Lin authored
commit 9d835286 upstream. Don't set .read_flag_mask for adav803, it's for adav801 only. Fixes: 0c2d6964 ("ASoC: adav80x: Split SPI and I2C code into different modules") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 12c641ab upstream. In the logic in the initial commit of unshare made creating a new thread group for a process, contingent upon creating a new memory address space for that process. That is wrong. Two separate processes in different thread groups can share a memory address space and clone allows creation of such proceses. This is significant because it was observed that mm_users > 1 does not mean that a process is multi-threaded, as reading /proc/PID/maps temporarily increments mm_users, which allows other processes to (accidentally) interfere with unshare() calls. Correct the check in check_unshare_flags() to test for !thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM. For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM. For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM. By using the correct checks in unshare this removes the possibility of an accidental denial of service attack. Additionally using the correct checks in unshare ensures that only an explicit unshare(CLONE_VM) can possibly trigger the slow path of current_is_single_threaded(). As an explict unshare(CLONE_VM) is pointless it is not expected there are many applications that make that call. Fixes: b2e0d987 userns: Implement unshare of the user namespace Reported-by:
Ricky Zhou <rickyz@chromium.org> Reported-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
NeilBrown authored
commit efcbc04e upstream. It is unusual to combine the open flags O_RDONLY and O_EXCL, but it appears that libre-office does just that. [pid 3250] stat("/home/USER/.config", {st_mode=S_IFDIR|0700, st_size=8192, ...}) = 0 [pid 3250] open("/home/USER/.config/libreoffice/4-suse/user/extensions/buildid", O_RDONLY|O_EXCL <unfinished ...> NFSv4 takes O_EXCL as a sign that a setattr command should be sent, probably to reset the timestamps. When it was an O_RDONLY open, the SETATTR command does not identify any actual attributes to change. If no delegation was provided to the open, the SETATTR uses the all-zeros stateid and the request is accepted (at least by the Linux NFS server - no harm, no foul). If a read-delegation was provided, this is used in the SETATTR request, and a Netapp filer will justifiably claim NFS4ERR_BAD_STATEID, which the Linux client takes as a sign to retry - indefinitely. So only treat O_EXCL specially if O_CREAT was also given. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Cristina Opriceana authored
commit 41d903c0 upstream. Negative return values are not supported by iio_event_poll since its return type is unsigned int. Fixes: f18e7a06 ("iio: Return -ENODEV for file operations if the device has been unregistered") Signed-off-by:
Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Cristina Opriceana authored
commit 1bdc0293 upstream. Change return value to 0 if no device is bound since unsigned int cannot support negative error codes. Fixes: f18e7a06 ("iio: Return -ENODEV for file operations if the device has been unregistered") Signed-off-by:
-
Lars-Peter Clausen authored
commit 7abad106 upstream. The different devices support by the adis16480 driver have slightly different scales for the gyroscope and accelerometer channels. Signed-off-by:
-
Lars-Peter Clausen authored
commit c689a923 upstream. Add inverse unit conversion macro to convert from standard IIO units to units that might be used by some devices. Those are useful in combination with scale factors that are specified as IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will contain the maximum raw value the sensor will generate and the numerator the value it maps to in a specific unit. Sometimes datasheets specify those in different units than the standard IIO units (e.g. degree/s instead of rad/s) and so we need to do a unit conversion. From a mathematical point of view it does not make a difference whether we apply the unit conversion to the numerator or the inverse unit conversion to the denominator since (x / y) / z = x / (y * z). But as the denominator is typically a larger value and we are rounding both the numerator and denominator to integer values using the later method gives us a better precision (E.g. the relative error is smaller if we round 8000.3 to 8000 rather than rounding 8.3 to 8). This is where in inverse unit conversion macros will be used. Marked for stable as used by some upcoming fixes. Signed-off-by:
-
Lars-Peter Clausen authored
commit 81665372 upstream. Use the correct scale for the adis16448 gyroscope output. Signed-off-by:
-
Masahiro Yamada authored
commit 64526370 upstream. Currently, devres_get() passes devres_free() the pointer to devres, but devres_free() should be given with the pointer to resource data. Fixes: 9ac7849e ("devres: device resource management") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Sudip Mukherjee authored
commit bab383de upstream. parport_find_base() will implicitly do parport_get_port() which increases the refcount. Then parport_register_device() will again increment the refcount. But while unloading the module we are only doing parport_unregister_device() decrementing the refcount only once. We add an parport_put_port() to neutralize the effect of parport_get_port(). Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Xiao Guangrong authored
commit 6f691251 upstream. We got the bug that qemu complained with "KVM: unknown exit, hardware reason 31" and KVM shown these info: [84245.284948] EPT: Misconfiguration. [84245.285056] EPT: GPA: 0xfeda848 [84245.285154] ept_misconfig_inspect_spte: spte 0x5eaef50107 level 4 [84245.285344] ept_misconfig_inspect_spte: spte 0x5f5fadc107 level 3 [84245.285532] ept_misconfig_inspect_spte: spte 0x5141d18107 level 2 [84245.285723] ept_misconfig_inspect_spte: spte 0x52e40dad77 level 1 This is because we got a mmio #PF and the handler see the mmio spte becomes normal (points to the ram page) However, this is valid after introducing fast mmio spte invalidation which increases the generation-number instead of zapping mmio sptes, a example is as follows: 1. QEMU drops mmio region by adding a new memslot 2. invalidate all mmio sptes 3. VCPU 0 VCPU 1 access the invalid mmio spte access the region originally was MMIO before set the spte to the normal ram map mmio #PF check the spte and see it becomes normal ram mapping !!! This patch fixes the bug just by dropping the check in mmio handler, it's good for backport. Full check will be introduced in later patches Reported-by:
Pavel Shirshov <ru.pchel@gmail.com> Tested-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Adam Lee authored
commit 89c043a6 upstream. Pericom PI7C9X795[1248] are Uno/Dual/Quad/Octal UART devices, this patch enables them, also defines PCI_VENDOR_ID_PERICOM here. Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit b2fb5b1a upstream. DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and the size of bounce buffer is 512 bytes. However if the host initiates OUT transfers of size more than 512 bytes (and non max packet aligned), the driver throws a WARN dump but still programs the TRB to receive more than 512 bytes. This will cause bounce buffer to overflow and corrupt the adjacent memory locations which can be fatal. Fix it by programming the TRB to receive a maximum of DWC3_EP0_BOUNCE_SIZE (512) bytes. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Mark Rustad authored
commit 7aa6ca4d upstream. Set the PCI_DEV_FLAGS_VPD_REF_F0 flag on all Intel Ethernet device functions other than function 0, so that on multi-function devices, we will always read VPD from function 0 instead of from the other functions. [bhelgaas: changelog] Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Mark Rustad authored
commit 932c435c upstream. Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through function 0 to provide VPD access on other functions. This is for hardware devices that provide copies of the same VPD capability registers in multiple functions. Because the kernel expects that each function has its own registers, both the locking and the state tracking are affected by VPD accesses to different functions. On such devices for example, if a VPD write is performed on function 0, *any* later attempt to read VPD from any other function of that device will hang. This has to do with how the kernel tracks the expected value of the F bit per function. Concurrent accesses to different functions of the same device can not only hang but also corrupt both read and write VPD data. When hangs occur, typically the error message: vpd r/w failed. This is likely a firmware bug on this device. will be seen. Never set this bit on function 0 or there will be an infinite recursion. Signed-off-by:
-
Bob Copeland authored
commit 3633ebeb upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by:
Alexis Green <agreen@cococorp.com> Tested-by:
Jesse Jones <jjones@cococorp.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
